I received the error code following the 800 70641 updates
running Windows Vista Home premium 32-bit
has started having lack of problems after the update of Silverlight KB2495644
nothing has worked since the last update KB890830 malware removal tool
Have tried to use command prompt to stop the Setup program and restart.
He tried to download Installer(4.5) and every time on any program tells me it is not good for my computer.
Hi RichardBoop,
Have you tried to install the update to the clean boot? If this isn't the case, follow the steps in this link to start your computer in a clean boot state, and then install updates.
Let us know if that helps.
Tags: Windows
Similar Questions
-
I received an error code 800b0100 update. I just installed windows 7 student disc and my computer guard stop. I me trying to get the updates that might help the closing of the bottom.
Hi Happyrockgeek,
Welcome to Microsoft Windows 7 answers Forum!
This problem occurs if the Windows security .dll files are incorrectly registered.
To resolve this problem, you can perform the two methods of troubleshooting, check if the problem is resolved.
Method 1:
Run (Checksur.exe) system update readiness tool.
To do this, follow these steps:
1. download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations. For more information about how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base:
http://support.Microsoft.com/default.aspx/KB/947821
2. try to install the updates again.
Methods 2.
Reset the Windows Update components.
1. to reset the Windows Update components automatically, click the fix button in the link below.
http://support.Microsoft.com/kb/971058
2. click run in the file download dialog box and follow the steps described in the fix it Wizard.I also suggest you to install the latest version of Windows Installer 4.5.
Follow the link below to download:
http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en
and you can also try to install after you turn off the firewall.
It will be useful.
Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum.
-
Try to load software PhoneTree and I continue receiving ADODC error code. What should I do to install the software? How can ADODC error be corrected? I have Windows VISTA
Hello
Thanks for posting your question in the Microsoft Community.
From the description of the problem, you are not able to install a belkin wireless adapter. I'll be happy to help you on this question.
You did changes to the computer before the show?
Method 1: I suggest you to run the fixit from the following link:
Diagnose and solve the program installation and uninstallation problems automatically
http://support.Microsoft.com/mats/Program_Install_and_Uninstall/Method 2: I suggest you perform the clean boot and check if the problem persists.
How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
http://support.Microsoft.com/kb/929135Note: Follow How to reset the computer to start as usual after a clean boot troubleshooting article KB929135 to reset the computer in normal mode.
Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.
-
Fix error code 643
Problems installing KB2539636, KB2533523 and KB2468871. I get the error code 643. Can someone help me? Or point me in the right direction, where I can get help?
Hello
- You are able to install some other updates?
I suggest you follow these methods and check if it helps.
Method 1:
Have you tried to install this manuallyKB? If this isn't the case, you can try it? You can download here (the good language):
KB2539636
http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=27017
KB2533523
http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=27014
KB2468871
http://www.Microsoft.com/download/en/details.aspx?ID=3556
.. .x64 -is for 64-bit Windows Vista
... .x86 - East of 32-bit Windows Vista
How to know if Windows vista is 32-bit or 64-bit is here:
Method 2
I suggest to run the fixit from the following link and try the steps.
You receive the error 0 x 80070643, error code 0 x 643 or updates may be offered again when you try to install the .NET Framework updates when you use Windows Update or Microsoft Updates
http://support.Microsoft.com/kb/976982See also:
Problems with installing updates
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
-
Original title: error code 88982F04
Received this error code when trying to install win 10. the message was ' ' has no 1 update "and"windows update has encountered an unknown error." I have win 7 Home premium SP1 running on a desktop HP Pavilion p7-1210 PC. Can someone please help with an answer.
Thank you
Delete C:\$WINDOWS.~BT
Open the C:\ drive, and then delete the folder: C:\$WINDOWS.~BT and then restart your computer, and then try to upgrade again.
If the upgrade of Windows 10 Assistant becomes blocked or unresponsive to different percentages: 0%, 32%, 62%, 87%, 99%, please wait at least 4 to 7 hours. If the installation program does not progress, close the wizard and restart your computer. Follow the instructions to upgrade manually by using the tool of creation of media or file ISO for Windows 10.
If you find it difficult to do some of the steps below, please see instructions how do their:
If you encounter an error about enough space to perform the upgrade, see the instructions:
How to install Windows 10 on devices with limited space
Task of pre-required
When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1
- How to: 10 tips before installing Windows 10
- How to: 10 things to do if the Windows 10 install fails.
Retry the upgrade manually:
Option 1: Using the media creation tool
Download the media creation tool
Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.
Note: How to check if you are downloaded or installed the update Windows 10 November
Select upgrade this PC now and then click Next
Option 2: upgrade using the file ISO for Windows 10.
Task of pre-required
When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1
- How to back up and restore your files manually
- How to free up disk space in Windows
- How to: 10 tips before installing Windows 10
then
- How to download official Windows 10 ISO files
- How to: upgrade previous versions of Windows using the file ISO for Windows 10
then
- Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
- Reboot several times, and then try again.
- Disable the general USB peripherals (for example - smart card reader). You can do so from the Device Manager.
- If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
- Support your default BIOS reset BIOS.
- Check if there BIOS updates available for your system, and then to apply them.
- If you are using a SCSI drive, make sure you have the drivers available for your storage on a USB device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
- Perform a clean boot, restart, and then try again.
- If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
- If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
- If this does not work, try using the. ISO file to upgrade if possible.
- If you are connected to a domain, go to a local account.
-
I have Lightroom 6.2.1 I tried updating to 6.3 in the past and receive an error code: U44M2P28 and explains the update cannot be completed. When I start Lightroom and select help > updates, I get the message that I have the latest version of the software. I want to update to 6.4, but cannot. What should I do next?
Hi Bud314,
Please visit the links described:
Can't get Lightroom 6.0 to 6.2.1 on a Mac.
Directly download Lightroom 6.4: keeping up-to-date for Lightroom
-
I get this error code 80070020 when trying to update the KB3035132
* Original title: HELP
I get this error code 80070020 when trying to update the KB3035132, I did all the suggestions and get the same thing.
What to do from here
http://Windows.Microsoft.com/en-AU/Windows/Windows-Update-Error-80070020#1TC=Windows-Vista
If you receive Error 80070020 Windows Update, this could mean a program running on your computer is interfering with Windows Update. It is often a simple synchronization problem, and it can be solved by restarting your computer and then run Windows Update again.
See also: http://support2.microsoft.com/kb/883825 -
I can't install the updates of Windows on Vista. Error code is that 80246008-Windows Update encountered an unknown error. Help had two suggestions being to check to see if the Background Intelligent Transfer Service is running, and I don't have the service installed, it is the problem. What should I do?
Hi Nita,
Thanks for posting your question in the Microsoft Community forums.
The description of the problem, I see that you are unable to install Windows Update and receive the error code 80246008. I also see that the PIECES is not in services.
I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.
The 80246008 error code may occur if the (BITS) Background Intelligent Transfer Service is not started or is configured incorrectly.
I suggest you try the procedure described in the article and see if it helps.
Error message when you search for available updates on the Windows Update Web site or on the Microsoft Update Web site: "0 x 80246008.
http://support.Microsoft.com/kb/956706Let us know the status of the issue after you perform the troubleshooting steps. If you need to get assistance or information about this problem with Windows Update, I'll be happy to help you. We, at tender Microsoft to excellence.
-
Get the error code 641, cannot install Windows updates.
Reluctant to do a reinstall of windows. I had the same problem, find the same useless information on a cure. I did a reinstall of windows (Vista) and partially by installing the updates of windows I ran into the same problem again, the windows installer does not. Even from scratch will get not anywhere, leaving you at least your system as it stands leaves can be used instead of a partially updated with no program system.
I wonder if Apple has this kind of problem?Hello
I suggest to reset the Windows Update components and check if it helps.
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows XP
http://support.Microsoft.com/kb/322756
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058/en-us
Let us know if it helps.
-
Get the 8024401c error code when you try to update.
Get the 8024401c error code when you try to update. Tried various fixes - neither works. The message also says that I have installed no update, i.e. no history of update that is false. Any ideas.
ConcerningOriginal title: run Windows 8Solved the problem. Changed the configuration of updates of ' install updates automatically (recommended) to "check and download (do not install). Updates are now being downloaded and my choice to install.
Thanks for your help, Jose Antonio, I learned how to scan my computer now!Regards Gary -
I do not receive an error code for updates failed
original title: update seems to work and indicates successful but when I check some updated why some say failure and why does not receive an error code during the update process?
Whenever I update the installation process says successful but when I went on a lot of my updates to display the details I see "failed." Why is not updating error messages instead of download the update and declaring that it was installed successfully? Why this is happening, seems I can't besure if my updates are actually loaded, even if each notes "installed successfully". I don't want to have to go thro each update to check its status.
Hello
By default, the Windows Update client records all transaction information in the following log file:
%WINDIR%\WindowsUpdate.log
If you receive an error message on the Microsoft Windows Update Web site or automatic
Service updates, you can use the information in the Windowsupdate.log file to resolve the problem.Open the log file and search for the error codes. Post the logs here so that we can check what exactly is causing the problem.
Refer to this article for help:
http://support.Microsoft.com/kb/902093Kind regards
Afzal Taher
Microsoft technical support engineer -
Hi guys Icant open my Facebook I receive this error code (this Web site has been blocked for you) or (error code: ssl_error_no_cypher_overlap)
Hi Dhivyaraj,
Thanks for choosing Microsoft Community.
I see that you get an error message "this Web site has been blocked for you" or "error code: ssl_error_no_cypher_overlap' while accessing the Facebook. .
It would be useful, if you answer this question:
Did you do changes on the computer before the show?
I suggest you follow the provided methods to solve the problem of face book:
Method 1: Clear the SSL State.
a. Click Start and type run in the search bar...
b. in the prompt to run it, type inetcpl.cpl and press to enter.
(c) in the properties of Internet window, click on the content tab.
d. click Clear SSL State.Method 2: Try optimize Internet Explorer and check to see if it helps, here is the link:
http://support.Microsoft.com/kb/936213/ro
Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.
Note: if the problem persists, you can contact facebook support.
http://www.Facebook.com/help/community
If you need help with the Windows operating system, just tell me and we will be happy to help you.
-
When you install windows vista service Park 1, I have received an error code 80073712 with 13% downloaded only?. Can you help me to complete this process?
Hi Gore EzekiahTongun
You can see the steps in the below mentioned article Microsoft and verification.
http://support.Microsoft.com/kb/947366
I hope this helps.
-
My hp DVD-RAM GH60L ATA Device receives an error Code 10. How can I fix it?
My hp DVD-RAM GH60L ATA Device driver receives an error Code 10. (This device can not start..)
I fact troubleshooting, uninstalling, looking for changes, then install (but didn't), I disabled and then enabled... Nothing seems to work.
I checked if my driver needs an update. It is being updated.I use a Windows 7 Home Basic, 32-bit.
Any other ideas on how I could solve this problem? Please and thank you! :-)
This problem occurred after you update or install something?
Have you tried the fixit of base?
http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us
-
I volunteer for installation of the Government in New Orleans. I'm helping recommendations on equipment and software. Their editing computer cannot be connected to the Internet. How to buy and receive the software and updates?
Please see this link in the topic "successful."
Creative cloud using Enterprise | Applications and updates
You can use managed delivery of applications for the following:
- If you need to exercise strict control over the applications installed on client computers.
- If end-users have administrator privileges on the computer.
- To reduce Internet bandwidth consumption by preventing multiple downloads of self-service.
- If there is no Internet access on client computers.
Maybe you are looking for
-
How can I remove two of the three search bars - now appear on my screen
When I go to Mozilla firefox, somehow (and I guess I made the mistake). It appears 3 three bars of 'search '... Obviously, I need only one (1)... How can I remove two of the three bars "get"?
-
Is this one?
-
HP color laserjet 2840 printing and copy blank page
Hi all I have hp color laserjet 2840, printing and copy empty, I change the toner and drum but nothing! any idea? Sorry for my bed English Thank you
-
Indicator update Smartphones blackBerry won't go away.
Hi all I've updated 'Quick pull lite' app world yesterday and that went well, but the indicator update does not go far. So I decided to just update my other application requiring an update which has been 'Where' and this update has failed. So I just
-
The logged data is not loaded in the target table in cdc-compatible?
HelloI tried with cdc-simple concept on single table.I had loaded, journaled table (only changed records) inserted in the simple target in cdc table. Its working fine.When I work on cdc-consistent and logged data are not loaded in the target tableFor