I reformatted my vista to xp and can not hear sound which can make

Similar Questions

• the touchpad on my toshiba laptop with windows vista is disable and I don't know who to make it work again

  the touchpad on my toshiba laptop with windows vista is disable, and I don't know who to make it work again.

  Hello

  Toshiba has also map of keys which allow easy adjustment of the TouchPad. See support for Toshiba
  and Forums. The key shortcut for the TouchPad, if they are responsible in the Fn + F9 or see the key card
  So usually loaded at the top of the screen.

  There is also usually a TouchPad control utility that loads in the Notification area next to the clock
  at the bottom right.

  Toshiba support - click Communcate for links to the Forums and Contact Toshiba.
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Toshiba downloads - access your model.
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba forums - good source of info from others who have the same system or similar
  http://laptopforums.Toshiba.com/

  Check with the manufacturer of system support, documentation in line, or forums as there probably
  are shortcut keys that enable and disable the touchpad functions.

  Also check the control - Mouse - touchpad settings panel.

  You can also try this:

  Panel of configuration manager devices - mouse and pointing devices - Double click on the touch pad-
  The driver tab - click on Update Driver (which is may not make anything like MS is far behind certifying)
  (drivers), now right CLICK on the touchpad and UNINSTALL.

  Then go to the USB and UNINSTALL ALL controllers except the category itself (all in).
  RESET

  This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad
  of work.

  Here is the similar procedure in XP, Vista is the same, except that we need to clear the specific
  device if present.
  http://support.Microsoft.com/kb/310575

  Then go to the website of the manufacturer of system (Toshiba downloads - access your model - listed above)
  and get the latest touchpad drivers.

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Someone at - it a disk / software Adobe CS4 installation file and can make available / sell?

  Someone at - it a disc / Adobe Photoshop CS4 Setup file and will make available or sell? I bought a license for the group in 2009, I have the serial number and certificate but unfortunately I lost the cd. Now, I have to re - install the application. Adobe does not support this version any longer and does not download or CD of CS4. Could you help me?

  You can download the software from this website of the 3rd party

  http://prodesigntools.com/download-Adobe-CS4-and-CS3-free-trials-here.html

  FOLLOW THE INSTRUCTIONS CAREFULLY

• I use windows Vista premium edition and can't get the table to storyboard / timeline screen appears

  I try inserting the narration in my movie maker project, please notify. the timeline or storyboard screens do not appear.

  Hello

  I suggest you to see the links and check.

  Work with projects in Windows Movie Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/work-with-projects-in-Windows-Movie-Maker

  Getting started with Windows Movie Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/getting-started-with-Windows-Movie-Maker

  Publish a movie in Windows Movie Maker http://windows.microsoft.com/en-us/windows-vista/Publish-a-movie-in-Windows-Movie-Maker

• My XP Pro has changed its look and will not play sound.

  My computer suddenly wanted a validation because of hardware changes, he said. Now it looks like widows 98 and none of my devices work and the Device Manager has no entry and I can't reinstall the drivers for sound, Ethernet or exploit, the disk controllers. Anyone know what can happen... I run XP pro. Could it have been caused by my pc repair service... Registry Mechanic.

  Hi TonyYeyo,
   
  PC Repair tool (Registry Mechanic) who you're talking about is a third-party tool. Therefore, Microsoft cannot make any guarantees about the quality, safety or the ability of a third-party software. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.
   
   
  Make sure that you do not have download these cleaning software that may pose a risk to your computer.
   
  -What exactly happens when you try to install the drivers for your computer?
   
  Try to complete the restore of the system on your computer to return to an earlier point when this problem did not exist.
   

  System Restore can return your files system to a point in time before you noticed a problem, without affecting documents, photos, or other personal files. If the system restore does not resolve the problem, you can undo the restore operation and choose a different restore point.

  How to restore Windows XP to a previous state

  Additional reference on:

  System Restore Windows XP is easy to use

• Can not hear sounds to websites

  When I installed the latest version of Adobe Flash Player on my computer, I lost the ability to hear the sounds to websites.  (I use Vista and IE9).  I posted a message to the Adobe help site and received a response on June 14 Chris Campbell who said Adobe was aware of the problem and working on corrective actions.  I heard nothing from Adobe since then and wonder what is happening.  Meanwhile, the problem on my computer continues.  Help, please!

  Your last update (11.3.300.265) solved my problem.  I'm now receive sounds on internet sites.  Thanks for your help.

• Firefox remember my hotmail username and does not have a box to make it to work in Internet Explorer

  Very frustrating. FF started acting a few days previously. He started by showing my user id in hotmail. The next time I checked the mail, (I didn't shut down the computer) it was empty. I filled in and then my password. When I turned off the computer and tried the next day. He asked if I wanted to remember my name, sign in. I said, Yes. After that, FF never remember my user name and has never provided a box to do this. I had not changed anything in FF since download 5.o several weeks ago.
  It works fine in IE. I find no answer anywhere that offers a solution. I even uninstalled 5.o and reinstalled. It still does not work.

  On all browsers-hotmail problem - they changed their security - go here-> http://windowslivehelp.com/thread.aspx?threadid=514780f4-dbdc-4633-adc7-d0e368e8cff6

• Can not hear sound after you install Internet Explorer 9

  Original title: loss of sound

  I'm trying to get my sound on my PC-, he disappeared after the installation of IE 9. Its still does not not after having started with IE 8. All my drivers audio etc seem to work when I click on the test button. Someone at - it other advice?

  The two links below come from the Auto Center of FixIt Solution from Microsoft. Click on the URL, and then click the run now button.

  Diagnose and automatically fix problems reading audio http://support.microsoft.com/mats/AudioPlayback/

  Diagnose and automatically repair the problems of sound recording
  http://support.Microsoft.com/mats/AudioRecording/

  I hope this helps.

  Marilyn

• Can not hear sounds but the speakers work fine...?

  Help! My computer will not play music through my speakers. The small speaker on the bottom of the screen is 'x' ed out and when I click it, it says the "audio device is disabled ', I plugged the speakers to another computer to make sure that they work, I checked and rechecked the cords. I hear its static coming out of them, but no music or 'computer' sounds... someone able to help me? THX!

  Try the difficulty it utility: http://support.microsoft.com/fixit/

  J W Stuart: http://www.pagestart.com

• Can't hear sound

  Recently, I bought apple sports watch. I have it synced with my iphone 6splus. But I can not hear sounds when I get TEXT messages or call on either my iPhone or Apple Watch. Please let me know how to solve. Thank you.

  Hello

  Check your settings:

  • On your iPhone, in the application of the watch, go to: Watch My > sounds & Haptics:
    • Make sure that the Volume of alert is to the Center or right;
    • Ensure that Silent Mode is not enabled;
    • Check that the haptic strength is set to the middle or right of the cursor.
  • On your iPhone, in the application of the watch, go to: Watch My > Messages:
    • Perhaps choose Custom and check - under alerts - which show alerts, sounds and Haptic each are enabled.
  • On your iPhone, in the application of the watch, go to: Watch My > phone:
    • Perhaps choose 'custom' and verify that all desired changes options are enabled, including Haptic and sound under the title of the ringtone.
  • On your watch:
    • When displaying the hour, make slide up on the dial of the watch, drag left/right to the gaze of settings > check that do not disturb is not activated (the button with the icon of the Moon).

• BlackBerry smartphones can not hear anything

  I tried to make a call today and could not hear a tone, and when the call was answered did not hear the receiver.  Receiver me called back and I heard ringing, but once again nothing when I answered the phone.  I investigated and found that if I put in speakerphone mode, I hear, but when the speaker all is silent.  Any ideas?

  Hi thejcb

  If your device did not pass the test include the loudspeaker in the handset or ear speaker while it's a hardware problem you should consult your service provider who can solve this problem. So please consult your service provider.

  Good luck.

• My desktop icons have gone white and do not work as shortcuts

  The desktop icons have gone white and do not work as shortcuts. Make a right click on the desktop does nothing.

  The desktop icons have gone white and do not work as shortcuts. Make a right click on the desktop does nothing.

  Try to rebuild your icon cache. It may be damaged.

  http://www.Vistax64.com/tutorials/117229-icon-cache-rebuild.html

  In addition, you might want to see if there is corruption in some of your system files.

  Use this tutorial to make the verification of the file system. He will try to fix it if it is found.

  http://www.Vistax64.com/tutorials/66978-system-files-SFC-command.html

• Elements of Contact Sheet II 14 shows a program error and does not open

  PSE 14 poster program to the file/Contact error card II and does not open.  How to make it work properly?

  If you go to

  (user) Library\Preferences\Adobe\Plugins\Adobe Board Contact II PSE12\Elements

  and remove the

  Adobe Board Contact PSE12 Pref.

  If all goes well, you should be able to use the plugin Contact Sheet II again.

  To view your library, the user in the menu go to the Finder press the Option key, then you should see library listed in the menu to reach.

• After getting my laptop reformatted, Windows Vista says it must be enabled. Can I use my current product key?

  original title: help with windows vista please!

  I recently got my laptop reformatted. the guy who must have to fix my computer installed a trial instead of my vista under license. Can I still use my previous vista and its product key for my laptop? Help!

  Hello

  your product key/license of vista is up to you to use your laptop for the life of your laptop

  How to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Screen won't turn on and can run Vista in safe mode on Satellite P series

  Last night, I was working on a slide show with windows movie maker in Vista. I had trouble getting the software to recognize my video files for my camcorder, so I suggested that I try to download codec so that he could play my files... I don't know what I was doing, but he gave a shot.

  Even if the codec didn't work even after the download, I was still able to run my computer normally. This morning I woke up and continued to work on my slide show but my computer wouldn't play my slideshow. All he would do was play music and audio files... Everything seems to be working so I decided to restart it.

  My computer will restart, but now my screen is black. It remains 'functions' I see change different colors of black and gray because it is set to zero... and I can hear all the audio that comes with reset, but I can't get my laptop screen to work.

  I plugged my desktop monitor to my laptop to see if the monitor would work like that and it did for about 30 seconds, then turned off Black too. I then rebooted and press F8 and ran in safe mode with my always-connected desktop monitor. I am able to run in safe mode but not normally reboot. I think I downloaded some viruses with this codec.

  I decided to get the desktop monitor and press F8 just hoping the screen would show up on my laptop... but it still doesn't work. It stays black.

  Now, I'm running in network mode so I can know what to do next. I tried a restore of the system in safe mode, but I think that it only deleted windows updates and not something else. I can't find my toshiba recovery CD because we moved a month ago and it's somewhere in a box...

  So here I am. I work constantly on a slide show for Christmas and can't play or it end before my laptop works again. I also tried a during restart System Restore but I don't know my password of administrator and I tried a couple that I thought that I would have used during installation, but they were not good and so now he me off to run as administrator.

  Can someone tell me what I can do? Thank you very much

  I'm a newbie here, but have you tried...

  1. press F8 (press on and hold, or press repeatedly) while Vista boots, and then select Safe Mode. This should automatically open the account administrator (no password needed) and you can then reset your existing account to the administrator.

  2. simply delete all user accounts permits (including the one you are logged as) without forgetting to let the disabled administrator account. And then disconnect.

  3. use Offline NT Password & Registry Editor to unlock the administrator account or promote another user to the local Administrators group to regain access to your locked Windows Vista PC.

  4. also Vista has a hidden superuser account.

  Just my 2 cents.

  Post edited by: Mddlrthr2