I thought that the watermark to the image, I have a license would go far published whaen.  It does not and is now on Facebook.  I did the image through stock Adobe license and eventually found the version without the stock of Adobe wrote in my cloud of Ad

Similar Questions

• How can I activate an older version of Photoshop that I have loaded on my new tablet? Web activation does not work, and when I call the number, it is said that it is not longer used. In the meantime, I'm up to 13 days until it stops working due to not bei

  How can I activate an older version of Photoshop that I have loaded on my new tablet? Web activation does not work, and when I call the number, it is said that it is not longer used. Meanwhile, I'm 13 days until it stops working due to not be enabled. Help?  I really need to continue to use this product for my home business. It works very well not activated but the threat is that it will stop working in 13 days more if I don't get activated, and none of the activation methods that they list seem to work.

  You can download CS2 if you have a valid license for CS or CS2.

  And you have to follow the instructions and use the download again AND the new serial number.

• I have a license to cs3 Middle Eastern version, the hard drive broke down and had to be replaced and reinstalled. Impossible to activate it maintains a maximum number of licenses Please Help

  I have a license to cs3 Middle Eastern version, the hard drive broke down and had to be replaced and reinstalled. Impossible to activate it maintains a maximum number of licenses Please Help

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

  -Cloud desktop http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html

  -Cloud Getting Started https://helpx.adobe.com/creative-cloud.html

  -you will need to enter your original serial number during the installation for non-Cloud programs

  - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

• I bought a picture but when I downloaded it, it always says "Adobe Stock" on it. Is this normal? I thought that once I bought article which could disappear as I would really like to use the point on Web sites, etc. Help, please.

  I bought a picture but when I downloaded it, it always says "Adobe Stock" on it. Is this normal? I thought that once I bought article which could disappear as I would really like to use the point on Web sites, etc. Help, please.

  You can also check:FAQ: where can I find useful links on the use of Adobe Stock?

  I'm moving this discussion Adobe stock

• I had endless problems with Lightroom since the purchase of subscription for one year in December 2014. Now, the development Module was disabled, as they claim that my subscription has expired...  He spent more time to work does not, and I'm bitterly briv

  I had endless problems with Lightroom since the purchase of subscription for one year in December 2014. Now, the development Module was disabled, as they claim that my subscription has expired...  He spent more time to work does not, and I bitterly regret it.  Help, please!

  Open the Adobe Creative Cloud application then go to preferences then sign out and then sign back with the same Adobe ID that you used to purchase the subscription photographers, that is to say the same e-mail address and password.

  Then open Lightroom and go to the Help menu and make sure that it is signed in with that Adobe ID email address.

• Flash Player pop up box "requesting permission to store information on my computer" does not and will not disappear. How can I get rid of him. It is most annoying that there is in the middle of the screen.

  Flash Player pop up box "requesting permission to store information on my computer" does not and will not disappear. How can I get rid of him. It is most annoying that there is in the middle of the screen.

  Move the cursor over the video.  Right-click.  Click on settings, click on the box "don't ask again". And then click Close.  This will work.

  For some reason, always worked for me, but in the last two days, it does not work, and it seems to freeze on the

  video.  See if it works for you.

• Hi, I thought that I ask here because I can't seem to find it online. I use Lightroom 5, and before my sliders temperature would be as follows:-100-100 yellow-100-100 blue green magenta for a reason, now the blue to the yellow scale is

  Hi, I thought that I ask here because I can't seem to find it online.
  I use Lightroom 5, and before my sliders temperature would be as follows:
  -100-100 blue yellow
  -100-100 Green magenta

  For some reason, now the blue to the yellow scale is from 2000 to 50000. Magenta to green is always the same.

  Can someone help me solve this problem? I literally have no idea what to do!

  Now you shooting RAW files.

  For JPG and TIFF, the two scales are-100 to 100.

  For RAW files, the Temp is 2000 to 50000 and the hue is-150 to + 150.

• Hello - I have just brought a Panasonic Lumix FZ70 but CS5 does not recognize the raw file (.) RW2). but aid for raw files says that the Lumix FZ70 is supported. Help

  Hello - I have just brought a Panasonic Lumix FZ70 but CS5 does not recognize the raw file (.) RW2). but aid for raw files says that the Lumix FZ70 is supported. Help

  Need of this camera camera raw 8.2 or later. Cannot use this CS5 version. You will need to download the 9.1 free dng converter and convert your images to DNG version CS5 can handle.

  Using Photoshop | Digital Negative (DNG)

• Updates do not install, Sections of Vista does not and cannot start the Audio Service

  I try to install the updates on windows update but important as the service package 2 do not work, they start then stop and say failed code "WindowsUpdate_80070643"

  boxes keep popping up saying some files are damaged or not installed properly and that I should reinstall as a file call... system32\AVRT.dll. Windows Media is not no longer works.

  My Audio service is not running, I'm not sure that there is a problem in microsoft windows but the button to switch on the audio does not, and a box pops up saying it does not yet have another pop up says that everything works.

  any help? Please

  Hello
   
  a. updates have you tried to install?
  (b) button to switch on the audio of your computer are you using?
  c. what exactly happens when you try to run any audio/video file?

  You can try the steps outlined in the article below and check if this help.
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070643

  For audio problem you are trying to run the troubleshooter which may help. It search common problems with your volume settings, your sound card or driver and your speakers or a headset.

  1. open the troubleshooting of Audio playback by clicking the Start button, then Control Panel.
  2. in the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on the audio playback problems. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  You can also try to update check you and sound card driver if it works. The article below will help you do.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Also, check if the following services are set to automatic.
  a. Windows Audio
  b. Windows Audio Endpoint Builder

  Here's how:
  1. click the Start button, type services.msc and press ENTER.
  2. go to any services mentioned above at the same time, right-click on it and select Properties
  3. click on the tab general, select automatic for startup type. Also click the Start button, if it is not started.
  4. click the Dependencies tab and make sure that all addictions services are set to automatic. Then click on the OK button.

  After return to that exact error messages we can help you better.

  Let us know if it works.

  Kind regards
  Umesh P - Microsoft Support

• I have an Acer - processor AMD A10, 16gig ram desktop pc, I've upgraded to windows windows 10 8. When I open lightroom everything is ok in the library. When I select develop LR does not and I have to close it. If I delete a photo from the library of the h

  I have an Acer - processor AMD A10, 16gig ram desktop pc, I've upgraded to windows windows 10 8. When I open lightroom everything is ok in the library. When I select develop LR does not and I have to close it. If I delete a photo from the library of the same thing happens. How can I fix this., he can be to stop what is happening

  Hello Sarika

  Thanks for your help.

  It's not that simple I thought he'd be when I used your method that whenever I tried to uncheck 'Use graphics processor' Lightroom 6 crashed.

  At least you put me on the right track and I persevered and found the file relevant agprefs of Lightroom web help and followed the instructions to change manually.

  I have changed two files with the same name but stored in different locations.

  Everything works fine now.

  Thank you once again.

  Mick

• My help and support is does not and same time erorr code 0 x 80070424 shows and I didn't do the fix on erroe code no chance

  My help and support is does not and same time erorr code 0 x 80070424 shows and I didn't do the fix on erroe code no chance

  Hello

  (a) don't you make changes to the computer until the problem occurred?

  (b) when was the last time it was working fine?

  (c) what are the troubleshooting steps you tried to solve the problem?

  I suggest you follow the steps in the KB article below and check if it helps:

  http://support.Microsoft.com/kb/968002

  Hope this information is helpful

• I try to install the update of PS CS6 can read files camera raw Nikon D800.  The exe file fails and says trying to install the application manager.  I did it and the update still does not work.  Now what?

  I try to install the update of PS CS6 can read files camera raw Nikon D800.  The exe file fails and says trying to install the application manager.  I did it and the update still does not work.  Now what?

  update by downloading the files directly and then apply them: http://www.adobe.com/downloads/updates/

  If this fails, attach a screenshot of the error message if it is in English.  otherwise, quote it.

• I asked firefox does not remember passwords now it wont let me turn the tide?

  Hello
  I need help please, I asked firefox does not remember passwords now it wont let me turn the tide?
  I go into OPTIONS/SECURITY and don't forget NO words of PAST of SITES FOR, is is more highlighted so I can't select it.
  I have one installed and re installed Firefox and this has not solved the problem.

  Can someone please offer a solution? Thank you

  Hello, firefox will not save your passwords when you put to execution in permanent private browsing mode ("never remember history" in options > Privacy panel).

  Privacy, historical settings of navigation and-no-track

• When I connect to Windows Live Hotmail, I see my emails but cannot access that everything is frozen. A message appears while Live does not and asks me to refresh.

  When I connect to Hotmail, I see my emails but cannot access that everything is frozen. A message then appears that direct does not and asks me to refresh. Windows looking for a solution and after a new wait everything is accessible. Very annoying, how to cure it?

  Hi techcnophobe1,

  Thank you for visiting the Microsoft answers community.

  The question you have posted is bound using Windows Live and would be better suited in the Center of Windows Live Help solutions. Please visit this link to find a community that will support what ask you

• Vista Windows freezing guard, does not and will not close properly

  My computer freezing guard, does not, and it not stop correctly. What should I do to solve this problem! I tried to delete the temporary files and running a virus scan and no help

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have
  EVER had on this machine, including those you have uninstalled (they leave leftovers behind which)
  may cause strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have
  Open, which DLLs they have loaded and more. This exceptionally effective utility will show same
  you who owns each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured so that it starts automatically when your system
  boots and you login. Autoruns shows you the full list of registry and file locations where
  applications can configure Auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded
  automatically when Windows starts. For each request, the following information
  appears: Type of startup (registry/Startup folder), Command - Line String, name of the product;
  File Version, company name, location in the registry or the file system and more. It allows you to
  allows you to easily disable or remove unwanted programs that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The
  Window Watcher says it all, reporting of any window created by running programs, if
  the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now click on
  Driver update (this can do nothing as MS is far behind the certification of drivers) - then right
  Click on - uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, this leaves ONE of Windows updates, but it will not install the drivers who will be generally
  be older and cause problems. If updates offers a new driver and then HIDE it (right click on it) and
  Then, get new ones manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.