Cannot take account of 11.5 GB used space on the drive "C".

Similar Questions

• Cannot convert Server 2008 R2 Machine get error: Instant The VSS cannot be stored, because there is not enough space on the source volumes or because the source computer does not all NTFS volumes. Error code: 2147754783 (0x8004231F).

  I have a couple of server 08 R2 machines where the P to V conversion fails.  I did some research and the problem seems to be related to the system reserved Partition that has 0% available 100 MB free space.  Conversion fails with the error below.

  VSS snapshots cannot be stored because there is not enough space on the source volumes or because the source computer has not all NTFS volumes. Error code:
  2147754783 (0x8004231F).

  
  

  Someone had this problem and came to the top with a solution or to get around?
  

  
  

  Thanks in advance
  

  Guessed it.  My snapshots Appassure did not also exist with a similar error, so that's what I did to solve it.  My servers now converted without any problem.

  1. Open disk management.
  2. Look at the partition of the PRS and see if it is 100% full.
     • If Yes, proceed to step 3.
     • If this is not the case, check if there are readers who have no more of 300 MB free (minimum requirement to use VSS).
  3. Click a drive, select properties and then select the instant snapshots tab.
  4. Ensure that all shadow copies are disabled and no limit on all players.
  5. Go to the partition of the SRP and assign the B:drive letter.
  6. Open the B: drive via disk management, and then locate the folder System Volume Information. Note: if necessary, change the folder options so that you can view hidden files, folders and drives.
  7. Right-click the System Volume Information folder, and then select Properties.
  8. On the Security tab, click Edit, and then add the group with full control everyone in the folder.
  9. Open the System Volume Information folder (you should see log files are full), open a running as an administrator command prompt and then type the following commands to unload the filter driver.
     • B:
     • B:\>FLTMC UNLOAD AAFSFLT
  10. Navigate to the System Volume Information folder, and then type the following commands:
      • B:\>CD System Volume Information
      • B:\System Volume Information > AALOG_ DEL * (this will remove all of the log files, and then re-create a new)
      • B:\System Volume Information > CD\
      • B:\>FLTMC LOAD AAFSFLT
  11. Close the command prompt window.
  12. In Windows, right click on the reserve system folder and remove the Group everyone.
  13. In Disk Manager, remove the B: drive (and click Yes when prompted with a warning window).

• Satellite L500-19Z - cannot use WLan because the driver has been removed

  I accidentally uninstalled REALTEK WLAN driver and now I can't use the wireless installation.
  I tried to use system restore to recover before the uninstall, but the system restore won't restore (tells me that anti-virus prevents it probably, but I stopped my loading anti-virus, so this isn't the problem).

  I then allowed Windows 7 to find the material and it re-installed the driver, but I still can't use WLAN.
  Anyone got advice to help me get out of the mess I made for myself?

  Hello

  To my knowledge, this laptop supports the Realtek RTL8191SE WLan card 802.11bgn.
  You can find the Wlan driver here:
  http://APS2.toshiba-tro.de/WLAN/?page=downloads

  I think that it shouldn't be a big problem to get this working again ;)

  Good bye

• Impossible to sort according to size service set and used space in the Vsphere 5 client

  Hello guys,.

  I am unable to sort size set service based and used customer area Vsphere 5 any bug? or any workaround for this?

  1. click on any specific data store

  2. go in the virtual machines tab.
  3. try to not sort coloumn - funded space / used space - no reaction.
  4. also sort all coloumn take very long compared to 4.0.
  Thank you.
  -Nice

  The case of the support city...

  "I found PR for this issue and currently, this fix is moved to vCenter 5.0 release U3. ETA for this version is currently seven 2013. »

• EM takes about 5.5 GB of free space in the tablespace Sysaux

  Hi all
  
  EM takes about 5.5 GB of space in the sysaux tablespace. I questioned the v$ sysaux_occupants to see the use of the space. Database is 10g 10.1.0.2.0.
  
  SQL > Select * from v$ sysaux_occupants where occupant_name like '% EM % ';
  
  OCCUPANT_NAME SCHEMA MOVE_PROCEDURE MOVE_PROCEDURE_DESC SPACE_USAGE_KBYTES OCCUPANT_DESC
  --------------- -------------------- ------ ------------------------------ ------------------------------ ------------------
  Emd_maintenance.move_em_tblspc EM Enterprise Manager repository SYSMAN procedure move for Enterprise Manager repository 5798528
  
  
  
  SQL >
  
  
  How can we reduce this use of space in the Sysaux tablespace instead of create a new basis for EM & this move towards this tablespace? I've seen some info on the reduction of the use of space AWR. But how can do us with the use of EM space? Here are the problems involved or we have to its own tablespace only of EM?
  
  
  Any help will be greatly appreciated.
  
  Thank you
  Nilesh.

  Hello

  doc
  Manage Tablespace SYSAUX
  http://download.Oracle.com/docs/CD/B28359_01/server.111/b28310/tspaces010.htm
  http://www.nalanta.com/2008/11/02/space-management-in-SYSAUX-tablespace/

  Kind regards
  Tom

  Published by: Soli on 17.8.2009 09:52

• When storing photos on iCloud to use space on the iPhone too?

  I have an iPhone 6 Plus.  If I store photos in iCloud there also use space on my iPhone? The reason why I ask is because I have a friend who has a Samsung phone and it has several thousand pictures on this topic, but it can install an SD card inside the phone and is where his photos. It uses no space on his phone.  I wonder if I can do the same thing using iCloud?

  iCloud is a synchronization system, not an external 'hard drive '. If you remove them on your device, they will remove icloud. To increase the available space, go settings/iCloud/Photos and select optimize iPhone/iPad storage. That will reduce the space required by 90% when it is fully effective. There is no SD card option.

• RDM use space on the store data or SAN

  Dear all,

  According to my understanding, RDM creates a mapping file in the data store in the folder of the virtual machine, but it consumes all of the space on the data store, but yes, on SAN. I have a virtual machine with 50 GB vmdk and a physical RDM 50 GB, the machine's memory is 8 GB so vsphere client, seems space put into service for machine to 108. So it means that 50 GB of RDM is also included in funded space shown in vsphere client.

  The same look at space of data store, the space of data store configured showing also 50 GB RDM counted in the space provided, where, as the data must be on the SAN, can someone explain why in the data store space calculation as rdm as space accrued on himself.

  Please let me know if my question is not clear.

  Thank you

  As the rdm file uses no space disk (only a few bytes of the header/descriptor file), the disk space is still available for other virtual machines.

  André

• Cannot use spaces at the beginning of the second line of wrapped text

  Hello!

  My question is simple:

  When I got the text inside a text box, and it wraps at the end of the box, why can't put spaces at the beginning of the second line (the wrapped)?

  Because the beginnings of words always wrap to the next line, with spaces accumulate after the word at the end of the previous line.  Any text automatically formatting process skin for it.

  If you want seats at the front, press return first, to force the start of a new line, and then type your spaces.

  -Christmas

• How much space on the drive of podcasts use. ?

  My computer is getting really slow, and I download a lot to teach the poscasts.  These slow down the computer?  Thank you.

  Files as such do not slow down the computer - programs that run in the context of do.

  You must check what does using MSCONFIG and then set the options for each program you want, using the options of the program.

  Also ensure that you have an up-to-date virus and a decent a-squared scanner, which you need to update from each weekly analysis.

• Open both used ROM cd/DVD disks, it shows the used space on the disks, but he wants any format

  I have 2 dvd/cd rw drives on my computer and now all they want to do is any format.  It shows how much mem. on the disc, I can even see the files using isobuster, but through my computer and clicking on the cd/dvd players, they just want to get in shape all the time, I always can I burn with them well?

  any help will be great thanks,

  urlockgaur,
  Thank you for visiting the Microsoft Answers community forum.

  This problem just started recently?  Any changes made to your computer just before this show appeared, like new hardware or installed software or updates applied?

  If you have installed a new CD/DVD software it may be at the origin of the conflict.  Try to uninstall all software disc that may have come with your disks and then test it.

  Try to do a system restore to before the problem started.

  To restore the operating system to an earlier point in time, follow these steps:
  Click Start, type system restore in the search box, and then click System Restore in the list programs.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  In the System Restore dialog box, click on choose a different restore point and then click Next.
  In the list of restore points, click a restore point created before you started having the problem, and then click Next.
  Click Finish.
  The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  Let us know if it works or if you need more information.
  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• used space on the hard drive is much more than space unused theres 40 GB in the installations of windows preivus! Should / can I clean it as I just 17% left free space left

  or if not what your addvice please!  ;-)

  or if no what is your opinion please!  ;-)

  Not enough information really.
   
  What - what are you trying to do?
  What is this "40 GB in the previous installations of windows" do you speak?
  Can you be more precise all around?
   
  17% of how much?  After all, if I have 17% free on a system, which could be > 600 GB with a single physical hard disk and a single partition.

• Cannot use disk utility to create the partition of the free space on the external USB drive.

  I have a red 3 TB Western Digital drive in a USB hard drive docking station.

  The reader is GPT, and I have two volumes on it (a single volume is "Microsoft reserved", another volume is NTFS).

  The other part of my drive is 1.5 TB of free space. I want to create a new partition with free space so that I can put backups Time Machine encrypted external hard disk.

  I checked free space on the drive with my Windows machine:

  
  DISKPART> list disk
  
  Disk ### Status Size Free Dyn Gpt
  
  -------- ------------- ------- ------- --- --- 
  
  Disk 0 Online 167 GB 20 GB
  
  Disk 1 Online 465 GB 0 B *
  
  Disk 2 Online 2794 GB 1526 GB *
  
  DISKPART> select disk 2
  
  Disk 2 is now the selected disk.
  
  DISKPART> list part
  
  Partition ### Type Size Offset
  
  ------------- ---------------- ------- -------
  
  Partition 1 Reserved 128 MB 17 KB
  
  Partition 2 Primary 1267 GB 129 MB 
  
  DISKPART>
  

  DiskPart displays 2 partitions - a 128 MB and the other GB 1267 with 1526 MB of free space.

  I took the hard drive of my MacBook Pro running OS X El Capitan 10.11.3 and pulled towards the high disk utility, but for some reason, that it does not resemble the disk utility it is to see the free space, so I can't create a new volume.

  Here are a few screenshots:

  ... of the physical disk in disk utility (notice how it doesn't seem be all unallocated space on the disk to create a new volume):

  

  ... of the NTFS volume in disk utility:

  

  ... of information for the drive in disk utility:

  

  ... of information for the NTFS volume in disk utility:

  

  ... of the partitioning settings page. Notice how the sign is grayed out (I can't create another partition):

  

  

  I'm a new Mac user. My company recently gave me a Mac, so the first thing I want to do is to create a new partition on this external USB drive to put backups Time Machine figures on it.

  In the research I did find a way to do it on a mac computer without erasing the drive and starting over. But you can go to your windows computer and partition the free space of disks. Then use the mac to set the free space as mac os extended journaled. Here's what I found. http://www.PCWorld.com/article/2066191/how-to-partition-a-hard-drive.html the only other way would be to copy the file on the external drive, somewhere, so you can delete it and re partition for windows and mac. Then reinstall windows files. I'm not familiar with windows systems.

• Cannot be used on Windows 7 Sony bluetooth headset because the driver is missing.

  Original title: Question about bluetooth drivers

  Hello

  I have a problem with my Sony bluetooth headset on my Macbook bootcamp Win 7.

  My helmet model is MDR-10RBT. My Win 7 detected the headset in the bluetooth device section, but I can't use it because the driver is missing. (There is an exclamation mark in the bottom left of the icon) The headset works fine when I start the o/s under OSX tho. I have already installed to the disk of bootcamp, nothing helps.

  http://store.Sony.com/premium-Bluetooth-wireless-headphones-zid27-MDR10RBT/cat-27-CATID-all-headphones-earbuds

  I went here and it seems that there is no driver. I sent them an email and support confirms there is that no driver is not providing them.

  ----------

  Please note that pilots must be pre installed in your Microsoft windows 7 OS. If your machine is not with the drivers, that we invite you to contact Microsoft because they are not available for download from Sony.

  ----------

  How can I download the drivers for Windows? I don't know how to start.

  Any help would be greatly appreciated.

  I had the same problem, but I solved the problem thanks to HP, because I have their laptops for business.

  Their bluetooth device driver was not active and up-to-date.

  As expected, it was Found HP. supported drivers for my particular model and the version of windows on the HP website and found the latest driver for bluetooth device. I had the version dated May 2015, and my headphones worked great after that.

  In your case, you will have to hit Apple door my friend.

  The problem of its material for sure. Please contact the service exceptional customer called Apple.

  After that all Macs have never no problem, you paid the higher price for it. : Pei

• If someone else on the network as open thunderbird, nobody else can use it until the person origional closes their? Please tell us how to solve this problem.

  We use thunderbird on a network of several computers connected to an e-mail account. If someone else uses thunderbird as the sending and receiving of emails point on the other can use thunderbird at the same time until the first person close Thunderbird. How can we solve this problem?

  Do you know if your installation uses the IMAP protocol?

  Your problem may be due to the server; It can be configured to allow only a single connection at a time.

  Different users share a common profile? This would give the symptoms that you describe, since the Thunderbird locks his profile.

• HP Laserjet M1522 nf - cannot install the driver (print spooler is stopped)

  -installed driver using the installation disc, but when I tried to add the printer to the wireless network, all THE existing definitions of the printer disappeared and print spooler has stopped. I restart the spooler, but when I try to install the driver, the error message says "cannot install printer - Print Spooler App stopped. Please start the spooler or restart the computer. ") Operating system Vista).  I've upgraded to Windows 7, but the problem persists.

  So is the printer connected to the router or you are going through the router to a shared printer on another computer.

  Whatever it is, the printer driver must be executed in the process of printisolationhost rather than the spoolsv process if the spooler will not process that is corrupting the print driver.

  When you have Pro and Ultimate is easy.  If you have home made me know if gpedit.msc launches Group Policy Editor.

  For Pro and home run printmanagement.msc

  Drivers, find the 1522, right click, pilot of isolation, isolated

  Now, start the spooler service.  Since the driver does not work, you must remove it by using any HP software used to install the driver.  Normally in the programs, you can find the installation of HP and select uninstall.  Reset.  HP.com head, pick up the HP driver published last month and start again

  version 4.3

  4.3 March 23, 2010

  220,7

  March 23, 2010
  Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1