I need some updates

Similar Questions

• I can't watch DVDs on my computer it say I need some update the driver for the video card

  I can't watch DVDs on my laptop it tell me I have to install a driver for the video card update

  Hello

  It seems that you try to update the drivers for DVD. I offered to you to update the video card reader.
  Try update video card driver.
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  See also:
  http://Windows.Microsoft.com/en-us/Windows-Vista/video-cards-frequently-asked-questions

• Satellite L50-A-19N - need to update driver nVIDIA - some games do not work

  Hello

  I have the problem with drivers nVIDIA for my 740 M,
  The thing is that I can not update drivers because any drivers I have install my core 580 MHz GPU clock drops everything at stake. But when I return to the first drivers that I had on my base GPU clock portable (326.60) is 1058 MHz all-in game.

  The problem is that I can't run some games because I need to update the drivers.
  Just some games do not work on 326.60.

  I tried to contact customer support, but the page is not available. -.-'

  Hello

  First of all, please note that use of the 3rd third-party drivers is at your own risk.

  You must use the drivers supplied by Toshiba driver page because these drivers are changed and designed for mobile use.

  This driver supports the overheating protection, which means that in the cases that the temperature of the GPU would rise to higher level, the driver would clock down the GPU to maintain the temperature at the lower level.

  Of course, as I said above, you might try to test the drivers from nVidia page but it is at your own risk.

• Need to change the control of user account for some updates

  Why are what some updates not to install until I have change the User Account Control NEVER notify?  Are more often the upgrades to Office 2007 but today 6 1 which was not KB2160841 for .NET Framework 4.

  When I get the update has no notification, error codes are usually 646 but for KB2160841 was 80070005.  After I changed the User Account Control never notify and restarted, 6 updates succeed.  I've been changing this setting to get updates since May 15, 2010 after receiving an email in response to the request of Service SRX1131577276.

  run the fixit. It should resolve the error 646. "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• I get a message when you move a file of LR6 to Photoshop. It says I need to update Camera Raw to make it work properly in Photoshop. So far I have not been able to find the update and could use some help.

  Hello

  I work between LR6 and Photoshop CS6. I now get a message that I need to update Camera Raw in LR6, when I send a photo to CS6 for further editing, but when I look at the updates I'm not finding this one, nor any other updates are needed for my software. I'd appreciate feedback I can get on this subject. Thank you. Gary

  The latest version of Camera Raw compatible with Photoshop CS6 is Camera Raw 9.1.1. There will be no updates available for Photoshop CS6. This message tells you that Lightroom has additional changes that your version of Camera Raw is perhaps not able to interpret when you send an image from Lightroom to Photoshop. You are given the choice. You can open the image in any case, or you can let Lightroom create a copy that includes all adjustments of Lightroom and send this copy to Photoshop. In most cases, you want to make the second choice. When this warning message is displayed, I think that there is a checkbox to indicate not not to show it again. The only way that you can solve the problem would be to upgrade to Photoshop CC 2015. If not, simply select the option to edit a copy with Lightroom adjustments.

• I need some information on the new iMessage on ox10

  I need some information about the new features on I update to iOS 10 message

  Howdy iotti!

  I understand you want to learn more about iMessage on iOS 10. There are a few new features!

  See these pages for a quick look on the update options:

  Use effects of message with iMessage on your iPhone, iPad and iPod touch
  Use iMessage apps on your iPhone, iPad and iPod touch
  Use #images with Messages in iOS 10

  If you have a question about a specific feature, you are in the right place to help! Don't forget to reply to this topic with specific questions.

  Take care!

• I downloaded the new version 25 times and it still saying I need to update it please help

  I have a problem with banking and paypal who say I need to update my browser went to feedback from firefox and the screen says I need to update. I get crazy and do not want to use chrome or using internet explorer, I was very happy with firefox pleasse me

  Your User Agent shows you Firefox 3.6.3 installed. Some add-ons can cause an incorrect to show User Agent. In strongly suspect BLNGBAR as indicated in your User Agent (click on "Details more system" to the right of your original question, scroll down to see your User Agent):

  • Mozilla/5.0 (Windows; U; Windows NT 6.1; en - us; RV:1.9.2.3) Gecko/20100401 Firefox/3.6.3 BLNGBAR

  BLNGBAR can be this: http://blingee.com/plus
  
  Uninstall it if you

  • See-> http://support.mozilla.com/en-US/kb/Uninstalling+add-ons
  • See-> http://support.mozilla.com/en-US/kb/Cannot%20uninstall%20an%20add-on
  • See-> http://kb.mozillazine.org/Uninstalling_toolbars

  Once which is uninstalled, follow the instructions in this article to reset your User Agent:

  • See-> https://support.mozilla.com/en-US/kb/websites%20or%20add-ons%20incorrectly%20report%20incompatible%20browser#w_reset-your-user-agent

  What is a User Agent: http://en.wikipedia.org/wiki/User_Agent

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check-> http://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• Satellite Pro A120: Need to update the BIOS after upgrade CPU

  Hello

  I have a Toshiba Satellite Pro A120 and I need to update the bios of a change in cpu cause.
  The laptop works very well, but for some reason any with the new processor fan runs always full.

  A lot, I searched but found nothing.
  The model number is PSAC1E-0QL04CG3 of ideas where I can find the bios?

  THX in advance,
  John

  Hello

  First of all: update BIOS doesn t help you.
  Why do you think that BIOS update should help reduce the activity of fan?

  I guess that your new processor is faster. Right?
  So it offers more performance and this leads to higher heat dissipation... so finally the CPU must be cooled and this can be done only if the cooling module would turn faster you agree with me?

  By the way: the update of the BIOS is on the page of the Toshiba UE driver. Since the satellite Pro A120 is very old series, you will need to search for drivers in area Archive (Type of product-> Archive)

• I need to update BIOS on Satellite L750?

  Received the message of Tempro following earlier:
  This TEMPRO alert is to inform you of an update of the driver for your specific laptop model. This is based on the release date of the original software.
  This Bios update adds functionality to your system

  Download zip is version 2.70 and on the audit of the system, I have version 2.30 installed on 23/03/2011, even if only, I bought this laptop on the 18/04/2012

  Probably Tembro has identified some improvements that could be made in updating, but * I just can't find it "an increase in the feature" this update provides * and if I need it because I'm not aware of any problems. Everything works perfectly.
  Sorry to waffle on, but in short, should I upgrade or not?

  Any advice appreciated,
  See you soon,.
  Anthony

  N ° if everything works perfectly don't change anything.
  My advice to you is: remove tempro system and be happy. I'm two years old P500 with BIOS original and original pilots (own recovery image installation) and I always use it with the factory settings. It works perfectly.

  All the updates you need are updated Windows (updates) and updates of the antivirus application.

  No more than that.

• Satellite L850 PSKG6A: need to update the graphics driver to play games

  Hello

  I played a few games on my Satellite L850, but some games says I need to update my video card driver. Auto detect Intel said that my video card software has been changed.

  Is it possible to update my video card without any problems.
  Thank you

  Model: Satellite L850 PSKG6A-00R00H

  Hello

  The laptop supports a graphic chip Intel HD 4000.
  Usually, you could use and download the page Intel graphics driver.

  http://Downloadcenter.Intel.com/Detail_Desc.aspx?lang=eng & changeLang = true & dId = 22376 DWNL

  It is the zip package.
  To update the driver unzip the package first.
  Then go to Device Manager, choose the graphics card, choose set to update driver.
  Now you must point to the unzipped folder containing the driver files.
  Apply and finish :)

• Error code: 800 b 0100 (some updates were not installed)

  I GET THIS MESSAGE WHEN I TRIED TO INSTALL AN UPDATE "SOME UPDATES WERE NOT INSTALLED". INCLUDES THE MESSAGE "CODE 800 B 0100 WINDOWS UPDATE ENCOUNTER AN UNKNOW ERROR".

  HOW CA IT BE CORRECTED

  If you receive error 800b0100 in Windows Update, it means that a file needed by Windows Update is corrupted or missing.

  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-800B0100

• cannot install update KB2481109, error "some updates could not be installed.

  Original title: update Windows XP Pro KB2481109.

  My computer is constantly requiring an 'important' update and it is still KB2481109, but it's always with: "some updates could not be installed.  I just spent my ware protection to MS Security Essentials, then have it set it to scan any and all the weeks do a full Scan rather than simply a
  A quick.  I downloaded MS Fix - It and whenever I ask him to check the Windows updates, it is said that Windows Update needs to be repaired, goes through the process and says it's fixed, but still it will not load.

  The diagnostic report detailed shows like questions: by default Windows Update of data locations have changed but then shows repaired; also shows: one or more Windows Update are configured incorrectly then that repaired watch.

  Is there someone who can help out me?  This is probably an easy question for someone, but I have no idea and looked at different sites for help and nothing seems to work.

  Hello

  1. what fixit did you run?

  2. you remember to make changes to the computer before this problem?

  Follow the steps mentioned below and check.

  Method 1: See the article and run the Fixit to reset Windows Update components.
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
   http://support.Microsoft.com/kb/322756

  Method 2: You can temporarily disable your antivirus and then try to download the update.
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: You can also read the following article and check.

  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
   http://support.Microsoft.com/kb/322756

  Method 4: You manually download the security update.
  Update security for Windows XP (KB2481109)
  http://www.Microsoft.com/download/en/details.aspx?ID=11625

  Reference: How to solve the common Windows Update, Microsoft Update and Windows Server Update Services installation issues
  http://support.Microsoft.com/kb/906602

• SEARCHING the catalog Microsoft Update don't miss some updates that meet the keyword?

  I want to clean install windows 7 and add all updates up to now since SP1 in some computers in offline mode, so now that I turned to the Microsoft Update Catalog.

  I first searched Microsoft Update catalog with the keyword 'Windows 7' and then sort the result of "overhaul". As shown in the half superior of the image below, the last update to is born on 7/12/2016.

  Then, I searched with 'windows 7 Internet explorer' and Moreover, sorted in order to exclude updates for IE 8 ~ 10. The result is displayed in the lower part of the image below.

  Surprisingly, some updated 8/8/2016 updates are released, whose name has also key words "windows 7"! What does it mean? When I searched "Windows 7", not all updates of fitting are listed! Even more recent updates are missing!

  Microsoft Update Catalog is reliable? How can I get what I need?

  

  Rather than using the catalog, install the cumulative hotfix that contains all the post SP1 updates. Instructions are here:

  Microsoft releases the package of rolls for windows 7, which contains all the post Service pack 1 updates

  The latest cumulative package can be found here:

  Update Rollup for Windows 7 SP1 convenience

• Need some clarification for upgrade

  Experts in the morning,

  I need some references for the process to upgrade between 10 and 11 g.

  I always use DBUA to update our database.

  
  

  For most administrators recommend NOT following options. I am confused.

  Experts, please guide me to travel in the right direction.
  

  > > Is this really necessary until the upgrade process, which is the real benefit?

  SQL > exec DBMS_STATS. GATHER_DICTIONARY_STATS;

  
  

  > > To activate my database in NOARCHIVELOG MODE, it provides massive difference during the upgrade process?

  SQL > alter the noarchive base newspaper;

  
  

  > > TRUNCATE table audit SYS. AUD$

  SQL > truncate table SYS. Storage of AUD$ drop;

  
  

  > > Depends on length process,.

  Size of the database

  Number of synonyms

  Number of data files

  Size of the recovery logs

  Number of installed components

  For the types of data and not the XDB user objects.

  > > Deletion of FILES NETWORK completely from 10 g $ORACLE_HOME, creating newfiles in 11 g $ORACLE_HOME

  
  

  $ rm - rf tnsnames.ora

  $ rm - rf listener.ora

  
  

  Thanks in advance.

  Hello

  > Is this really necessary until the upgrade process, which is the real benefit?

  SQL > exec DBMS_STATS. GATHER_DICTIONARY_STATS;

  1 prior to advantage, was causing problem - degrade the performance of your database? What its not beneficial?

  Logically, if you see the dictionary is on your information about your database - default provided with products and items of custom applications. Now during the upgrade - given that the term refers to a new addition of things monofores or gout or new table segmetns is getting added to your existing dictionary. Now, if I don't keep his stats up to date on my dictionary itself then update itself is the process of taking time. It will hit my sqls himself upgrade performance

  Thus, in order to reduce this impact - prior to your downtime in pre-upgrade task you can collect stats on your dictionary. While during upgrade if you run / run research in its stats its would take very little time to collect minor statistics and it will not affect the order of execution of ddl or dml SQL out that focus on changes in your dictionary.

  > To activate my database in NOARCHIVELOG MODE, it provides massive difference during the upgrade process?

  SQL > alter the noarchive base newspaper;

  2. I don't know who s/n, suggested the above step to achieve. Not a good, better I would have fired the DBA immediately. Despite that I have perform the update level or no, keep you the database in log mode archive.

  To upgrade, its gives no performance improvement for your upgrade process. What is your intention on the upgrade?

  You want to run through the upgrade in 15 minutes? Listen you dictionary database or application objects develop the direcrtly would increase the upgrade. Is not all synonyms - maybe a few times - up to what the table - dictionary of data updated in upgrade tis - for example bitand 12 c on synonyms function table is changed, so his punches performance - it is not a must and was cause depends on the base of the environment for the environment. Reason for this how you store your environment that will reduce the burden of upgrading

  > TRUNCATE table audit SYS. AUD$

  3. I hope I answered this question is another thread

  > Length upgrade depends on.

  Size of the database

  Number of synonyms

  Number of data files

  Size of the recovery logs

  Number of installed components

  For the types of data and not the XDB user objects.

  It is partially dependent on the data dictionary and how clean it is, whatever. Clean - number sense of invalids and statistics.

  Number of components installed in a concern - it might be a minimum until we reached and deliver the bad SQL with performance.

  Size of database and data file and restore logs is out of reach... If my database is to have 10 k datafles, my upgrade script will go and touch all the header files of data blocks, is indicated in MOS linsks or docs. No, he will not be at level of offers to work on something of dictionary and Oracle database metadata.

  > Deleting FILES of network completely from 10 g $ORACLE_HOME, creating newfiles in 11 g $ORACLE_HOME

  You have any load 2 mins to copy files during upgrade spending. Fact the DBA is so busy that he can afford 2 mins tasks.

  It is out of reach, you have to manage.

  -Pavan Kumar N

• I need to update my server password

  I have a Mac - OS V Yosemite 10.10.3 - and Adobe Dreamweaver CS 5.5.

  Night before last, 06/05/15, I got a warning window in the upper right corner of my Mac that says something necessary to install... those never say what will change.  I gave him.

  Since that time, I have been unable to FTP my files to my remote site:

  Now, I get an FTP error when I tried to access my remote files.

  "An FTP error occurred - cannot establish a connection to the host."  Dreamweaver can connect to the host 'ftp.startlogic.com '.

  I called the server and somehow my password for the server no longer worked (he had worked two days earlier) so my server password has been changed.

  Now, the server supports the person says I need to update my server password to reconnect to the Dreamweaver and I can't understand how to do this in the section management of the Site.

  Never did what I use a third party ftp (much better in my opinion) BUT I guess you could go to the Site > Manage Sites > select the site you want to manage > click on the pencil icon (edit) at the bottom of the places Panel > select servers and set up information in this Panel. If the site already exists in the site Panel, click the pencil to change the setting (I guess for that you have configured this information initially) - choose ftp in the 'Connect' tab drop-down menu "basic" fill in the connection information, take a deep breath and see what happens.

  It is not possible that your server password could change unless this was done manually or with the Web host has changed without informing you, as some do.

  EDITED.

  CS5.5 may be slightly different:

  Site > Manage Site > Select site from list > Edit > advanced > Remote Info > choose ftp from the access drop > fill in the information and make sure you check the box "use passive ftp mode."