I neeed an example of a device custom for brushless control throught Canopen communication

Similar Questions

• Using global variables in a device custom

  Hello world

  I have problems with the passing of data through my device customized using global variables. I want to allow a user to select a RIO device address when you set up the system definition file. This is recorded in a global variable using the hand Page VI. I would later use this RIO device address in RT driver to deploy a bitfile. I can hard-code, but it is much more convenient to use a global.

  When I try to store the address of the global variable, it updates the value temporarily (I confirmed that the structure of the event recognizes the change of value). When I click the node of the tree to define system linked to the Main Page VI and then click on it again, the hand Page VI runs again. I wrote the code to repopulate the address of device of RIO with the last value stored in the global variable, but it is empty. I've included the VI global variables in my build, so I can't imagine why it can reset this value.

  Any help would be appreciated!

  Thank you

  Mitch

  Have you tried to use the custom device properties to store this value instead of GVs?

  Configuration VI, you can set this property, and if I'm not mistaken, you can read these properties on the RT driver.

• Device custom 3D-graphics

  Hello

  I tried to create a custom device allowing the display of data in 3D graphics. I created my device custom graph XY Add - found on the Web site OR in order to have the right model. But load in my workspace, error 1003 has occurred (see error.jpg).

  Can someone explain to me how do I solve this problem?

  Hello

  I assume you have copied only the model (Graph - Graph.vi 3D) display in folder view models?

  If so, the problem might be related to missing dependencies of your view model. I suggest that you create a distribution source of your view model and try again.

  We have a tutorial interesting on how to create objects of the custom for NI VeriStand workspace:

  http://zone.NI.com/DevZone/CDA/tut/p/ID/9989

  You can also view this custom, view model which is similar to yours with respect to dependencies:

  http://decibel.NI.com/content/docs/doc-5705

  Let me know if that helps!

  Thank you

  Tom

• Send message device custom Stimulus Editor

  Hello

  We are currently implementing a custom for Veristand MODBUS device. We have a .vi work for the modbus data reading.

  What we want to achieve is a request / type of the sequence of stimulus response, read various registers based on their ID to register.

  Based on the record, we don't need to read them all from time to time.

  Based on what I read so far; using channels seems a bit convenient to do so. My new approach is based on the creation of a personalized workspace component where I am able to communicate through the "Send custom device message. This allows me to make the request / response approach type.

  However, the problem seems that connect to the executor of the sequence in real time. Someone at - it a good way to do this? Either by sending the message from device customized directly from a sequence in real-time, using the variables in the workspace?

  The other alternative is to establish a path that tells the engine of Veristand RT when to ask, and if a response is present.

  Best regards

  Jørgen

  The problem is that the sequences in real time are run directly on the target, they have no connection with the workspace.

  I would say to that approach custom device string is the only. Your custom device isn't required to read all records periodically, just create channel 2 outputs and 2 inputs,

  on the entries, you set RegisterID and update? and the output you set data and updated?

  Any time you want to read something to set the RegisterID and the update of entry? true to indicate the custom device to actually read something and wait for the update release? to become a real

  PSEUDOCODE

  Timeout = 0.5

  RegisterID = 1

  in_Updated? = true

  Yield - ensure in_Updated? set to true to 1 veristand engine cycle

  in_Updated? = false

  - then you just wait for the custom device report data is refreshed

  multitasking

  Task1

  all out_Updated? is false

  stoptask (task2)

  [at this point you have updated of the valid data in the custom device data]

  Task2

  Wait (timeout)

  stoptask (Task1)

• Customized for the RT FIFO device details

  Hello

  I have a few questions about the FIFO VeriStand in a custom device asyncrounous.

  I saw a post earlier where a - 1 to the function of reading of FIFO of RT for him to wait indefinitely for an item to enter the FIFO. This allows pseudo - synchronize the PCL with a device custom asyncrounous. I wonder if this causes the boundary wire custom sleep or it stay active and keep returning? Is it possible to change the polling to blocking?

  Another quick question, if I only want to write to the RT FIFO when the data has changed it will cause unforeseen problems? As the channels time or need to wake up or something? Certain conditions can only write channels once every 1000 iterations of the PCL and loop device custom.

  I know that I can not write the channels selected in a FIFO RT, but can I create multiple FIFOs in a custom device to actually do the same thing? I imagine then having the outputs 1, outputs etc 2 in VeriStand.

  Thank you

  B

  Hi B,

  If you look at the RT VI pilot generated from custom device model you will see exactly what is happening. If you set the time-out for the reading of FIFO-1 then the botton loop will be essentially suspended unless there are items to read in the FIFO. Meanwhile, the thread will always be active because the RT read that VI is querying data during the time specified in the timeout.  I don't think that there is a way to change the FIFO mode to blocking since the dismissal of the FIFO is spent Veristand engine to the RT VI driver.

  

  The PCL writes and reads data from and to asynchronous custom FIFO device at each step of the execution. In your custom device, you can configure to read and process data of the 1000th step. I don't see any problems with it.

  You can have a FIFO for input channels and a FIFO for the output channels. You can write to an output channel given by writing data in a function index element in the output array that is passed to the function RT FIFO Write.

• How to get the device model, for example app works on PlayBoook or BlackBerry 10?

  How to get the device model, for example app works on PlayBoook or BlackBerry 10?

  You can use this class: http://goo.gl/GtMLP for information on devices

  something like this:

  String myDeviceModel = android.os.Build.MODEL;
  String myDeviceBrand = android.os.Build.BRAND;
  String myDeviceDevice = android.os.Build.DEVICE;
  

• Error installation software device driver for removable devices in Windows Vista x 64

  I have Windows Vista x 64 installed on my PC and nVidia Forceware motherboard and graphic cards.

  When I plug in any removable drive into my USB 2.0 port, Windows starts the installation of the device driver software and then sees it as an unknown device. The dialog where he asks me if I want to 'locate and install driver software', 'Ask Me later' or 'don't show this message for this device.

  I select the recommended option: "locate and install driver software.

  I click 'Continue' when Windows asks me permission to continue.

  Then, when the execution of the installer of the software in the bottom right of my screen, the installation of driver software for device, it shows "unidentified device failed.

  Then another window pops up saying this:

  "Found New Hardware - device unknown".

  Windows encountered a problem installing the software driver for your device

  Windows found driver software for your device but encountered an error trying to install it.

  Kodak

  An error occurred during the installation of the device:

  The driver for this device is missing a necessary entry. Maybe it's because the file INF was written for Windows 95 or later. Contact your hardware vendor.

  If you know the manufacturer of your device, you can visit their website and check the support section for driver software. »

  That's what he does when I'm trying to connect my Kodak Easyshare M550 digital camera. I would go ahead and contact Kodak, but the problem seems to extend to ANY removable device on my computer.

  For example, I have a Lexar Flashdrive. When I plug it into my USB 2.0 port, it Windows says the following:

  "Windows needs to install driver software for your USB Flash Drive", etc...

  'Install the device driver software', 'USB Flash Drive search Windows Update'...

  Then a window opens asking me to "insert the disk that came with your USB key. Problem is that no driver disk not supplied with the hardware that Windows Vista is supposed to come with the drivers. I know this because the camera and usb flash drive worked very well until I reinstalled Windows Vista on my new hard drive (new installation, because my old hard drive crashed) and I've NEVER had to install device drivers for Windows to recognize it as a removable drive and operate automatically.

  Also, I installed Daemon Tools Lite and I had to manually "Update" the device driver to point to the "Windows\INF" folder in my hard drive, after copying the cdrom files needed for the specific subfolders for windows to let the program assign a drive letter for the drive virtual it creates.

  I think that perhaps not all device drivers have been installed when I installed Windows Vista, this time. If that's the problem, I don't know how that could happen, nor how to fix it, but I really prefer to find a way to solve this problem without reinstalling Windows Vista again. I don't mind not manually install the drivers as long as someone can show me what files to copy and where to find them on the Windows Vista disk that I bought at Microsoft. I KNOW that Windows HAS come with these drivers.

  If anyone knows how I can fix this, please tell me, because it's ridiculous to not be able to use any removable device readers (except for the use of all Flash drives). Thanks in advance.

  I know it can be frustrating to solve problems.

  (A) was this post or hibernation sleep?

  Microsofts troubleshooting KB

  http://support.Microsoft.com/kb/928631

  (B) the bios settings

  First of all you do not state if you tried to see if there was a setting in bios disabled USB ports during the startup. Or how the bios was set to install devices automatically. If you check your manual site or the motherboard manufacturer

  It will tell you which key to press. And where your USB ports are on or off. Some systems do not have to turn on or off.

  Plug n play OS on conscious

  could help Vista automatically recognize your USB

  (C) what version where do you use? SP1? or gold?

  (D) USB hubs may cause problems just be hubs. Power connected?

  (E) and of course if it is a case check connection in the right port. Return panel slide? plugged into port back?

  Hope something here helps

  Keith

• How can I add/install a new application Adobe Creative cloud on my computer? My Department uses VIP device licenses for education.

  How can I add/install a new application Adobe Creative cloud on my computer? My Department uses VIP device licenses for education.

  I have a set of applications Adobe CC that comes from a package installer. A new plan should be created just to install the additional application?

  What update of applications (for example, the transition to the latest version of Adobe first Pro 2014)?

  I'm sorry.

  Applications must be made through Packager only.

  You can create packages for them, if you wish.

• Generate custom for the host storage reports

  Hello

  I have a use case where a I need to generate storage reports customized for i.e host host-> screen-> storage reports (reports on :) is an extension on reports taken hosts storage supported? I've seen examples of views views of performance or monitor. Please see the attachment for details

  If the case is taken over the extension on storage reports, we add another report for the reports on as an action?

  Thank you!

  Sorry, the points supported only buckets are those described in the SDK Programming Guide (and in document ExtensionPoints.html)

• Impossible to establish a customized for xml seeded file rtf model loop

  Hi Experts,
  I am unable to create a loop in customized for xml seeded file rtf model. I use <? : for each: G_BSALINE? > FORM... FIELD <? : for EACH? END > .AM I missing something?
  
  Help, please.
  
  Thank you

  Hello

  Need more information on your XML data structure; However according to the code you provided, the synax doesn't seem right; you have a sign two points where it is not needed etc... You can use the following (although not very well if you want to use the form filed in group by, or simply display), but look at the example provided below.

  FORM FIELD...

  Example code:

  
  XXXXXXXXXX
  

  Thank you!

• "Use setting customized for history" in the tab privacy options in firefox version 19.0.2 does not work

  When I select 'use custom for history setting' in the Privacy tab and press OK button nothing happens. He returned to the story to remember. I have Windows 7 and firefox 19.0.2.

  A problem that results is firefox remember now username and password on a new gmail account.

  The problem started with the latest revisions to Firefox. In the past, I've saved usernames and passwords on multiple accounts gmail without problem.

  As a result, I had access to the gmail accounts in another browser to save all my gmail account IDs and passwords.

  Any suggestions on how to remember passwords and usernames gmail again? and/or get "Use Custom setting for the story" to work? Thanks for your help

  I had the same problem this is how I solved it
  Tools > options > saved passwords > locate the corresponding site, you will see that the user name is missing highlight and delete.
  Back to the site log in enter your password and you will then be asked to save it... That's fact

• Why is there not an option to create a custom for a simple telephone touch label?

  Why is there not an option to create a custom for a simple telephone touch label? 9. new version of iOS.

  There are. What makes you think there isn't. When you click to add a phone number, click label, and then scroll down to Custom. Type away.

• Device MANUAL for THE SONY 6000 - where can I download one?

  Device MANUAL for THE SONY 6000 - where can I download one?

  Hey there, karoline!

  Here is a link to all manuals for Sony ILÇE-6000:

  http://eSupport.Sony.com/us/p/model-home.pl?MDL=ILCE6000&template_id=1&Region_ID=1&tab=manuals#/Manu...

  The manuals are PDF files that you can download!

  Best regards

• Qosmio F60 - 12F: Alsaconf said: this audio device was not all controls

  said alsaconf "sound device is not all controls.

  00:1 b. 0 Audio device: Intel Corporation 5 Series/3400 Series Chipset Audio high definition (rev 06)
  Subsystem: Toshiba America Information Systems device 0001
  Flags: bus master, fast devsel, latency 0, IRQ 42
  Memory at d3800000 (64-bit, non-prefetchable) [size = 16K]
  Features: [50] power management version 2
  Capabilities: [60] MSI: Enable + Count = 1/1 Maskable-64 bit +.
  Capabilities: [70] Express root complex integrated endpoint, MSI 00
  Capabilities: [100] virtual channel
  Capacity: Root [130] complex link
  Kernel in use driver: HDA Intel
  Kernel modules: snd-hda-intel

  Any idea?

  Thanks for the tip!

• Customizing a tab control

  Hi all

  I am trying customize appearances of controls for my application and have been involved in some of the custom themes user interface on the Web site of NOR.

  I am now stuck in the tab control - when I open up the control editor and add a tab control and then go to 'Customize Mode', I'm not able to get the typical menu if I right click on the tab control. The typical menu for other controls include options for "Import picture from the Clipboard", "Import a file", etc.

  After that I watched the themes custom user interface on the site NOR even once, as themetal Themeand OR themeand realize, they do not have the tab control so.

  A search of the forums also revealed a thread here, dating from a few years back, about not be able to use the tab control in a custom control.

  So my quesstion is, the tab control still not able to be used as a custom control? And is there a solution?

  Best regards

  Victor

  It works fine for me in 2011.

  The method I use is to drop the tab on the front panel control.

  Make it a typedef

  Click EDIT > IMPORT the IMAGE TO the Clipboard

  Import the image we want for the tab

  Then right-click on the tab of interest

  ADVANCED > LAYOUT TAB > IMAGE ONLY

  Then right click on the new tab

  ADVANCED > LAYOUT TAB > IMPORT THE IMAGE TO THE CLIPBOARD

  If this method does not work for you, please let me know and I'll see if I can get access to a 2010 machine to try it myself.

  Kind regards

  Steve