I stop in MSE, causing the Defender; just remove the Windows Defender files?

Similar Questions

• Acrobat DC opening causes the Adobe AcroCEF file to multiply in the Windows Task Manager

  Acrobat DC when open causes the Adobe AcroCEF file to multiply in the the Task Manager Windows and the CPU goes to 100%. I have a screenshot of Task Manager to show you what I mean. I have to close Acrobat to make the file stop multiplying itself. Also cannot save the workbook file after attempting to combine PDFs into one file. I logged off creative cloud and back again and I have also uninstalled and reinstalled the program, but the problem persists.

  

  Right-click your shortcut icon, go to compatibility and "run this program in compatibility mode for: Windows XP (Service Pack 3)".   I have also "run this program as Administrator" checked... but who did nothing by itself.

  This solution has cured my problem.

• Download of the current file will stop if I close the window of the Downloader?

  Download of the current file will stop if I close the window of the Downloader in Firefox 4.0.1? This was not the case with the 3.x versions.

  No, as long as you don't close Firefox then the download will continue.

  You can set the browser.download.manager.quitBehavior pref to 2 on the topic: config page.
  
  That will make Firefox asks for confirmation if you want to cancel the download if you close Firefox.

  See:

  • http://KB.mozillazine.org/browser.download.Manager.quitBehavior

  To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.
  
  If you see a warning then you can confirm that you want to access this page.

• Network adapters: Microsoft Windows Mobile remote adapter causes the Windows 7 upgrade to fail.

  Network adapters: Microsoft Windows Mobile remote adapter causes the Windows 7 upgrade to fail.

  I did everything to prepare for the upgrade. The Upgrade Advisor says it all right. But I get the message that this network adapter is a problem. It does not appear in device menager even under hidden objects, so I can't uninstall or update.

  It is obviously a problem for more than two years. Why is there not a difficulty now, or at least a well validated response that meets this situation rather than simply repeat the statement to execute the Advisor (done) or update the driver (which is impossible because the card network can not be found)?

  Hello

  You can try these:

  Step 1:

  a. click the Start button.

  (b) in the search box type devmgmt.msc and then press ENTER.

  c. find under the "Mobile Devices" "Microsoft USB Sync" node. If this is not present, proceed to the next step. Otherwise, right click "Microsoft USB Sync" and choose "Uninstall".

  When you connect your USB phone, it should appear in the device under Mobile Device Manager. Education invites you to look out there and if you find Microsoft USB Sync, uninstall it. If she is not there, go to the next step.

  Step 2:

  Disconnect, and then reconnect your device. Your device driver will be re - install and launch Windows Mobile Device Center.

• Buttons that cause the window to close in IE8

  Hello

  I have a weird bug that seems like it should not be possible.  I use 6 Captivate and SCORM 2004 edition as a .swf.

  I created a presentation of captivate with several software simulations incorporated in it as animations.

  The slides containing these simulations are break through a mostly empty widget hidden behind the animation.

  Each simulation starts with a button start this progress simply to the next slide and ends with a button continue with a javascript function that moves the presentation of the parent to the next slide.  That javascript is:

  function nextSlide() {}

  var objCP = document. Captivate;

  objCP.cpEISetValue ('rdcmndNextSlide', 1);

  }

  nextSlide();

  Each of the six software simulations has the Start button and keep even that was copied and pasted from the first.

  All works perfectly in Chrome, except that JavaScript works only when the project is published on the LMS.

  However, in IE8, I encountered a very strange problem.  Some buttons work as expected, but a few of them cause the window IE8 containing the presentation to close without warning or error.  Non-working buttons remain consistent and continue to have problems even after many republishings, and even after recreate both the buttons and the slides containing simulations.

  When I run it locally, he throws the following errors when I click on one of the buttons to bad:

  49:Wed July 3, 10:44:06 EDT 2013 - unloading

  50:Wed July 3, 10:44:06 EDT 2013 - ClearErrorInfo

  51:Wed July 3, 10:44:06 EDT 2013 - ExecFinish, ExiType = SUSPEND

  52:Wed July 3, 10:44:06 EDT 2013 - ClearErrorInfo

  Anyone has any ideas on this?

  Thank you

  Brian

  Looks like you hit the JavaScript bug found here:

  http://captivatedev.com/2012/12/17/display-the-students-name-from-your-LMS-using-Adobe-cap market-6-x.

  and more info here:

  http://www.cpguru.com/fix-for-the-Adobe-Captivate-6-JavaScript-bug/

  This problem has been resolved in Cp 7.0.  What version do you use?

• How to clear the Windows.edb file in Windows 8

  DISPLAY TO THE CLIENT ACCOUNT *.

  The customer has a PC under Windows 8, and he wondered how to remove the Windows.edb file. He recorded 60 GB of information. Is it possible to have the option of Windows search and have this file shrunk down to the size? Is it possible to empty this folder? Anyone have any suggestions on how to deal with this problem?

  Please respond with more information.

  Thank you very much for the help!

  I just had this problem myself, with a clue consuming 107/278 GiB!

  Here's the trick:
  (1) search for "Indexing Options" (under "settings"). Open it.
  (2) search for 'services' (or run "services.msc") and find "Windows Search". Stop the service.
  (3) remove the Windows.edb file
  4) click on "Change" in the Panel "Indexing Options" already open, then click on "Erase and rebuild" for the index. You can also specify another drive to store the index on.
  Hope that helps.

• Cannot reinstall Windows Vista because the Windows.old file is corrupted.

  I hope someone can help! I'm about to pull out my hair! :)

  I have a laptop Dell Inspiron 1720, under Windows Vista Home Premium, with 3 GB of ram. SP2

  I had problems with error messages

  Here are some of the messages I was getting.

  "Dell Quickset has stopped working"

  "Windows Management Instrumentation has stopped working"

  "The user profile service has stopped working".

  "Windows Update has stopped working"

  There were a couple more but I do not remember. They are all gave me the ability to check online for a solution I have chosen and the message would go for a while, but not forever.

  I'm tired of dealing with him, so I used my Dell disk to reinstall Vista. I did not choose the repair option first. I chose to do a clean install. When I got to the last step where it says "Complete the Installation", it gave me an error message telling me that the "Windows.old" file is corrupted. I do not have wright the rest of the information down, but he told me to run the check disk utility. (I think it has been shown as chkdsk). I clicked 'OK' and the screen went black and stayed like that for an hour. I turned off the computer and repeat all the steps but always goes to the black screen and stops. I tried to use the fix and it found a problem immediately and that fixed it, but after reboot, same thing. Yesterday I ran again the repair option, and it still works today. All night and nothing. She is still ongoing as I type this message. My question is how to run disk utility to check without an operating system installed? Use the "Diagnostic" option when I boot the disk from Dell? Any ideas on how I can get reinstalled Vista?

  Boot from the Dell cd and run diagnostics

• on my laptop running windows 7 more information disappeared from the window - topics (file, publishing, display, etc.), address bar and navigation buttons - everything I can see tabs - how do the lack of points to display

  Missing on my laptop running windows 7, all the info displayed at the top of the home page. All headings, i. e. file, change the view etc. disappeared. There is no address bar. There is no "home button", the button refresh, etc.. My wife was using the machine when it happened, so I don't know what she was doing. How to restore these features?

  most of the information has disappeared from the window - topics (file, publishing, display, etc.), address bar and navigation buttons

  When all the toolbars are missing, you are probably in full screen view, press F11 to toggle mode full-screen, or you can move the cursor to the top of the screen.

  The real problems you describe all set thanks to an extension and customization, see 01:10 steps later...

  You can make Firefox 5.0 looks not like Firefox 3.6.19, see numbered 1 to 10 points in the next topic difficulty Firefox 4.0 UI toolbar, problems (Make Firefox 5.0, or 4.0.1 resemble 3.6). If you make changes, you must be aware of what has changed and what it takes to use changed or missing features.

  • http://dmcritchie.MVPs.org/Firefox/Firefox-problems.htm#fx4interface

  It is much more beyond these first 10 steps in the list, if you want to make Firefox more functional.

  Toolbars and their contents have been rearranged and buttons have been merged dual-use, the net result is that I could see about 25% of what I had before and recorded about 10% of the area of the toolbar with great loss of functionality to hide things that might already be hidden and to create confusing buttons that already have keyboard shortcuts and don't need to be seen. The only good thing that has been ' Ctrl + / ' has been added to hide/show the modules bar that has not replaced the status bar.

• The folder list is not the WIndows shortcut files

  Hello

  Why the 'Folder list' vi does not have the Windows shortcut files? Short WIndows files have an extension of "*.lnk", I'm using Labview 2011 SP1 on a WIndows XP Professional computer, the shortcut files on a mapped network drive.  I can find the files of shortcut if an open one window cmd and use the dir command.

  A potential problem is that you might be looking at the wrong place. A shortcut to a file appears in the list of files, and a shortcut to a directory appears in the list of directories. However (at least LV2011) shortcuts to directories that don't exist - as a disconnected network drive - as highlighted in the list of files.

  Mike...

• What is the purpose of the Windows.edb file?

  I found a few relevant judicial artifactics examining the Windows.EDB file.  I'm looking for a file from a Microsoft source Windows.edb difinitive explanation.

  There is no source of Microsoft here.  We are all volunteers, not employees of Microsoft, Windows users help other users of Windows.  If you want a definitive answer and official, you must use a method on the Microsoft web site "contact us" to connect with Microsoft.

• Is there any command in the windows command file that is similar to the unix grep command

  Hello
  
  I have a batch file that returns the status of the database to a file ex: "OPEN." Now I want to read the output file and search for the string 'OPEN' to an another batch file. any suggestions?. This is similar to the unix "grep" command I want to be done in the windows batch file.
  
  It's my real batch file
  
  REM - Description: check whether the database is in PLACE
  REM - use:
  REM - ORACLE_SID is an input for the file parameter
  REM-
  
  REM - beginning of batch file
  off @echo
  Set ORACLE_SID = %1
  (
  echo connect plp/ltd1plp@%1
  ECHO has put cmdsep on
  ' set cmdsep echo ' ' '; --"
  echo term on
  c:/status_log.log reel Echo
  echo select status from v$ instance;
  Reel echo off
  ) | sqlplus/nolog
  REM - end batch file
  
  
  
  Thank you.

  The same link of [google cache | http://209.85.229.132/search?q=cache:EJrm9tgj0a8J:www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/find.mspx+windows+find&cd=1&hl=en&ct=clnk&client=opera]. You can also use help:

  find /?
  

• Stop: c000021a {fatal error} the windows logon system process ended unexpectedly with the status of 0xc0000034 (0x00000000) (0x00000000) need help please system does not start

  Hi my HP Compact computer running with windows Xp professional recently had security tool, antimelware doctor and I kind of have got rid of him, he also put some viruses on the winlog thing and I could not get rid of it with antivirus software that I don't know the name of, Malwarebytes' Anti-Malware and AVG 2011 I did a scan antivirus in safe mode with AVG(in command prompt mode) and he put a bunch of virus the virus volt, I'm out there and there was a running called 2008 command prompt and I clicked on output and it says that this program is not complete (or something similar) save all unfinished work before going out and me did not run this command prompt , so I left Malwarebytes' Anti-Malware and avg, then I restart my computer and we get the blue screen of death say stop: c000021a {fatal error} unexpectedly finished process windows logon process system with the status of 0xc0000034 (0x00000000) (0x00000000) system will reboot, and whenever it restarts, it says the same thing, I can't use safe mode cause it resets and starts normally any help pls I have files I need this computer?

  You can create a bootable XP Recovery CD of Console and replace the file, but it may be easier for you to make boot CD of a Hren.

  When you start the Hiren's CD, choose the XP Mode of Mini and it has an interface in XP style Explorer where you can find and replace the winlogon.exe suspicious or missing file.

  There should be a copy of winlogon.exe here:

  c:\Windows\System32\dllcache

  Rename your current c:\windows\system32\winlogon.exe file (if it exists) and copy / paste the replacement of c:\windows\system32\dllcache.  If you do not see here, search your HARD drive and find one.  Another possibility (depending on your environment) is c:\windows\ServicePackFiles\i386, or c:\i386 d:\i386...

  You just need to replace the file winlogon.exe somehow.

  When you are finished replacing, restart as usual (remove the CD bootable of course).

  With the help of Hiren, you can also copy offshore on an external device (USB key or HARD drive), all personal security files.

  Do you have a Hiren BootCD you can download here:

  http://www.hirensbootcd.NET/

  On the left, click on download, scroll down, choose the latest version, the download link is a little hard to see.  It is at the bottom of the page, above the drop for older versions and looks like this (click this component to download the ZIP file):

  Direct HTTP mirror + Torrent, Torrent Magnet

  Click the "Live HTTP Mirror" link to start the download and save the ZIP file on your desktop of somewhere that you can remember.

  The ZIP file is large, so the download will take probably some time to complete.  Then unzip the download to extract the Hirens.BootCD.ISO file that will be used to create your new bootable CD.

  Create a bootable CD. ISO file is not the same as simply copying the. File ISO onto a blank CD.  You must use software that includes how to burn a. ISO to a CD to create a bootable CD.

  File ZIP the Hiren is the file BurnToCD.cmd that you can double-click to launch it.  The BurnToCD.cmd will use the file BurnCDCC.exe to burn the. ISO file onto a blank CD using your existing CD burner.  You can also use your own burning software as long as your software is able to create a bootable CD. ISO file.  More modern burning programs can create a bootable CD. ISO image.  Create a CD from an ISO image bootable is not the same as just the file on a CD burning.

  If you need a simple and CD burning, this is a free software popular software:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your new bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.

  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When starting on the Hiren's CD, you will see a menu of options.  Choose Mini XP.  It will appear while Windows is loading and you will be presented with a desktop computer that has the look and feel of the interface of Windows Explorer, you are already accustomed to using.

  Using the Mini XP, you can access Internet, maneuvering around your system, search for files, copy files, replace the files and run the scans for malware, edit the text files (like the c:\boot.ini) etc.

  There are dozens of free and useful tools included in the CD that can be used to repair your system or copy your important personal files on another device (like a USB device or an external drive) in the case where you just give up and decide to reinstall your XP (I hope that you will not make this decision).

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• HDR-CX405 how to stop recording double, only the required mp4 files.

  Hello Sony,

  Yesterday I bought HDR-CX405. My question is, how to stop double registration? Only the required mp4 files.

  The two file created on the card then than shooing video scene - AVCHD and mp4.

  I don't want AVCHD (file too big), I want to just file mp4 only.

  Dual video REC

• Windows ICS Services stopped & could not start the windows firewall in windows xp professional sp2.

  I am facing a problem regarding the ICS Service & could not start windows in windows Xp service pack 2 firewall, whenever I have install windows Xp Sp2 and join the network, the ics services ceased and the windows firewall. While windows firewall service starts when I restart my computer. But after some time stopped again had services that I'm cold does not access the readers of part, could not access network resources.this problem occurs only on windows xp sp2, when I install windows 7, then all better.i work fetch on different forums, apply the settings but I'm not able to solve the problem on base all the time. Someone tell me the permanent solution of this problem, on a forum, I see this solution,sharedaccess.reg and settings.but I am still unable to find a permanent solution.

  Someone tell me the permanent solution of this problem?
  
  
  
  

  Hello

  Here are a few troubleshooting steps that you can try to solve this problem. See the following links.

  You cannot start the Windows Firewall service in Windows XP SP2

  http://support.Microsoft.com/kb/920074

  Registry WARNING: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see this link:

  http://support.Microsoft.com/kb/322756

  Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users

  http://support.Microsoft.com/kb/875357

  If you have additional problems, please reply to this post and we will be happy to help you further.

• InDesign CS5 stops when I open the window

  Why is this happening? I just install CS5 a few months ago, and now, whenever I try to open the window, I get the window "Indesign has encountered a problem and needs to close."

  Have you tried to reset your preferences?