I need to run a virtual machine, hyper v on my windows machine 8 with workstation 10

Similar Questions

• All of a sudden can only run a virtual machine on a workstation to 12G, used to be able to run at least three

  After years of use of my computer, I have a problem suddenly as the likes of which I've never seen elsewhere.  On a machine that was able to run three virtual computers, I now get error messages when I try to run more than one.

  The message I get is displayed as an attachment.  It indicates only 1192 MB is available for the second virtual machine, I try to run.  See error message when you try to run a second virtual machine.png

  The preferences that I set myself for VMWare Workstation show until 9210 MB should be available for virtual machines.  See the preferences.png workstation.

  Who is running when I try to launch a second is set to use 2 GB.  See machine running virtual preferences.png

  Resource monitor shows also that it should be 5376 available MB.

  I'm puzzled.  What could happen?  How can I solve this?

  I am running 8.0.1 build-528992.

  find your config.ini file
  Win7: C:\ProgramData\VMware\VMware Workstation\config.ini
  XP and 2003: C:\Documents and Settings\All Users\Application Data\VMware\VMware Workstation\config.ini

  and change or add these 2 lines
  prefvmx.useRecommendedLockedMemSize = "FALSE".
  prefvmx.minVmMemPct = '0 '.

  These settings should allow you to assign 12 GB of RAM or more for your virtual machines
  If this is not the case - I would switch to 7.1.4

• I can run all the virtual machines (created with workstation) in VMWare player?

  Suppose I created a virtual machine in a Vmware Workstation 7.1 installation.

  Can I take all of this a virtual machine and run it on a VMware player installation?

  Or Vmware Workstation offers specific features that are required by the virtual machine to run successfully?

  Matt

  If,

  If you are using vmware player 3.x, you should have no problem.

  Do not forget that the workstation and vmware player share much of its architecture.

  Best wishes / Saludos.
  Pablo

  Please consider awarding

  all useful or correct answer. Thank you!! -

  Por favor considered premiar

  any respuesta correcta o util. ¡¡MUCHAS gracias!

  Virtually noob blog

• move a virtual machine created with workstation 6.0 to vmserver2

  Is this possible.  And if that's the case, what would be the appropriate method?

  VMware Converter will do what you are trying to achieve.

• How can I transfer a file from the operating system to a backup of the production running VM virtual machine?

  Problem:  After I do a backup one using ghettoVCB on a local VMFS volume, I have a virtual machine that I can start something happened to that running.  However, sometimes I just need a file from the OS level, which means that I would need to start to get them, but then I have an IP address conflict.  I can't imagine a way to have the NICs turned off and still be able to move the file.  If I change the IP addresses, the software that I need to create the file that I need to transfer no longer works because, although there no need of constant connectivity to the seller, it is locked to the public IP address.

  Material:  I have two 4 ESXi hosts to work, each with local VMFS volumes.  They share a private vlan common and a vlan common public.  They each ssh, ftp, wput, wget, and rsync available.  I have a Windows 2003 Server VM which also hosts a NFS and the VI client and other VMWare tools.  It also has private and public interfaces as do virtual machines that would be to make and receive the OS files.

  Question:  How can I transfer a file from the operating system to a backup of the production running VM virtual machine?

  Thank you!

  Yes Mr President, make sure you set the network on this virtual machine to be connected to the 'Internal' vswitch, you set up before turning the power on to the virtual machine.

  -

• Definition of reserves on the running JAVA Virtual machines

  I recently came across an overview of VMware performance that had a page essentially recommending reservations memory setting for the running Java virtual machines (see table). We have Java environments and did not have performance problems or complaints so, I doubt that I would implement any changes. However, I am curious to know if it's even a better practical recommendation, I could not put the date on the document so I wanted to see if someone had updated or current information for vSphere 4.X, 5.X environments.

  In General, we only use reservations memory to avoid the overhead administrative and operational increased. If we have never not a necessity, I prefer to use reservations to pool resources rather than granular level VM reservations.

  In my opinion, if you use the reservations are a regularity no exception in your environment, then you can use these rules.  That said, if you don't have no problem, I wouldn't change anything.  I've also linked a new document below.

  http://www.VMware.com/files/PDF/Techpaper/Enterprise-Java-applications-on-VMware-best-practices-guide.PDF

• Run a virtual machine or vAppliance on a VMPlayer installed on a virtual machine

  Hello

  I had to install VMPlayer 2.5.2 build-156735 on a virtual machine in the Back/restore solution. I was initially not able to install theVMplayer on a virtual machine, but I got the time this as a result of article

  http://communities.VMware.com/thread/61041

  Now, after the successful installation, I'm not able to run a virtual machine on this VMPlayer, I get an error message

  "You can't power on a virtual machine with in a virtual machine.

  I tried to run a test applainc called My NMAP.

  I will attach the vmware.log file and the vmx file.

  I don't know there must be something in the vmx file to work around this problem.

  VM host is a Windows 2003 VM with sufficient resources.

  Any ideas how to get around this problem?

  Ah.

  ESX 3.0. * does not support monitor_control.restrict_backdoor.

  ESX 3.5. * does not support monitor_control.vt32.

  ESX 4.0. * takes in charge monitor_control.restrict_backdoor, but instead of monitor_control.vt32, you must use "monitor.virtual_exec = material."

  On ESX 3.*, you should still be able to execute the nested virtual machine by adding the following configuration option to the configuration file for the internal VM:

  vmx.allowNested = TRUE
  

• How to activate the Internet connection on Windows Server 2003 is installed in the virtual machine in VMware Workstation 8?

  I have Windows Server 2003 is installed on a virtual machine in VMware Workstation 8. I need it to learn and practice the use of the Active Directory. I've also set up 3 Windows XP workstations connect to it, which means that they can communicate with Server 2003. What is lacking is the Internet connection on all of them. When I run ping 8.8.8.8 in one of these virtual machines, I get, 'Destination host unreachable.'

  I'm not sure, what if the problem comes from the settings in Windows or the settings of the virtual machine.

  Can someone help me?

  Thank you, guys. I was finally able to put in place. It was quite an ordeal to deal with IP addresses and virtual networks. Here's how I did (in the screenshots) in case someone else needs it.

  (I also confess that it is perhaps one of the ways to implement. Maybe there is an easier way to do it with DHCP...)

  1. in your computer where is installed VMware Workstation 8 begin the "Virtual Network Editor." It is located in the folder of installation of VMware Workstation. And implement the network following (VMnet2 in my case):

  

  2 then in VMware Workstation itself in the virtual machine when Windows Server 2003 is installed set up two network as connections:

  This one is for external access to the Internet:

  

  And this one for intranet communications AD:

  

  3. then in the machine virtual de Windows Server 2003 set up what follows for two network adapters:

  For Internet access:

  

  Then, you need allow this connection to share:

  

  And then for the ad access to workstations (ensure that the static IP address is in the range specified in the virtual network over VMnet2 network editor). I've also set up DNS to 127.0.0.1 because I installed on this Windows 2003 DNS server:

  

  4. from the Windows 2003 VM try ping 8.8.8.8. It should work now.

  5. go to each workstation, in my case, Windows XP, each in its own virtual machine and set up the network in the VMware Workstation as follows:

  

  6. then in the virtual machine, configure the network connection for Windows XP workstation. Don't forget to assign a new static IP address for each workstation, which not coinside with IP of the domain (this IP address must come from the range specified in the virtual network over VMnet2 network editor):

  

  7. try first ping the domain, in my case ping 192.168.237.128. And then Internet, ping 8.8.8.8. The two should work!

  Continue with steps [5-7].

• Cannot turn on the virtual machine in VMware workstation

  Hello

  I have windows 2008 stocked VM of windows 4.1.Inside ESX VM 2008 I installed VMware workstation and created the virtual machine in vmware workstation. When I have tride to power on the VM iam getting error below. Please help me.

  "Running vmware workstation in a virutal machine requires external thr virtual machine is configured to run the vmware esx host operation system.you may not power on a vierutal machine until the external virtual machine is reconfigured.

  Thank you

  Victor

  This is the VM vmx nested - you must add this line to the external virtual machine - one who runs in ESXi

• Import the virtual machine created with .exe files

  Hello

  I'm new in the world of the virtual machines, and I'm sorry if I'm going to say something stupid.

  I take a .net class and the teacher has a virtual machine (windows XP with software) ready to pose with 4 .exe files.

  I installed VMfusion but now I have no idea how / if I can import the teacher VM fusion.

  Is this possible? If this is not the case, what can I do else?

  Thank you very much

  Luca

  Find a Windows PC and run the exe files to extract the virtual machine, precompiled.  Just copy the folder of the entire virtual machine on your Mac, and then open/run the virtual machine using the merger.  VMware virtual machines are portable between products and host operating system - there should be no reason to "convert" or "import".

• Students who need assistance for a virtual machine to run on hyper-v inside vmware workstation 12

  OK sorry first time here. I am currently a student and I have windows running R2 server 2008 as a Workstation VM. I activated the Hyper-v technology and got of no problem, the question I meet is that when I go to start a virtual machine, hyper v, I get the error failed to initialize. Initially, I had a mistake before, who told me he failed because he would not score, I think I've fixed this error by changing the. VMX file. I need to be able to start these machines virtual hyper-v because I am doing some laboratories for a class. Ideas, suggestions or help would be appreciated.

  Thank you for taking the time to read. I have attached a few screenshots of the error.

  Your processor is a Haswell, that supports AVX.  This problem occurs because Windows Server 2008 R2 does not support the AVX feature. See https://support.microsoft.com/en-us/kb/2517374 for a fix or a workaround.

• Run a virtual machine with a graphical interface on a host without GUI

  Hallo

  I want to install a simple Windows 7 for some tasks bit where I need Windows on my server Ubuntu 14.04. This server has no GUI (no X) and should have any.

  Already, I've installed the virtual Windows machine on my workstation to 12, so I would just copy the vmdk on my linux server and run it, maybe put something in the vmx file.

  But I do not know is that it's all means possible.

  Is it?

  Is there any player or any application for ubuntu VMware when there is no X system (on ubuntu), where I can run virtual machines with GUI inside?

  Maybe another virtualization tool, vmware not?

  I think that this exact question already somewhere, but I haven't found much question where comments lacking a GUI, but not the host.

  I need a guest-gui on a host without gui (where I have only the terminal).

  So maybe it's not possible at all, so please tell me a 'no', so I won't expect more

  Thank you to

  Frank

  EDIT: oh, this seems to be another question unanswered it is too difficult or too stupid?

  Hi Frank,.

  Now that would be stupid, having a text Installer, and then not allow the virtual machine to run. I think it should work, but you must pass the nogui option.

  Vmrun help:

  beginning

  (Supported only on teams

  Workstation.)

  Starts a virtual machine (.vmx file) or team (file .vmtm).

  The default graphical user interface option starts the machine in an interactive way,

  What is necessary to display a user interface of VMware.

  Nogui option suppresses the user interface,

  including start-up, to allow dialog box not interactive

  writing scripts.

  [gui | nogui]

  refer to the manual of vmrun: VIX API Documentation

  Edit: hmm... Now, I see that you have already tried the nogui option. You might be able to install the package libxinerama, but he could hang out in a lot of dependencies.

  FWIW, vSphere is pretty much what you describe a system not GUI to run GUI invited, so it shouldn't be a problem at all.

  Unfortunately, I don't have a host linux without X installed handy here, so can't test here without the implementation of a server without head myself.

  You can also try to run the client via the command vmware:

  VMware Workstation 12 Pro Documentation Center

  --

  Wil

• Newbie needs help in the installation of Visual Studio in Windows Server 2008 in a new virtual machine created in Workstation 9

  I'm extremely new to VMware and hope this is the right forum for a question as fundamental.

  I created a new virtual Workstation 9 machine and have installed Windows Server 2008 as the guest OS.  Now, I would like to install Microsoft Visual Studio 2008 in addition to that from a USB key.  How can I get the virtual machine to see the USB so that I can run the autorun.exe installer?

  Thanks for the tips.

  Thank you anthonyrr.  That's what I was looking for.
  I want to score your like the right answer, but I don't no where to do it.  Needs to be done by the administrator of the forum?

• Need a script for virtual machine availability

  I know there is a metric for sys.uptime.latest which pulls the elapsed time in seconds surveyed of the virtual machine startup. Two questions

  This allows VM cacluate uptime in a perspective of avalability host?

  It only takes into account availability time between reboots to the vCenter level, or it takes into account all the running time? (example: uptime since a restart triggered via vCenter client vs a shutdown - r resulting in a virtual machine)

  Does anyone have a scipt that could be used or modified to give VM uptime? PowerGUI has a performance data plugin which can show it on a unique basis of VM. But I need to interview all the data for the whole vCenter and all virtual machines.

  Thank you!

  The metric of sys.uptime.latest gives you the time since the last poweron of the virtual machine.

  All reboots of BONE, of in the comments or via the vSphere client, do not reset the counter.

  This script gives you a report of the availability for all your virtual machines

  $vms = Get-VM Get-Stat -Entity $vms -Stat sys.uptime.latest -MaxSamples 1 | ` Select @{N="VM";E={$_.Entity.Name}},@{N="Uptime";E={$_.Value}}
  

• Servers running on virtual machines licenses?

  Hi all

  I have a question on the implementation of license on VMware ESX 3.5 VMs servers.  Some applications have licenses FLEXLM is fixed on the MAC address of physical servers or USB dongle on the server.

  If I intend to move these physical servers to virtual how changes in regimes licenses for these applications?

  Previous experiences on the same will certainly help. Thank you.

  Concerning

  Sirot

  Yes, we run license servers in virtual machines.  For license servers that are associated with the MAC address, you can statically configure the MAC to a virtual computer, but the license server will need to be updated with the new MAC address.  For license servers that use a USB dongle, USB Anywhere of Digi is the best route and we are currently using this solution.