Need to connect MacPro to the router

Similar Questions

• Router WRT54G3G-ST - no internet connection - cannot reset the router

  Hello.  Some longer story certainly not short (I apologize for the length of hiking...  I don't know what is and isn't important, will scan, please...  I'm sorry...) : recently my computer (Dell XPS 400, Windows XP Service Pack 3, Internet Explorer 7 with phishing filter and pop-up blocker on, SiteAdvisor, up-to-date McAfee Anti-virus and Firewall and a router Wireless-G Linksys WRT54G3G-ST with its AC adapter plugged into the wall power outlet and a network cable directly connected to my computer.) received a drive-by generic.DX!12536d125737 Trojan horse without me download whatever it is one of the few sites I visit every day.  My internet connection has crawled, and I have now no connection at all.

  I've been making McAfee good volunteers forums help quick and very helpful...  They recommended Malwarebytes Anti-Malware for me, I downloaded my own second computer (a laptop) on my flash drive, then on my infected computer.  I ran, tried adapting so recommended, and only then discovered the Trojan horse killed my broadband entirely.  I scanned with it anyway and he quickly found and deleted / quarantine 11 Adware.MyWebSearch related files, but nothing else.  Then, they gave me a link to a patch off updater file and tells me scan in SafeMode until nothing else has been found and check if it has fixed my lack of broadband access.  I did, Malwarebytes found nothing else, but unfortunately I still had no broadband.

  Then, they recommended WinsockXPFix.  Which I ran and he did all his OK registry changes, I restarted if necessary but still no broadband unfortunately.  WinsockXPFix using make things worse for me with the registry changes, did he?  I used the backup of the registry to save the registry before changed files before running.  Should I come back since I don't always have a broadband connection?  McAfee volunteers kindly then told me that I had to hard reset the router, but I tried many times with no fortune.  I'm at a loss as to what, if anything, do we hope to get my broadband, please...

  It is very confusing with many different variants for resetting routers, and what should I do to my router model (Variations: unplug this cable/adapter exactly where; pressed the reset button between 5 and 30 seconds, the computer restarts, or no, 1 or 2 minutes between different steps, waiting or not - and for all these exactly when in the restart procedure.).

  I have reset once before with the reset button, page of routers to http://192.168.1.1default admin password, then it changed to security, etc. but this time I can't make it work.  I'm happy as possible to try once again to get an appointment by perhaps, something please...  When I go to http://192.168.1.1 now, or to any other address, Internet Explorer gripes at me that I am offline, which is annoyingly correct.  I do not have and never had Zone Alarm, but disable my McAfee Firewall does not help.  IPCONFIG at the command prompt gives me an address of 169.254.X.X assigned Windows

  I was going to use the routers Wizard installation CD to try to reset the router, and if that didn't try to get its firmware version number to perhaps upgrade.  But I was going to ask here first of all for expert advice because I read a lot of things that can go wrong during the upgrade of the firmware.  However, analysis the CD (without launching the CD). McAfee found the virus W32/HLLP. Philis.ini in the file "D:\_desktop.ini" on the CD.  McAfee didn't delete the file, I don't know why.
  I scanned my computer together several times and no infections have been reported.  I downloaded the file several times, both www.virustotal.com (39 online antivirus) and virusscan.jotti.org (20 online virus scanners) and every time each virus scanner didn't report any possible infection.  My updated virus scanner McAfee reported a false positive and still Jotti and VirusTotal 2 scanners from McAfee report the file as own probable?  Is "_desktop.ini" a file legitimate Linksys?  I have not found any information on Linksys forums about this.  My problems just keep multiplying... mentioning problems more...

  Find this suspicious file on the CD I decided to download instead the Linksys Setup Wizard
  (Router product page: http://www.linksysbycisco.com/US/en/support/WRT54G3G-ST/download )
  File: http://downloads.linksysbycisco.com/downloads/WRT54G3G-ST_SetupWizard_4_2_06042008.zip)
  my flash drive, then on my infected computer that is connected to the router.  I ran it (downloaded the version of the file: 4.2.0.007 - original version CD Setup Wizard: 4.0 print on CD front) and immediately gave it 1 of the 3 options: Mobile broad band only, high flow only WAN, or WAN high throughput and high speed Mobile.  I don't know what damage, if any, I caused by continuing.
  It seemed that he was trying to go in the entire router configuration process.  I thought it would take me to some options to reset the router, as I read in the user's Guide, and besides - it is my understanding.  The installation process stopped at only 30% done "router not found, make sure that the router is connected correctly and try again."  How many Overwrite original router configuration files I did continue?  I'm quite confused.  The wizard does not check if the router has previously been set up before setting up again?  Unlike version caused my router to not be detected by the Setup Wizard?  Is the horse of Troy generic.DX!12536d125737 who killed my trash to wide band my computer settings so badly that my router is undetectable/essentially not configured?

  Update of sorts: I tried one last time to reset the router, and I unplugged/plugged the network cable.  The fact that I had still no broadband on my Dell XPS main use computer that is connected to the Linksys router.  However, my laptop, with map data in the router, was for the first time able to find network - constant connection and speed is great, it's what she allways has been on the laptop (the Trojan/router problems, my laptop only for broadband with the data in the laptop card.).  Perhaps the cable network was simply not re-connected properly/entirely for 1 of the many attempts of resetting, indeed, it could also explain the downloading, installation wizard is not able to find the router/only get 30% done.

  Laptop prompt IPCONFIG/all with data card Sprint inserted into the slot of your laptop:
  IP = 174.158.XX.XXX (Sprint)
  Subnet mask = 255.255.255.255
  68.28.90.91 = DNS servers
  68.28.82.91

  Laptop prompt IPCONFIG/all with Sprint data card inserted in the router:
  192.168.1.1XX = IP address
  Subnet mask = 255.255.255.0
  Default gateway = 192.168.1.1
  = 192.168.1.1 DHCP server
  Servers DNS = 192.168.1.1

  Since my laptop started to work with the data card into the router, I have not tried again to reset the router and I tried the downloaded installation wizard.  I don't want to spoil anything about it any further as I have (?) / the Trojan has, and I need expert advice, please, about which of the 2 if not more, I do (first?).  On my laptop, typing http://192.168.1.1 in Internet Explorer Gets the ToolTip for the user name and password, but I did not.  I read that you should not reset the router or (?) Is it just 1 or two please?) upgrade the firmware unless the computer is connected directly to the router - that is not my laptop.  On my other computer that still has no broadband, Internet Explorer still says I am offline when you type http://192.168.1.1 in.  My IP address on it is still a 169.254.X.X assigned Windows and a command PING 192.168.1.1 prompt returns with 'Destination host unreachable.', as it has been always and even with all the other addresses (with the exception of 169.254.X.X).

  Boring 2nd "update" of all kinds, my apologies for the length, as always: I've been so focused on the horse of Trojan/broadband killing that cluelessly largely forgot I switched with AOL.  Try AOL dial-up does not work, madness thickens...  Software AOL tells me to check my connection, but all the phone cords are connected as should be.  I plugged a phone directly into the wall jack and I get the tone, I can call OK and the phone rings and receives calls OK.  State of the devices-Modems-Properties-Device Manager says that the modem is not working properly, and "resources" tab shows no conflicts.  Query Modem on the diagnosis tab seems OK to me, as does the journal, but I'm certainly not an expert like allways.  I change all the settings from anywhere.
  I noticed and that check IPCONFIG it says that my IP address is 192.168.1.100 it lasts maybe that someday (then goes back to 169.254.X.X), maybe more, I don't know - I don't check that often to define (should I?).  Meanwhile my broadband, or my works switched.  I can PING 192.168.1.100, but nothing else.  I am convinced the wrong killed Trojan horse my broadband and dial-up - I've never had a problem with my prior V.9x DFVc Modem 56 K Conexant D850.  In addition, I am not convinced the Trojan horse is not still lurk everywhere on my computer, I think that it's...

  Any help with the restoration of my high speed/dial-up is greatly appreciated, please...  Thank you!

  Hello.  There has been entirely too long since I answered, I'm sorry.  There is no excuse, and it is terribly rude to me...  You took the time to read and answer me, and I appreciate very much that in effect.  I apologize for being late, I'm sorry...

  After that I left my message, I downloaded several virus/spyware scanners, etc from my laptop on my USB key, then my other computer for some in-depth analysis necessary.  Was one I downloaded Network Magic that somehow, some way fixed both my high speed/dial-up internet on my main computer is connected to the router WRT54G3G-ST.  I don't know what/how he fixed my connection, but the connection high speed flow works brilliantly since...  Network Magic has worked for me, and I highly recommend it to all those who have stubborn lack of internet problems (caused by Trojans to this) that I did.  There is no guarantee this will work, but it did for me in my amazement.

  Network Magic, as is the Linksys is owned by the parent company Cisco.  Respectfully to all the knowledgeable experts here (which clearly I'm not), I don't want to venture out of the limits.  I'm trying to simply hope to be useful and save a few headaches for both you volunteers and users... buy a new router or the computer was in my mind, with all due respect, I recommend suggesting to try Network Magic users if the reset of the router/all other fails, please.  I used WinsockXPFix/WinsockFix utility before using Network Magic, I don't know if it matters.

  I also upgraded my package of McAfee, I installed on my old software rather than uninstall the first, which caused errors in all things virus scanner a critical need.  I install right now, but it caused some delay to refocus my time.  Some virus scans found many Trojan horses, some were same / in the same folders that killed my broadband - which stopped me in my tracks to ensure a clean uninfected.

  Certainly, it doesn't fully explain the long time, and I'm sorry, once again.  It's just that I'm being cautious and slow in all this.  To answer the first very good idea, you did: Unfortunately, there is no room on my other computer to connect the router in to, which even so caused frustration (at the time).  I forgot to include this in my post new length of countless things to see / do not forget...  It was a brilliant idea, however, I thank you...

  Thank you for your time and your help, I appreciate it sincerely...  Thank you...  I think and hope that this matter is resolved.  It seems to be, the router works perfectly as it always has, and I am positively happy as can be in this regard.  Thank you...  Peace...

• HP Officejet 7310 all-in-One: printer does not print when connect you to the router

  I can't print from a Mac book pro wireless connected to dsl ATT modem/router.  My printer, HP Officejet 7310 is connected to the router with an ethernet cable.  I can print a test page from the laptop and see my supply rate.  When I try to print an e-mail or my word processing, I get my printer icon on the desktop that said it printer, no error message, but printing does nothing.

  I use the latest driver from apple, 2.0.4 and I have installed and uninstalled the printer numerous times and I

  Download the software twice.

  The HP network configuration page shows the same IP address of the printer, as does the router.

  The printer works fine if connected to the laptop.  If I connect the printer to my mac mini, which is also connected to the

  router by an ethernet cable, I can print from the laptop.  What is going on?

  Hi @TimL2,

  Welcome to the HP Forums!

  I noticed that you can not print with your HP Officejet 7310 when connected to your router. I'm happy to help with this problem!

  Please, try the procedure described in this guide, "printer offline" or "printer not responding" Message (OS X)and let me know what happens!

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  I hope this guide is useful!

• CONNECTION PROBLEMS WITH THE ROUTER (NETGEAR) - no problem with the provider of speed as it has been checked__

  • Programs you have problems with - very slow connection with all pages
  • Error messages - on the profile of my son is unable to connect at all with the error message
  • Recent changes made to your computer - windows 7 but added meeting the problem before this
  • What you have already tried the problem - claimant contacted no problem with their connection

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hello

  Reinstall the NIC drivers
  Reset the router and check.

• connection for printing from a computer wireless with a connection cable to the router usb printer?

  Produst name: HP Officejet Pro L7555.

  Works with Windows 7.

  A new router and the modem was installed when Comcast installed our wireless connection.  This of course did not work with the current setting of the printer.  The printer is connected via USB cable to the router.

  Are you sure it's a USB and not an Ethernet cable?  I bet it's in the affirmative:

  1. disconnect the Ethernet cable.

  2. on the printer: Setup > network > default settings.

  3 reconnect the Ethernet.

  Now, remove the printer in Control Panel > devices & printers, then add it again like this:

  1. make sure the printer is on and connected to your network. Verify that you can access the printer's internal web page by accessing its IP address before continuing. Get his IP address for a network Test printed on the front of the printer.
  2. click on > start > Control Panel > devices & Printers.
  3. click on add a printer
  4. Select local printer
  5. Select create a new port and select Standard TCP/IP Port, and click Next.
  6. under device type, select TCP/IP Device. Under the name of host or IP address, enter the IP address of the printer. Click Next.
  7. Select Hewlett-Packard in the list of manufacturers and select and select your printer model. Click Next.
  If your printer model is not in the list, then select disk provided, browse the CD that came with your HP printer and select the first file begins with hp and ending with INF. click Open, then OK. Select your printer model. Click Next.
  8. If prompted, use the driver that is currently installed.
  9. He will ask the name of the printer - enter a new name or use the one existing. This will be the name of the printer that you select from other applications.
  10. we may ask you to share the printer. Choose No.
  11. the printing area of Test Page is displayed. Go ahead and print it out.
  12. click on finish.

• Do you need internet connection to use the software (photoshop, illustrator, insedign)?

  Sometimes I work a lot in Africa, at sea. So I don't always have a connection. I have a monthly prescription. Problem is that if I don't have connection (Internet) and I opened the software. I get the question to permit the trial. License is not possible (Internet needs) and the lawsuit says it's expired.

  How to solve this?

  Hello

  Please see Internet connectivity, currently out-of-time and reminders | Adobe Creative Cloud apps

  Hope that helps!

  Kind regards

  Sheena

• 3052 wont connect wireless to the router a

  I have a 3052 a printer that does not connect to my home wireless network, since I had to replace my old modem gateway 2 wire with a 4111N pace. I was able to connect to everything that was related to the top front (netbooks, smartphones, etc.), but the printer will not cooperate. If I change the wireless through the gateway and use WEP instead of the default WPA / WPA2, then connect. When you use the HP wireless utility, I get the message 'MAC filtering', but the Mac filtering is not enabled. Have spent a ton of time on the phone with HP and AT & T support, but so far have not been able to find a solution. Most of my pc using Windows XP. Any help or suggestions are greatly appreciated!

  It worked! First I tried to change the channel auto wireless against 11, with the same result. Then, switched to just wpa2 wpa/wpa2 security and he was then able to connect. Thank you very much!

• need to connect and configure the oracle on windows 7 vmware professional database? Help, please?

  Hello

  In fact, I wanted to set up ORACLE with Informatica Power Center (ETL) database connection. But my problem is that I installed the oracle database with grid inside VMWARE with the RHEL operating system. But what INFORMATICA etl software is installed outside VMWARE, which is located in WINDOWS 7 Professional.

  I would like to know how I can access and configure oracle database of windows 7 Professional as oracle database is installed inside VMWARE RHEL 6.5 operating system.

  Help, please.

  HERE'S HOW I SOLVED IT: -.

  
  Here is the url for the NAT that could become useful for other institutions.

  How to Setup Port Forwarding in VMware Workstation 9 | Virten.NET

• Connects to the router, but cannot send or receive data

  I have a WRT54G.  I can find the network and connect to the router, but I can't send or receive data.  I tried to connect directly to the router and I still not able to send or receive data. Both computers on the router has the same problem.  I did a reset the router back to the settings by default and still no luck.  Any thoughts?  Thanks in advance for the help.

  The first thing you can try is when you the Modem and the router is connected to the other, disconnect the power from the router and Modem, wait 30 seconds and then plug in the power to the Modem and once all the lights are solid, then connect the power supply to the Linksys router, now check if you are able to go online. If still no then...

  Who is your ISP. So I think you need to re - configure all settings of your router again.

  If your Internet Service is cable follow this link

  If your Internet Service is DSL follow this link

• Windows 7 Dell computer laptop connects to the router, but the internet connection is spotty/slow

  I recently installed a new Comcast wireless gateway, which includes a built-in router.  My Ipod and Ipad work perfectly with this new router connection.  My Dell laptop, however, connects to the router without a problem, but it surfing the internet very slowly and sometimes can't access it at all.  The router connection remains strong during these periods of power failure, however.  I don't get online no problem when I connect directly to the router/modem with an Ethernet cable.  Network troubleshooting does not detect a problem, I have released/updated my IP address, and made sure I had updated drivers.  The issue still [persists.  Any input on what to try next?

  Hello Scot,

  Thanks for posting your question in the Microsoft Community forums.

  The description of the problem, I see that the Internet connection is very slow on the computer.

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

  Maybe there's a chance that some network settings, start services application or a third party or a security software restricted it to connect properly and is responsible for the internet connection is slow.

  I suggest you to follow the steps below and see if it helps.

  Method 1

  I suggest you try the procedure described in the following Microsoft Article and check if it helps.

  Internet Explorer is slow? 5 things to try
  http://Windows.Microsoft.com/en-us/Windows/help/Internet-Explorer/slow-five-tips-to-boost-performance

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Method 2

  If the problem persists, I suggest you to follow the steps described in the following Microsoft tutorial and see if it helps.

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Why is my Internet connection so slow?

  http://Windows.Microsoft.com/en-us/Windows/why-Internet-connection-slow#why-Internet-connection-slow=Windows-7

  Method 3

  If after performing more high question method persist, try to perform the clean boot and temporarily disable security software and then check the speed of the Internet.

  Step 1: Perform the clean boot

  Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135/en-us

  Note: See "How to reset the computer to start normally after a boot minimum troubleshooting" to reset the computer to start as usual after a repair.

  Step 2: Temporarily disable security software.

  Disable the antivirus 

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attack.

  Method 4

  Since then, the issue is not resolved by disabling the security software, Windows Firewall could be the next possibility. So, I suggest, temporarily, disable the Windows Firewall and check if the problem persists.

  Refer to the following steps:

  1. Press the Windows key + R, type firewall.cpl , and press ENTER.
  2. Click turn Windows Firewall on or off. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. Click turn off (not recommended) Windows Firewall under each network location that you want to stop trying to protect, and then click OK.

  Caution:

  You should not turn off Windows Firewall unless you have another firewall is enabled. Turning off Windows Firewall may make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers. You must reactivate as soon as you have completed troubleshooting.

  For more details, you can see the article mentioned below.

  Enable or disable Windows Firewall

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• East-redirection of possible connection when the routing service is disabled?

  Possible when connection redirection is the routing service is disabled in win7? I find that this is the case on the following resource monitor. It comes to my ISP. They can redirect my connection like that?

  Hello Newman,

  Thank you for your response.

  I would like to inform you that if any Internet Service provider changes of place, it's legal and it does not affect Internet connectivity.

  Please let us know if you need more help.

  Thank you

• Want 5660: Printer cannot connect to the router

  All of a sudden the printer can no longer connect wireless to the router. Printer router ok may be defective

  Please provide the following information if anyone can help including:

  The printer model - done

  Operating system of the computer-

  Detailed - description of problem including all devices network (extensor, switches)

  Connection method - Direct wireless, wireless, wired LAN, USB? -

  Number of brand and model of router and modem? -

  Error messages - on the screen of the printer or computer, no matter what flashing light patterns? –

  The printer is connected directly to the wall outlet?  If this isn't the case, please explain how the power is connected.

  Do you think the printer is going to sleep and can't wake up? -

  If wireless, in the event of problem, what is the status of the blue wireless light on the printer, active, disabled or flashing? –

  Power off the printer and the router.  Power on the router and wait 3 minutes, power on the printer.  It connects to the router now?  What is the IP address of printers?

• Cannot connect to the router efax. On HP Officejet 650010n, Windows XP desktop, routher: tp-link

  I tried to connect the router to home port to efax.  Having hard time understanding connection.  Don't know which network in the list I'm suppose to connect to match the router password.

  The network you should be interested will generally be the first listed item.  By following the previous steps, you can check this on your computer.

  As Super-Dave pointed out, however, this printer has a built-in for eFax support.

  To use eFax with this printer, you synchronize your eFax account with your email and print faxes that you receive as attachments to email like you would for any other file.

• Game WGA600N adapter used to connect to the router WRT310N but not now.

  I have a game WGA600N adapter that connected perfectly to a WRT310N router. Has worked for 2 months. Then one night while being connected via the adapter for games, connection has been lost. I was unable to reconnect since. I have reset the router and adapter of game (full reset) and still not connecting. I thought that it could be the signal, but I put the adapter for games about 3 to 4 feet of the router and it still not connect. In addition, when you browse the installer on the adapter for games I can see my network SSID only one part of the time. In this case the weather in normal or next to the router as location mentioned above. Whenever I go through installation and network appears, I continue through the process, but I get an "unable to connect" alternation and the message "network found" that opens. By clicking 'next' never connects to the network. As stated, it worked fine for 2 months before this problem. I thought it was the router and replaced it with the same type and not luck. I must also stress that I was able to connect to an old WRT54GS router without problem. I also tried to connect wireless to the router WRT310N with another PC and had no luck in the connection... However he also finds and connects to the WRT54GS router without a hitch. I am lost at this point.

  As you have arelady set up your WAG600N with WRT54GS router and it worked perfectly well. Then I think the problem lies on WRT310N router. Maybe your game adapter and computers are not connect to your wireless network. You must change some settings in your wireless router. Follow this steps on your router and I think this will make your adapter games work perfectly well.

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER... Let the empty user name & password use admin lowercase...

  For wireless settings, follow these steps: -.
  Click on the Wireless tab
  -Here, select manual configuration... Wireless network mode must be mixed...
  -Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...

  -Fix the Radio band to wide - 40 MHz and change the broad Channel 9 and channel Standard 11 - 2, 462 GHz... Wireless SSID broadcast should be enabled, and then click on save settings...
  Please take note of the name of the wireless network (SSID) because it's the network identifier...
  For wireless security: -.
  Click the sub-tab under wireless > Wireless Security...
  Change the mode of WPA wireless security, encryption, select AES... Password input your desired WPA key. For example, MySecretKey, this will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone.

  NOTE: The password must be more than 8 characters...

  Click the settings advanced wireless
  Change the interval of tag to 75 > change the Fragmentation threshold to 2304 change the RTS threshold to 2307 > click 'save settings '...
  Now let's see if you can locate your wireless network and try to connect...

• Unable to connect when you use the router

  OK Ive been using my router for some time and it has always worked a few weeks ago, she decided to stop working, when im connect directly from computer to Internet modem is very good, so my cables and modem and all that is fine. When I connect everything through the router... Router, computer modem to the router, all the lights are show as normally its work, on the router and modem, the network on the computer thing Local didn't tell only / limited connectivity, rocking it back... but usually connectivity IPv4 said Limited instead of Internet

  Things I've tried:

  Unplug everything, turn it off wait 30 seconds... to deceive, dosent work

  Buy new cables just in case... it dosent work

  use LELA 1.6 to try and re-setup/installation/configuration of the router... says I don't have an internet connection

  updated LELA 3.0 or 3.2 I forgot what was it, and it does nothing

  tried to disable the network to try to turn it back on to see if it would help what whatsoever, and it the connection decides to disappear out of my zone connections network completely and then I don't have any internet at all the

  Usually I can solve a problem me when something goes whack with my net, but im lost and im hoping someone out there can help with my problem

  Reset the router...
  1. hold the reset for 30 seconds button.
  2. then disconnect the Dungeon can now hold the reset button for
  another 30 seconds.
  3. plug back in the power and keep the reset button pressed
  for 30 seconds.
  4. release the reset button.

  Then click here to re - configure your router...