I put Windows XP on my Satellite P300

Hello.

Can I replace Vista with XP on my P300? I know I should do a XP disc with drivers Sata etc. What about drivers XP etc if it is possible?

Thanks much for any help.

I do not know what Satellite P300 you, but what you need to do is visit Toshiba support and download page under http://eu.computers.toshiba-europe.com > support & downloads
Choose your model of laptop and check are there things WXP.

Two important things:
-To install Windows XP Home edition to create Vista DVD recovery facilities. You may need for installation of Vista (factory settings) more
-It is important to install all the stuff WXP in order of good facilities. If you need help let us know.

Tags: Toshiba

Similar Questions

  • Satellite P300 - Microphone is not working after installing Windows 7

    Hello

    I recently did a clean install of Windows 7 on my Satellite P300. The microphone has been fine with Vista but does not currently work with Windows 7.
    I tried to go to the sound section and it does not list the casting Mike - just struggling. Can anyone help?

    Thank you
    James

    Hello

    Maybe you didn't install the driver for the microphone? Therefore, you will need to install the driver for the webcam, because the microphone is a part of it. You can get it here:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    After that, it should be possible to use the internal mic.

    By the way: internal what application you are using for the microphone? Skype or something?

  • Cannot start the Satellite P300-1FN - nothing happens

    Hi all

    I have recently reinstalled windows 7 on my Satellite P300-1FN and after a few minor problems, it was working fine.
    I blocked some drivers and updates, then it prompted me to restart.

    I turned it off and left while I had lunch, then tried to start and nothing happened.
    I mean nothing, not even the power led comes on. I put the battery in which I know has at least half a load and nothing.

    The fuse, still nothing changed. What is everything?
    It is quite dead.

    Any help appreciated.

    G

    > I mean nothing, not even the power led lights up.
    Sounds not good man

    Sounds like the motherboard or CPU problem because no s lights are on.

    But try this;
    Unplug the power adapter, remove the battery, wait some time (2-4 hours) and reconnect the two parts.
    Check if you could power the unit in place.

    If this is not possible then I would recommend contacting a professional technician to ASP.

    Sorry, but that's all I can suggest

  • Re: Satellite P300 with Windows7 - wireless network card can not find my BT homehub

    After istalling Windows 7 on my Satellite P300 card wireless LAN Atheros can't find my bt homehub.
    I tried to change the channel on the hub and updated to update all drivers, but still no luck.

    Any ideas anyone?

    The wireless network card is properly activated?
    This BT hub is not known to me, but check settings WLAN hub and laptop and updated on both devices to run on the standard G only.

  • Re: Satellite P300-156: keyboard freezes touch touchpad - mic is not w

    Hello

    I installed Windows 8 on my satellite P300-156 and now I have a big problem.
    My keyboard crashes when you touch the touch pad. In addition, the microphone does not work when the Windows Device Manager indicates that it is ok.

    There is no windows driver for this laptop 8...

    There are no drivers for the laptop because it isn't win 8 supported series.
    But even if there is no Win 8 drivers, the system should not freeze affecting the touchpad module.

    However, the Synaptics touchpad driver for Win 7 or 8 to win can be downloaded from Synaptics page.
    Recommend check it out!

  • Satellite P300-1 c 7 - impossible to install the audio driver

    Hello!
    I need help!

    I want to find the driver for the sound (Satellite P300-1 to 7, Windows XP). When I download the driver called "sound driver" of your site, my laptop gives me the trace message that the device for the driver cannot be found.

    Could you please tell me why this error occurs?
    Thank you.

    You have installed all the service packs for Windows XP?

    Satellite P300-1 c 7 belongs to the series PSPC4E then you have chosen the right model?
    Check again!
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    Have you installed the chipset front driver?

  • Satellite P300 - 1-9-10 SD card reader code

    Hi all

    I have a new Toshiba P300 - 1 9, good for six months, and have just for the first time I tried an SD card into the slot of the multimedia card digital.
    The card does not appear in 'my computer '. In Device Manager it shows with the yellow sign fault warning of a problem.
    Double click it gives this message "this device cannot start code 10" in the management of the disk of the card is not listed in the upper pane, but shows as a player in the lower pane without a drive letter assigned.

    If I try to assign a drive letter, I get a message saying that the operation failed because the disk management console view is not updated.
    He wants to refresh the view by using the refresh task. Which does nothing.

    I reinstalled the drivers for the SD card listed under disk drives when the card is in, storage controllers and generic volume on storage volumes. I've also updated the driver for SD host adapters.

    A card format made no difference. I know that the card reader is correct because a few days ago, I took an image updated with Acronis TI and then reinstalled the OS from the recovery media. The card worked fine then. I have now put the Acronis image and the map does not work. I had loads of driver updates on the road to Toshiba for various things (but not the card reader) through their service Tempro, including an update of the bios.
    I wonder if the bios update caused the problem. I'm debating whether the BIOS to the default setting.

    I have tried everything I can think and followed by a number of suggestions after googling the problem. The MS Knowledge Base was not very useful and many people seem to have the same problem. I am now at a total loss.

    Thank you

    cheven

    Any ideas would be welcome.

    Thank you.

    Hello

    The 10 error code means that the device cannot start.
    Card reader is not ready and is not running and therefore the SD card cannot be used and is not recognized in my computer.

    In most cases the update driver/relocation should help sort put them this question.
    Satellite P300 - 1 9 belongs to the PSPCCE series.

    The European driver Toshiba page provides the controller driver of card reader for this model of laptop. This is the driver that controls the SD card.

    I recommend that you download this driver. Access the Device Manager, and then uninstall the previous driver. Reboot the laptop.
    After restarting again the OS must find a new device and should request the necessary driver.
    Then you must point to the driver that you downloaded and should complete the installation.

    Usually, this should solve your problem.

  • Strange problem with the button "Enter" in Vista on Satellite P300-225

    A few weeks ago I don't remember exactly when, Windows Vista on my Satellite P300-225 began to spend an incorrect applications scancode when you press the Enter key. It always sends the scancode of key keyboard, even when I hit than the alphanumeric part of the keyboard. It was working properly some time ago, but suddenly, it just started acting like that. No remapping all keys.

    Since there are very few programs that Act different on these two keys, it has become quite an annoying problem.

    The strangest part of it, is that the problem seems to be somehow related to Windows Vista, as the keys are properly reported on Linux.

    If anyone has any idea, please let me know.

    > I'll give a try to uninstall the keyboard in SafeMode but.
    Please post the result.

  • Satellite P300 with XP hangs at the screen "starting windows."

    I recently bought the Satellite P300 - 01 and had XP installed on it. I have fixed all the problems except for the question, that I'm going to start.

    When I turn on the laptop it loads everything flashes on the login screen and then hangs at 'starting windows' screen If I turn it off and then again about three times this issue finally arrives with the login screen. There was an ASP.NET account, and after the BIOS update that he disappeared, but the problem is still there? Any comments would be greatly appreciated.

    Thank you

    > There was an ASP.NET account, and he disappeared after the update of the BIOS
    The whole story is really strange

    I put t know how you installed XP on this laptop and why an ASP.NET account was created or exist, but in your case I would recommend doing so again.
    Then install all service packs, hotfixes and patches of the XP!

    Simply show words on XP on P300.
    A friend of mine has installed XP on a P300 yesterday too and the XP works well
    Everything works fine!

  • Satellite P300 - 156 Windows 7 Crash problem

    Hello
    I have the Toshiba Satellite P300 - 156 PSPC4E, model and I've had this laptop for a couple of years now.
    Before installing windows 7, I got the default Windows Vista installed and it worked fine.
    Now since installing windows 7, no matter WHAT game I try and play just causes the cell to go black screen and turn off after about 5-10 minutes of play.
    I thought that this was due to an overheating problem... so I opened the laptop and cleaned all that and then put it back together again.
    (YES I checked all the wires are back where they should be and all the components are working properly)
    It did not work.
    Then I tried updating all my drivers and software ect.
    Still nothing.
    I searched on through pages and pages of search results for the same problems with Windows 7 and the game crashing... but nobody seems to know how to fix it.
    I thought it was just windows 7, but I re installed windows vista and it's always done the same thing on there now.
    I tried to install all the drivers of the model for this laptop toshibas site and not luck.
    My windows vista and windows 7 are two authentic copies.

    All the hardware is functioning normally (as far as im aware) and I really don't see what can cause this problem.

    If someone could give me some advice on what to do it would be greatly appreciated.

    Thank you

    Hello

    Which driver you use display? I m P300 owner but not on my A300, I had a similar problem that the laptop has crashed during a game. It seems that the reason was a 3rd party driver or let's say the driver of the manufacturing of the graphics chip directly. I think that because they are not prétestées on the cell and causing overheating

    So I recommend you to install the latest driver of display on the Toshiba site.

    Finally and above all what version of Windows 7 (32 or 64-bit), you have installed and what version of BIOS?
    From Toshiba Web site also shows the new BIOS versions and several versions 32 bit and 64 bit OS. Maybe you have to day/edit, who knows?

  • Install Windows 8 on Satellite P300

    As usual rushed in and installed Windows 8 on satellite P300. What error - slow, loss of functionality. How to get back to Vista was preinstalled or is there a way I can fix it to run windows 8.
    Processor Intel (r) Core (TM) 2 Duo CPU [email protected] 2.4 GHz, 4.00 (2.99 usable) GB RAM 32-bit system, x 64-based processor.

    Satellite P300 is plu laptop comes with Vista, but also supported for Win7. Unfortunately, it is not supported for Win8 so, in my opinion, there is no sense to install Win8 on it.

    Win7 works perfectly on this machine so if possible use Win7 on it. in case you want to use original Vista, you must install recovery using recovery DVD image. This way only to s to have factory settings once again.

    The question is: do you have the recovery disk?

  • Windows does not start on my Satellite P300

    Hi all

    I have a problem with my Toshiba Satellite P300-22R.
    When I start the PC, the normal start screen comes (Toshiba Leading Innovation) I can also launch the BIOS and all the stuff. But now nothing works again! I'm still in this screen, Windows will not start and when I press F2 I don't come to the BIOS. Can you help me?

    Thank you and best regards

    Angelo

    Start your laptop and press F8 to display the advanced startup options. To start Windows in safe mode, try to please.
    Send comments.

  • Upgrade of Windows 8 on Satellite P300 - possible?

    I want my P300 upgrade to windows 8. Is it possible and easy to do?

    Thank you.

    Yes, it is possible to install Win 8 but as Satellite P300 is not part of the Win8 laptop models supported, you will not find to win 8 drivers.
    You will need to search for and collect these drivers with your own hands
    While this may be a little problem but its certainly possible to use Win 8

    recommend checkign this pages:
    + Windows 8 Upgrade - Notes and Restrictions +.
    http://APS2.toshiba-tro.de/KB0/TSB2A03EL0000R02.htm

    + Level of installation of Windows 8 +.
    http://APS2.toshiba-tro.de/KB0/TSB2A03ER0000R01.htm

    + Clean installing Windows 8 +.
    http://APS2.toshiba-tro.de/KB0/TSB2903E20000R01.htm

  • Satellite P300-1CI - Windows 32 or 64-bit

    Hello

    What is het oprating system best windows 32 or 64-bit?

    I have Satellite P300-1CI

    Processor 2 GHz Intel Core 2 Duo processor T5800
    Werkgeheugen 4 GB (2 x 2 GB)
    Herd schijf 250 GB
    17-inch sit met resolutie 1440 x 900

    THX

    > what is het best operating system windows 32 or 64-bit?
    What is the reason for this question? I assume that your laptop comes with Vista Home Premium 32-bit. Right?

    Are you convinced how it works?

  • Satellite P300-172 - you can upgrade to Windows 7?

    Hello

    so I got my Satellite P300-172 for a while now, Windows Vista has always done my head in, and now I think THAT my warranty ran out, I feel its time to upgrade to Windows 7, the other reason im trying to improve because vista is unable to search for updates guard saying: an error occurred when the new updates for your computer Code 80072EFD

    Can some give me advice in weather im going to be better that the upgrade to Windows 7 or do a detail clean installation of it please?

    Hello

    Personally, I prefer to do a clean install any kind of upgrade. If you decide to do an install of Windows 7, look for drivers on the Toshiba driver page.

    http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

Maybe you are looking for