Design mode does not match the web page

Similar Questions

• Does not load the Web page.

  It will not load the web page. It gives an error message or to say that it has expired. The circle on the tab will turn to a stop bit while then just, and nothing comes up. I uninstalled, and re-installed and still gives me this problem. I checked the updates and I am running the latest version.

  I disabled my firewall on my Norton Internet Security and Firefox work again. I activated the firewall back and it still works, go figure.

• type in the navigation bar does not display the web page

  Type the URL in the navigation bar does not appear the page. But when you click on the same URL in bookmarks, page displays OK.

  Hi sidonius,.

  I'll try from Firefox Firefox to solve the issues in Safe Mode. If you do not have the issue so that all your modules, extensions, and themes are disabled, you can try adding them in one by one until you find the culprit. You should look at the guide to troubleshooting Extensions and themes and article troubleshooting issues with plugins like Flash or Java to solve common Firefox problems as well.

  Hope this helps!

• HP3050 J610a: jet 3050 Office does not print the web page

  I use windows7 on my HP desktop. I have updated to the new drivers for my printer/scanner HP3050 J610a about a month ago and since then have had some problems at random. Later, it is that it will not now print web pages in IE 11. I don't know when my browser updated itself, so I don't which excluded as long as possible problem. I am able to print from firefox.

  When I try to print from IE, the print dialog box does not open and the correct default printer is checked. I click on "Print" and the cursor changes to a fraction of a second, the window closes, but nothing seems to be sent to spool it print.

  Any suggestions?

  I went to the community of Explorer internet and found that I have to run IE as an adminstator. Worked fine then...

• Wireless is connected but internet explore does not display the Web page and redirects me here.

  My laptop has been connect wireless to my own private network and public networks such as McDonald's, Panerra, etc... Now, I get a message that says internet explore cannot display the Web page, but my computer says it is connected to the internet and my wireless connection is excellent.  I also tried to connect with Mozilla firefox with the same results.  The error from the Explorer head here to get answers, please help.

  Hello

  This line, Autoconfiguration IP address...: 169.254.82.78

  This means that the card can not be set with a valid IP address, and Windows assign a null default IP.

  Maybe this can help.

  My wireless is not working - http://www.ezlan.net/wireless.html

  Basic wireless configuration - http://www.ezlan.net/Wireless_Config.html

  Wireless Security - http://www.ezlan.net/Wireless_Security.html

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Browser does not display the web page

  Hey everybody,
  
  I have a problem with a web page that does not display right. What was my client has a new web page that is updated once a week. How I update it changes the content on Dreamweaver and copy the codes and sticking them on the interface of server and re-register the. Thus, in the course of riding the old news page.
  
  See all right on my computer. The only thing is I need to refresh my browser so that the right-hand page is displayed. Once he made, while it stays like that.
  The thing is my client still sees the old news page, even though I replaced with new codes.
  
  I did it for him for more than 3 months, and this has never taken place before.
  
  I don't understand why it is like that. If this is happening to him, wouldn't that happen to other people's computer as well. If this is the case, then it is bad news, cause nobody would always want to refresh their browser for the news page just show.
  
  Could someone explain to me why this is happening? And how it would affect other users? Or is it still possible.
  
  Thanks in advance, everyone.
  Jen

  This looks like a cache problem. When you view the page, this page is loaded in your (or your clients) the browser cache memory. This is done so that when you return to this page it will load faster (because it is already loaded into memory).

  This will happen only if a person has visited the page recently. There is a limit on the amount of information that your browser will store in the cache. The more you surf, it is likely that the page will be replaced in the memory cache with some other information.

  You (and your client) can, depending on what browser you are using, set your preferences so that all web pages will be completely recharged each time you visit. In IE 6 for Win: Tools > Internet Options > settings > select "every visit to the page". You can also set your cache to the minimum amount of available space. Note: This works really well in IE 6 to WIN. I use firefox for the review of the changes because I found that IE 6 is completely reliable to view later.

  Most of the other browsers will let you hold the SHIFT key and click "refresh" to throw the page cache and view later. AFAIK this is the operating mode standard for proofing of new pages.

  If there is a coding technique to force a browser to use only the latest information, I don't know what it is.

  Good luck.

• IE - 8 does not display the Web Page of hyperlinks with MS Office Publisher 2003

  I've created two different sites using MS-Office Publisher 2003, and they have published on the web.  They are: www.tsquarterhorses-indiana.com and www.thomassacres.com when read using the IE 7 browser fine.  All pages work and embedded hyperlinks are displayed.  I have a client who has recently upgraded to IE - 8.  When they started to get reports that the site did not work they called me.  I went on every site and checked with my IE 8 browser.  Of course, Web sites were there, but the hyperlinks and the meter did not work.  I did some research and found that IE - 8 is not compatible with Web sites created for older web browsers.  I read that you need turn on compatibility view.  I did and was able to bring the counter but not hyperlinks.  Should what program I use to create Web sites that will work 100%.

  Locate the Office Forums

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to Office and would be better suited to the office community. Please visit the link below to find a community that will provide the support you want.

  http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx

  Matt
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Final result does not match the Master Page

  I'm so frustrated with Muse right now I could scream. I'm creating a simple landing page, a single page, where what little information it is (a graphic background, logo and contact information) is the master. I want to just publish a page that is exactly like the master, but this does not seem possible with Muse. Why is this? What Miss me? If you open the master page and go where the text breaks for mobile display, there is a blue graph that I placed at the bottom to fill in the blanks. Has gone in the final result and the page is excessive in length, I can't change in any way. The master is set to vertical 956px, but the last page is at 1080. There is nothing hidden anywhere on the page or master.

  A zipped file of the site can be found here: Dropbox - AYIN Website.zip

  I would be very grateful for any help anyone could give me, thanks in advance.

  MP

  Hi David,

  Thanks a lot for your answer. However, after consideration and discussion with my client, I think I'll try to rebuild the page from scratch, since it's so simple, see how it works first. I'll get in touch if I'm still having the same problem.

  Kind regards

  MP

• Does not start the web page after completing the configuration

  I have a problem with vCD 5.5.2 running on my lab at home. I made sure that all the prerequisites are met. The cell has been initialized properly without one mistake and I'm still not able to launch web page, no idea why this happens?

  vCD is installed on CentOS 6.x

  I enclose cell.log

  I hope someone can share his thoughts with me.

  Thus, all the cell.log told me is that the service obtained running.

  vCloud-container - debug.log will tell me if there is an error after starting the services.

  If this is a new installation of the OS, the firewall blocks outgoing default HTTPS traffic.  can you try to disable just the firewall for a short time, restart vmware-vcd service, wait for the cell.log to show finished, and then try again?  The firewall is the most common question on the newly installed outside the research forward/reverse DNS is not configured for both HTTPS and ConsoleProxy Treaty.

• Installation of HP DJ 3050 a print margin does not match the word page layout

  When you print the Word 10 as the print margins are different the actual document, they can be changed? Currently, print preview displays the page number in the cut foot.

  I'm in word 2010 on windows 7

  Hello simfra1uk.

  Installation of bottom in the document margin cannot be less than 1.5 cm (or 0.57 inch). The footer margin must be also bigger than that so it can be printed.

  See you soon!

• URL address box does not display the current page.

  With the 4.0.1 update, the URL address box does not display the current page.

  All that shows is the text: «Go to web site»

  To now see the url of the current page, you need to make a right click the empty space is the address box and press the button "esc".

  Is there a way to display the url of the current page?

  This problem may be caused by an extension that is not working properly.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode
  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

• Possible error with module GWT.xml file. The value of time compilation agent user (ie6) does not match the value of user.agent (ie8) run time

  Hi there... How can I sort this problem as this message looks back constantly on google Account... ERROR POSSIBLE WITH GWT. The value of time compilation agent MODULE XML FILE user (ie6) does not match the value of user.agent (ie8) run time

  Hello nEve Adam,.

  Thanks for the return of the response.  Below, I've added some links Google support on this issue.  I hope this helps.

  ERROR: Problem Possible with your *. GWT.XML file module. The value of compile time user.agent (opera) does not match

  http://www.Google.com/support/forum/p/blogger/thread?TID=2d6d9bd1326a07c4&hl=en

  In addition,

  Message from Web page

  http://social.technet.Microsoft.com/forums/en-us/ieitprocurrentver/thread/53194559-306a-4ffc-a614-4bac817f178d

• After installation or upgrade to Firefox 31, starting Firefox does not display the home page, personalize displays a blank page and the radio button does not work

  I am the admin of Windows for a University Department and install PC with Firefox all the time. This problem does not occur with every PC I would maintain, only a selection bit (model different laptops with Windows and update 1 8.1.) Until today, it has happened with the new user (with admin rights) accounts that I place on laptops for our staff. Today, this happened with the account administrator while setting up a new laptop. In all cases so far, I have install Windows from a registered image that was created by using sysprep.

  I tried many suggestions to reset Firefox, removing the profile of Firefox users, removing the Windows profile users, uninstalling/reinstalling Firefox, uninstall/reinstall of Firefox and the latest Java, but nothing helped. After uninstalling, I run an application to delete the caches and temporary files and even remove manually the keys to register HKLM\SOFTWARE\Mozilla and HKCU\SOFTWARE\Mozilla. I restart and make sure that the installation folder is deleted after uninstalling.

  Results are the same: after installing Firefox 31, the initial settings for migration, IE or Chrome pop up and after having clicked on the button finish, Firefox starts but does not display the home page of the new user, only a blank page. By clicking on the Options (3 bars) button does nothing. Right click in the appropriate box, the shortcut menu appears, so I can choose to customize, but which opens another tab with subject: Customize the URL and the page is blank. In the right click context menu, I can activate the menu bar and get options from that.

  My last attempt helped a little. I uninstalled Firefox 31, cleaned, removed the profile user Firefox, rebooted and then installed Firefox 30. Initial start-up runs and tells me that I'm not up-to-date and the works of button Options. But I can't always customize.

  Then I upgraded to Firefox 31, but then it's back to no start page, no options button and no customization. I can go down to 30 and get customize practically works again.

  Addon only is for McAfee Scriptscan to Firefox 15.1.0, just after installation is disabled.

  Any help would be appreciated. Thank you.

  You can try a different theme of Windows?

  Have you tried to start the computer using Windows safe?

  Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) as a test.

  • http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/

• When I open a link in a new window does not display the web address.

  When I open a link in a new window does not display the web address. What have I done wrong? It used to work and it works if I open the link in a new tab, the problem is that I hate to use tabs prefer a new window every time... Help!

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Toshiba satellite running Vista. The file is possibly corrupted. The file header checksum does not match the checksum calculated

  Toshiba satellite running Vista. The file is possibly corrupted. The file header checksum does not match the checksum calculated. Tried all posisible boots and no joy, continues to turn it back on! Frustration...

  Hey James,.

  I does no change, I didn't download a document from my email (from a sender of confidence). I tried to start in safe mode, just, it restarts and goes back to the corrupted checksum display... Last known good config was the same result! The only error message is one that is in the title of this post, not others. Another detail, that I forgot to add is that it does not get insofar as a logo windows before it fails, just the toshiba start screen, then either passes the corrupt message checksum or a blue screen and restarts before I can read the text on the blue screen. Thanks for your response! Any additional help would be excellent if you can. In the meantime, I'll try your methods. Thanks again
  OK, I have now managed a Startup Repair trying over and over again. Restore all settings and now looks very good, thanks for your help!