I/o current or voltage check with the switching matrix

Similar Questions

• Is there a way to know if the current modules are compatible with the latest upgrade of Firefox before running the update?

  I want to know if my Add-ons and current themes are compatible with the latest update of Firefox before running the update.

  Hello azdec.

  You can check the add page - we in addons.mozilla.org so it's just one or two. In my view, there is an extensions in the Gallery of modules that allows you to see if your modules are compatible with the newer versions of Firefox. But you'll have to look for them, because I don't know how it's called.

  I remind you that if you want an add-on to be compatible with a newer version of Firefox, you must contact its author.

  In addition, the version of Firefox you are using right now has been suspended and is no longer supported. In addition, it has known bugs and security problems. I invite you to upgrade to the latest version of Firefox, for maximum stability, performance, security and ease of use. You can get it for free, as always, to getfirefox.com.

• Current device is registered with the former owners of Apple ID, not allow me to connect with my Apple ID?

  Current device is registered with the former owners of Apple ID, not allow me to connect with my Apple ID?

  The former owner must unlock with their password, or give you the password. Otherwise, the phone doesn't help you and no one can help you. Get your money back if you can.

  What to do before you sell or give away your iPhone, iPad or iPod touch - Apple Support

• I can't uninstall microsoft silverlight. I get the message that I need to check with the installer of the hotfix package.

  Original title: microsoft difficulty 50747

  I can't uninstall microsoft silverlight. I get the message that I need to check with the installer of the hotfix package. Pls help!

  Hello

  Because the problem is related to Silverlight, I suggest you post this question in the Microsoft Silverlight forum.

  http://forums.Silverlight.NET/forums/

• Cannot open Photoshop app error - this cannot run on your PC"'to find a version for your PC, check with the software publisher.

  I had a update to my Photoshop CC this morning, after having updated, I now have the following Windows message: "this application cannot run on your PC" 'to find a version of your PC, check with the software publisher. No error code not nothing. Anyone else is and you know what?

  No doubt sounds like something went kablooey; I updated my copy of CC PS this morning without any problems on Windows 10. Try a complete uninstall/reinstall again?

• After getting a new mac mini, all of my adobe products worked except photoshop. I get this message. Check with the developer to ensure that Adobe Photoshop CS5.1 works with this version of Mac OS X. You may need to reinstall the application. Don't forget

  After getting a new mac mini, all of my adobe products worked except photoshop. I get this message. Check with the developer to ensure that Adobe Photoshop CS5.1 works with this version of Mac OS X. You may need to reinstall the application. Don't forget to install the updates that are available for the application and OS X. I bought it originally, but do not know were my installers are. Can I get a new installer?

  1st, CS5 is 4 + years old so you MAY have problems with the latest Apple operating system

  Yosemite sometimes has problems, often related to the 'default' permissions that need to be changed

  -solution https://forums.adobe.com/thread/1689788 of a person

  - and a Java update https://forums.adobe.com/thread/1507936

  -Update may break things https://forums.adobe.com/thread/1772260

  2nd, try previous versions http://www.adobe.com/downloads/other-downloads.html

• How can I get the sim unlock card or carrier unlock t mobile USA, I use my phone in India and my sim card does not work and when I checked with the apple support, they said, it can be locked my previous carrier T-mobile USA, which is a solution

  How to unlock carrier T - Mobile USA, that I'm unable to use my phone in India as it says sim does not, I checked with Apple support they said previous carrier may have locked

  You will need to contact the carrier, it is locked to and follow their unlocking procedure. Only the carrier to ensure that it is locked can allow and process a request for unlocking.

• Currently using Elements 8 with the Organizer, tags, etc. on a Windows PC.  Buy MacBook Pro and want to put 13 and first elements? on my Mac.  How is it difficult to download the old files for MAC?

  Buy Macbook Pro and thinking about buying a package Elements and Premiere Elements for my new Mac.  I've been using 8 items for a few years and several thousand organizes and editing photos on a Windows PC.

  How hard is it to transfer from the PC to the MAC?

  Is my pictures organized with the names of tags etc all back from 8 to 13 new elements?

  Hi Robert

  You can find these links in the transfer of your catalog to your mac:

  Guinot

  Using Backup, Restore to move the catalog | Organizer | Elements 6 or later version

  • Transfer your catalog from Windows to Mac OS
  • Special Notes If you restore a catalog from an earlier version of Photoshop Elements

• Can I activate a version of windows and then check with the serial number on a version for mac download adobe acrobat?

  Hello

  I regret that I bought a windows version of the teacher and student Acrobat XI, because I m using a macbook.

  What I have to return the product with the CD packaging to adobe, or can I activate my product to get the serial number that also integrates with the installed mac version?

  cordially thank you for help

  :-)

  You must exchange your product, return, cancel or Exchange an Adobe order

• Best wireless network installation with the switch TP-Link

  Hi all

  Few question numpty maybe, but what follows... We just moved to a new (larger) home with thick walls and I want to set up a new wireless network.

  The current installation is:

  Fiber cable entering the House in the basement and connected the modem to the service provider that provides 150 mb internet. I changed the capacity wireless on the ISP's modem and connecting an airport extreme (2014 model) via the LAN to the modem. The extreme is in the office but on the 3rd floor is having connection problems than you can imagine. All rooms have access points CAT5e who all meet in the basement. I have two spare Aiport express and two Apple TV that I would use. Also I bought a TP-LINK 1000mbps (16 channels) Network Switch.

  Could someone please tell how the best set-up of my home network. For example, the Airport Express to the 3rd floor connected to the switch (wired) network or to an extreme in the Office? Apple TV also connected to the network switch?

  I would like to end up with a solid wireless network that passes without problem from extreme to Express necessary each time you walk and you want to use an Apple TV for television on the ground floor and one in our room.

  Many thanks and apologies once more for this very basic question... I have expanded my front (extreme Express) wireless network but just don't know how best to use the switch.

  Thank you

  The simplest up set... which is almost always the best game in place... would be to connect the switch 16 ports to the modem/router and then connect devices to the switch. In other words, if your modem/router has 16 + Ethernet ports, the simplest network configuration would be to plug as many devices as possible directly to the modem/router.

  Other variants are possible, for example, the network might look like this:

  Internet > Modem/Router > AirPort Extreme > switch > devices... or, you can connect certain devices to ports Ethernet on the AirPort Extreme and some to the ports on the switch.  One thing to keep in mind however... If there is a problem... Troubleshooting may not be easy since it will be difficult to know where the problem actually lies.  Much easier to all have, or of possible devices, connect to the switch.

  Unfortunately, the AirPort Express devices will be of real bottlenecks on your network.  These devices are notoriously slow as well as wireless, and even if they work well, the speed will be does not exceed 100 Mbps... since it's the speed of the port to the AirPort Express.  In fact, I expect each Express to provide a wireless signal in the range of 50-60 Mbps.

  Another thing to keep in mind of the wireless network is that Macs will usually a good work of tilting automatically to the point of wireless to the other as moving from one place to the other in the House... but the iPhones, iPads, PCs, and other mobile devices will do that very well... If they do at all.

  So with these devices, you will need to get used to temporarily disable the WiFi on the device and the device when you move in one region to the other, and then turn WiFi on must generally then pick up the signal from a nearby wireless access point.

• use robocopy with the switch /MIR safe?

  Hello

  I use Robocopy to copy my phone book c:\users\username on a second hard drive (D :). No problem. But I also want the mirror of this second hard drive on a third drive hard (e). I have been using the /MIR copy/mirror hard drive D: E: switch.
  We know that /MIR deletes several files from the disk of destination files (e: in this case) if they no longer exist on the source (d) drive.

  But I recently saw somewhere on the internet, there are certain risks that /MIR can also remove some of the source files in certain circumstances. Scary!
  Here is the exact quote (unfortunately I did not record the site it comes.)

  Use /MIR with caution - it has the ability to delete a file from the source and destination, under certain conditions.

  This happens usually if a file/folder in the destination has been removed, causing ROBOCOPY to mirror the source to the destination. As a result, the same files in the source folder are also deleted. To avoid this situation, never to delete all the files/folders on the destination - remove from the source and then run the backup to mirror the destination to the source.

  If in doubt, do not use the MIR, but be aware that backups will take more time.

  So I wonder if it's true and/or tailored to my needs.  The explanation above don't make much sense to me. For the moment, I have abandoned the /MIR switch and am just using the Robocopy command to copy the second HD in the third.

  Thanks much for the thoughts or advice or links.

  Jack

  The /MIR switch is NOT a two-way synchronization.  Right of the Microsoft documentation, it tells you/MIR/e + / purge.  It does not remove the source files.  The /MOV option removes the files from the source because you move them from the source to the destination.

  The /mir option is equivalent to /e plus/purge with a small difference options in behavior:

  • With the /e plus/purge option, if the destination directory already exists, the destination directory security settings are not replaced.
  • With the /mir option, if the destination directory already exists, the security settings for destination directory are replaced.

• Cannot access the IP by default with the switch Cisco SF200 - 24 p

  Hello, I just bought Cisco switch SF200-24, but I can't access to switch with default address IP 192.168.1.254.

  I set up my laptop 192.168.1.4 and connect to the Port No. 1 but I can't ping too.

  anything you can help me please.

  Hello

  Quick Start Guide:

  To access the switch using the web interface, you must know the IP address of the switch uses. The switch uses the default IP of default 192.168.1.254.
  When the switch is using the default IP address, the system LED flashes continuously. When the switch uses an address IP assigned server DHCP or an administrator has configured a static IP address, the system LED is lit (DHCP is enabled by default).

  You see the system LED flashes constantly?

• Download ACL checking of the switch

  Hello

  I have download ACL goes to the 4500 Series switches and 3750. GBA 5.2, I can see when an ACL is downloaded and it is very good, and switch, I can check for downloadable ACL name.

  My question is how can I check the DACL to see to whom it has been applied and any other available details OF the SWITCH?

  I know see the list of access shows me the ACL, but I could have the same ACL applied to many different users on the same switch and I'm looking for a way to validate from the switch to which users the ACL has been applied to.

  Thanks in advance.

  Try this:

  show ip access-list interface
  
  
      Regards
  
      Jatin
  
      

  ~ Make rate of useful messages.

• If I create a preinstallation of Windows 7 environment and run Windows Defrag with the switch/w, be it defragment files XP defragmentation analysis shows that "good behaviour"?

  I'm trying to defragment all the last possible file on my hard drive.  I was quite the journey of optimization, learning of virtual disks, ReadyBoost, command line and optimization of registry TCP, swap file optimization (investment strategy) and now for anti-virus and defragmentation preinstallation environments.

  I find it very difficult to get a defragmentation program to try to defragment files, he thinks that he can not touch.

  I learned today how to create a 64 - bit Windows 7 PE with inclusion of work from the command line defragmentation file and wonder if it will cooperate with me or not.

  And Yes, I know that some people balk at the idea of a no failure or PE defrag mode, but I insist.  There are too many files cannot be modified running in a normal Windows environment, as well as in a safe-mode start environment.

  I learned the true benefits of defragmentation via the use of hard disks in very low yield (that is another story) and want to optimize my installation in my hobby of tinkering with the software.

  What is the problem with that?

  Thank you very much.

  -TCKoerber

  Personally, I'm not interested in the file of the page, I have more than enough ram, nore the mft. And any increase in the theoretical performance will have no impact on this system

  There are third-party defrag programs with more options than the buit in defrag.

  Like I said it was just an observation

• DataGrid itemrenderer with the switch statement

  Hello

  I have the DataGrid with the columns

  < mx:DataGrid id = "dgvParagraphs" >
  < mx:columns >
  < mx:DataGridColumn dataField = "type" headerText = "Type" / >
  < mx:DataGridColumn dataField = "title" headerText = "Title" / >
  < mx:DataGridColumn dataField = "happy" visible = "false" / >
  < / mx:columns >
  < / mx:DataGrid >

  Under the type column I have values between 1 and 6. Each issue contains the content type. I have icons for each type. I want to show an icon instead of the right number. I know that this can be done using itemrenderes, but I do not know how to proceed.

  If this post answers your question or assistance, please mark it as such.

  Greg Lafrance
  www.ChikaraDev.com

  Support and Flex development services

  You might see problems with this code for scrolling, as DataGrid recycles itemRenderers, but in this case the information of the icon must be in the data.

  
  
    
      
    
    
      
        
          
            
              
            
          
        
        
        
      
    
    
      
        
          2
          
          Content 1
        
        
          5
          
          Content 2
        
        
          3
          
          Content 3
        
        
          1
          
          Content 4
        
        
          4
          
          Content 5
        
        
          6
          
          Content 6
        
        
          2
          
          Content 7
        
        
          1
          
          Content 8
        
        
          4
          
          Content 9
        
        
          5
          
          Content 10
        
        
          2
          
          Content 11