Satellite 1400-103 does not start (just blinking led DC)

Similar Questions

• Satellite L40 - 15G - does not start, only power LED lights

  Hello.

  I have a Satellite L40 - 15G that will not start. I click the power button, or with the battery, and only the power led alternately. I can open and close the cd/dvd, but nothing else works. No beeps when I remove the memory, the hard drive led blinks even. I tried with another hard drive, and it's the same thing.

  Could this be the motherboard, the processor?

  Appreciate the help!

  Hello

  Unfortunately, it looks like a hardware malfunction. I guess that it s related to the motherboard or perhaps CPU, if you have already tried another memory module.

  You should go to an authorized service provider. Guys have good diagnostic tools to check your laptop and repair. In addition, they can order spare parts Toshiba.

  Sorry, but everything that s what I can say. Here he only a user to s forum

• Satellite P200-143 does not start

  My Satellite P200-143 does not start. The led lights up and the drive light flashes once then nothing. Holding the buttome 'on' for 10 second light outside.

  I tried to take out the battery for the afternoon, but no effect

  Any suggestions?

  P

  It looks like a dead last.
  The P200 is a new series and I think that the guarantee is valid. Then contact the ASP in your country and ask for help.

  Good luck

• Satellite C650 - Windows does not start correctly

  I have a Satellite C650, who does not start, when it lights there are two options, Startup Repair launch which leads to a black screen and mobile arrow, the screen remains like that until you turn it off the button stop (seriously ive left for about 10 hours). The other option is to start windows normally resulting in a blue screen and the laptop restarts itself.

  Help me please, make things worse I can't find the box that it came in which contains the guarantee and recovery disc

  Hey Buddy,

  You can start your laptop in safe mode? This means that if you press the F8 key before Windows starts and you choose Safe mode can you start Windows?

  If this isn't the case I think that it s something wrong with your Windows installation and that's why you need to use the Toshiba Recovery disk to restore to factory settings.

• Satellite A200-1BJ does not start

  Hello

  My Satellite A200-1BJ does not start. After turning on the button it starts only for 1 or 2 seconds (flashing light, work from HDD, fan work, display blank) and then it turns off automatically. Once it happened days before but I didn't have the time to solve it and over the next few days, he has not occurred. Now, I tried to launch it more than 20 times and it still won't start.

  I tried only with full battery and also only with the power adapter. I removed the HDD, RAM, keyboard, DVD, speakers, display and a few other connector under the keyboard and it still does not start and it shuts down after 1-2 seconds each time.

  In recent months he sometimes exploded due to overheating during work so I cleaned the dust inside.

  No problem with the motherboard or power?

  Thanks for help.

  Hmmm... on this virtual path, it is not easy to say what the problem is. described behavior is the same as in cases when the BIOS is dead after failed BIOS update installation.

  Of course, it's mainboard problem but what exactly, it is not easy to say. For me, this looks like faulty BIOS.

  Have you installed any updates or anything that may be responsible for this?

• Why Satellite Pro A300 does not start when you press the power button?

  Suddenly my new Satellite Pro A300 does not start correctly when you press the power button. The situation is the following: when I press the power button is displayed the opening of Toshiba (Leading Innovation) and the disappers image quickly. Then there is a black screen for about 30 seconds. There is a rectangular frame with the text Microsoft Corporation under. And nothing happens however long wait.

  In order to get with the trial starting I then shut down the computer by pressing the power button until the computer turns off. ("The hard way to close")
  Now, I press the power button shortly to turn on the computer. Then, the computer starts normally with the photo to open Toshiba and after a few seconds, I wonder to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.

  What should I do to get a normal departure procedure?

  When the laptop starts normally (after choosing normal mode) stop your laptop properly using START > shut down option. Next launch should be normal.

  When the OS is moving towards the low irregularly will always ask you how to start this new (secure or normal mode).
  The same thing happen on my Satellite A300.

• Windows wars Napoleon Cossacks 8. I install the game install the patch but it does not start, just flashing screen and that's it. has tried everything what is possible. D what can I do to read. ?

  I install the game install the patch but it does not start, just flashing screen and that's it. has tried everything what is possible. D what can I do to read. ?

  Wednesday, April 15, 2015, 17:56:29 + 0000, PhilipMallard wrote:

  I bought a Windows 8.1 today and wish I hadn't! It's a pain to use (I had a Windows 7 previously). None of my games of Cossacks work on windows 8.1 either and I've tried them in compatibility mode. Is it possible to install Windows 7 on my new computer and replace the disastrous 8.1 version?

  I would like to point out something that you may not realize: Windows 8
  has two interfaces; the modern/Metro Interface (which may be all the)
  you have looked at) and the traditional desktop Interface. You can use
  one or both. This traditional desktop Interface is almost
  identical to the interface of Windows 7. the biggest difference is that
  There is no Orb start clicking to bring up the start menu.

  But note that you can get the ORB start by using one of the many
  third-party programs, are free or very cheap (the classic interface
  http://classicshell.sourceforge.NET/ and debut8 to
  http://www.stardock.com/products/start8/; my personal preference is
  Debut8, but they are both very good).  And goes from an interface to
  the other is very easy; There are several ways, but simply by pressing
  the Windows key is perhaps the easiest.

  Just install one of these two and using the traditional desktop computer
  interface may be a better choice for you than going to Windows 7.
  I use Windows 8, almost exclusively with traditional workstations
  the interface and with 8 Start installed. If you were to look at and use
  my computer, you may have a hard time realizing that it is not
  Windows 7.
  I also recommend to read "how to make Windows 8 or 8.1 watch and.
  Want Windows 7 "to http://www.howtogeek.com/elk/298/45121/4206
  I can't address the issue with your games, except to say that
  whenever you move to a new version of the operating system, some of
  which is used to run on the former does not work on the new. And it's
  much more likely with utilities and games with companies
  applications.

• Satellite C660-2EL does not start

  Hi guys,.

  After a few days full of frustration here I am.

  I am working on a friends Satellite C660-2EL
  He was stuck in the endless loop of boot Win 7 and would not be recovered by any means.

  So I decided a format was the way to go.
  After the format using partition magic everything's fine.
  I reinstalled Win 7 and the installation was also fine. Once the installation is complete, and it's a reboot that I decided to jump into the BIOS and change the order of boot if I put the CD Drive first. If after changing the settings and then save and quit this crap won't start at all now, no CD HD or anything else.

  The toshiba screen flashes upward, but when I hit F2 now it freezes just tell to get into Setup.
  When I try to hit F12 the screen goes back to the blinking cursor.
  If I press anything I get the white screen with the cursor.

  I saw a video on you tube to reset the CMOS, I tried it work with no luck.

  Any ideas guys?

  Hello

  You want to say you have a cursor blinking in the upper left corner and the unit does not start CD or HARD drive?
  The blinking cursor is above all a sign of failure of the HARD drive.

  I recommend that you check the HARD drive with the help of a tool (freeware) called Drive Fitness Test.
  This tool creates a bootable disk that scans the HARD drive for malfunctions.

  If the HARD drive's fault, it be replaced

• Satellite L40-139 does not start

  ? 19/02/2014 18:41 - edited? 19/02/2014-18:45

  Hello, I have a problem with the SATELLITE L40-139

  the thing is when I press the power button / stop, hard drive led will begin to Flash, CD-ROM led is lit and the screen is black. I noticed that advise in the CD-ROM makes a sound ICT in the same way the hdd led flashes (when it flashes I hear a tick form CD, yes I unfolded any computer laptop).

  I can only say that I have connected my PC HARD drive and it's working., good fan is not working too, but I think it will start, after some time (as he always did)

  Notebook crash circumstances are now saying: that a year ago, he fell from 1 inch (such height ;]) I saw that the ribbon cable connecting the touchpad to the mohterboard was broken and my diidn can't start computer, I thought that there's a problem, but I forgot and left the laptop for more than 9 months (with hard disassebled and battery and cd-rom drive) and then I decided to try to turn it on.
  And viola! It works it boots etc.

  After a month of being happy, I'm drunk I couldn't sit on the Chair and I decided to sleep with my laptop on the bed, I lied right down and put the laptop on my belly and it crashed (screen freezes) so I decided to reboot, but it does not start.

  Here is a video with what I get when turning the power on it: [http://www.youtube.com/watch?v=jC0pGBBVwJk] (not Fortunately my phone fell in the mud and shifts when I record videos)

  Some people suggest I should connect an external display to see if theres no picture but the result is always the same. (Screen not even fuels not on)

  Maybe someone could help me fix without sending it to the customer service.

  See you soon.

  On this virtual path, it is not easy to say what the problem is here. Of course, you can try to do some tests and try to make some conclusions which may be wrong. After his last stop somewhere I think that there is big problem with graphics card. Of course I can't say it for sure.

  Diagnosis just exact mainboard can offer answers. I m afraid mainboard is dead and must be exchanged.

• Satellite L670-1EE does not start after upgrading RAM 4 GB to 8 GB

  I'm trying to upgrade the RAM from 4 GB to 8 GB. If I replace two 2 GB of 2 modules of 4 GB modules, the BIOS (which is the most recent) realize the 8 GB, but does not start at startup. There is just the white cursor blinking not.

  When I put in the 1 4 GB module and 1 2 GB module the system starts without a problem and has 6 GB. I checked the two 4 GB modules, they work in any combination, but not when both are installed together.

  I couldn't find any rider or the settings of the bios for the RAM...

  Any idea?

  Thanks in advance for the help

  The last plausible explanation is that both modules are ok, but not compatible with each other.
  The laptop can be upgraded up to 8 GB of RAM. This should not be a problem since the unit is supported by the Chipset Mobile Intel HM55 Express.

  So I think that you need to replace the modules Kingston modules are great and work without problem.

• Re: Satellite A100-011 does not start, a black screen at the beginning

  I have a Toshiba Satellite A100-011, which is almost 5-6 years. It suddenly started to behave abnormal.

  First of all, I started to get a 1-2 sec black screen when he was running. The screen was on and off occasionally.

  After a few days, I could not started upward from my windows xp sp3 operating system. I tried to start in safe mode with networking to see if I had a few spy, virus or something. I ran avast, hijact, ad-aware and some more, but not found anything.

  Later, I tried to format my laptop with a xp professional, but this time I can't see any reflection that passes more fun running and a black screen. I just got a black screen at the beginning and it does not start.

  I plugged on a television screen, and here I have started. I have re-installed all the drivers and formatted, but all I get is a black screen on my laptop at the beginning.

  What should I do now? Do you think I have a problem with my screen of HW or a driver problem with nvidia geforce go 7600? Maybe I'm missing something?

  Thanks in advance for all replies.

  If you can see the picture on the TV there are a few s laptop display problem. Y at - it some problem connection or display itself.

  You want to fix it yourself? You can disassemble the laptop?
  I mean if you have any experience with this kind of things that you should seek professional help.

• Satellite A205-S5804 does not start.

  My computer does not start Satellite A205-S5804.
  It does not work in safe mode, and it will not work with the system restore.

  It stays black with a cursor, if anything.

  How to on my computer?

  Hello

  You have a cursor blinking in the upper left corner?
  In this case, you should check the disk HARD has been recognized by the BIOS.

  If the HARD drive is listed in the BIOS then I would recommend checking the HARD drive using s drive fitness test:
  http://www.HitachiGST.com/HDD/support/download.htm

  To run the test of fitness of s by car, you must download the appropriate creator or image and create a support of auto-start.

  Check it!

• Satellite L300D - 12L does not start from CD/DVD drive

  Hello.

  I noticed a couple of threads on L3x who sometimes won't start but have a blinking cursor.
  I also have this problem with my daughter satellite.

  It occurs when there is a disc in the DVD player. The PC does not start, I get a black screen with a cursor and the DVD flashes regularly as if she is trying to determine if there is a bootable disc inserted.

  I tried several discs with similar results.
  Everything that happens the DVDRW ejects, and I have to force a shutdown, then eject the disc immediately when I start her for it boot on Vista.

  Any ideas greatly appreciated.

  Hello

  Have you tried to boot from the recovery disk Toshiba?

  Fact is if you try to install the Windows operating system on the new laptop series, you must install either the drivers SATA or you must set compatible SATA to AHCI mode in the BIOS!

  That's why check first before you would contact any ASP guy to replace the STRANGE.

  See you soon

• Satellite M840-A764 does not start

  Hi all

  My laptop does not start, there is no power in the laptop.
  I removed the better and the charger and press and hold the power button for 1-2 minutes, but nothing happened
  So, it would be very cool if you guys find for me the solution.

  Thanks for reading. \
  Best regards, Yazeed.

  Hello

  You see the Toshiba splash screen?
  Y at - we indicators?

  In the best case, just a small part could be faulty as adapter or module memory maybe but in the worst case the related problem of the motherboard.

  Guarantee is valid?

• Toshiba Satellite L70 - B does not start the BIOS or OS

  Hello

  I changed the same parameters (UEFI priority CSM to start: FIRST USB) in the Bios and saved them, now computer laptop does not start, I can't enter BIOS more... Just see a black screen... I tried to remove the pulp and power, clicked on the power 1 m button, but nothing has changed...

  I can fix this please

  Laptop model: Toshiba L-70-B

  Any help please?