I need to connect laptop to tv?

Similar Questions

• Need to connect MacPro to the router

  My Mac Pro is now connected to the internet via the airport card and the modem is down. But I need to connect a router on a mac so I can run my laserprinter through a network using a RJ45 cable. I can't run the cable in the area of the modem is located. Can I connect the router directly to Mac and use the card airport as the internet connection?

  Dbarunas,

  You left out some important details, but let me see if I can answer without them:

  Assuming that the ISP modem you mentioned is your current destination of wifi and Airport card is built-in wifi Mac Pro adapter.  I also guess your desktop not a laptop since you don't mention MacBookPro.

  1. If your router is wireless and assuming that the 'airport' is the the computer's built-in wifi card.

  (Wired connection) modem-> router (cable) * (wifi)-> laptop (wifi) (* printer cable) to connect to the router via wifi instead of the modem, then turning off the wifi on the once the router WiFi modem set up, if possible. (No need to nuke the family bits with too many signs wifi).

  2. If your router is not wireless.

  Modem-> laptop (wifi) * (wired)-> router (wired) (wired)-> printer (cable) (* make sure that the computer has not a gateway specified in the network settings for this connection assigned static address.)

  3. If your router is not wireless and no other host on the router. (without router required)

  Modem (wifi)-> laptop (wifi) (wired)-> * printer (cable) (static addresses the only, once again no gateway) (* this may require a crossover based on the capabilities of the printer Ethernet cable.)

  When you use a wired network on the laptop and wireless Internet access, make sure the "backend" network cable is on a completely different range of addresses and 'NO' gateway assigned or the laptop would not know how to get to the INET.

  Joe

• Satellite M45 - S169 PSM43U: need to connect to a serial & parallel

  Hello!

  I have an old model of Satellite and I need to connect to a machine that has the old fashioned entrences with pins (father and mother) and was told that I need a Replicator (series and parallel).

  Now, I am very confused because I'm not technical, so please advise me on two things: is there something that makes such thing? (usb to old pines mode) and if there is I really need to buy it (so please pusrchase details).

  I'm sorry I was so hard to describe what I need. I am an electronist and works with large machines so I need to connect my laptop to the machine; s software.

  Thank you

  Hmm. The notebooks of the era generation don t support the serial ports or parallel
  This is why you don't have many opportunities to connect older devices to a laptop that was not equipped with the parallel or serial port.

  As far as I know, there are some USB-to-serial or USB port adapters / parallel.

  Google a bit and I sure you can find some good offers m.
  But note; I read somewhere that not all cards work properly, you will need to study a little.

  Good luck

• Canon MG5650: Canon MG5650 printer/scanner that can I print using the wifi but HP spectrum says I need to connect to analyze

  I have a HP spectrum 13 and we operate a wireless LAN at home that includes the Canon MG5650 printer/scanner. The connection between the two devices works very well generally. I can still print without problem. Today, I am not able scan - the laptop says that I need to connect to the printer to be able to do, but I am well connected via wifi, I can print.

  I turned off the laptop and rebooted. I stop the printer and restarted. No action produces a change.

  The printer is conducting the analysis. If I perform the scan at the printer operation, the scan is successful and the printer sends the document scanned to the laptop of my wife - it's the primary printer that will recognize the cannon.

  This was not a problem never before.

  I would appreciate any advice on next steps to solve the problem.

  Thank you.

  Tony

  Eventaully problem solved by adding a new application on the Canon site on the desktop and removing the old app scan supplied with the laptop. It does not explain why the problem occurred in the first place but provides a "fix."

• You will need to connect the battery, but lapptop now sign showing that the battery is not connected, so does not load.

  You will need to connect the battery. until recently, all ok.  never use the laptop as a mobile, always on the wireless, but lapptop shows now sign that the battery is not connected so does not load.

  I have a laptop which, so far, is always connected wireless when it is in use. I want to take a vacation, and notice a signal arrives that the battery is not connected and therefore does not load.  This has happened recently, although the battery never showed a 100% charge. can someone tell me how to connect the battery please.

  Check that the battery is correctly installed. If it is then the problem is that the battery is exhausted, so you should buy a new battery.

• My WMP said that I need to connect a burner and restart the player?

  For long time now Ive been burning cd and just recently my WMP started getting a message saying I needed to connect a burner, and then restart the player. It goes the same for extraction, he said "A CD DRIVE IS NEEDED in order to RUN RIP". I don't know why he started to do this, he has never been a problem before. I have a laptop HP Pavilion with Vista Home Premium. Is there anything I can do to restore or solve my dilemma? Advice or answers would be useful.

  Thank you
  Mike

  Hello

  Step 1: Please make all underneath the same if you've done it before as it's often the total of the process which
  solves the problem. Start at the top and use it as a checklist to the drive works and not jump around like a menu.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  If necessary:

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
  that the troubleshooter does not, and those who "could" be the cause.

  Check with your system manufacturer Maker and device for possible firmware updates and the good
  Your player registry entries.

  Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
  other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even registry settings correct for your CD/DVD drive
  a person with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Why do I need to connect to IEEE xplore?

  I use a computer at my University. Sometimes I need to search for articles in IEEE Xplore http://ieeexplore.ieee.org/Xplore/home.jsp

  Actually, since there is a computer in my University, I don't need no connection IEEE Xplore to get the document I want. When I use other browsers like IE, it automatically connect to an account (this is perhaps because of the IP address.). But whenever I open IEEE Xplore in firefox. It is said: «Institutional Sign In» Some say it is because firefox uses a proxy? I don't know. How to solve this problem?

  Hi qiaot,
  You may need to ask the administrator of these computers from the University if they have a mozilla.cfg file or preferences locked in the Firefox profile first.

  The parameter that controls how Firefox connects to the internet is as follows:

  1. Click the Menu of Firefox
  2. Click Preferences/Options
  3. A settings tab open, click the magic hat or the "Advanced" tab and at the top, click on 'network '.
  4. Click on the 'Settings' button and take a look at the second screen shot. If this second screenshot has no information on a proxy this could the question and you would uncheck "do not ask for authentication if the password is saved" (assuming that you have Firefox save your passwords: Password Manager - don't forget, delete, modify and import passwords saved in Firefox )

  Don't forget, if you connect to this computer with a name of ads may save the password for the profile account, however if it's a public computer, others will have access to the password if you save it to the Treasury. I hope this helps.

• Is why each dictionary app needs internet connection?

  After downloading several applications dictionary, I found that they all need internet connection to work.

  There are no applications that are available to be used offline. As a side note, by downloading and installing via Marketplace, an application can be labeled "work offline", wherein if an application doesn't have this label, the app is not available to work in offline mode.

• Help! I need to connect my iPhone5s to the stereo, but it has only one usb port and whenever I connect it, it connects? Is there a setting on my phone, I need to change? Help, please

  Help! I NEED to connect my iPhone5s to the stereo, but it has only one usb port and whenever I connect it, it connects? Is there a setting I need to change on my phone? Help, please

  You will need something like that and a micro USB to USB cable

  http://www.Apple.com/shop/product/MD820AM/A/lightning-to-micro-USB-adapter

• Qosmio G20-139: What cable I need to connect a 5.1 system speakers?

  Hi all

  Does anyone know which cable or connector, I need to connect my Qosmio g20-139 to a 5.1 system speakers?

  I searched the forum and it seems that someone has used a "optical cable Toslink" - check link below:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=3665

  Anyone successful with this? Can someone please give me a link to a place I can buy something that works? (I put 'Toslink optical cable' in google and it gives like 1 million different things!)

  Thanks for your help.

  Chris

  Hello Chris

  I found a useful site on the required cables.

  Check out this link.
  http://www.mycableshop.com/2nd_Cat/Toslink.htm

  You wondering where you can buy these cables. I put t know you came but I m sure that every good PC or reseller of audio accessories can sell you these cables.

• what I need to connect my macbook to my iMac, so I can use the larger screen

  what I need to connect my macbook to my iMac, so I can use the keyboard and the bigger screen

  What MacBook and iMac what do you have?

  Use your iMac as a display with the target - Apple Support Display Mode

• Need replacement battery: laptop Vaio: model number: VGN-CS190

  Need replacement battery: laptop Vaio: model number: VGN-CS190

  Give me links on where I can buy it.

  I got mine from TigerDirect.com; costs about $30 I think.

• My internet connection laptop keeps dropping out. This utility solves temporarily, saying the default gateway of something is not available.

  My internet connection laptop keeps dropping out. This utility solves temporarily, saying the default gateway of something is not available. How can I permanently?

  Hello

  1. who is the operating system installed on your computer?

  2. are you using a cable or a wireless Internet connection?

  3. were there any changes or updates made on the computer?

  4. what store did you try?

  Follow the steps mentioned below and check.

  Method 1: I suggest you to return the item and check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  You can try resetting WINSOCK, TCP/IP IPv4 and IPv6 TCP/IP stack.

  a. Click Start and in the search box, type cmd.

  b. right click on command prompt, select "Run as Administrator" to open a command prompt.

  c. at the command prompt, type the following commands:

  netsh winsock reset catalog, which resets the WINSOCK entries to the default installation

  netsh int ipv4 reset reset.log that resets the stack TCP/IP IPv4 default installation

  netsh int ipv6 reset reset.log resets the IPv6 TCP/IP stack by default installation

  d. restart the computer.

  Method 3:

  Reset the default router by pressing the reset for 15 seconds with power button.

  a. turn off the modem, the router and the computer.

  b. connect the modem to the WAN/Internet port on the router.

  c. connect the computer to one of the router's LAN/network ports.

  d. turn on the modem, wait for triggering connect light.

  e. turn on the router, wait two minutes.

  f. start the computer.

  g. when the computer is completely loaded, check if the problem persists.

• I have a galaxy phone and I need to connect it to swap but can't install the certificate on the phone. How can I do this?

  How to install the certificate on android phone

  I have a galaxy phone and I need to connect to exchange but cannot install the certificate on the phone

  Hello

  I suggest you to contact the Galaxy phone holder and check.

  http://www.Samsung.com/us/mobile/cell-phones

• my printer did not come with all the cables needed to connect to my computer

  I just got a PIXMA ip2820 and he came with all the cables needed to connect to my pc or is it wireliss and if so how I managed to connect wireless

  Hello.

  Our printers do not come with USB cables.  If you do not have a cable connected to a previous printer, you can buy any B USB standard cable locally has to establish the connection.  It is a pretty common cable located at most major retailers office supply or electronics.

  The iP2820 can only be used with a USB connection.  It doesn't have wireless capabilities.

  It has not responded to your question or problem? Find more help contact us.