I screwed up and twice on my computer installed Windows 7. Help!

Similar Questions

• I have Windows 7 Ultimate 32 - bit (Home Premium update) and I want to re - install Windows but in 64-bit. Will I still have Ultimate

  I have a Toshiba with Windows 7 Ultimate 32 - bit (Home Premium update) and I want to re - install Windows but in 64-bit. Will I still have Ultimate?

  I'm going to re - install from 32 to 64-bit via the loader of windows recovery.
  This computer has asked ma to install 32 or 64 bit when I first turned on, I chose 32, but now I want to 64.

  It depends on. Is the license of Windows 7 Ultimate, a full version license or upgrade, or upgrade Express?

  If its an Express upgrade license, you will need to reinstall Windows 7 Home Premium 64-bit, then make the Express Windows 7 upgrade Ultimate edition using the Express upgrade key, you have.

  If you have a Windows 7 Ultimate full retail or upgrade version license, you can simply by using the 64-bit Windows 7 Ultimate disc and do a custom Setup on the current installation of 32-bit.

  You will need to do a clean install, there is no place on the way to upgrade Windows 7 32 bit to 64 bit.

  Using the disk of 64-bit Windows 7, install Windows 7 Windows Easy Transfer Utility from the DVD (to find it, simply navigate to x:\support\migwiz, "x:" is the name of your hard drive. (In this case, you will see a collection of files, the important"that you must search for and double-click is 'migsetup'.) run it and create a DAMP (Windows Easy Transfer file), if you have an external hard drive, you can access it later when you perform a clean install of Windows 7 64-bit disk so you can stored there.

  Once you have done this, just do a clean install of Windows 7 64 bit disc. In Windows 7 64 bit disk, start Windows Easy Transfer, follow the wizard screen, tap on which is stored the WET file (external hard drive) and it will restore your personal files and settings. Reinstall the applications needed.

  http://www.notebooks.com/2009/10/07/using-Windows-easy-transfer-in-Windows-7/

  Boot from the DVD 64 bit Windows 7
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)

  Select the disk partition where you want to install Windows 7 click Next.

  You will receive the following warning:

  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

• NDAS services stopped and do not work after installing Windows 8

  Ladies and gentlemen,

  My Services of NDAS stopped and do not work after installing Windows 8. This is necessary to run my SUNGOO LAN hard drive.

  Does sb know what to do?

  Best regards, Rolf

  Hello

  If I understand correctly the NDAS (Network Direct Attached Storage) service has stopped working after the installation of Windows 8. Is this correct?

  Please provide additional information for a better understanding of the issue.

  1 are you faced with the question of the NDAS service on the computer having the hard disk SUNGOO?

  2. how many computers using the hard disk on LAN?

  Specify the computers with Windows 8.

  3 are the computers in a home group?

  Please post the information requested to receive specific troubleshooting steps.

  Other links

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/NDAs-error-wont-see-drive-after-Win7-install/a004b2a3-9dd4-48a1-9ce7-c289931ba17b

  Why Windows is not find my device?

  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  I hope this helps.

• I have Windows Vista Home Basic and I would like to install Windows 7 drivers vista with errors.

  I have Window Vista Home Basic and I would like to install Windows 7 then before as I do I have verify errors 4 of my drivers which are

  Microsoft ISATAP adapter #4 also #7 #12 #15 works not properly so I can update the drivers, then she come in saying.

  This device is not working properly because Windows cannot load the disks required for device error code 3.

  So if I can not fix it I can still install Windows 7. Please help because I need the urgency and I tried all week resolve the

  problems under Vista drives me crazy.

  Jean

  To begin troubleshooting, follow these steps:

  1. Make sure that Device Manager is open, and that the device that has the problem is selected. You can perform certain resolutions recommended by the Device Manager.
     1. Right-click my computerand then click Properties.
     2. Select the hardware tab, and then click Device Manager.
     3. Double-click the type of device that has the problem. For example, if you have problems with your modem, double-click Modems to see the devices in that category.

        A list of devices appears. If a device has problems, the unit has a red exclamation mark next to it. If a device is unknown (usually because of missing drivers), the device has a yellow question mark next to it.

     4. Right click on the device that has the problem, and then click Properties. This opens the device properties dialog box. You can see the error code in the State of the device of this dialog box.
  2. Use the Troubleshooting Wizard, if it is available, to help you diagnose and solve your problem.
     1. In the device properties dialog box, click the general tab.
     2. Click troubleshoot to start the Troubleshooting Wizard. The wizard will ask a few simple questions and provides a solution to your problem, based on the answers you provide. If the Troubleshooting Wizard is not available, go to step 3.
     3. Follow the resolution steps provided by the wizard to resolve the problem.
     4. Check the device status of the device properties dialog box to see if the error is resolved. If the error is resolved, you are finished. Otherwise, go to step 3.
  3. If the Troubleshooting Wizard does not have you helped to solve your problem or was not available, search for your error code in this article.

     Note If you cannot find your error code in this article, contact Support. To learn how, refer to the Microsoft Web site at the following address:

     http://support.Microsoft.com/contactus

     (http://support.microsoft.com/contactus)

  4. Follow the resolutions recommended for this error code.
     • Check the status of the device in the device properties dialog box area to see if the error is resolved. If the error is resolved, you are finished.
     • If the problem persists, unfortunately, this article did not resolve your problem. For your next steps, you can ask for help. Or, you can contact Microsoft Support to help you resolve this problem. To learn how, refer to the Microsoft Web site at the following address:
       http://support.Microsoft.com/contactus

• Having trouble installing photoshop elements and Premier on my computer laptop windows 7?

  I can't install photoshop elememts or Prime Minister 11 on my computer laptop windows 7?

  No matter if you have the disk or downloaded.

  You have purchased a serial number and, in your case, got a disk and a box as added extras.

  You can always download the trial version on the Adobe site with any browser and which activate with your serial number.

  http://www.Adobe.com/cfusion/TDRC/index.cfm?product=photoshop_elements&loc=us

  See also

  http://helpx.Adobe.com/Photoshop-elements/KB/troubleshoot-installation-Photoshop-elements-premiere.html

• have acrobat 6.1 and have updated new computer with windows 8 compatibility issue message get

  have acrobat version 6.1 bought a new computer with windows 8.  tried to install but received message there are compatibility problems.  Noticed when I press print option not you adobe option.

  Acrobat 6, released in 2003, replaced by version 7 in 2005. If your software is nine years older than your operating system. This is rarely a good combination.

  If you upgrade your operating system, you should think to upgrade your software too.

• I have windows me and I am trying to install windows xp on my drive and it will not be installed. How can I fix it?

  I have the disc for xp that I bought. It has been installed on this computer before. I had to restore the computer and now I can't reinstall xp from the disk.

  Hello

  ·         What is the exact error that you are experiencing when you try to install Windows XP on the system?

  ·         You have the full version of the Windows XP operating system or upgrade disk?

  ·         Are doing a clean installation of Windows XP or install an upgrade?

  Make sure that the XP CD is not damaged. If you have the upgrade disc you can not make a format installation. You can only switch to the older operating system to windows XP. I suggest you follow the steps mentioned in the article given below to install Windows XP on the system.

  How to install or upgrade to Windows XP

  http://support.Microsoft.com/kb/978307

• Changed HARD drive and now I can not install windows 7

  I bought a new HARD drive and interlaced old, now I am trying to install windows 7 home Premium and I get an error: "Windows Setup cannot configure Windows to run on this hardware of computers.

  See if it works...

  Download the drivers from this link below (first or second file listed - 32 or 64 bit depending on the case).

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=2101&DwnldID=23060&keyword=Intel+RAPI...

  Copy the files to a flash usb without all the folders drive.

  With the flash player and the installation of W7 media connected to the computer, boot from the installation of W7 media.

  After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.

  You should now see the storage driver files listed.

  If you check the box, it only includes the compatible driver.

  Follow the prompts and I hope, will install W7.

• External hard drives and USB not detected after installing windows 7

  Original title: does not display the hard drives laptops, but do sticks

  for some reason any lately
  any laptop computer portable hard disk or 3.5-inch usb drives work, but do memory sticks
  some show in computer management, some don't
  I've updated the mb drivers
  trying to not format to fix this little problem
  ideas?

  Hello

  1 have had any changes made on the computer before the show?

  2. What is the brand and model of the computer?

  3 have you tried plugging the laptop hard drive on different USB ports?

  I would suggest trying the following steps and check.

  Method 1:

  Run the utility of Windows troubleshooting for hardware and check.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Check if it helps.

  Method 2:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow these steps to reset the computer to start as usual. See step 7 in the article.

  Method 3:

  Throw a virus with the Microsoft Safety scan scanner to make sure that the computer is virus-free.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Safety Scanner WARNING: There could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Let us know the results.

• Try to reinstall windows 8 after fees and crash of pc to install Windows 7

  At the time I was running windows 10 technical preview and I was having problems with my computer to the point that he eventually left and constantly projected blue. I ended up having to re - install windows 7 which was the only drive I have Windows. I already had 8 windows before I had installed the technical preview. I used the wizard upgrade upgrade windows windows 7 to windows 8 when windows 8 are out. Now, I want to be able to return to running windows 8 because some games will not start because of windows 10. I have in the world have looked for a solution but can not find a. I don't know of any way to prove that I bought windows 8 to get my product key.

  You must log on to the same site that you downloaded it since before, your order history will prove that you have Windows 8 and you can retrieve your key.

  Otherwise, you need your receipt email they you when you bought it.

  If these two are dead ends, then you must buy it again.

• Satellite P100 - 194 PSPA6E does not start and will not let me install Windows

  Hello

  I have a problem with my Satellite phone, witch, I got from my brother. I don't know what he did with it, but he does not know.

  When I start the PXE - E61 "Media test failure, check cable" appears. In the BIOS I put in the directory Boot LAN mode on the last position, but despite this failure E61 appears.

  I tried to reinstall Windows XP. The laptop started from the CD and the blue screen appeared and loaded XP drivers needed. But at the end of it, when you enter normally on the menu to choose where to install windows, the screen is black and in the upper left corner a small beam blinked on and outside and nothing happens plus.
  The same thing happens when I leave the laptop HARD drive and start again from the XP installation CD but this time without the HARD disc logically.
  So I thought that the HARD drive is broken and I put it in my desktop PC to test. I installed XP on the drive HARD Satellite in my PC, which worked without problems in my PC. So, I come to the conclusion that the HARD drive is not broken.
  And my BIOS Satellite detects my HARD drive and displays the name of it.

  But what is the problem with the laptop when it is not the HARD drive and BIOS show the good name of the HARD drive? Can someone help me please?

  Hello

  The story is very strange boyfriend generally that the PXE error if the laptop tries to boot from LAN. But in the case where starting LAN source in unavailable, the PXE error appears and shows this message.

  Usually, the BIOS passes LAN Boot option because the other options are not active. This means that the CD/DVD drive does not any bootable disk and the HARD disk is dead.

  So, as you can see you hypothesis was right that the HARD drive could be faulty

  In any case, try to access the BIOS and set it to the default settings save changes and then try to reinstall Windows XP.
  You might also try another HARD drive, I know as your fist HDD recognized correctly but it s worth a try to test the 2nd HARD drive.

• The disk partitioning and choosing the SSD to install Windows

  Hi all

  I'm new to the forum and I hope to get some help with my problem.
  Today, I received my new IdeaPad U510 and I love it. But I realize that the operating system is installed on the SATA hard drive instead of being installed on the SSD (for best performance).
  I would like someone to help me by telling me: How can I install Windows (with the license that was supposed to come with the purchase of the laptop) on the SSD?
  Given that I tried 'set' the OneKey restore but as far as I see, is not allowed.

  Thank you very much for your support.

  First of all, it is better to be * beep * sure you know what you're doing.
  Second, make a bootable Windows USB installation paste and test if it works, just to be sure. Back up your data. Go to the BIOS, disable the TSRI, then set it to SATA AHCI (from RAID or AUTO) mode. Save and reboot. Now you start the installer, repartition your SSD drive (I would recommend going for the TPG plan, it is the only way to boot with UEFI, which has some advantages, that is to say more fast start) and install Windows.
  After that, disable hibernation, windows etc backups so that the free space of your SSD gets to zero after a week of use.
  Keep in mind that this will break your OKR feature, which is not useful anyway if you're a power user.

• Replacing my hard drive and the need to re - install Windows 7 upgrade. I need to install Vista first?

  I have Windows Vist and I'll upgrade Windows 7 make on my hard drive crashed.

  My question is can I install windows 7 fist or should I install vista first then windows 7.

  My question is can I install windows 7 fist or should I install vista first then windows 7.

  You should be able to properly install Windows 7.

• Hi, I have hp mini 110 netbook do you 3601, I slip stream its sata drivers and install Windows xp, help!

  I installed Windows xp and downloaded all the drivers that worked perfectly but driver wifi did not work and there is a "?" in the named device manager as network controller, I can show pic u of this thing, can u please tell me what it is and how can I solve this problem? so that I can use wifi in my college.reply urgent please

  Install the drivers from here

• I need to change my computer and twice the software already installed. How can I continue to use the license CS6?

  I have already installed my CS6 on my pc and my laptop. Now, I need to change my computer.  How can I continue to use the license?

  Hi, you just have to disable it first on your "old" computer before any unistallation. In any application, choose help > Deactivate.

  
  

  See also support Activation & deactivation