I replaced the HDD with SSD but Win 7 has always said that the HARD drive is inplace!

Everything else works fine. Error correction of the control panel says there is an error, but it did not fix it. 'Computer' shows still a 75 G HARD drive but the CPU is using my Samsung SSD 250 G 820. How can I change the C: drive in "Computer" to read my new SSD?

Before any thing let double check that you're not missreading disk management, disconnect your external drive and all other devices, re-booting, it starts?

If it isn't

Disconect all the external devices

(1) if its a dvd win7 real victory dvd insert & re-booting, it starts from the dvd victory, early in the process if it detects remove them all partitions, then continue the installation using all the free space.

Then connect to the internet and allow windows updates important to do its thing, it may require several reboots and update runs.

Install your anti virus program, if a PC brand visit the site PC manufacturers and install drivers specific to win7 for your model, if a generic desktop computer, motherboard manufacturers site for their drivers.

Check the basic operation of the PC before going any further, if all OK just reinstall your media origonal programs.

If still OK connect the external drive and simply copies the data in different places of the library on the ssd.

---------------------

(2) if it is a game of manufacturers PC recovery discs insert the cd & re - start, depending on what options that don't give CD a destructive restore (clean install)

After completion do not install anything, unless you use a disc of recovery of PC manufacturers and theres a separate utilities/drivers If yes drive use.

Then in management records check which is shown for drive 0 if it shows the space unallocated to the rt, C C: rt-click and select Extend Volume > type following in the unallocated total shown Mo > next > finish

Then connect to internet for the important updates to do its thing, then proceed as indicated in (1) except for the drivers

Tags: Windows

Similar Questions

  • Is it possible to replace the hard drive with an SSD? or would it be too expensive?

    Is it possible to replace the hard drive with an SSD?

    or would it be too expensive?

    Yes.  There are several alternatives.  I found a way relatively inexpensive, using a map of mSATA (very small SSD) and an adapter to connect it to the connector IDE 44 pin internal of my PowerBook.  It works very well.  Rather than repeat what I posted previously, you can watch these two topics (which also has good info, other users)

    Re: This win to install a SSD drive in a PowerBook G4?

    Re: SSDS  (my post is halfway - "this is how I did with my trusty Pismo...) »)

    FYI - I have used the adapter is even cheaper now

    https://www.Amazon.com/GP/product/B009BA8V4M

  • How to replace the hard drive with an SSD on a model of end 2011 MacBook Pro 15 inch, A1286

    Hello

    I would like to replace the hard drive on my model of end 2011 MacBook Pro 15 inch, A1286 with a disk solid state drive (SSD). First of all, I would like to know if this is possible. Second, what is the best way to do it? I'm under the Yosemite OS if that makes a difference.

    Here are some technical details of my current system:

    -MacBook Pro 15 inch, late 2011 model A1286

    -OS yosemite

    -16 GB of memory/RAM

    -Currently using stock HD

    All instructions step by step would be helpful with what software should I use to make backups of my current operating system (e.g., SuperDuper). I would also like to know what tools or material I need like type of screwdriver, cables to transfer data to the SSD, etc.. My goal is to not have to reinstall each app one by one on the SSD, but if that's the only way to do it then it's okay.

    Thanks in advance for any help.

    You can see instructions OWC here. Tools are mentioned in the discussion (I used a plastic knife picnic with the stronger edge somewhat blunt for nylon pry tool). I suggest you invest in one of these external fences. Install the SSD in who and clone internally externally with CarbonCopyCloner or SuperDuper. Then move the external drive of the internal drive after the start of the SSD in the external to confirm the operation.

  • Replace the hard drive of 500 GB with 256GB SSD in spectrum XT Touchsmart

    I tried to replace the HARD drive of 500 GB with 256 GB Samsung SSD and then began to install it using the external DVD drive, but during installation without disk hard were found. What I have to disable certain BIOS settings or I need to install the SSD in a separate location. Any kind of help is greatly appreciated.

    Yupp, I could install an SSD. You need to install the drivers for RAID Intel® Rapid Storage Technology (Intel® RST) driver (https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=2101&DwnldID=22194&ProductFamily=Software+Products&ProductLine=Chipset+Software&ProductProduct=Intel%C2%AE+Rapid+Storage+Technology+ (Intel % C2% AE + RST) & lang = fre) during the installation of Windows 8. I extracted the drivers for USB and everything by choosing which device to install windows 8 installed drivers.

    After that, the SSD has been detected and the simple installation procedure. I pasted the link for the driver, don't know whether or not it will get removed. In case it is removed just search driver RAID Intel® Rapid Storage Technology (Intel® RST).

  • ThinkPad Edge S430 - is possible to replace the hard drive with an ssd?

    Hey, Lenovo,.

    I bought a Thinkpad Edge S430 and wonder if it is possible to replace the hard drive with an ssd?

    Kind regards

    Mikael


  • Re: Tecra A9 - 11M - replace the HARD drive with a larger

    I have a Tecra A9 - 11 M with Windows XP Professional installed. I would like to replace the hard drive with a larger drive and install Windows 7 Professional.

    Any suggestions on recommended records say 500 MB?

    Difficulties to install Windows 7 on this model?

    Hey,.

    > Any suggestions on recommended records say 500 MB?
    I assume you mean 500 GB and not 500MB, right? ;)

    Well, the Tecra A9 already supports SATA interface and there is no limit of capacity on SATA interface, so you can install a 500 GB HARD drive or more (750 GB, etc.). Just make sure that it s 2.5 SATA HDD.

    You can choose each brand of HARD drive because each model will not work. You can buy a Toshiba HDD, Western Digital HARD drive or another. No problem ;)

  • Qosmio X 500 - 10W - can I replace the HARD drive with another?

    Hello

    I have a Qosmio X 500 - 10W with two drive HARD Toshiba MK5055GSX 500 GB 5400 RPM 8 MB? SATA II but is one of the hs so I'm wondering if I can be replaced by a more powerful style, drive HARD 750 GB 7200 RPM / min 16 MB Toshiba courses?

    Thank you

    Hey,.

    Your question is a bit hard to understand, but I think you want to replace the HARD drive with another (faster) model, right?

    Well, that s no problem. 7200 RPM hard drives works, they are a little stronger, but they're faster so if you need more performance without problem.
    750 GB or more are also no problem because the SATA interface is not the limited capacity. Theoretically 1 TB or more should also work.

    Anyway, you can buy the 750Go you mentioned that it will work. :)
    ?

  • To replace the hard drive on my MacBook Pro, I disable Photoshop 6, and I believe that I have disabled my Photoshop 5.5 (adobe Creative Suite 5.5 Design Standard). I could through the Adobe Web site to download and install Photoshop 6; but the Adobe Cre

    To replace the hard drive on my MacBook Pro, I disable Photoshop 6, and I believe that I have disabled my Photoshop 5.5 (Adobe Creative Suite 5.5 Design Standard). Supposedly if you turn into a sequel they will disable all. I could, through the Adobe Web site to download and install Photoshop 6; but the Adobe Creative Suite 5.5 Design Standard is not put at my disposal for download. Any suggestions?

    Joseph, here is the link to Download CS5.5 products

    Let us know if you need help with it.

    Atul_Saini

  • Hello, hp laptop laptop touch ac157cl 15 energy star replaced the hard drive, but do enter the bios password!

    Hello, hp laptop laptop touch ac157cl 15 energy star replaced the hard drive, but do enter the bios password! Help, please!

    Thank you!

    Hello

    Enter 45581394

    Kind regards

    DP - K

  • 2000-2d01SV HP: replace the hard drive in slim 7mm with 9.5 mm

    Can someone tell me if I can replace the hard drive from HGST thin 7mm supplied with my notebook HP 2000 - 2d01SV with a new 9.5 mm one?

    Note to the reader in this laptop is held in by a rubber drive support and not mounting screws.

    Thanks in advance.

    Dimitri

    Hello

    Yes, your laptop supports 6.35 cm (2.5 in.) 9.5 mm hard disks (. 37-in) and 7.0 mm (. 28 - in.) thick. A piece of rubber is 7mm thick.

    More information:

    http://h10032.www1.HP.com/CTG/manual/c03763129.PDF

    Kind regards.

  • How can I reinstall windows after replacing the hard drive? Laptop did not come with a disc.

    My internal hard drive went bad in my laptop, easy to replace and relatively inexpensive. However, the laptop came not with the windows disk. So, how can I reinstall windows once I replaced the hard drive?

    Basically, you have two choices. You can communicate with the person who made the computer and see if they can provide either a set of Windows Vista restore disks (I would assume) or an installation for Windows Vista (probably OEM) DVD. If the second choice, determine if you will need to download device drivers or software packages from their web site. OR, you can purchase the operating system of your choice, retail. The wisdom is that, if this is your choice, you see if you will need the device drivers and get those of the web site of the manufacturer.

    Once you have the disks, install in the usual way.

    Tom Ferguson

  • I just replaced the hard drive in my PC with my arrival of the damaged disc. I'm wondering now "activate Windows now".

    I just replaced the hard drive in my PC with my arrival of the damaged disc. I'm wondering now "activate Windows now". The code on the computer case was partly carried away and I do not have a record of it. The software has been activated once already. Suggestions, please.

    original title: hard drive swap.

    Use a magnifying glass and a strong light and see if you can retrieve the key.  It is not registered anywhere except on the label.  They are applied at the factory in batches, and there is no record that the key is affixed to a specific computer.  Recover what you can and then try to activate by phone.

    To activate Windows Vista by phone, follow these steps: click Start, and then click computer.  Click System Properties on the toolbar, and then click click here to activate Windows now in the Windows activation area.

    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.  The Windows of Activation Wizard starts.  Click use the telephone system automated in the Windows Wizard of Activation.

  • Replaced the HARD drive, but can not reinstall the operating system

    Evening,

    I replaced the HARD drive on my laptop and used the sony recovery media kit, but the error message "can not configure windows to run on this hardware of computers.

    The HARD drive is a Toshiba of the same style and size. Sony sent me two sets of disks, I replaced the HARD drive twice still have exactly the same problem.

    Any ideas before using it as a target would be useful.

    Thank you

    C

    It is possible that the new hard drive, you bought are 4 k sectors and not 512 KB, which is necessary to make it work properly.  If you have a practical clean Windows installation disc that give a try and see if you encounter the same error...

  • Problems with folder permissions after replacing the hard drive

    Hello

    Recently, I replaced the hard drive on my mac.  Already before the replacement, I got the files that I had locked.  Now I'm unable to open the file.  I get the error "the folder 'nom_de_dossier' can not be opened because you don't have permission to see its content".  I looked at the permissions for the folder and everything he says is fetch.  I ran a command in the Terminal and for one of the records in question, that's what I see-

    drwxr-x - 13 501 501 442 5 July 2013 MG

    Any help would be greatly appreciated!

    Running OS X El Capitan

    10.11.4 version

    Try this first:

    Start the mac all holding the SHIFT key, it is slow, connection, and then select Restart from the Apple menu.

    When this does not help:

    Reset password utility in the recovery Partition:

    1. Restart your computer from the recovery partition.
    2. Open disk utility and run a repair permissions on your boot volume (in ElCapitan click the first aid tab). Once this completed, close disk utility. We do this for good measure.
    3. Open a Terminal from the Utilities menu. Type in resetpassword and select your user (NOT administrator system/root) account in the menu drop-down.
    4. Click on the Reset button at the bottom of the window ACL section and Reset the folder permissions.
    5. Exit the utility password and return to the main recovery menu.
    6. On your keyboard, press + Q and restart your computer. It is very important that you don't hold down the power button to exit the recovery session, or the ACL Reset to occur.
  • Replacing the HARD drive

    My laptop is model: HP G62 - 361TX NB PC all THE... My HARD drive I thnk not working not properly... I'll replace it... ghoulish u help me is this drive is Compatible with my laptop...

    Internal hard drive Hitachi 500 GB portable (Travelstar 5K 1000)

    Portable Device Type 2.5 inch spin speed disk capacity 500 GB drive HARD 5400 RPM Interface SATA 3.0 Gbps Memory Cache 8 MB average latency 5.5 ms average seek time 12 ms (read) reliability 600000 (charge/discharge Cycles)

    OR

    WD 1 TB computer internal laptop hard drive (WD10JPVT/WD10JPVX)

    DRIVE CONFIGURATION Handheld Device Type 2.5 inch HDD Drive capacity 1 TB Spin speed 5400 RPM Interface SATA 3.0 Gbps Cache Memory 8 MB transfer rate 150 MB/s data transfer rate (shared with host) 3072 MB / s Non-recoverable Read Error 1 per 10 ^ 14 reliability 600000 (charge/discharge Cycles)

    OR

    Solid State Drive Hybrid 7 mm thickness portable Seagate internal hard drive 500 GB (ST500LM000)

    DISK CONFIGURATION Handheld Device Type disk drive HARD Interface SATA 6.0 GB/s 500 GB capacity

    Please help me with this...

    One of them will work, but of the three, you want the Seagate hybrid car. It will be faster, even if more expensive.

    Here is your Service Manual:

    Manual

    Replacing the hard drive begins on page 4-8.

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

Maybe you are looking for

  • I have the most recent edition of the Flash Player and it works fine with IE, but Firefox always tells me that I can play things because I have

    Since I updated Firefox I can't play anything that requires Flash player. I have the reader up-to-date and it works perfectly with IE, but Firefox always tells me that I need another plugin and when I followed the instructions, it says "failed downlo

  • Satellite L500 LCD replacement screen (PSLJ0A - 01 K 013)

    Hello I need to replace the LCD for my Satellite L500 PSLJ0A - 01 K 013, but I have trouble finding a LCD 15.6 "appropriate. I am trying to find online, but it seems that the Web sites that sell screens LCD do not have my laptop model. It will be the

  • Cisco Aironet 1140 Standalone AP

    Greetings. For some time I'm looking for bargains from a class wireless access point. I narrowed down it to the stand-alone Cisco Aironet 1140 (no controller). I'm no stranger to Cisco products. I worked with the routers, switches and firewalls Pix /

  • Regexp_substr help

    StringWaiting-Msg_erreur - process started with the parameters - Source schema:-MyPersonalSchema, target schema:-SandBoxTarget, Mode:-the TWO restart Id:-1453BOTHIn above the string column grid I have string and I expect TWO to extract the string.So

  • CS3 cannot be reactivated after re installation

    CS3 Design Standard does not work after you reinstall on my laptop.  My original email address was a college e-mail and it is no longer used as I forgot my password used as activation.  I have all other information including serial numbers and the sa