I reinstalled acrobat and now it does not start, just breath down and goes?

Similar Questions

• Open my laptop, now it does not start

  Hi everyone, the first time poster.

  I opened my laptop (touchsmart tm2 1070ca) to attempt to clean the keyboard and now it does not start at the top.  all the LEDs light up, but the caps lock LED flashes.  The fans and hard drive look about 2 seconds before silence, and about 10 seconds later, the laptop beeps loud and then stops.

  When I opened upward, the touchpad is detached from the motherboard. I finally get it reconnected, but it turned out to be very difficult.

  I tried the Bios recovery suggested on the support site, but it had no effect.

  any help would be massively appreciated.  no no not my laptop will really make my life difficult.

  I know this is an old thread but since there was no solution, I felt should display what has worked for me, in case someone else has this problem.

  This morning my computer refuses to start and the caps lock blinked. I've read elsewhere that a user of a model different from simply removed HP sound CD ROM and re-inserted. My laptop is a HP tm2 Tablet PC, so it doesn't have a removable CD ROM, but I was wondering if another device had become "loose". First, I removed the dongle USB for my mouse and battery and then restarted. That did not help so I forced a stop down (press the power switch.) Then, I opened the background panels and reinstall the RAM (actually happened two sticks to make sure) and removed and re-inserted the HD then restarted again. I don't know which of these factors did the trick, but it worked.

  Hope someone finds this useful info.

  G.

• Windows wars Napoleon Cossacks 8. I install the game install the patch but it does not start, just flashing screen and that's it. has tried everything what is possible. D what can I do to read. ?

  I install the game install the patch but it does not start, just flashing screen and that's it. has tried everything what is possible. D what can I do to read. ?

  Wednesday, April 15, 2015, 17:56:29 + 0000, PhilipMallard wrote:

  I bought a Windows 8.1 today and wish I hadn't! It's a pain to use (I had a Windows 7 previously). None of my games of Cossacks work on windows 8.1 either and I've tried them in compatibility mode. Is it possible to install Windows 7 on my new computer and replace the disastrous 8.1 version?

  I would like to point out something that you may not realize: Windows 8
  has two interfaces; the modern/Metro Interface (which may be all the)
  you have looked at) and the traditional desktop Interface. You can use
  one or both. This traditional desktop Interface is almost
  identical to the interface of Windows 7. the biggest difference is that
  There is no Orb start clicking to bring up the start menu.

  But note that you can get the ORB start by using one of the many
  third-party programs, are free or very cheap (the classic interface
  http://classicshell.sourceforge.NET/ and debut8 to
  http://www.stardock.com/products/start8/; my personal preference is
  Debut8, but they are both very good).  And goes from an interface to
  the other is very easy; There are several ways, but simply by pressing
  the Windows key is perhaps the easiest.

  Just install one of these two and using the traditional desktop computer
  interface may be a better choice for you than going to Windows 7.
  I use Windows 8, almost exclusively with traditional workstations
  the interface and with 8 Start installed. If you were to look at and use
  my computer, you may have a hard time realizing that it is not
  Windows 7.
  I also recommend to read "how to make Windows 8 or 8.1 watch and.
  Want Windows 7 "to http://www.howtogeek.com/elk/298/45121/4206
  I can't address the issue with your games, except to say that
  whenever you move to a new version of the operating system, some of
  which is used to run on the former does not work on the new. And it's
  much more likely with utilities and games with companies
  applications.

• Adding 2nd NIC (pci express gigabit) to DC7700p. Now, it does not start.

  Adding 2nd NIC (pci express gigabit) to DC7700p.  Now, it does not start. Can not pass boot F9 or F10 Setup Menu. Or the boot or installation menu is accessible.  Any ideas?

  Hello:

  The PCIe slot on a dc7700 usable only for a PCIe video card. If you want or need to add an additional NETWORK card, you need to add a PCI NIC.

  Paul

• HP ENVY 15-uo11dx: did a reset and now it does not start

  I did a reset system where I chose to erase all mt files and apps. Now, he ends up with the spinning thing and does not start. I can get info from the bios with the F2 key and updated and then restored to the bios and nothing.

  Well I thought about it myself by pressing the F11 key several times and following the menu there. Thanks to this HP online

• I put norton on my pc and now it does not start

  I put norton on my pc and when I start the pc, the sign of the window appears but the pc does not start then. I think I have more than a secruity of the internet on the pc. I was told to start in safe mode and remove all of the programs, I have, but still have the same problem. Can anyone help please.

  Since then, you can start safe mode, run a restore of the system to a point just before the installation of Norton if possible.

• Satellite 1400-103 does not start (just blinking led DC)

  When I led plugin the AC DC adapter goes orange and starts flashing (code: 3 flashes - pause - 3 flashes flashes - pause - 2) and the laptop does not start.

  I tried several different batteries with no result. Can someone tell me what exactly is the code above?

  Hi Paul,.

  These sequences are used by repair technicians to help diagnose the problem. Unfortunately, there is no generally available documentation describing, so you will have to refer to an authorised Service Agent to get your problem diagnosed or repaired.

  Sorry

• I reinstalled Deamweaver and now it does not start

  Hello

  I had to reinstall Dreamweaver and I did.

  
  

  But now, there is an incorrect entry point problem.

  How to fix this?

  Thank you

  Serge
  

  Entry point errors mean your system does not meet the requirements, or a system DLL is missing. Since you seem to have had this job before, be sure to install all the updates and also ensure that the MSVC 2008/2009/2010 Microsoft runtimes are installed correctly. Install the manualyl, if necessary.

  Mylenium

• Windows Vista crashed and now it does not start. How can I repair this installation of Vista without reinstalling everything?

  Have Dell 3000 demison he lost a boot file and goes to DOSS wanting to erase the c drive and install vista. Have a vista from microsoft. This tip on other pc

  original title: had a total crash

  Hello E.B.Ballard,

  If you do not have a DVD of Microsoft Vista, download and make you a disc of Vista startup repair or restore the system from this link:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use this disc:

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

• I downloaded an update and restarted my computer, received the blue screen of death shortly after the computer restarts. Now it does not start

  I don't know when the downloaded update, the computer has been restarted on September 10, 2010 to install updates. Shortlyl once the computer is restarted, I got the blue screen of death.  with the details of error like:

  Stop 0 x 000000050 (0 x 000000000000000, 0xFFFFF88001DCAE4, 0xFFFFF8A00B490027, 0 x 00000000000002) do not know if the number of zeros is exactly right in one of those, but it's super frustrating.

  I tried to restart my computer in repair as recommended (get blue screen of death), I tried to reboot normally, loop just restart procedures asking if I want to restart in repair mode.  I tried SafeMode (BSOD), I tried to restart with last working restart (restart loops), I tried to choose the "Computer repair" BSOD I tried a diagnosis and all past.

  Help!

  Thank you.

  So yes actually hear nothing helped me.  Seems that, given that the computer is not stopped correctly and my hard drive was not recognized there starting the cycle upward or give me the BSOD.  Put it in my Ubuntu CD spare which I've had since my last PC hard drive became corrupt and force back across my hard drive.  After doing this, I was able to do a boot repair, who led for the BSOD.  Not sure how that actually fixed, lost about 10 hours of my day.  So I guess I can chalk up to Microsoft and a reminder on why I should buy Mac for now on... an update shouldn't really cause such problems.

  I get that not everyone has the same PC, so it is difficult to tell if an update is bad, but he should not do this and if an update is the cause of a certain segment of consumers who are updating must be taken down for everyone, or at least the users with the configuration that is known to have problems with an update.

  Problem is solved, had to go back to a previous version of good boot where I have not install updates again.  Now, I'm trying to understand who was was bad, so I can leave my computer knows to ignore.

  Nice day.

  Just in case someone needs to know how to use Ubuntu to back up files on their PC that does not load windows, please see the link below:

  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer/

• My hard drive crashed, I have reinstalled Windows, but now, it does not update, get error 0 x 80240036

  I GET MESSAGE FOLLOWING [Error number: 0 x 80240036] The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. For self-help options: Frequently asked Questions Find Solutions Windows Update Newsgroup To support options: Microsoft online assisted support (no cost for Windows Update issues)

  [Error number: 0 x 80240036] The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. For self-help options: Frequently asked Questions Find Solutions Windows Update Newsgroup To support options: Microsoft online assisted support (no cost for Windows Update issues)

  When you have done the clean install, what Service Pack level are you up to? In other words, you have installed SP2 and SP3?

  What version of IE are you using?

  All your drivers are up to date?

  Have you installed a firewall / anti-virus before you connect to internet software and if so, which?

  Maybe you could give some information on your system so that maybe someone can help more or maybe read this:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/cannot-download-any-Windows-updates-get-error/fb94ba4e-6b2e-4053-8706-bb1148201110

  Also:

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  Note SP1a does not exist so if you are at the level of the RTM, go straight to SP2 and SP3.

  FYI

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  Installation of XP SP2 - http://support.microsoft.com/xpsp2getinstall

• interrupted vistas system restore and now it does not start at the top. The only way I can access advanced boot options is by pressing F8

  Then I tried to start Windows normally or in Mode safe and it does not work.

  None of these advanced startup options work effectively.

  When I turn on the laptop, the VAIO large appears and then Microsoft corporation and then a quick start of blue, then it tries to restart again again and again until I hit F8.

  I hope this can be repaired.  Thanks in advance for anyones help.

  Hello

  as none of the advanced startup options does work, try this:

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• Installed Defender pro 15-1 software anti-virus and now Windows does not start.

  Original title: can't get to start-up computor!

  I have a Toshiba laptop that won't not start when turned on. I have a windows vista 32 bit operating system. I recently purchased Defender pro 15-1 the anti-virus software and installed on the pc. After installation I tried to restart the pc, it would not pull up windows and it flashes just microsoft icon. I have tried F12 to restart to set the default values always nothing. What can I do to my pc?

  Hello

  Here's what I use and recommend: (these are all free and very effective versions.)

  Avast and Prevx proved extremely reliable and compatible with all I have
  launched on them. Microsoft Security Essentials and Prevx have also proven to be very
  reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.

  Avast Home free - stop any shields is not necessary except leaving Standard, Web, and
  Operation of the network.

  Prevx - Home - free

  Windows Firewall

  Windows Defender (is not necessary if you use MSE)

  Protected IE - mode

  IE 8 - SmartScreen filter WE (IE 7 phishing filter)

  I also IE always start with asset if filter InPrivate IE 8.
  (It may temporarily turn off with the little icon to the left of the + bottom
  right of IE)

  Two versions of Avast are available 6.x and 4.8 x

  Avast - home - free - 6.x stop shields you do not use (except files, Web, network, &)
  Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
  Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
  Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
  disabled - click OK
  http://www.avast.com/free-antivirus-download

  Avast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
  and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
  Finish those you don't use).
  http://www.avast.com/free-antivirus-download#TAB4

  Or use Microsoft Security Essentials - free
  http://www.Microsoft.com/Security_Essentials/

  Prevx works well alongside MSE or Avast

  Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
  or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Also get Malwarebytes - free - use as scanner only. If you ever think malware and that
  would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
  (not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
  never find anything of note that I started to use this configuration.

  http://www.Malwarebytes.org/

  I hope this helps.

• Adobe Acrobat Reader for Android does not start

  Hello!

  Recently, I have a problem with Adobe Acrobat Reader in my 5.1 Android device and I want to solve it.

  I moved to a Google Nexus 4 (where the application was working fine) to a Lenovo ZUK Z1, where I have the problem. Now, I can't start the application, because it seems that the application does not load... I enclose a photo.

  However if I open a file from a file Adobe Acrobat Reader load browser very well and with the file.

  Do you know how can I solve this problem? I tried to remove App data, uninstall and reinstall... All this without success

  Thank you very much!

  

  I tried several times and did not work that way. Also combine with uninstalling and reinstalling Google game store.

  Finally, I solved download apk directly from your Web site, then the app started. I've updated Google play store and continues to function well.

  If this problem is solved, and I'll never know where the problem was.

• Update of Firefox does not, so I re-installed. Now firefox does not start at all?

  Yes firefox, I started one morning, and I saw that it has been updated. After waiting, the notification saying "firefox is updated" crashed so I had to shut it down. When I started firefox again, he stated that the update failed, but less than a second after that notification skipped upward, it crashed also. He continued doing this, so I followed some instructions on the internet, re-installed firefox (without deleting the data of a personal nature), but now, firefox won't start at all!

  Now what?

  Unfortunately, I never submitted before incident reports, so the folder does not exist in my computer

  But the good news is that I tried running in windows safe mode, and it worked, then after returning to normal windows, it did not work. After waiting a while, now it works again, so I guess this can be considered resolved now