Network adapters: Microsoft Windows Mobile remote adapter causes the Windows 7 upgrade to fail.

Similar Questions

• Could not find network adapters: Microsoft Windows Mobile Remote Adapter__Need to upgrade the driver before updating to Windows 7__

  I'm trying to go from Vista to W7, but keep this message:

  The upgrade of Windows will affect the following programs or devices:

  These devices may not work properly after the upgrade. Before the upgrade, we recommend that you update the drivers for those devices. Cancel the upgrade, open the control panel and search for "update device drivers" or go to the website of the manufacturer of the device to search for updated drivers.
  • • Network adapters: Microsoft Windows Mobile remote adapter

  I checked the list of drivers and cannot find the adapter.

  How can I solve this problem?

  ·                                 http://social.answers.Microsoft.com/forums/en-us/w7install/threads

  "Download Windows 7 installed and activated on your PC."

  They will help you in the Windows 7 Forum at the above address.

  For any other issue of Windows 7, here is a link to a list of the Windows 7 Forums:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 forum for questions on windows 7.

  See you soon. Mick Murphy - Microsoft partner

• What is causing the error event ' BCM42RLY service failed to start due to the following error: the system cannot find the file specified "Event Id 7000

  What is causing the error event ' BCM42RLY service failed to start due to the following error: the system cannot find the file specified "Event Id 7000

  Hello

  1. Since when are you facing this problem?

  2. What is the number of brand and model of the computer?

  3. have you made changes on the computer recently?

  BCM42RLY is a Broadcom network card driver. I suggest that you uninstall and reinstall the drivers and check if it helps.
  Uninstall or reinstall a device: http://technet.microsoft.com/en-us/library/cc725782.aspx

  Hope the information is useful.

• Cannot search the network for Microsoft Windows (XP SP3)

  Hello

  On holiday, I have a PC running Windows 8.1 and a former under XP (SP3), both connected to a Netgear router for Internet access.

  Under Windows, 8.1, the XP PC appear not at all, even when I search by name.

  The WinXP when I click (down posted by exploring folders) on "Microsoft Windows network", I got an Error Message:

  Impossible to scan the network, you have no network, or the network is not started.

  I've followed all the recommendations for sharing files between Windows 8.1 and XP:

  Same network type: private

  Even working group: PERSONAL

  Different names.

  Option of sharing files on two PCs in network settings.

  Windows 8.1, I chose: encryption 40 or 56-bit.

  I can share folders between your desktop in Windows 7 with Win 8.1 and Windows XP Home.

  File sharing has been possible, in my view, before I've upgraded to SP3 of XP last year.

  I know that Windows XP is not supported, but I need this old PC to display movies on my old TV (S_Video)!

  Thanks for your replies.

  MdParis

  In addition...

  You may translate the error of another language?

  On the XP computer.

  • Click Start, run, type "services.msc" (without the quotes) and click OK
  • Scroll down to "Workstation" (probably the last item in the list) and double-click it
  • Make sure the "Startup type" is "automatic".
  • Click on the 'Start' button (if the service has already started, please report this), and then click OK
  • Close the Services applet

• Windows 7 upgrade disk fails on hp a6720y with corrupt JRAID. SYS file, corrupt JGOGO. SYS file

  I'm trying to upgrade a HP Pavillion a6720y Vista Home Premium 64 to Windows 7 Home Premium 64 via the official HP upgrade disk that I ordered a few years ago. Whenever he tries to boot into Win7 for the first time that it fails on the file "JRAID.» SYS'.» I have 3 internal drives on the (starting) SATA1 and SATA2 (data) and a DVD-ROM, SATA3 and USB external disk BIOS interface is (and was) the RAID value (even if they are not mirrired or scratched, just separate the readers). I found a newer version of JRAID. SYS and installed, but now it fails on "JGOGO." SYS"(says file is missing or corrupted).» My version of Vista is using the same version of JGOGO. Facilities SYS Win7 and says is corrupt.

  Any help would be appreciated. Thank you.

  I forgot to add, I also had problems with getting Windows 7 update for the first time. Updates (more than 130 of them) would be to continue for awhile, then seems to hang for hours. I downloaded the Windows 7 SP1 from Microsoft (make sure you choose the right version, 32-bit or 64-bit) and installed everything first. It takes time to install it, but it finally finished ok. Then I rebooted and installed the Windows updates required in groups of five or six instead of all at once. Don't know if I needed to do, but they all eventually installed ok.

• To connect to a network using Microsoft Virtual WiFi Miniport Adapter

  I have a laptop windows 7 and I found the so-called map of Microsoft Virtual WiFi Miniport, I don't know what it's for, but I don't know that it's a virtual wireless card.

  But I can't connect to a network to use it. and I don't know how to connect to a network.
  I DO NOT have any errors, but I just want to know what it's for. :-)
  Thank you.

  Its uses the wireless function integrated hostednetwork that transforms your computer equipped with wireless (WiFi) in a wireless router/access point. I use this feature to connect an iPod Touch (4th generation) wireless internet via my laptop while traveling in places where there is no wireless internet access, but it is wired internet access, IE. to some hotel/motels for example.

  The adpater is not normally used to connect to wireless networks. This work is for your hardware integrated wireless (WiFi).

  http://Windows.Microsoft.com/en-us/Windows7/view-and-connect-to-available-wireless-networks

  Interface based on FWIW you can make use of the hostednetwork function by configuring using netsh wlan set hostednetwork of command line commands or use free programs such as Connectify and virtual router that uses a graphical interface.

• I get "Could not access network %APPDATA%\microsoft\windows\sendto location" when I try to install iTunes

  I am trying to install the latest version of iTunes (10.2). I tried the whole registry thing, and that did not help at all. I had removed the previous version as well but that didn't do anything either.

  Hello

  Follow the information from apple to the link below

  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  http://support.Apple.com/kb/HT1923

  and or ask for their support of itunes

  http://www.Apple.com/support/iTunes/

  Also try the discussions of apple itunes

  http://discussions.Apple.com/category.jspa?categoryID=149

• Microsoft Windows 7 KB2724197 update fails to install on laptop HP Pavilion G7

  HP Pavilion g7 - 1033cl running Windows 7 Home Premium SP1 with all the previous updates applied

  With that of the road here is my problem.

  The 09/10/2012 when I stopped my laptop for the night, he told me it was going to install 14 updates of the OS. Usually this isn't a problem so I let him do his thing and went to bed. When I turned on the morning, he went through his usual thing to get updates. That night, when I went to bed he told me that he had 1 update to apply, so I let him do. The next night the same thing happened, he had 1 update to apply. That's when I checked and he tried to apply the same update from the previous night, in fact, he tried to apply 1 updates the 14 from 09/10/2012.

  It's already happened and the solution has always been to uninstall the update and reinstall them one at a time. It is time very trust because most of these updates will require a restart so to uninstall them and install their and it takes my laptop 3 or more minutes at the stop (my wife's cell phone bought at the same time takes less than a minute to stop, but I digress).

  If that's what I have to do is there a way to uninstall all these updates at the same time? (who will save me at least 13 reboots)

  Or is there something else I could try?

  BTW: If I try to install KB2724197 now it comes up with the message:

  Errors:

  Code FFFFFFFE Windows update encountered an unknown error.

  Get help with this error

  The "get help with this error" is interactive and takes you to a list of 30 options with all the known error codes (but not FFFFFFFE, I guess it's because we don't know).

  Any suggestions are welcome.

  I just want you to know that I found a piece of software that has removed the Alureon.A of my system.

  I went to Microsoft and serched on Alureon and got several hits I clicked on one that said how to remove Alureon. The link is http://answers.microsoft.com/en-us/windows/forum/windows_xp-security/how-to-remove-alureon-a-from-xp/eef4fe74-5f51-41cf-9523-754911ade40e

  This has reported me Kaspersky TDSSkiller. I thought I had nothing to lose so I downloaded and executed. He pointed out that the Trojan horse called Pihar.C not Alureon.A but I did remove anyway and after a reboot no Alureon message more Microsoft Security Essenials. And the KB2724197 update is now installed on my laptop.

  Thank you for your help and I hope that this Information might help someone else in the future.

  TDSS Killer link is: http://support.kaspersky.com/faq/?qid=208283363

  Please add it to your box of tricks

  I'm just glad I don't have to do a complete reinstall.

• Network adapter for the B200 M2 upgrade of M81KR c1280 Server

  Hi team:

  I plan to make a replacement of the M81KR network card to the C1280 B200 M2 blade servers.

  Could you please help me on everything that I have to consider for this task?

  UCS manager version 2.2.1

  VMWare 5.5.U1. vSphere

  If you have links or guide step procedure, it will help a lot.

  Thanks in advance for your cooperation

  Javier

  Hi Javier

  2.1.3 was the last version supporting M81KR.

  The enic/fnic M81KR and VIC-1280 drivers are the same

  VIC-1280

  1.5.0.49 = card driver (FNIC), 2.1.2.38 (ENIC)
  Adapter Firmware = 2.1 (3)

  M81KR

  1.5.0.49 = card driver (FNIC), 2.1.2.38 (ENIC)
  Adapter Firmware = 2.1 (3)

  Therefore, I see no problem; you change the adapter I/O and associate the SP again.

  Walter.

• Reinstallation of Windows 7 upgrade disk fails

  I'm trying to reinstall Windows 7 on my computer, as the strain of her age is starting to show. I hope that some performance improvements.

  But I get this error message:
  "The unattended Setup answer file contains an invalid product key. Remove the invalid key, or provide a product key valid in the answer file for unattended Setup to install Windows. »
  I don't know if it is just that I have a version of Finnish language of the OS and did not bother to write the error message in its complete form, but something very close to that anyway.
  I couldn't find any solution for this through Google. People had got this error, but it is especially in the relations of a virtual PC installation.
  Initially, I had Vista, but I then upgraded to Windows 7 with a upgrade disk. I'm trying to reinstall using this disc of Windows 7. My Windows 7 is genuine and I have not had problems.
  I think it might be because the codes to activate Vista and Windows 7 are different? Maybe I have the Vista activation code in my file without supervision when there should be order in a Win7 to make it work? Is it still possible? I would naturally opinion of someone who is a bit more up-to-date saw that I could make a mess of things just dive head on.
  Should what precautions I take to debug this problem and solve it.

  See the following topics:

  If you use an unattend.xml file to reinstall and get invalid product key, you will not want to change the file.

  See the following post: http://social.technet.microsoft.com/Forums/en/mdt/thread/e56aee98-c97e-4825-a960-7da2db707414

  If this does not work, try the following:

  Boot from the Windows 7 DVD
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)

  Select the disk partition where you want to install Windows 7 click Next.

  You will receive the following warning:

  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

• Windows 8 Upgrade Assistant failed on Satellite P775 program

  I tried to start the Wizard Windows 8 on my P775 upgrade program Satellite.

  He began by displaying

  Verification of components; Download Windows 8 components data.

  ...
  Components of reading.
  TOSHIBA Wireless LAN indicator consisting
  ... etc...
  Got TOSHIBA Contrasena component supervisor
  Reading Windows components.

  then displays a Message box
  'Cannot read the target (Windows 8) INI file.'

  How can I solve this?

  Thank you

  Did you follow the instructions here:
  [How to upgrade to Windows 8 - useful information | http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=68845]

• Remove devices multiple adapter remote Microsoft Windows Mobile or Windows Mobile Device Center of difficulty

  I currently have 244 devices with Microsoft Windows Mobile adapter hidden, not connected, listed in Device Manager in Windows Vista. Windows Mobile Device Center stops working correctly when the device name is Microsoft Windows Mobile Remote adapter #243 or higher. Y at - it a fix for Windows Mobile Device Center, or a way to easily remove all 244 cards at the same time?

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. Appropriate in the MSDN forum.
  http://social.msdn.Microsoft.com/forums/en-us/categories/

• Microsoft Virtual WiFi Miniport Adapter driver problem

  Hi guys,.

  I have a problem with the Microsoft Virtual WiFi Miniport Adapter, see the image below, please help,

  all the best, bluesfloyd,

  

  Hello

   
  Thanks for posting your query in Microsoft Community.
   
  1. what exactly is the problem you are having with your system?
  2. What is the brand and model of your system?
   
  Microsoft Virtual WiFi Miniport adapters are hosted wireless network drivers that assist in the virtualization of a physical wireless adapter in more than one sometimes referred to as Virtual Wi - Fi virtual wireless adapter. If your system gets an update for Microsoft Virtual WiFi Miniport adapters and you get an error Code 31 in Device Manager, it means the device has no a way.
  Error codes in the Device Manager in Windows - 31 of the Code
  http://support.Microsoft.com/kb/310123/en-us#31
   
  Please try these steps and check if the problem persists:
   
  Method 1:
  Run the hardware troubleshooting tool.
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us?EntryPoint=lightbox
   
  Method 2:
  1 open Device Manager by clicking the Start button, click Control Panel, click System and Security, and then, under System, click the Managerof peripheral . If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
   
  2. in the list of hardware categories, find and develop network adapters , select the device for Microsoft Virtual WiFi Miniport Adapter driver you want to update, and then double-click the device name.
   
  3. Click tab driver , click Update driver, and then follow the instructions. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
   
   
  For more information, visit the below mentioned link:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Hope this information is useful. If the problem persists, please post back with your results for further assistance, we will be happy to help you.

• TCPIP.sys error, causing the screen blue Windows 7 x 64

  Hello:

  My laptop crashes repeatedly and randomly. I enclose a photo below and dump files can be found at:

  https://onedrive.live.com/redir?RESID=F5BC544590934502! 128 & authkey =! AEd-rGpg7RWXhpw & ithint = the file % 2crar

  Thanks a lot for your quick help.

  Harouna

  

  Hi Alfonso,.

  I see that you have several files according to their analysis, here's the report and dump.

  BugCheck D1, {, 2, 0, fffff88001c607c4}

  Probably caused by: tcpip.sys (tcpip! IpNlpChecksumDatagram + b4)

  DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)

  An attempt was made to access an address pageable (or completely invalid) at an interrupt request level (IRQL) that is too high.  This is usually caused by drivers using a wrong address.

  -------------------------------------------------------------

  The last report of dump file:

  BugCheck D1, {0, 2, 0, fffff88001c9553b}

  Probably caused by: NETIO. SYS

  DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)

  An attempt was made to access an address pageable (or completely invalid) at an interrupt request level (IRQL) that is too high.  This is usually caused by drivers using a wrong address.

  ------------------------------------------------------------------

  Both files can be linked to the network adapters. I suggest you to visit the computer manufacturer's website and install the latest network maps and check if that helps. The netio.sys comes probably from ZoneAlarm.

  There can be a clash between ZoneAlarm drivers and drivers Windows such as reported in the following thread: http://social.technet.microsoft.com/Forums/en/w7itprogeneral/thread/8aabb1a2-49d0-4bc2-92ca-dce7ddf5af73 similar BSODS have also been reported with Norton Antivirus and, as noted in the link, it seems to be high battery use or conflict involving Windows drivers and third-party filter drivers. http://community.Norton.com/Norton/board/message?board.ID=nis_feedback&thread.ID=73834

  You can try, as suggested by the Symantec link, disable NetBIOS over TCP/IP, and you might also uninstall Zone Alarm if problems persist.

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• two physical network adapters

  I repost this hope someone has an answer, I have the version free vm esxi with two physical network adapters, one fix on my lan to the wan port

  I have install windows server with two NICs, my only choice is flexible and it shows two NICs in winodws question she the same nic phiscal side lan I need to do both (I know it's the same thing since it has the same number of mac).

  Help, please

  Frank

  Have you set up a second virtual connected to the second physical NETWORK card? -see (http://www.vmware.com/pdf/vi3_35/esx_3/r35u2/vi3_35_25_u2_quickstart.pdf) quick start guide for instructions on how to add a virtual switch

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful