I tried to repair the boot from the windows installation disc, but it displays error bcd

Similar Questions

• My computer will display the BIOS boot screen then do nothing yet, I insert the Windows installation disc. What should I do with it?

  My computer will display the BIOS boot screen then do nothing yet, I insert the Windows installation disc and I press F11, 12 > no response, F10 > BIOS Setup. What should I do with it?

  Brand: HP
  Type: laptop
  Model No.: Pavilion zt3000
  512 MB DDR1 RAM
  Thank you very much!

  Hi Dominic,

  Are you able to get into BIOS to make changes?

  If so, you can try to reset the default settings of the BIOS and check.

  NOTE: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  You can also try to remove all external usb devices that can be connected to the system and start-up and see if the system boots.

• I tried to install the suite 5.5, but get an error of activation to come?

  I tried to install the suite 5.5, but get an error of activation to come?

  I don't know no creative licenses that cloud never expire.

  first of all, check once you have entiring your serial number correctly.  If you are sure you are, contact adobe support: http://www.adobe.com/support/chat/ivrchat.html

• "WindowsUpdate_80070641" "WindowsUpdate_dt000"_"WindowsUpdate_00000641" "WindowsUpdate_dt000" __Windows could not start the Windows Installer service on computer local error 216:0xd8

  I have a 64 bit Windows 7 PC and cannot install updates.  Here are two screenshots.

  One contains two error message that I get when trying to update

  "WindowsUpdate_80070641" "WindowsUpdate_dt000"
  "WindowsUpdate_00000641" "WindowsUpdate_dt000"

  The second erorr is what I get when you try to start the Windows Installer Service.

  Windows cannot start the Windows Installer service on computer local error 216:0xd8

  I follow several steps that are listed in the web pages of solving problems.  Tried to make own reboots, use the Microsoft Fix and it does not detect any problems.  I tried to install Windows Installer 4.5 and I get a message telling me that this update is not applicable to your computer

  Please notify

  See if this ad helps-

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/213770d0-e94b-43B4-9ff6-99e6366b556b

  TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• I want to format my hard drive to start over but I do not have the windows installation disc. How can I reinstall the pack without the disks after I cleaned the system?

  Resettlement without disks

  Hello. I have a computer bought from a friend with windows vista home premium installed. I want to format my hard drive to start over but I do not have the windows installation disc. How can I reinstall the pack without the disks after I cleaned the system? Thank you, Kim

  Hello. I have a computer bought from a friend with windows vista home premium installed. I want to format my hard drive to start over but I do not have the windows installation disc. How can I reinstall the pack without the disks after I cleaned the system? Thank you, Kim

  You have a hard drive partition to do - but you would need to contact/see the FAQ from the hardware manufacturer (HP, Dell, Gateway, Lenovo, etc) to see if and how.

  Otherwise - you might have to order (pay for possibly) the factory restore/recovery of the value of the manufacturer.

  http://www.ZDNet.com/blog/Bott/lost-your-Windows-discs-how-to-get-replacement-media-legally/4320?tag=nl.E539

  If it was built * friend *, you will communicate with them.  Ask your media.

• error message trying to reinstall Java. tells me that the windows installer is missing a DLL error #1723

  My Java file must have been corrupted, but all of a sudden I can't play.  I have uninstall and when I try to reinstall I get afficherapres message "#1723 that there is a problem with the Windows Installer package. A DLL required for this install to complete could not be run.  Contact your provider staff or the support package!

  I also received his message - Launch4j - makes registry reference to a nonexistent Java Runtime Environment installation or the runtime is corrupted.  The system cannot find the path specified

  Help!  I tried to download the version of Windows Installer 4.5, but the website tells me that I don't need. I thought that the download would overwrite what is installed on my computer and load the missing file!

  Not sure if it is a Java problem, a problem Windows or Firefox...

  Help again!

  I've corrected the Launch4J message by changing the values of JavaSoft registry keys:

  Start RegEdit
  Open this key HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Development Kit
  Expand void keys and change all values your current value of JAVA_HOME JavaHome.

  If you have installed the Java SDK in C:\Program Files\Oracle\6 then use this value "C:\Program Files\Oracle\6".
  If you have installed Java Runtime Environment in the C:\Program JRE, then use the value "C:\Program JRE.

  You might be able to open a DOS command window and run this command to find the current path of Java:
  JAVA_HOME %Echo%

  Chris.

• Vista \Windows\system32\winload.exe is missing, how can I get the Windows installation disc?

  I have a HP Pavilion dv6500 Laptop, I'm trying to restore my system, but the system wants to use a Windows Setup from disk because my windows/system32/winload.exe could not be loaded"status: 0xc000000f Info: the selected entry could not be loaded because the application is missing or damaged. »

  The windows installation is located in the machine, and apparently the recovery has not copied as part of the recovery disk.  I tried to identify if a recvery kit was available and it seems that maybe not.  What must I do to fix this?

  Have you tried to type the F11 key immediately after switching on the laptop. This should start in the hard disk partition recovery.

  You should be able to order by phone recovery disks. If you are USA / Ca... 1-800-474-6836

• I ve tried to get the windows icon 10 but it goes up to 99% and then again never getting to 100%

  * Original title: updates-windows7 professional and windows 10.

  I installed windows 7 Professional on my pc. ASUS x54c but now I can not get more automatic updates. Ive also tried to get windows 10 icon but it goes up to 99% and then again never getting to 100%, I tried everything I see no chance. can someone help me.

  If the Upgrade Wizard of Windows 10 becomes blocked or unresponsive to 99%, wait at least 4 to 7 hours. If the installation program does not progress, close the wizard and restart your computer. Follow the instructions to upgrade manually by using the tool of creation of media or file ISO for Windows 10.

  If you encounter an error about enough space to perform the upgrade, see the instructions:

  How to install Windows 10 on devices with limited space

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: 10 things to do if the Windows 10 install fails.

  Retry the upgrade manually:

  Option 1: Using the media creation tool

  Download the media creation tool

  Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

  

  Note: How to check if you are downloaded or installed the update Windows 10 November

  Select upgrade this PC now and then click Next

  

  Option 2: upgrade using the file ISO for Windows 10.

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader). You can do so from the Device Manager.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
  • Support your default BIOS reset BIOS.
  • Check if there BIOS updates available for your system, and then to apply them.
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a USB device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.

• the Windows installation (repair) does not work on a normal mode due to the error on blue screen and I can not access a SafeMode more due to the installation of windows

  Hi everyone, my dell inspiron 6400 does not work in normal mode due to a blue screen error 0x0000007E, 0xB8D4278E, 0XBA4CF038 and 0XBA4CED34. It also shows an error igxpmp32.sys. Unfortunately, I complicated issues when I tried to fix it by using a windows installation disc. Now, windows setup wont run on normal mode the blue screen still exists and I can't use safe mode again as custom configuration windows running on safe mode. Help, please

  Hello

  -Don't you make changes to your computer because of which the question began?

  I would recommend that you disconnect all external devices and third-party drivers such as mentioned in this article and check if the problem persists.

  How to troubleshoot a Stop error 0x0000007E in Windows XP

• "Error 1719. Able to access the Windows Installer Service"when you install programs.

  After spending the last week every night trying to get some software installed (and of course the search for remedies in probably all available forums), I let go and post this request for assistance. But first my story:

  I have lived the last week suddenly my Neat Receipts software does not recognize my scanner more. Trying to reinstall the software, I came across the error that Windows Installer could not be started. That's when I started first for solutions. I was surprised how many solutions I found (but more redoubled practically the same thing), but none did it for me. At this point, I was always under the assumption that it is a problem of the Neat Receipts software.

  Then after another night of frustration I could not pass my trial version Office 2010 plus a sort of license error. I was a little surprised that the trial version which abruptly ended without giving me the opportunity to enter a license key (I got wrong), but doesn't bother too much because I liked the product and had noticed last week as well as Office 2010 is already officially released and I decided to buy it. After spending about $300 and a successful upload, I tried to install it.

  And here my saga continues. First I got the message that I couldn't upgrade my trial version and need to uninstall. Uninstall with the uninstaller routine does not work (windows error message install), but I could uninstall it using the Windows-Install-Clean-Up utility. Now, I can start the installation process, but after being nearly halfway through the installation, I again get the error of Windows install the Windows Installer Service cannot be accessed (Error 1719). It is roughly the same error that I got at the beginning, when I tried to reinstall the software, Neat receipts. So, it seems not to be a misapplication of Neat receipts or Office 2010, but a windows problem.

  The frustrating thing however is that after spending all hours searching online for solutions, the only thing I've discovered is that I am in good company (i.e. There are many others have reported the same problem), but none of the solutions work. Just to be safe, do not for get the same Advisor I tried already several times, let me enumerate what I've done so far:

  1. I am logged on as administrator

  2 - I started the Windows Installer service

  3 - I ran SCF /sannow (no problems found)

  4. I not saved and re-entered the msiecec with / opt and/regserver. I did so explicitly for BOTH (!) msiexec programs, one in the system32 folder and the one in the sysWOW64 folder

  5. I tried to repair Windows 7 boot from the windows 7 installation DVD and run the option repair (no problem found)

  6. I tried to pass the parameter registry WOW64 (for MSIServer) from 1 to 0 (I found this in one of the suggested solutions) [and later again back to the original value 1]

  7. I tried to 'force' windows to ignore the msiexec for 64 bit (in the system32 folder) by renaming and by identifying the msiexec for 32 bit 9 in the sysWOW64 folder) and update the path regsever C:\Windows\system32\msiexec.exe \V to C:\Windows\syswow64\msiexec.exe \V

  8 - I disabled my firewall and antivirus

  9 - I did everything above in many variations with reset (both the save option - reboot)

  -in fact, I could do things more I can't remember.

  Unfortunately a recovery is not an option most, because I guess I tried too many things and my view of the possible return is a point in which my computer was already in place...

  I tried to involve as well a representative of Microsoft support explaining my dilemma, but only made e-mail a generic response on this same forum (great customer service!).

  While I was actually pretty happy in the last 4 months with my new Windows7 (and thus Office2010), I am now reaching the point where I fell like throwing finally the towel and kiss goodbye to Microsoft. I was seriously considering to move to Apple before decide me in February favor some cheaper hardware to continue with Microsoft and the new Windows7. But this experience not being able to fix my computer after spending nights in the search for solutions and not be able to get support from Microsoft disgusts me.

  Now I wonder if there is someone out there who could help me out here...

  Of course, the .msi applies only to installers .msi, which was my mistake for which I apologize.  Regarding a clean installation, the fact remains that you have faced this anomaly for several days, a clean install, despite the pain, would be a distant memory now.  This is my personal opinion, not Microsoft, they me disavowed a long time ago, in all cases MVPS have nothing to do with Microsoft, although the price is published by Microsoft, it is awarded for the caregiver, or in this case try to help others.  It is good that I can at least allow you to vent, it's better out there that maintenus kept bottled upward, no matter how hard it seems to fix the problem, it will be resolved in your favor by subsequently, one way or the other.

  In pursuing the side of permissions of things you can try that if you wish.

  This example may or may not work for you, with your program?

  "It seems that the"Run as Administrator"command gives you administrative privileges only, and they are not enough to install Java (and OpenOffice, by association). To work around this problem, you must actually connect to an administrator. Open a command prompt with admin rights by clicking Start, type cmd in the search/run box, hit CTRL-SHIFT-ENTER. At the prompt, type:

  NET user administrator / Active: Yes

  Then disconnect from your regular account and record as an administrator, you should be able to install the program. When you are finished, open a session to your regular account and, for security reasons, disabling the account administrator for assistance:

  «net user administrator / active: No.»

  http://user.Services.OpenOffice.org/en/forum/viewtopic.php?f=15&t=11706#p55879

  See if this program you can tell what is happening with the failure of the Office to install.

  Process Monitor v2.8
  http://TechNet.Microsoft.com/en-AU/Sysinternals/bb896645.aspx

  Process monitor Forum
  http://Forum.sysinternals.com/forum_topics.asp?FID=19

  Need tutorial for Process Monitor
  http://Forum.sysinternals.com/forum_posts.asp?tid=13724

  If it was purchased through the Office Online web store?

  If so, you may need to return to this site at http://office.microsoft.com/en-us/products/ click on the link buy Microsoft Office 2010 today.   Then click on the buy now button to your product...  When you arrive on the "Items in your shopping cart" page, look for the link to the FAQ at the top of the page.  Click on FAQ.  When it opens do scroll to 'Customer Service '.

  Customer support

  What is your refund policy?

  Microsoft products purchased through the Office Online web store are eligible for return within 30 days of the purchase date. Taxes paid will be refunded on eligible returns.
  Among the exceptions to this return policy: Microsoft backup CD/DVD are not refundable and are not included in our 30 day guarantee.

  How can I request a refund?

  To obtain a refund for digital product please click here {web page link} to access your order history information. Click the Order Details of the order for which you want to request a refund. Use the option «back»

  When will be the reimbursement of the credit?

  Your refund credit will appear on your credit card within five to seven working days after we receive your letter filled with destruction. If a different payment method has been used, the duration can vary.

• Tried to migrate iPhoto for pictures.  Was a success.  However, a week later, he said now that the library could not be opened.  "Photos has attempted to repair the library" photo library ", but is unable to open it?  Ideas?

  I tried to migrate iPhoto pictures, after the upgrade to OS10.  Was a success.  However, a week later, he said now "the library could not be opened.  "Photos has attempted to repair the library" photo library ", but is unable to open it. "Given the size of my libraries, I have every living on external drives, so I don't know if it's part of the problem, but it's strange because it worked last week.  Ideas?

  Given the size of my libraries, I have every living on external drives, so I don't know if it's part of the problem, but it's strange because it worked last week.  Ideas?

  How are your external drives connected?  Are mounted locally or network drives?

  And what is the file system on the external hard drive?

  You open the library from another user or another Mac account?

  You run applications cleaning to save space?

• At the opening of the library of photos, each photo turn the black thumbnail and so that to open it.  Preview also does not have photos properly.  I tried to repair the library and this did not help.  Help, please!

  At the opening of the library of photos, each photo turn the black thumbnail and so that to open it.  Preview also does not have photos properly.  I tried to repair the library and this did not help.  Could this be a problem with the RAM? Help, please!

  Check, if pictures can access the original files of your pictures, or if the originals are missing.

  You can test to try to edit a photo or trying to export it with "file > export > export original file..."

  Photos can be edited or exported?

  Shooting Raw or JPEG?  Where your photo library is stored? On an external disk or in your pictures folder?

• Cannot boot from the Windows 7 installation DVD. Error when installing XP "this installation disc is not compatible with your version of windows. To upgrade, you need the correct installation disc.

  Please help me

  Why my cd not DVD boot? will have a difficult time install my win7 home ed I have xp and the note ""this installation disc is not compatible with your version of windows. " To upgrade, you need the correct installation disc. For more information, see your computer system information. To install a new copy of Windows, restart (boot) your computer using the installation disc, and then select custom (advanced option). "always keep flashing... I already did your post, but I cant stand dvd always turn to windows xp? and my driver working I just installed win xp months ago

  Hi the prey,

  ·         What is the brand and model of the computer?

  You should check the settings of the computer BIOS (Basic Input\Output System) to boot from the CD/DVD. Check the manual or the support of the computer Web site for the same.

  Note: Be careful when you change the BIOS settings. The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly.

  Run the Windows 7 Upgrade Advisor to see if your computer is compatible to install Windows 7.

  Windows 7 Upgrade Advisor - download - Microsoft Windows

  See also:

  Installation and reinstallation of Windows 7

• My creative cloud cannot happen on the adobe servers and when I tried to repair the host file using the creative cloud cleaning tool, it displays Error occurred while setting entries HF: 5

  My creative cloud cannot happen on the adobe servers and when I tried to repair the host file using the creative cloud cleaning tool, it displays Error occurred while setting entries HF: 5

  Please let us know your operating system.

  Concerning

  Megha Rawat

• I tried to format the C drive and then reinstall Windows Vista using the windows reinstall disk but I couldn't start in it.

  * Original title: reinstalling Windows Vista

  I tried to format the C drive and then reinstall Windows Vista using the windows reinstall disk but I couldn't start in it. I restarted my computer, press the F12 key and selected boot from cd/dvd, but the computer still started in windows. My computer is Dell. If there is no solution, it is possible to reinstall windows without using the disc?

  Hello

  Here are the options of relocation:

  How ro reinstall from the Dell recovery partition:

  http://www.Dell.com/support/troubleshooting/us/en/04/KCS/KcsArticles/ArticleView?c=us&l=en&s=BSD&docid=DSN_336966

  Reinstalling the printer Dell supplied disk:

  http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?c=us&l=en&s=DHS&docid=DSN_339949

  ______________________________________________

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.