I tried to charge my iphone 4s, but has not loaded

Similar Questions

• X 1-charger (Kensington Absolutepower) detected but does not load

  Recently I bought a Kensington Absolutepower (http://www.kensington.com/kensington/en/gb/s/1717/absolute-power.aspx) as a replacement for the charger standard 65w which was delivered with my X 1.

  It seems to be compatible with other laptops Lenovo model X, and Lenovo are listed as a mark of support, but when it is plugged the X 1 does not load. The charger is recognized, (the familiar sound of the beep and the green light next to the laptop input lights upward when it is plugged) but does not not the battery. The machine is designed for the correct voltage setting, and all the Lenovo firmware is up to date. Someone at - it any suggestions or experience with this combination of product before I return the charger?

  Hello

  According to the following link: http://www.kensington.com/kensington/en/gb/p/1440/K38080EU/absolutepower%e2%84%a2-laptop-phone-table... the X 1 model is not compatible with the absolute Kennsington power adapter.

  Here is a list of the compatible models of the X series:

  X100e 3508 of X100e-2876 (L) (L) X 200 (L) X 200 Tablet X200s (L) (L) X200s (L) X 60 (L) X 60 compressed X60s (L) (L) X 61 (L) X 61 Tablet X61s (L) (L) X 201 (L) X 201 Tablet X201s (L) (L) X 300 (L) X 301 (L) X 301 (L)

• How can I restart my iPhone 5 c? I tried to connect to iTunes and that has not worked. Then I tried now the home and sleep/wake buttons simultaneously, but that no longer works. My charger works. What should I do?

  How can I restart my iPhone 5 c? I tried to connect to iTunes and that has not worked. Then I tried now the home and sleep/wake buttons simultaneously, but that no longer works. My charger works. What should I do now?

  Looks like a hardware problem (with your home button).  You should probably make an appointment with the genius of Apple on an Apple store near you.  This link can help:

  https://www.Apple.com/support/contact/ >

• Sync to iphoto with Iphone hangs on during synchronization. In addition the google map can be charged when I click on the places of Mediathek. Error message: "this page has not loaded correctly Google Maps. See the JavaScript console for more technical de

  Sync to iphoto with Iphone hangs on during synchronization. In addition the google map can be charged when I click on the places of Mediathek. Error message: "this page has not loaded correctly Google Maps. See the JavaScript console for more technical details. »

  Perhaps the reason for the problem of synchronization is the problem with the loading of google map?

  Error message: "this page has not loaded correctly Google Maps. See the JavaScript console for more technical details. »

  Apple has not renewed the contract with Google to access Google servers.

  If the old version of iPhoto, which are still using Google's servers for the cards and places are either crashing or hanging.  Places are only work in iPhoto 9.5.1 or newer, who use places of Apple servers.

  There is more support for iPhoto from Apple.  You must update iPhoto 9.5.1 with the Mavericks. It would work well, only it is no longer buying this update to Apple.

  Perhaps the reason for the problem of synchronization is the problem with the loading of google map?

  It is very likely.  If iPhoto work very well when you are offline, then your problems will be caused by the connection failed to Googles servers.

  See this: Bug: iPhoto 9.4 crashing when viewing the scene

• When I start my computer, it tries to find the solution center but can not be found how can I download this program?

  When I start my computer, it tries to find the solution center but can not be found how can I download this program?

  original title: Solution Center?

  I think that the solution center is a part of HP.  I go to programs - run and type msconfig.  Click the Startup tab and look for Solution Center, then uncheck the box so that it will not start then click on apply and restart the computer

  Or
  You can put in the HP printer drive and re install the printer that can also work.  Hope this helps

• Abdoulaye recently I received 3 important updates for my windows vista Home premium (my knees is dell inspiron), but he is not giving facility haven't faced error I tried to do one by one, but do not install it

  Abdoulaye recently I received 3 important updates for my windows vista Home premium (my knees is dell inspiron), but there is not installation giving error code (643). Even I tried to do one by one, but do not install it

  Hi HazemRagab,

  Failed to verify who has had updates to install. Follow these steps:

  Start, all programs, windows update, view the update history

  Follow the steps in the article.

  http://support.Microsoft.com/kb/976982

  Reference: http://support.microsoft.com/kb/2545723

• rpet installed iOS app "charged hydrated: application" but does not load

  Hello

  I installed my phonegap build app on my iPad.  rpet installed iOS app "charged hydrated: application" but does not load.  Keep saying please wait on the black screen.

  Any ideas of how to debug this problem?

  Thank you!

  First, find out if it's a problem of hydration.

  Turn off moisture, rebuild and install, then launch the application. It remains only to display and clear the screen?

  BTW: Be aware that configuration changes are ignored as long as hydration is activated during the generation.

• I tried several times to contact support, but have not been able to get well. I wanted to try the room light I use Capture 1 now. The Downloader or installer will load only if I "Run as Administrator" and then it crashes every time within a few secoun

  I tried several times to contact support, but have not been able to get well. I have a trial (try actually the second time), but are not yet able to test Lightroom/CC. I wanted to try the room light I use Capture 1 now.

  My question is this: the Downloader or installer will load only if I "Run as Administrator" and then it crashes every time in seconds. I even tried the Adobe application that will go well and remove all the remains of the previous software hoping that he would, but no solution. It will continue to act as his footstool, consumption of RAM, but do nothing else than the loop on the same screen. I have to force quit the program so that he could even respond. I'm a little confused on where to go with it. Thank you!

  Windows 10, 16g RAM, 4.7 GHZ 8-core AMD AMD R9 270 X

  Check your hosts file.

  help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• Diagnostics network ping to the remote host, but has not received a response

  I'm trying to figure out if there is a problem with just my laptop not wanting to connect to a local free WiFi, so any help is appreciated. He worked two days ago only to stop abruptly last night.

  Windows Network Diagnostics comes back with the error message "Can not contact www.microsoft.com (65.55.12.249)" and "diagnostic network ping to the remote host, but has not received a response.

  The only repair option it evokes is ' reset NIC 'wireless network connection ' '.

  I can always connect to WiFi using my iPhone, and even a connected laptop computer work Companion. Yet once, if this can be fixed on my end, any help would be appreciated.

  Hello BrenJones,

  Thanks for posting back. DNS servers are controlled by your ISP. I communicate with your Internet service provider and confirm that you have the good DNS for your network.

  Hope this helps J

  Adam
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Plugged in, but does not load?

  My g6-2116nr Pavilion is only 3 months ago, but it will not load. While it is plugged in, it says that it is plugged in, but do not load. the only way so he could start charging is to let the battery run out and load it then (I don't let not run out on purpose). Occasionally, while it is fully charged, it also won't tell when the battery is down, and it will be a strange ammount of supposed autonomy (it will say that it has 130 hours of battery life, which it doesn't). Can someone help me?

  Hello

  First, shut down the laptop, unplug the power adapter, remove the battery and then hold the Power button for 30 seconds.

  Now, plug in the AC adapter without the battery inserted, start Notepad, open windows control panel, open Device Manager, expand the entry for the battery, on the right, click on and compatible Microsoft ACPI control method battery and select Uninstall - do uninstall not something else here.  When the uninstall is complete, shut down the laptop, unplug the AC adapter, reinsert the battery and then start the laptop's battery.  Windows will automatically reinstall the driver - leave Windows running for a few minutes. Shut down the laptop again.  Now plug the power adapter (with the inserted battery always) and start the laptop to see if it helped the issue at all.

  Kind regards

  DP - K

• Software for printer C410 starts but does not load.

  Software for printer C410 starts but does not load.  Using Windows 7 Home Premium SP1 on a Pavilion HPE-140f. Click on install and the process starts, goes in all the scans and the two notations. When I click on load it just goes dead and will not charge.

  Try to run the installation once more

  Once to reach the license not agree, click on the link 2 (use of connection Internet

  Make sure that both options are defined as no, thank you, approve and proceed with the installation

  You see no progress

  If the same appears, please specify whar you are which means by "going dead" - is there a specific error message?

  Specify as detailed as possible, a screenshot can help to understand better as well.

• Push leads to SFDC when the contact opens an email but has not clicked

  Hello world

  I have to push leads to SFDC when the contact opens an email but has not clicked. I have a program generator that updates the CRM. How my canvas campaign looks like so I can push should conduit who opened an email but fact not clicked and dimension as 'Normal '? Should I create another program for this generator? Thank you!

  OK, looking at your detailed requirement, I think it's more that just to have two separate lists because you will also need to update contact record to see who has clicked and opened etc... (unless someone of other comments on this subject and provides a simple solution here).

  I suggest you explore approach to lead scoring. I think it would be much better option to have to go through sharing lists / route filters.

  Top scoring model, you can define the criteria of open clicks vs and give them scores... In the future, you can add additional criteria too for example if the person has submitted a form, visited a web page or a landing page of Elqoua etc. For each criterion, you can set specific scores... You can find information about the partitions of lead here... Eloqua10 drive rating Resource Center (there may be more available resources, so research topliners).

  It may take time for you if you are not familiar with the notation of lead but will future proof solution.

  If it helps at all then the way we manage click and opens with a form blind on the clicks... so whenever the user clicks on a link in the email they are passed through a form unknown / hidden and on the form, there is normally a specific value that identifies them as users click to get these users to SFDC straight on a daily basis.
  Then opens (excluding clicks) is learned separately and we normally and loaded separately (depending on budgets of telemarketing etc.). Having said that we are also developing implementing lead scoring model.

  I hope this helps.

  PS: on your question about food... Yes, it is basically adding members to a step... using the charger, you can automate the process. You can find create option charger at the top right in the program (as members).

• When a sample plugin based, but does not load

  Is there some common reasons why a plugin of the sample (in this case, CS6, Mac OS X 10.11, Xcode 7) will build without problems but does not load in Illustrator? In this case, I am a student in MultiArrowTool, but it will not load. I have not found any place where I can set a breakpoint to see where it fails, so it seems that AI CS6 rejects before even any code. At first I thought she might need a separate UI installed, but none was provided with the sample project. Any suggestions would be much appreciated!

  Have you tried to put a breakpoint in PluginMain in Main.cpp? If the plugin fails silently, it is normally because this function returns an error code when it receives the startup message.

• Fire fox is slow and on a single website, it goes on the site but will not load the page

  Fire fox is slow. Also on a single Fire fox web site goes on the website but will not load the page
  Questions began Tuesday, June 16, 14. Website can be opened with other browsers.
  I am running windows XP sp2

  Start Firefox in Safe Mode {web link}
  While you are in safe mode;
  Press < Alt > or < F10 > to display the toolbar.
  Followed;

  Windows; Tools > Options
  Linux; Edit > Preferences
  Mac; name of the application > Preferences

  Then Advanced > General.
  Find and stop using hardware acceleration.

  Dig safe web sites and see if there is still a problem. Then restart

• Firefox is not fully load site Barclaycard of authentication. It load regarding the demand for certain letters in my password but does not load the button 'Submit', so I can't continue with my purchase and I switch to IE8 browser to buy whatever it is ov

  Firefox is not fully load site Barclaycard of authentication. It load regarding the demand for certain letters in my password but does not load the button 'Submit', so I can't continue with my purchase and I switch to IE8 browser to buy anything on the internet. Clues?

  This has happened

  A few times a week

  Is a few weeks ago

  Your UserAgent string in Firefox is totally messed up by another program that you have installed and Barclays does not know you use Firefox 3.6.6 - it is probably similar to IE 6.0 on this site.
  http://en.Wikipedia.org/wiki/USER_AGENT

  type of topic: config in the URL bar and press ENTER.
  If you see the warning, you can confirm that you want to access this page.
  Filter = general.useragent.
  Preferences are "BOLD", a line at a time, and then select reset, right click
  Then restart Firefox