Area of regulation 1142N

Similar Questions

• Area of regulation for LAP 1142 and LAP 1260

  Dear all,

  I need help to choose the right part of the two TURN code access point in the object.

  Both the TOWER will be installed in the North Africa Morocco.

  Could you help me pls?

  Best regards

  Igor.

  Morocco does not have a country code in the WLC and google isn't helping discover.

  You can:

  -Adjust your WLC toward a neighboring country such as Algeria (DZ) and order APs 1142-E and 1260-E (EI means field, europe ETSI and its surroundings). But then, you take the responsibility to know what is allowed or not to the Morocco in terms of wifi. Cisco is not responsible to violate you any law

  -You find with local wireless this regulation is applied.

  Kind regards

  Nicolas

• Area of regulation hurt

  I've got a few 1142n -E- k9 on ebay, but should have obtained 1142n -N- k9...

  Thought I checked it first, but the Australian site, I went to that sold the bad ones too! @###

  so it will not register with my controller 4402.

  I have 2 options, I guess that:

  1 / the WLC for a country code that corresponds to the E version? (USA)?

  2 / the 1142n to change to different regulatory field. Is this possible?

  Thank you

  E is for europe mainly so choose any European country :-)

  U.S. East-a (America)

• I need the raw ADC output card PCI-4462 using DAQmx

  I need the raw ADC output card PCI-4462 using DAQmx

  Is it possible or are only regulated units availible.

  Ken Manatt

  [email protected]

  There is a version of 'Raw' DAQmx Read (see image).  This is probably what you are looking for.

  -Alan

  

• Cisco AIR-LAP1041N-E-K9 does not not with WLC 4402 version 7.0.116.0

  Hi all

  appreciate your support for a problem I started to deal with today. I have a Cisco WLC 4402 running the 7.0.116.0 version and it's great to work with 25 Cisco 1252 access points. We received a new 20 Cisco 1041N APs today and I installed one in our site, but it does not work. He well worked and loaded the flash image and obtained WLC ip through DHCP option address and began to show the below error:

  * 00:00:10.021 Mar 1: % SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: crypto IOS FIPS self-test passed

  * 00:00:10.033 Mar 1: * CRASH_LOG = YES

  * 00:00:10.333 Mar 1: 1 Port is not presentSecurity base.

  MAC Ethernet address of base: C8:9 C: 1 D: 53:57:5E

  * 00:00:11.373 Mar 1: % SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: crypto RADIO FIPS self-test passed on Dot11Radio interface 0

  * 00:00:11.465 Mar 1: % LWAPP-3-CLIENTEVENTLOG: reading and initialized AP event log (contains, 1088 messages)

  * 00:00:11.494 Mar 1: State of the voice_diag_test of WLC is false

  * 00:00:12.526 Mar 1: % LINK-3-UPDOWN: Interface GigabitEthernet0, changed State to

  * 00:00:13.594 Mar 1: % LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed State to

  * 00:00:13.647 Mar 1: % SYS-5-RESTART: System restarted.

  Cisco IOS software, software C1040 (C1140-K9W8-M), Version 12.4 (23 c) JA2, VERSION of the SOFTWARE (fc3)

  Technical support: http://www.cisco.com/techsupport

  Copyright (c) 1986-2011 by Cisco Systems, Inc.

  Updated Thursday, April 13, 11 12:50 by prod_rel_team

  * 00:00:13.647 Mar 1: % SNMP-5-start COLD: SNMP agent on host APc89c.1d53.575e knows a cold start

  * 00:08:59.062 Mar 1: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY

  * 1 Mar 00:08:59.062: bsnInitRcbSlot: slot 1 has NO radio

  * 00:08:59.138 Mar 1: % LINK-5-CHANGED: Interface Dot11Radio0, changed State to reset

  * 00:08:59.837 Mar 1: % SSH-5-ACTIVATED: SSH 2.0 has been activated

  * 00:09:00.145 Mar 1: % LINEPROTO-5-UPDOWN: Line protocol on the Interface Dot11Radio0, state change downstairs

  * 00:09:09.136 Mar 1: % ADDRESS_ASSIGN-6-DHCP: Interface GigabitEthernet0 assigned address DHCP 172.16.26.81, mask 255.255.255.0, hostname APc89c.1d53.575e

  * 00:09:17.912 Mar 1: % PARSER-4-BADCFG: unexpected end of the configuration file.

  * 00:09:17.912 Mar 1: State of the voice_diag_test of WLC is false

  * 00:09:17.984 Mar 1: message logging LWAPP to 255.255.255.255.

  * 00:09:19.865 Mar 1: % CDP_PD-4-POWER_OK: full power - supply NEGOTIATED online

  * 00:09:19.886 Mar 1: % LINK-3-UPDOWN: Interface Dot11Radio0, changed State to

  * 00:09:20.873 Mar 1: % LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed State to

  * 00:09:20.874 Mar 1: % SYS-6-LOGGINGHOST_STARTSTOP: logging to host started 255.255.255.255 - initiated CLI

  Translate "CISCO-CAPWAP - CONTROLLER.atheertele.com"... the domain server (172.16.40.240)

  * 00:09:29.029 Mar 1: % CAPWAP-5-DHCP_OPTION_43: the 172.16.100.102 drive address obtained by DHCP

  * 08:27:02.000 may 25: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.16.100.101 peer_port: 5246

  * 08:27:02.001 may 25: % CAPWAP-5-CHANGED: CAPWAP changed State to

  * 08:27:03.175 may 25: % CAPWAP-5-DTLSREQSUCC: DTLS connection created successfully peer_ip: 172.16.100.101 peer_port: 5246

  * 08:27:03.177 may 25: % CAPWAP-5-SENDJOIN: send request to join 172.16.100.101

  * 08:27:03.177 may 25: % CAPWAP-5-CHANGED: CAPWAP changed State to ADHERE

  * 08:27:03.329 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state CFG

  * 08:27:03.333 may 25: % DTLS-5-ALERT: WARNING received: close notify alert from 172.16.100.101

  * 25 May 08:27:03.333: % PEER_DISCONNECT-5-DTLS: Peer 172.16.100.101 has closed the connection.

  * 08:27:03.333 may 25: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 172.16.100.101:5246

  * 08:27:03.378 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY

  * 08:27:03.378 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY

  * 25 May 08:27:03.378: bsnInitRcbSlot: slot 1 has NO radio

  * 25 May 08:27:03.448: State of the voice_diag_test of WLC is false

  * 08:27:14.000 may 25: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.16.100.101 peer_port: 5246

  * 08:27:14.001 may 25: % CAPWAP-5-CHANGED: CAPWAP changed State to

  * 08:27:15.185 may 25: % CAPWAP-5-DTLSREQSUCC: DTLS connection created successfully peer_ip: 172.16.100.101 peer_port: 5246

  * 08:27:15.186 may 25: % CAPWAP-5-SENDJOIN: send request to join 172.16.100.101

  * 08:27:15.186 may 25: % CAPWAP-5-CHANGED: CAPWAP changed State to ADHERE

  * 08:27:15.330 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state CFG

  * 08:27:15.333 may 25: % DTLS-5-ALERT: WARNING received: close notify alert from 172.16.100.101

  * 25 May 08:27:15.334: % PEER_DISCONNECT-5-DTLS: Peer 172.16.100.101 has closed the connection.

  * 08:27:15.334 may 25: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 172.16.100.101:5246

  * 08:27:15.379 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY

  * 08:27:15.379 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY

  * 25 May 08:27:15.379: bsnInitRcbSlot: slot 1 has NO radio

  * 25 May 08:27:15.450: State of the voice_diag_test of WLC is false

  * 08:27:26.000 may 25: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.16.100.101 peer_port: 5246

  * 08:27:26.001 may 25: % CAPWAP-5-CHANGED: CAPWAP changed State to

  * 08:27:27.182 may 25: % CAPWAP-5-DTLSREQSUCC: DTLS connection created successfully peer_ip: 172.16.100.101 peer_port: 5246

  * 08:27:27.183 may 25: % CAPWAP-5-SENDJOIN: send request to join 172.16.100.101

  * 08:27:27.184 may 25: % CAPWAP-5-CHANGED: CAPWAP changed State to ADHERE

  * 08:27:27.329 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state CFG

  * 08:27:27.333 may 25: % DTLS-5-ALERT: WARNING received: close notify alert from 172.16.100.101

  * 25 May 08:27:27.333: % PEER_DISCONNECT-5-DTLS: Peer 172.16.100.101 has closed the connection.

  * 08:27:27.333 may 25: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 172.16.100.101:5246

  * 08:27:27.377 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY

  * 08:27:27.377 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY

  * 25 May 08:27:27.377: bsnInitRcbSlot: slot 1 has NO radio

  * 08:27:27.433 may 25: % LINK-5-CHANGED: Interface Dot11Radio0, changed state down administratively

  * 08:27:27.446 may 25: % PARSER-4-BADCFG: unexpected end of the configuration file.

  * 25 May 08:27:27.447: State of the voice_diag_test of WLC is false

  * 08:27:27.448 may 25: % LINK-3-UPDOWN: Interface Dot11Radio0, changed State to

  * 08:27:27.456 may 25: % LINK-5-CHANGED: Interface Dot11Radio0, changed State to reset

  * 08:27:38.000 may 25: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.16.100.101 peer_port: 5246

  * 08:27:38.001 may 25: % CAPWAP-5-CHANGED: CAPWAP changed State to

  * 08:27:39.183 may 25: % CAPWAP-5-DTLSREQSUCC: DTLS connection created successfully peer_ip: 172.16.100.101 peer_port: 5246

  * 08:27:39.184 may 25: % CAPWAP-5-SENDJOIN: send request to join 172.16.100.101

  * 08:27:39.184 may 25: % CAPWAP-5-CHANGED: CAPWAP changed State to ADHERE

  * 08:27:39.326 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state CFG

  * 08:27:39.329 may 25: % DTLS-5-ALERT: WARNING received: close notify alert from 172.16.100.101

  * 25 May 08:27:39.329: % PEER_DISCONNECT-5-DTLS: Peer 172.16.100.101 has closed the connection.

  * 08:27:39.330 may 25: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 172.16.100.101:5246

  * 08:27:39.375 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY

  * 08:27:39.375 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY

  * 25 May 08:27:39.375: bsnInitRcbSlot: slot 1 has NO radio

  * 25 May 08:27:39.446: State of the voice_diag_test of WLC is false

  * 08:27:49.000 may 25: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.16.100.101 peer_port: 5246

  * 08:27:49.001 may 25: % CAPWAP-5-CHANGED: CAPWAP changed State to

  * 08:27:50.179 may 25: % CAPWAP-5-DTLSREQSUCC: DTLS connection created successfully peer_ip: 172.16.100.101 peer_port: 5246

  * 08:27:50.180 may 25: % CAPWAP-5-SENDJOIN: send request to join 172.16.100.101

  * 08:27:50.180 may 25: % CAPWAP-5-CHANGED: CAPWAP changed State to ADHERE

  * 08:27:50.323 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state CFG

  * 08:27:50.326 may 25: % DTLS-5-ALERT: WARNING received: close notify alert from 172.16.100.101

  * 25 May 08:27:50.326: % PEER_DISCONNECT-5-DTLS: Peer 172.16.100.101 has closed the connection.

  * 08:27:50.326 may 25: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 172.16.100.101:5246

  * 08:27:50.370 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY

  * 08:27:50.370 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY

  * 25 May 08:27:50.370: bsnInitRcbSlot: slot 1 has NO radio

  * 08:27:50.425 may 25: % LINK-5-CHANGED: Interface Dot11Radio0, changed state down administratively

  * 08:27:50.438 may 25: % PARSER-4-BADCFG: unexpected end of the configuration file.

  I searched the difference in regulatory areas between AIR-LAP1041N -E- K9 and AIR-LAP1041N -A- K9 and no difference was found which may affect the operation of this access point.
  to cite our WLC configuration for regulatory areas is:
  Country set AR codes

   

  Area of regulation 802. 11A:-A

  802.11bg:-a

  My question is should I just include my country in the WLC (IQ) add the field of requlatry (-E) to solve this problem? or change the country will affect the operation of all APs workers?

  Appreciate your kind support,

  Patrick Q.

  Try adding a European country to your regulatory domain.

• Change the credit card on Pay Pal payment option: not so fast!

  I have been informed by cat care client Adobe tonight that if you are currently subscribed creative cloud you can not change your payment option credit card with Pay Pal without cancel your subscription and get a new one.  Can someone please explain to me why I have to jump through hoops to Adobe for an option which should be a simple change in their payment system?

  PayPal is a third party making the payment on the account of the customer, the credit card payment is directly through the Bank.

  The payment system are strictly regulated in virtue of planned policies & guidelines. It cannot be changed.

  Care credit may be changed.

  Concerning

  Stéphane

• Protection and confidentiality of customer data

  Nice day

  Don't know if it's the right place, but the summer to research on the web without a clear answer.

  When a company decides to move to the cloud (be vmware hosted or not) what are the regulations regarding customer data stored on a company third.

  How he handles the case if the customer decides not to continue with its data on the business hosting?

  Thanks in advance

  While each cloud provider has different terms and policy around customer security and confidentiality of the data, you can locate the VMware vCloud hybrid and concretely political Service in our terms of Service and privacy policy agreement. Those who can be found here:

  VMware vCloud hybrid Service terms of Service: VMware vCloud hybrid terms of Service of Service | United States

  VMware privacy policy: privacy policy | United States

  The policy, in addition to the above agreement and our Description of Service (link below) also face the scenario at the end of the service to the customer and the customer's data processing.

  Description - VMware vCloud hybrid Service Department: https://www.vmware.com/files/pdf/vchs/vCloud-Hybrid-Service-Service-Description.pdf

  A company may be subject to specific external industry or Government regulations according to the data of the company intends to host. It is the responsibility of the company to ensure compliance with these regulations.

• Not all the photos transferred to revel adobe

  Not all of my uploaded photos Photoshop 8.0 Adobe revel.  My photoshop did not open and now I would like to know how to get the rest of my JPEG photos transferred.  I don't have a Mac is this a problem?  I'm very frustrated by this approach and finds it difficult to get answers to my questions.  Any help would be appreciated.

  Just to clarify, you should know that files are not regulation of elements to Revel, they are copied from Photoshop.com to Revel. If you had all your files in the items synchronized with Photoshop.com, all jpg files should be copied to Revel.  Duplicates are not copied and non - jpg files are not copied. Once the migration is complete, you can no longer add files to Photoshop.com.

  During this period of transition, no files have been copied, moved or deleted from your Organizer items or hard disk; they were just copied Photoshop.com to Revel. This was done as a convenience to the customers so that they did not go to the effort of downloading from the site and download to another because that can be very time consuming.

  You can download files from your hard drive to Revel. Here is a link to help with this:

  DOWNLOAD
  FAQ: How can I add files (upload) of Revel?
  http : / / forums.adobe. com /thread/1162795? TSTART =0

  You need not use a Mac or a tablet or smart phone to use Revel. You can connect a browser to the adoberevel.com.

  Here are some other useful links for you:

  Forum for users of PS.com to Revel:
  forums.Adobe. com /Community/ ps . com _sharing_and_storage

  Forum FAQ:
  forums.Adobe. com /Community/ ps . com _sharing_and_storage / Frequently asked questions

  Forum for users of Revel:
  forums.Adobe. com revel/Community/Revel

  FAQ on the transition of Photoshop.com to Revel:
  http :// www . Photoshop . com membership/misc /- Frequently asked questions

  FAQ on Revel and subscriptions:
  http :// www .Adobe. com /Products/revel / Frequently asked questions .html

  Organizer of items/Revel help:

  http :// helpx .Adobe. com /Elements-Organizer/using/revel.html

  Getting Started with Revel:

  http :// www .Adobe. com /support/revel / laptop.org/gettingstarted /revel_ gs .html

  Guinot

• Distorted image [was: help me again Nancy O]

  Nancy, I want to thank you for the help that you have made my way up to now.  I'm here to ask assistance of another question.

  First of all, the corrections to my last request worked, but I decided to post this info on another page.

  On this new page, I created an image and inserted into DW by replacing the image that was already there.  I did the

  image of the same size is it easy on myself.  The new image looks perfect in PS and DW, but when I publish it, it

  deforms.  You can take a look for me please?

  http://friesenequipment.com/partsspecials.html

  <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
  <html xmlns="http://www.w3.org/1999/xhtml">
  <head>
  <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1" />
  <title>Friesen Equipment Ltd. | Agriculture Commercial Lawn & Grounds Care</title>
  
  <style type="text/css">
  A {text-decoration: none; color:#000000; font: 11px Arial, Helvetica, sans-serif}
  A:hover {color:#008e29}
  .style2 { font-size: 10px;
   font-family: Arial, Helvetica, sans-serif;
   font-weight: bold;
   color: #FFFFFF;
  }
  .style16 {font-family: Arial, Helvetica, sans-serif; font-size: 14px; color: #008E29; }
  .style18 {font-family: Arial, Helvetica, sans-serif; font-size: 14px; color: #008E29; font-weight: bold; }
  </style>
  </head>
  <body>
  <table width="980" height="748" border="0" align="center" cellpadding="0" cellspacing="1" bgcolor="#333333">
    <tr>
      <td height="746" valign="top" bgcolor="#FFFFFF"><table width="980" height="110" border="0" cellpadding="0" cellspacing="0">
        <tr>
          <td><object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=7,0,19,0" width="980" height="110">
            <param name="movie" value="topbar2.swf" />
            <param name="quality" value="high" />
            <embed src="topbar2.swf" quality="high" pluginspage="http://www.macromedia.com/go/getflashplayer" type="application/x-shockwave-flash" width="980" height="110"></embed>
          </object></td>
        </tr>
      </table>
        <table width="980" height="30" border="0" cellpadding="0" cellspacing="0">
          <tr>
            <td height="30" style="background : url(images/navigation.gif); background-repeat : no-repeat;"><table width="980" height="20" border="0" cellpadding="2" cellspacing="0">
              <tr>
                <td width="12"> </td>
                <td width="120"><div align="left"><a href="index.html"><img src="images/home_button.gif" width="54" height="20" border="0" /></a></div></td>
                <td width="836"><table width="800" height="20" border="0" align="right" cellpadding="0" cellspacing="0">
                  <tr>
                    <td><div align="center"><a href="aboutus.html">ABOUT US</a> <img src="images/divider.gif" width="10" height="20" align="absbottom" /> <a href="products.html">PRODUCTS</a><a href="locations.html"></a> <img src="images/divider.gif" width="10" height="20" align="absbottom" /><a href="parts.html"> PARTS</a> <img src="images/divider.gif" width="10" height="20" align="absbottom" /> <a href="sales.html">SALES</a> <img src="images/divider.gif" width="10" height="20" align="absbottom" /> <a href="service.html">SERVICE</a> <img src="images/divider.gif" width="10" height="20" align="absbottom" /> <a href="products.html"></a> <a href="locations.html">LOCATIONS</a> <img src="images/divider.gif" width="10" height="20" align="absbottom" /> <a href="kidszone.html">KIDS
                          ZONE</a> <img src="images/divider.gif" width="10" height="20" align="absbottom" /> <a href="contact.html">CONTACT
                          US</a> </div></td>
                    <td width="160"> </td>
                  </tr>
                </table></td>
              </tr>
            </table></td>
          </tr>
        </table>
        <table width="980" height="606" border="0" cellpadding="0" cellspacing="0">
          <tr>
            <td width="200" height="606" bgcolor="#008E29" valign="top"><table width="200" height="20" border="0" cellpadding="0" cellspacing="0">
              <tr>
                <td width="19"> </td>
                <td width="181"><img src="images/mission.jpg" width="164" height="175" /></td>
              </tr>
            </table>
              <table width="165" height="480" border="0" align="center" cellpadding="0" cellspacing="0">
                <tr>
                  <td width="165"><table width="165" height="1" border="0" align="center" cellpadding="0" cellspacing="0">
                      <tr>
                      <td><p><a href="usedproducts.html"><img src="images/used-equipment-big_button.jpg" width="164" height="29" border="0" /><br />
                      </a><a href="warranties.html"><br />
                              <img src="images/warranties-big_button.jpg" width="164" height="29" border="0" /><br />
                          </a><a href="events.html"><br />
                          <img src="images/events_button.jpg" width="164" height="29" border="0" /><br />
                          </a><a href="fs.html"><br />
                          <img src="images/fs_button.jpg" width="164" height="29" border="0" /><br />
                          </a><a href="cc.html"><br />
                          <img src="images/cc_button.jpg" width="164" height="29" border="0" /><br />
                          </a><a href="jdmerch.html"><br />
                          </a><a href="careers.html"><img src="images/careers_button.jpg" width="164" height="29" border="0" /><br />
                          </a><a href="links.html"><br />
                          <img src="images/links_button.jpg" width="164" height="29" border="0" /></a>                        
                          </p>
                        <p><a href="http://www.thehaymasters.com"><img src="images/haylink.jpg" alt="" border="0"/></a></td>
                      </tr>
                    </table>
                      <br />
                      <br /></td>
                </tr>
            </table></td>
            <td width="780" bgcolor="#FFFFCC" valign="top"><table width="780" border="0" cellspacing="0" cellpadding="0">
              <tr>
                <td width="4"> </td>
                <td width="146"><div align="left"><a href="whatfriesencando.html"></a><a href="orderjdparts.html"></a></div></td>
                <td width="166"><div align="left"><a href="partsspecials.html"></a></div></td>
                <td> </td>
              </tr>
            </table>
              <table width="736" height="962" border="0" align="center" cellpadding="6" cellspacing="6">
                <tr>
                  <td height="2" colspan="2" valign="top" class="style16"><br />
                    PARTS SPECIALS - <br /></td>
                </tr>
                <tr>
                  <td width="592" height="897" valign="top"><div align="left" class="style18">Oil and Filter Sale </div>
                    <p class="style16">Oil and filters 10% off until end of June.<br />
                    Click image for full document in pdf format.</p>
                    <p> </p>
                    <p> </p>
                    <p> </p>
                    <p> </p>
                    <p> </p>
                    <div align="left" class="style18">15% off all John Deere Safes</div>
                    <p class="style16">Hand-applied high-gloss exterior available in three colors:  classic black, deep burgundy, and forest green<br />
                        <br />
                        <strong><em>Stylish</em></strong><br />
    &middot;        Moline, IL John Deere logo<br />
    &middot;        Distinctive three-point drop  handle and lock plated in polished brass<br />
    &middot;        Upholstered, mocha fabric  interior</p>
                    <p align="left" class="style16"><strong><em>Fire protection</em></strong><br />
    &middot;        Certified Fire Protection System  &ndash; 1,200&deg;F, 45-minute fire rating<br />
    &middot;        Three layers of 5/8-in. U.L.  Listed fireboard in ceiling <br />
    &middot;        2 in walls with heat-activated expanding Palusol&reg; door seal<br />
                    </p>
                    <p class="style16"><strong><em>Security</em></strong><br />
    &middot;        U.L. Listed for residential  security<br />
    &middot;        Approximate weight: 780 lb.<br />
    &middot;        Heavy-duty, 12-gauge seamless  steel body<br />
    &middot;        Sargent &amp; Greenleaf&trade;  U.L. Listed (Group II) combo/key lock<br />
    &middot;        Clutch-drive (handle slip)  mechanism<br />
    &middot;        Pre-drilled for bolt-down  security<br />
    &middot;        HiSecurity&trade; composite-steel door  with triple-steel hard plates<br />
    &middot;        EZ-Glide&trade; bolt protectors<br />
    &middot;        Fail-Safe&trade; relocker<br />
    &middot;        Ten (10) 1-in. diameter active-locking bolts</p>
                    <p> </p>
                    <div align="left" class="style18">New Products</div>
                    <p><span class="style16">Several new home and workshop products for you to view</span>.</p>
                    <p></p>
                    <p> </p>
                    <p> </p>
                    <p> </p>
                    <p><br />
                    </p>
                    <div align="left" class="style18"></div>
                  </td>
                  <td valign="top"><p align="center"><a href="pdfs/FALL OIL SALE.pdf" target="_blank"><img src="images/OIL AND FILTER.jpg" width="150" height="193
                  " border="0" /></a><br />
                    <span class="style18">Oil and Filters</span></p>
                    <p align="center"><br />
                      <br />
                    </p>
                    <p align="center"><a href=" http://www.deere.com/media/player/en_us_mediaplayerpopup.html?divisionName=parts&amp;Video=jd_fire__security_safes&amp;r=l"><img src="images/jdsafe.jpg" alt="" width="150" height="193" border="0"
                   /></a><br />
                      <br />
                        <span class="style18">Demonstration Video</span><br />
                    </p>
                    <p align="center"><br />
                      </p>
                    <p align="center" class="style16"> </p>
                  <p align="center" class="style16"> </p>
                  <p align="center" class="style16"> </p>
                  <p align="center" class="style16"> </p>
                  <p align="center" class="style16"><br />
                    </p>
                  <p align="center" class="style16"><br />
                  </p>
                  <p align="center" class="style16"><a href="pdfs/partsspecialsnewproducts.pdf" target="blank"><img src="images/partspecials2008.jpg" alt="" width="150" height="193" border="0"/></a><br />
                    <br />
                    <span class="style18">New Products</span></p>
                  <p align="center" class="style16"> </p>                
                  <p align="center" class="style16"> </p></td>
                </tr>
              </table>
            <p align="center"> </p></td>
          </tr>
      </table></td>
    </tr>
  </table>
  <table width="980" border="0" align="center" cellpadding="0" cellspacing="0">
    <tr>
      <td><div align="right"><font color="#333333" size="1" face="Arial, Helvetica, sans-serif">&copy; 
        2006 Friesen Equipment Ltd.</font></div></td>
    </tr>
  </table><!-- Start of StatCounter Code -->
  <script type="text/javascript" language="javascript">
  var sc_project=2375289; 
  var sc_invisible=1; 
  var sc_partition=22; 
  var sc_security="51db6ba9"; 
  var sc_text=2; 
  </script>
  <script type="text/javascript" language="javascript" src="http://www.statcounter.com/counter/counter.js"></script><noscript><a href="http://www.statcounter.com/" target="_blank"><img  src="http://c23.statcounter.com/counter.php?sc_project=2375289&amp;java=0&amp;security=51db6ba9&amp;invisible=0" alt="javascript hit counter" border="0"></a> </noscript>
  <!-- End of StatCounter Code -->
  </body>
  </html>
  

  [Thread title edited by Moderator: always specify the nature of the question.] Please, don't post questions for individual members. [Everyone is here to help.]

  The dimensions of the image itself and those specified in the web page are not similar and are not regulated in the same way.  The code of the page shows...

  img src = "images/OIL AND FILTER.jpg" alt = "" width = "150" height = "193"

  Have the image being higher than it is wide, which, as you see, is on the page.  But the image itself is much wider than it is tall... maybe you have loaded the wrong picture?  Also, avoid having spaces in the file names used on the web.

  

• SatPro A60 can hardly operate at 2.8 GHz since problem of thermal regulation

  Hey guys, a nightmare for A60, its CPU clock can hardly run at 2800 MHz, it is supposed, since 75 of the A60? Thermal regulation time is too easy to access.

  Using the processor RightMard and Mobilemeter clock utilities, I found the temprature entry A60 to thermal regulation 75? When this temperature is reached, cpu clock slow down up to 1500 MHz (you can't see it using the normal test program, because Throttling is like cheating... that is to say force CPU to stop for some time in order to avoid overheating), and when temperatures rise less than 70?, he will return to 2800 MHz. Another delay: the auto-off temperature is 85? for A60.

  Although the temperature which got the Mobilemeter is the sink, not the CPU core temperature, it seems that oshiba made this 75? Date limit too low (default time of Intel is probably about 90?). In addition, with evil designed sink heater, the temperature remained generally above 70-80? with room temperature 15? and only some word processing or navigation base and also with the machine almost free of dust. All this means that the laptop can hardly run at 2.8 GHz. You could never have this speed in any graphical game.

  The real clock must be test using RightMark clock, it allows to test if the CPU is forced to stop frequently due to thermal regulation. Everyone wants to do this experience can download these two free software of:
  RMC(177Kb):
  http://CPU.RightMark.org/download/rmclock_18_bin.rar
  MobileMeter(40Kb):
  http://www.geocities.co.jp/SiliconValley-Oakland/8259/release/0310/mm0310.zip

  with SuperPI, who can make as high CPU temperature as you want opening it serval times at the same time
  http://ftp15.ENET.com.CN:88/pub/system/sysanaly/SuperPi-8.zip

  Finally, my original idea to write about it here is not only to tell a truth, but also I want that people of Toshiba could do something on this issue, or do an updated bios updated to allow to off the thermal regulation, or make the deadline for her superior to only 75? ,
  as you have about bios satellite 1805 last updated:

  Version 2.10 24/09/2002
  A change has been made to allow only BIOS enable and disable the CPU limitation during the operation of Windows 98SE.

  Give the original CPU speed, because that's the only reason I and a few other people chose this machine.

  Hi Al

  Well, I put t know if you have experience in the technology of the laptop but heat is a known issue on all laptops. It s a fact that all the parts (Cpu, graphics card, etc.) in the unit produce a lot of heat and it s very difficult to cool these rooms because there is no place. You can't compare the computer laptop and desktop PC!

  In addition, to protect against overheating of the CPU has an internal temperature sensor. (You know that) If the temperature of computer s reaches a certain level, the cooling fan is turned on or processing speed is lowered. You can choose to control the temperature of the CPU by the setting of the fan first, then if necessary, reduce the speed of the CPU.
  Alternatively, by lowering the speed of the CPU first, then if necessary, turn the fan. You can use the element of the standard tab cooling method in Toshiba Power Saver.

  Here are the features:
  Maximum performance: Turn on fan first, and then if necessary decreases the speed of the CPU processing.
  Performance: Use a combination of fan and a decline in the processing speed of the CPU.
  Optimized battery: Lowers the speed of the CPU first, then if necessary turns on the fan.

  In addition if the temperature of the CPU reaches an unacceptable level with two parameters, the system stops automatically to avoid any damage.

  Hopefully this description can explain this problem.

  Best regards

• I am very allergic to nickel. Are one of the Apple watches without nickel on areas of the skin?

  Are one of the Apple watches without nickel on areas of the skin?  I am very allergic to nickel but want a watch

  Hi Carrie

  Apple Watch (IE stainless steel models), space grey and Rose Gold aluminum Apple Watch Sport, some Apple Watch band stainless steel parts and magnets in watchmaking and strips contain some nickel (all under the restrictions imposed by European regulations).

  More information:

  Port Apple Watch - Apple Support

• Regulator PID very slow to reach the value Point and zeros process Variable when it should not

  Hello

  I am using a PID controller to regulate the emission of a filament current in an ion gauge, but I'm running into several problems.

  The first and less important, are the controller of PID VI takes at least 5 minutes to get the current where it needs to be.  Is it possible to speed this up?

  The second and more important, are that the PID controller tends to zero the process variable before you start the process of getting the close process of the target value variable.  This can be seen in the attached VI: I write 5.8 volts voltage filament - something I did at the beginning to try to get the controller PID for the process close to the target faster - value variable but when the PID controller starts to do his thing, he kills the tension before anything, rather than rise of 5.8 V.

  The attached VI is a single which has these problems.  VI actual ion gauge controller I've written has the same problems, but in a form even more frustrating.  I have a while loop set up for the filament voltage to where it should be (using a PID controller) first and foremost, then a loop of data acquisition, which also includes a feedback loop in the form of a PID regulator to maintain the filament voltage.  When the second PID controller starts to run, it concentrates the tension that the earlier had set, taking another 5 + minutes to reach the point where we can take data and giving us 5 minutes of false data in the process!

  Does anyone know why PID controllers are behaving like this, and what can I do to fix/work with this behavior?

  Hello

  It seems that PID VI will always be 0 for the first iteration. You can, however, use the advanced PID VI and set up the first iteration in manual mode. After subsequent iterations, you could then define this automatic mode and there will be a transition smoothly. I think this will give you the desired behavior.

  -Zach

• Could not find LM238 regulator of tension in Multisim

  I am new to Multisim.  I can't find a LM238 voltage regulator in the library under sources power supply voltage regulators.  In fact, I did a general search and could not find anywhere.  What is usually done in a case like this?  My intuition tells me that I wouldn't need to redraw my circuit just because I can't find a component in Multisim.

  Thanks in advance.

  Hello

  We don't have a model for the LM238, but we have a model for the LM138. According to this data sheet, the LM138, the LM238 and the LM338 are identical with the exception of the beaches of operating temperatures. You can place a component LM138 to the master database and use it for the simulationand implementation.

  Hope that helps.

• Modbus, writing in the registers by PID regulator

  Hello

  Can you please help... I'm new here

  I try to use a registry read, send the value to a PID vi, then write in a register.

  I've attached an example of using a temperature regulator.

  I get errors whenever I try to connect using clusters, clusters, etc..

  My material and comms are all good, I have values and all gauges reading ok, but it seems I can't work on how to manipulate the data through a vi of PID.

  Your help is very appreciated.

  Thank you

  1 rearrange your functions so that your reading of data occurs before your writing of data.  You can do 1 2 3 4.  Right now your code run step 3 before step 1 and impossible to know where should go steps 2 and 4.

  2. your writing log has an entry called registry where your worth is going.  There is an entrance to U16.  Your PID provides a DBL.  You need to read the manual of the device know how to code the PID output floating point number into an integer.  It may be a simple by multiplying by a factor of scale and he rounded to an integer.

  3. your Modbus Read is for several records. You will get a table 1 d of readings, but it will not be 1 element.  You can use the table to Index, and then together with setpoiint wire to feed in the gauge of multi-aiguille.  Since you data will be an integer U16, you may need to perform a scaling to convert an integer in all that but it represents the temperature.

  

  4. don't forget that you must connect your process in the PID function value.

• MSN account has been blocked, and all valid for get info to reset attempts are not received to my alternate e-mail address

  Hello - I use abrand new account just to register for this problem. My account * address email is removed from the privacy * was blocked - I filled out a form of reset for my alternate e-mail address, but nothing up there. I then retried and and filled out a background form thanks to the regulator blocked to prove my payment options and email of recent information to prove who I am. Still not reset info received to the alternative e-mail address. Today, I tried again and there is no control of the blocked page but my password does not work and I do not have information received to the alternative e-mail address. I understand that you can have some resets sent to mobiles but I can't this configuration. Finally, I asked a password reset today and no still no reception to alt address. Help! You will need to get mail NOW. I pay for this service, but there is no support and I didn't ask for this remove - what number should I call to get this sorted out instantly or, Alternatively, to close the account that I do not pay for a service that does not work... Report as abuse

  This is not an appropriate forum to do so, however...  You want to see what I'm about to post to make sure that you have not missed something...

  You talk directly to Microsoft here.  It is - for the most part - a peer-to-peer forum (those, like you, are simply users of Microsoft products).

  You could go through this article - make sure you have done everything...
  http://www.itechwhiz.com/2011/04/account-recovery-reset-Windows-Live.html

  And someone is probably going to put these links here also:
  Windows Live Solution Center - HotMail - HotMail Forums Solutions
  http://windowslivehelp.com/
  Hotmail - Forums
  http://windowslivehelp.com/forums.aspx?ProductID=1

  Hotmail - Solutions
  http://windowslivehelp.com/solutions.aspx?ProductID=1

  How to contact Windows Live Hotmail Support
  http://email.about.com/od/hotmailtips/Qt/et_hotmail_supp.htm

  Windows Live Hotmail Top issues and Support information
  http://support.Microsoft.com/kb/316659/en-us

  Compromised account - access unauthorized account - how to recover your account
  http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41

  Hotmail hacked? Take these steps
  http://blogs.msdn.com/b/securitytipstalk/archive/2010/07/07/Hotmail-hacked-take-these-steps.aspx