I noticed that my base score is 3.5, which is low considering that my processor is 7.2, RAM is 7.2 graphics is 4.4, Gaming is 3.5, main drive 5,9.

Similar Questions

• Can I run After Effects with 2.4 GHZ Quad Core i7 Processor, 16 GB of RAM and a new SSD hard drive?

  I have a 2011 Mac Book Pro with 8 GB of RAM and The RAM Preview plays in 10 second Incraments. I want to pull out my hair! I don't have the sum of $ to buy a new computer. If I switch to 16 GB of RAM and get a new drive SSD will work After Effects, or I lose my $$. Please help, I have a very important project. It is about 12 minutes long and I need to add a lot of sequelae to complete my project

  First of all, you have optimized your system: Optimizing after effects of performance - Support Adobe

  Second, it looks like you are fairly new to AE and that your workflow is not very effective. Here's the deal. After effects is not an editing application, it is a graphics and compositing designed app to create shots or short sequences. In addition, I would say that more than 90% of my AE projects are less than 10 seconds, because I created shots (with handles - extra images) I'll change in the body or some other NLE. Some of these comps second 10 have a hundred layers or more. If I had to do 12 minutes into a movie I would fuck the cut first in Premiere Pro to understand what was the best way to tell the story, then each shot than necessary effects would become a separate AE comp. At the very least each scene must be a model. In most of the stories that are told, as a film, a scene are only a minute or two. The average is probably less than 6 seconds. I can't imagine putting together 12 minutes in a single model AE, not because I couldn't, but because I would probably change the "timing" of some of the cuts, edit audio or make some other change before I made and changes in the middle of a project of 12 minutes would be a nightmare.

  Here's how a work on almost all editing projects.

  • First installation in a NLE such as Premiere Pro until the story is logical
  • Put the shots in AE requiring animation or effects
  • Inside AE, I first make a test pencil to check the overview and animation timings with the Panel of the model to 50% or even 25%, and automatic resolution scheduled to ensure that the timing is ok
  • Effects are added and critical frames are checked 100% for color and everything else but I rarely to ram preview several frames because I'm already happy with the calendar
  • The model is sent to the SOUL (Media Encoder) or sometimes the cue to render to render in a production format appropriate (usually 10-bit or better, often a sequence of images)
  • If the model is sent to the SOUL I continue to work on the next shot until I finished all the effects work
  • The effects of rendering images are reduced in the NLE to replace shots in the rough cut and editing is polite
  • The project is then added to the hearing for the final mix
  • The final color ranking is made - usually in the category of speed or resolution
  • The final product is made to a production for archiving format and a format of distribution (usually h.264 mp4)

  There are a lot of bounce back, but it's the most effective way to work on any project. Have you noticed that an overview of full resolution RAM full length does not at any time?

  If installation requires only a few short shots or sequences to AE, I will occasionally use Dynamic Link, but most of the time all the effects work is made. It just makes it much more efficient.

  I hope this helps.

• I noticed that when I tried to clean my dvd - rw drive d drive was full? How can I clean that upward?

  Original title: my dvd rw drive is full

  I noticed that when I tried to clean my dvd - rw drive d drive was full?   How can I clean that upward?

  "kakbramer" wrote in message News: * e-mail address is removed from the privacy * .com...

  I'm sorry while shouting did not mean too.  Well I use to be able to watch videos and burn and watch TV on internet, now it used to me let burn, and it won't let me watch my DVDs on the pc and internet tv stops constantly.  I had a problem about six months ago, and the computor guy deleted all my files that he said so he could install a new thank you windows

  I know you didn't want to scream... Not to be too critical, but it really looks like you need a new 'computer' man as it is inexcusable to erase data files when you install a new operating system, especially if it does not create a backup disk or files.   Having to reinstall programs is normal, but the data must never be lost.
   
  You apparently have different issues that might be related to malicious software and drivers a bad or hardware problems for your computer.  I recommend that you take a small reputation of the computer "mom & pop" type computer store to have your repairs.  Big box stores, such as Staples, Best Buy, etc. are NOT reputable in computer repair.  Take installation discs you have for the computer, and a good description of what is happening.

• I noticed that my user name in the C drive has disappeared and is displayed under the desk

  original title: save files on the net / backup of the files in the C drive

  These 20 to 30 days, I noticed that my user name in the C drive has disappeared and is displayed under the desk. In addition, whenever I try to save a file on the net on my laptop, this allows me to record only at this location:

  C:\Users\vijai\AppData\Local\Microsoft\Windows\Temporary Internet Files\Virtualized\C\Users\vijai\Documents

  Also in the Solution Explorer, while all other folders category, like documents, pictures, music etc appear in the left panel, these do not appear in the right panel. I also note that a "Application Data" folder appeared under my user name and all files stored in this folder only.

  Can someone help me solve this problem

  Hi, VIJAIRAGHAVANP V,.

  You can try the following steps and check.

  Method 1:

  You can try a system restore to a prior restore point before you have been affected by the issue.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Method 2:

  If you are still facing problems then try creating a new user account and check if the problem occurs:

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  If you are not faced with any issue, then check out the following link to correct a damaged account.

  Fix a corrupted user profile:

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Hope this information helps.

• After the last mandatory update, I noticed that foulders image in my external hard drive would be stuck. This happens often.

  After the last mandatory update to Vista, I noticed that foulders image in my external hard drive would be stuck. This happens often.

  Please fix this.

  Hi Mikepolifka,

  ؠ What updates did you install on your computer?

  Try SafeMode as the first step.

  Safe mode is useful for troubleshooting problems with programs and drivers that might not start correctly, or that might prevent Windows from starting correctly. If a problem does not reappear when you start in safe mode, you can eliminate the default settings and basic as possible cause device drivers. If a program recently installed, device, or driver prevents Windows from running correctly, you can start your computer in safe mode, and then remove the program that is causing the problem.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  You can also perform a restore of the system on your computer and check if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  If it works fine after system restore you may have to manually install updates one and check the status.

  Previous post: the result.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• I have Adobe creative cloud and that you may have noticed that I have mu, tiple versions of programs such as PhotoShop and After Effects, take a lot of space on my hard drive. i.e. CC of Photoshop, Photoshop CC 2014 and 2014 CC Photoshop. I can uninstall

  I have Adobe creative cloud and that you may have noticed that I have mu, tiple versions of programs such as PhotoShop and After Effects, take a lot of space on my hard drive. i.e. CC of Photoshop, Photoshop CC 2014 and 2014 CC Photoshop. I can uninstall one or both of them?

  CC and CC 2014 are separate apps, you can uninstall the version that is not necessary, CC 2014 is the latest version.

• How to remove an incompatiable extension from your computer that has been disabled by Firefox (Smart Printing button 1.0), but don't find it on the hard drive?

  I was cleaning my Add-ons, etc and noticed that extension, Smart Printing button 1.0 is disabled b/c, it is not compatible with my current version of FF 18.0.1, why not uninstall and go? I looked for answers on how to do it, but come up empty. I searched my C drive for the HP, print Web program (such as suggested by the forums HP) and found nada, I think I might have deleted (not uninstalled correctly) as I felt as I didn't need and now the extension. How can I remove the extension of Smart Printing button 1.0 on the list of Firefox extensions in the current situation?

  This extension is likely to have been installed in the world and is located on via an analysis of the registry.

  • https://developer.Mozilla.org/en/Adding_Extensions_using_the_Windows_Registry
  • HKLM\Software\Wow6432Node\Mozilla\Firefox\Extensions\extension-id

• Service Pack 3 for Windows XP does not recognize that it is connected to the USB ports. I get a notice that something has been plugged, but Windows fails to recognize regardless of the question.

  Service Pack 3 for Windows XP does not recognize that it is connected to the USB ports. I get a notice that something has been plugged, but Windows fails to recognize regardless of the question.

  Disconnect all USB storage.

  Run this tool by do right click and choose 'run as administrator '.

  Of course, all first extract it:

  http://www.Uwe-Sieber.de/files/drivecleanup.zip

  If your XP is 32 bits, use the Win32 folder.

  Reset.

  If you still can't find the drive, assign it a drive letter in disk management.

• A user to our small business reports that she one day noticed that the contents of its files to Outlook Express disappeared. Records are intact, but the messages have disappeared.

  Outlook express content of some files went

  A user to our small business reports that she one day noticed that the contents of its files to Outlook Express disappeared.  Records are intact, but the messages have disappeared.  Strangely, what happened to half of its files; the content in the other half is still there.

  She uses Outlook Express 6.

  Suggestions?

  Pamela

  In addition to comments of Bruce, likely OE compacted messages and in doing so, he probably wiped out the where they are absent.  Check your Inbox and message store bak files which are backups dbx files prior to compaction (see www.oehelp.com/OETips.aspx#2).  If you cannot find the bak files, then you will probably use the extract of the service drive of my DBXpress program (see www.oehelp.com/DBXpress/).

  Steve

• MY DELL INSPIRON 531 AKA WINDOWS 32-BIT VISTA WITH NO SERVICE PACKS BASE SCORE IS 3.0!

  My computer has a low base score. It is the 3.0. My computer is Windows Vista Ultimate Edition. It's on a Dell Inspiron 531 and 32-bit. It has no service pack. It is also 3.0 is shown in the graphics of games.

  I'm a standard user on my Windows Vista computer and I donot know the administrators password!

  Sincerely,.

  Numbuh3wearsabutterflycoutume

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-the-Windows-experience-index

  What is the Windows experience index?

  Read the article above about it.

  Your score of 3:

  A computer with a base score of 3 is able to run Windows Aero and many new features Windows Vista at a basic level. Some of the newWindows that Vista advanced features would not have all of their functionality available. For example, a machine with a base score of 3 can display the Windows Vista theme at a resolution of 1280 × 1024, but might struggle to run the theme on multiple monitors. Or, it can play digital TV content but might be difficult to read the content of the TV high definition (HDTV).

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  It all depends on what hardware you have installed, on the coast.

  And make sure you have latest hardware drivers Vista installed on the site to manufacture ' e, not through Windows updates:

  http://support.Dell.com/support/downloads/

  See you soon.

  Mick Murphy - Microsoft partner

• What does the base score of my computer?

  Hello Sir, as I was looking through my knees, I found an option to rate my computer. so I had done the test and got a result that the base score of my knees is 3.2... that score base what to say? is my turn works well with regard to the operating system that had been installed on my lap. could you please help me about this problem.

  The base score is determined by the lowest score on the list of components.

  In your case, I suspect that its graphics, correct? If you have updated all the drivers, make sure you only get them from your site to manufacturers of portable and NOT via winupdate updates recommended

  Except that what the specifications of your laptop?

• While Windows anytime upgrade from Win7 Home Premium to Win7 Pro received the notice that failed.

  Original title: upgrade Express failure.

  I'm doing an anytime upgrade from Win7 Home Premium to Win7 Pro. I get a notice that failed and get back to home premium.

  Any thoughts would be appreciated.

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  -------------------------------------------------------------------

  (A) if at any time the upgrade fails: run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  --------------------------------------------------------------------

  (B) If Internet Explorer is not configured as default web browser,
  you need to make sure and try the Express upgrade.

  --------------------------------------------------------------------

  Only one solution was either by picking up the Internet
  and removal of SP1 - or a combination of both. Then re-installation of SP1
  Save this method for a last resort.

  --------------------------------------------------------------------

  (C) you get a PIN number with the "Anytime Upgrade", if yes enter the PIN here to obtain a product key: https://windows.getmicrosoftkey.com/

  Support for your product key: https://windows.getmicrosoftkey.com/Home/Support

  --------------------------------------------------------------------

  (D) stop and restart your computer.

  (1) implementation of the reinforced system - method #2 tool (download and run the tool: "Checksur.exe")
  http://support.Microsoft.com/kb/947821
  (System resources, such as file of data, even in the data memory and registry data, can develop inconsistencies during the lifecycle of the operating system. The system update tool attempts to resolve these inconsistencies).

  (2) disable any security software before attempting to upgrade

  (3) disconnect external devices of unneccesarry.

  -------------------------------------------------------------------

  (E) if still Anytime Upgrade fails, turn off User Account Control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4 restart the computer

  5. repeat the process "Anytime Upgrade"

  To start the upgrade process:
  Click on start/search and enter the words: Express upgrade
  Then, in the list of the search results, click on "Windows Anytime Upgrade".
  Then follow the prompts on the screen anytime upgrade.
  Basically, all you need to do is enter the Windows 7 upgrade product key.

  Another method:
  (Located at the top right) Start/Control Panel/small icons option / click the "Windows Anytime Upgrade".

  -------------------------------------------------------------------

  (F) if it continues to fail, try the following 3 methods:

  Method #1
  (1) run Chkdsk and see if it helps.
  Click Start / type: CMD and right click 'CMD' and select 'run as administrator '.
  At the command prompt, type: chkdsk /f /r
  Restart your system, hard drive of your computer is analyzed to find errors and will try to correct them.

  (2) run the Memory Diagnostics to look for problems with the system hardware. Type of memory in start search and press ENTER to open the memory diagnostic tool open. Click restart now and check for problems. Your computer will restart and will start the diagnostic program. Please note the reported errors.

  Method #2
  1. click on start, type: "msconfig" (without the quotes) in the box and then press the ENTER"" key.

  User account control permissions: If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under "Selective startup", uncheck the "Load Startup items".

  4. click on the 'Services' tab, click to select the box "hide all Microsoft Services" and then click on disable all.

  5. click on 'OK '.

  6. When you are prompted, click "Restart."

  7. once the computer has been restarted, check if the problem is resolved.

  Method no. 3
  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

  -Anytime Upgrade may not work for all versions of Windows-

  Note: Retail 'Full' or 'Upgrade' product keys will work when you use the Express Upgrade feature.
  Upgrade Express 'can' not work (check with the manufacturer of the computer support team) for users who have the OEM and integrators systems product keys, this applies also to the VL (Volume License)-MSDN Academic Alliance (MSDNAA) / DreamSpark or pedagogical keys that does not / do support the Anytime Upgrade option. KMS users consult your administrator before attempting to perform an Express upgrade.

  J W Stuart: http://www.pagestart.com

• After I unchecked the toolbar Google and Google Chrome box and as I checked 'install', I noticed that the box of Google Chrome has been verified again.  How can I prevent installation of Google Chrome (assuming it has been downloaded)?

  Re: update Adobe Elements and drive

  I unchecked the box that allows the installation of Google Chrome and Google toolbar as well as the update.  Just as I clicked 'install', I noticed that the box of Google Chrome has been verified again.  I haven't checked the Google Chrome box.  How can I prevent the installation of Google Chrome when I authorize the installation of the update?  (assuming that some of all of Google Chrome was downloaded before I closed the browser?)

  Use the http://get.adobe.com/reader/enterprise/ offline installation program - it is not supplied with any software 3 rd-party.

• Received notice that my account is closed by Apple

  I received an email "We notice that you do not use your iTunes account because a long time so we're abligate to close your account in accordance with our policy, including your email i-cloud also."  Is it a scam?  I buy via iTunes almost every month.  By clicking on the link to keep the account open and they want information of credit card and I'm not comfortable with that.  I'm worried because I need my icloud and my email.

  It is not Apple, it has a phishing e-mail attempts to get your account details and payment - you can transfer to Apple: and then delete it [email protected] .

• I'm unable to access iCloud parameters, that the icon is there, but when I click it, it does nothing. Also recently I noticed that my personal hotspot option is no longer available. Nobody knows what can happen?

  I can't access iCloud parameters. The icon is there, but when I click on it nothing happens. I went into general settings to ensure that no restrictions were on. Also recently noticed that the personal hotspot service is no longer available on my phone. How something like that just disappears?

  For Personal Hotspot, you must ask your cellular provider.

  What setting iCloud does not work?