I tried "Remapping ACTIVE" in BIOS > Advanced tab in my Windows 7 Pro 64 bit, 8 Gb RAM (3.24 usable) computer and get the Blue Screen of Death.

Similar Questions

• I get the blue screen of death whenever I try to play a video - regardless of the source (you tube or CNN). Instant death! I tried to reinstall Adobe Flash player. Any help would be appreciated, if not his return to IE...

  Blue death screen / system crash when you try to play the video or to copy an image from the internet

  On further study, please do not go on the road to perdition as I trod.

  However, to do this: go to http://www.adobe.com/software/flash/about/ and right CLICK on the logo that is being charged. THEN: Navigate down until "settings", click it, and you should have the choice: "disable hardware acceleration". NOTE: If you do NOT have this choice, study the icons down quickly: on MY screen, the left-most is an icon that looks like a video monitor: click on it and give you the opportunity to "disable hardware acceleration".

  It works, if you can get it done before you get a BSOD! AND do not take the life of your computer in your hands by updating your video drivers. I do not really recommend doing that!

• I tried to update with windows and got the blue screen?

  Once the download is complete, I got the blue screen that makes the computer to restart. Once it reboots it works fine however in the lower corner
  to the right of the screen, I still see a yellow shield with black exclamation point saying "updates are ready for your computer" Please
  Click here for updates. The computer is a Windows XP and what I can do about it?

  Kind regards
  Ted

  Help us help you: start by reading this post 'sticky '...

  What information to post in the Windows Update forum
      http://answers.Microsoft.com/thread/1467f44b-ee27-4F7D-98d7-f1c4b35b3395

• tried to install a new copy of Windows XP Home. Everything is OK until the final phase, when the "blue-screen" appeared during the installation of the drivers.

  Installation of xp and blue screen of death

  Hello

  I recently formatted the partition boot and recovery of a laptop Medion2230, then merged the two partitions in a single NTFS partition.  Don't ask why, it's a long story.

  Then, tried to install a new copy of Windows XP Home.  Everything is OK until the final phase, when the "Blue Screen of death" appeared during the installation of the drivers. Restarted and installing XP as normal to repeat the first onboard staged and went to the "blue screen" at the same point as before.

  Using some diagnostic software, I reformatted the drive again, loaded XP set up and I had the same problem.

  Someone knows what to do?

  Thank you allionii123

  Now solved and pc with Windows XP home.

  Discovered a trick online, who said that at the beginning of XP installation, press F5, and this leads to a screen option - select 'standard pc' and continue with the installation of XP.

  (Again), formatted hard drive ran XP installation and followed above point.

  Worked the first time.

  Thank you very much for your advice.

  I think you can pressing F5 or F7...

  How to impose a layer of HAL during an upgrade or an installation of Windows XP

  Impose a HAL

  To prevent Windows XP to automatically determine the system HAL during the upgrade or installation of Windows XP, you can manually force in a system HAL. To impose an Abstraction Layer HAL during a upgrade or installation of Windows XP, follow these steps:

  1. During the phase in text mode of Setup, when you receive the message at the bottom of the screen, press F5:
     Press F6 if you need to install a third-party RAID or SCSI driver.

     Note If you press F7, the Standard PC HAL loads and the ACPI enforcement is bypassed.

  I would not need this except in the systems of many older and low end... :-(  After all, in the same article, for Standard PC they say: "the CPU can be a 386, 486, Pentium, Pentium II, or Pentium III '...

  Thanks for letting us know what you were doing.  Do you have all the necessary drivers after loading Windows XP?  I would not recommend using the default drivers for any hardware - always see what the manufacturer offers on their web page for each component of your system - card motherboard chipset, audio, video, network devices, etc.

• Blue Screen of Death. STOP error 0x0000007E + things I've tried.

  A bit of history. I run a MSI 890XM-G65 and the installation manual can be found at http://www.msi.com/service/
  I use a Radeon HD 6870 graphics card.
  A SATA HARD DRIVE.

  So. Since I got the BSOD (the o death blu screen), these are the steps I've tried:
  I started pressing F8 and tried to start a repair. BSOD appears.
  I started pressing F8 and tried "Run with the last configuration that worked", same thing.
  I changed my boot on CD/DVD in BIOS and tried from my Windows install disc, BSOD appears.
  I tried to delete my graphics (Radeon) card and attached monitor to the on-board, BSOD arises.
  I tried to use one of my RAM sticks GSKILL (two, distinct moments by themselves) and tried in different locations. I also borrow a new KINGSTON DDR3 ram friends and tried is separately, BSOD appears at reboot.

  I also went through the manual to make sure that all power cords are plugged in etc.

  The error is:
  STOP error 0x0000007E: SYSTEM_THREAD_EXCEPTION_NOT_ STOP 0x7E error means that a system thread threw an exception that the error handler did not. STOP code 0x0000007E may also display the SYSTEM_THREAD_EXCEPTION_NOT_ «»

  Hello

  References to Vista also apply to Windows 7.

  It's my generic how updates of appropriate driver: (look for the BIOS and driver
  updates.)

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on
  your system. For each driver in the list, additional useful information is displayed:
  load address of the driver, description, version, name of the product, the company that
  created the pilot and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit system Maker as replacements and manufacturer device which are the
  most up-to-date. Control Panel - Device Manager - Display Adapter - write it down
  and complete the model of your video - double click - tab of the driver card-
  Note the version information. Now click on UPdate Driver (this can do nothing
  that MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT it
  will update the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard
  If there are 3rd party with their own software and drivers and the other main device drivers
  you have.

  Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restore)
  and site (Realtek, Intel, Nvidia, ATI, for example) and get the manufacturer and device
  their latest versions. (Look for the system to update the BIOS, Chipset and software updates
  Site of the manufacturer here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN -.
  REBOOT after each installation.

  Always check in the Device Manager - drivers tab to be sure the version you are
  installation actually appears. This is because that some rollback of drivers before the
  later is installed (particularly that audio drivers) so to install a driver - restart
  -check that it is installed and try again if necessary.

  Repeat to the manufacturers - BTW to the device makers DO NOT RUN THEIR
  SCANNER - check manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using
  the above methods is preferable to ensure the latest drivers from the manufacturer of system
  and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable driver facilities
  in the updates of Windows, which leaves on Windows updates, but it will not be installed
  pilots who are generally older and cause problems. If updates provides a new
  driver then hide it (right click on it) and then go get new ones manually if
  you want.

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for the)
  Professional, comprehensive and Enterprise edition)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  ==========================================

  Tests of memory intercept all errors such as memory do not match (possible
  even for the Poles that seem identical) and when the faster memory is placed
  in the system behind the slower memory. So it is best to also swap sticks in and out
  to check for those even if all the tests of memory are not a problem.

  To test the RAM here control - run 4 + hours or so.<-- best="">
  www.memtest.org

  For Vista/Windows 7 memory diagnostics tool

  Start - type in the search-> memory box - find top Memory Diagnostics tool
  -Right click - RUN AS follows ADMIN instructions

  Windows Vista: How to scan / test your RAM or memory with Windows Vista
  Memory Diagnostic tool
  http://www.shivaranjan.com/2007/11/01/Windows-Vista-how-to-scan-test-your-RAM-or-memory-with-Windows-Vista-memory-diagnostic-tool/

  How to run the diagnostic tool memory in Windows 7
  http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Windows XP trying to update and get the error: another installtion progresses.

  original title: Windows XP, try to update and get the error: another installtion progresses.   That all before you proceed with this installation. How can I know what is the installation and the status?

  Windows XP trying to update and get the error: "another installtion progresses.   That completes before proceeding with this installation. "How can I know what is the installation and the status?

  Hello

  1. are you referring to Windows update?
  2 have you made changes on the computer before this problem?

  Please answer these questions and to provide more specific information on the issue. This could help us help you better.

  You can check the question in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  a. click Startand then click run.
  b. type msconfigand click OK.

  The System Configuration Utility dialog box appears.

  c. click on the general tab, click Normal Startup - load all device drivers and services and then click OK.
  d. When you are prompted, click on restart to restart the computer.

• I restart the computer and changed the BIOs to boot from the CD. So as usual, I'm prompted to press any key to start from the CD or DVD.

  Hello Comunity Microsoft :D My name is Mike and I built a gaming pc. Everything was going well for the first 3 days, but now I have a few crashes very violent. Speakers in loop and buzz and screen lock. I have to completely shut down to go back to a working state. I did everything I could possibly think of to solve this problem, but I can't.

  Then. on the problem. Today, I decided that I was able to solve all the problems by reinstalling windows. I had my keys together and put the disc in. I restart the computer and changed the BIOs to boot from the CD. So as usual, I'm prompted to press any key to start from the CD or DVD. I do and I get normal loading windows files, and at the end of this road, I get the Welcome screen in windows7 with no option and a fat slider. I don't have the little box that tells me that I can fix my computer or reinstall windows, NOTHING. I tried several times and received the same result<--(Insanity: root="" meaning...="" just="" saying)="" so="" i="" called="" windows,="" or="" had="" windows="" call="" me="" rather,="" and="" the="" tech="" says="" she's="" never="" heard="" of="" such="" a="" thing="" happening,="" and="" walked="" me="" through="" all="" these="" steps="" that="" i="" have="" already="" tried....="" still="" no="" help.="" so="" i="" am="" asking="" the="" community.="" has="" this="" ever="" happened="" to="" you="" and="" how="" did="" you="" make="" it="" work.="" and="" please="" don't="" post="" a="" list="" of="" regurgitated="" back="" log="" fix="" lists.="" rest="" assured="" i="" have="" already="" done="" it="" and="" failed="" to="" receive="" a="" different="">

  Just to isolate the problem, try to download a new copy of Windows 7, and then try again:

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

  Regarding problems with the computer itself, try to disconnect all nonessential equipment attached to it to see if the problem persists.

  I would also try switching around components such as modules of memory to see if the problem persists.

  I would also check to make sure that all components are mounted and installed correctly.

• photos has not been loaded for weeks (usually the browser chrome on PC windows at work).  I tried now on some other computers and get the same error message and I report every time.  can I do or just wait for someone to fix it

  photos has not been loaded for weeks (usually the browser chrome on PC windows at work).  I tried now on some other computers and get the same error message and I report every time.  is there anything I can do or just wait for someone to fix it?

  If you want any help here, you'll have to tell us what the error message.

  Which report you errors to?

• Satellite L840 - update of the BIOS and the blue screen

  Hello

  I recently bought a Toshiba L840-04f (PSK8LA - O4E007) and installed Windows 7 64-bit.

  Problem: BlueScreen

  Question: I guess it's the dreaded "blue screen of death' and I need to do something to prevent servious problems in the future (I used the laptop slightly for a few days with no problems).

  How to analyze the dump of information to find out what caused the blue screen?

  Or is it better to make it back in the last restore point before the blue screen event? A restore point was made until I updated the BIOS to v 1.80 to 6.20. In addition, Toshiba shows that there is a new version of BIOS 6.30.

  Before the blue screen event I had changed the setting of the 'close' button on/off and made some other minor changes to settings and then I connected a Seagate external hard drive just before the Blue error screen.

  Y at - it suggestions on what steps should I take?

  Thank you very much.

  April

  Hello

  The BSOD appears usually due to software problem or hardware problem.
  You said that you have connected an external USB HDD to the computer just before the BSOD appeared so likely the BSOD was caused by the attached HARD disk who knows

  If that happened for the first time, don't be afraid, maybe it's just a time issue
  But if he appears often, you should study some more and must try to reproduce the problem and the reason

• BIOS 4.03 for workstation xw9400 running windows 7 pro 64-bit

  None does not know where and how can I update the bios on a running windows 7 pro 64-bit xw9400 (HP does not list in the drivers section?) currantly only got bios V3.13 and im sure it should be on atleast v4.03?

  see you soon

  Oh well all good now, worked to followed her the road to iso cd and managed to update the bios to version 4.03.
  
  Once again thanks for the support...
  
  Concerning
  Chardsky...

• Just installed Windows 7. Windows udate watch 21 important security updates but they will install. I get the error code 80070539. Tried to install the updates but the shut down the computer, but the computer stops until they install.

  Just installed Windows 7. Windows udate watch 21 important security updates but they will install. I get the error code 80070539. Tried to install updates by shutting down the computer, but the computer stops until they install.

  Hello Tallydupp, welcome.

  Do you by chance have Google Desktop? Some users have reported interference problems in Winodws 7 while using an older version of Google Desktop.
  Try to uninstall it if it exists.

  Let us know what happens

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Outlook Express keeps trying to compact my messages. I'm unable to post messages and get the Error 0x800ccc0d code and I can not remove outlook Express

  Outlook Express keeps trying to shoot my messages several times per day.
  I'm unable to view messages in Outlook Express and get the code of Error 0x800ccc0d
  I'm unable to remove Outlook Express from my computer, I did not need it that I use Windows live mail.
  Any ideas on how to stop this nuisance.

  Windows Search is installed?

  You must tell Windows Search to stop indexing OE.

  In the control panel. Indexing Options. Change. Clear the check box for Outlook Express.

• Error blue screen STOP: 0x0000007e. I powercycled the sys, unable to choose for sure (keys do not work when you try to select a mode) sys is trying just to go back to the blue screen. Help, please

  STOP: 0x0000007e (0xc000001d, ox8537008 0xba4c3508 0xba4c3204) and the system would not come to the top.

  Error blue screen STOP: 0x0000007e. I powercycled the sys, unable to choose for sure (keys do not work when you try to select a mode) sys is trying just to go back to the blue screen. Help, please

  Symptoms: Booted computer, loaded the raid drivers and showed at the start screen XP for half a second then to BSOD with a Stop error Code 0x0000007E - see also a lot of users (0xC0000001D, 0 x-, etc.) as well.

  Solution:

  1 boot from your Windows XP CD and start the recovery console. You may need to press F6 while RC loads in order to load the SATA drivers. you will have a prompt c:\WINDOWS to the console.

  2. type: CD $NtUninstallKB977165$ \spuninst (it's the update, I had to uninstall to get out of the boot loop, other updates can be uninstalled by changing the name of the directory to $NtUninstallKBCODE$, where KBCODE is the code KB)

  3. type: BATCH spuninst.txt

  4. type: exit

  Don't forget to configure your system to boot from the HD before resuming. I hope this helps. Saved me a lot of hassle today.

  -Tom Steele
  http://www.hawkandtom.com Tom Steele

• I uninstalled the touchsmart from hp on vista and then tried the system restore, dad will kill me, how can I get the touch screen to work again?

  I uninstalled the touchsmart from hp on vista and then tried the system restore, dad will kill me, how can I get the touch screen to work again?

  Hello

  You have a specific question for HP, it may be better if you ask in the Forums of HP's Support.

  http://h30434.www3.HP.com/

  See you soon.

• Di Shutdown does not work, got the blue screen, beware, if it's the 1st time, etc., bios .updated .shutdown worked for awhlie, then got the same blue screen on another attempt to stop

  I had trouble with the fans so I unplugged everything, pulled out the memory and put it in. Shortly after received warning on a stop. I've updated the bios and things worked fine for one night. The following day I uninstaaled some programs and blue rebooted and got the screen again. I can right through the blue screen and sign, but have to stop with button / stop.

  Hello

  What is the exact error message on blue screen?

  This error message can point to a hardware or software that causes this problem. If the computer restarts after the Blue error screen, disable the automatic system failure restart option allows to capture the error message on blue screen.

  Check if the problem persists in safe mode and after the same return.