I tried to set up a homegroup, but the system cannot see each other.

Similar Questions

• What is a substitute for the migration assistant? I tried in vain for three hours to migrate files from a macbook pro to each other so that even if connected with the ethernet cable the computers never see each other.

  What is a substitute for the migration assistant? I tried in vain for three hours to migrate files from a macbook pro to each other so that even if connected with the ethernet cable the computers never see each other.

  You can connect otherwise?  USB or FireWire or love at first sight?  You can connect both machines and start the one you want to transfer to target disk mode.  If your other machine is up and running with an account on it and you just want to move files, you can simply drag and drop the FRO the machine mounted TDM, or you can use the migration wizard.

  Or, if the other machine still starts and runs, you can start both computers and connect to the same wifi network and share the hard drive like machines on the network.  Access them in the finder on the new machine files and drag-and - drop, or use the wizard migration, on wifi.

• Windows 7 Home premium network problem, computers can access the internet, but they do not see each other on the network

  I was trying to set up a homegroup on my main computer, but on the second computer, I never had the opportunity to join the homegroup. I'm sure that I have everything set up properly, but I can't get the second computer to join.

  I have a switch that my internet runs and a cat cable goes to each computer. Each computer can access the internet without any problem, but none appear in other network list. They have the same name of working group, I just can't understand it. I use Windows Firewall.

  Any help would be greatly appreciated.

  Maybe this can help.

  ----------------------

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  ------------------------------

  If your network consists only of Win 7 and you want a simple network, use it.

  http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup

  After you have configured the homegroup, scroll to the bottom for the Permission/security section.

  -----------------------------

  Win 7 networking with other version of Windows as a work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have authorization and security problems, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  ---------------------

  *** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• When I am on messenger I continues to disconnect and I can't video chat. I can see the person, but the person cannot see me.

  as I have said, I continue to disconnect from windows Messenger and video chat does not work. I can see the person and they can't see me.

  Hello

  ·         You get the error message?

  ·         What version of windows messenger do you use?

  ·         Have you updated the drivers for your sound card, video card or Web camera?

  ·         Have you tried to add your webcam to the conversation, adding audio?

  ·         What kind of camera do you have to Web?

  ·         This problem occurs with just a touch or all contacts? »

  Step 1: Check the video configuration in windows messenger.

  (a) start Windows Live Messenger and sign in.

  (b) prior to connect to anyone, open the menu "Tools" then click on "Configuration video / Audio.

  (c) perform the tests and click on 'next' and confirm the webcam is the video display and then click "Finish."

  (d) prior to connect to anyone, open the menu 'Tools' and then click 'Options '.

  (e) select "Personal" and put a check mark next to "Webcam - enable others to see that I have a webcam".

  (f) click on 'Apply' and then click 'Ok '.

  (g) sign out and completely EXIT Windows Live Messenger to save the new settings.

  Step 2: temporarily disable the security software and check if it works.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  If this does not work, I suggest you to visit the following site to get help.

  http://windowslivehelp.com/forums.aspx?ForumID=568c1adc-41d2-47E0-BB2C-cdfedd9642ef

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• 5110 printer wireless but the software cannot see the IP address

  Hello. I have a new printer Photosmart 5110. I turned on and it found my wireless network. I entered the key wireless and got an IP 192.168.1.68 and connected is displayed.

  I have an ASUS Netbook. It doesn't have a CD player, so I had to download the HP Photosmart installation software. I am running XP. When I run the installer, it asks if I have a printer connected wireless network. I enter the IP address and the message says printer not found.

  I use a BT Home Hub. When I log on the hub I see the printer and IP address.

  I can ping the IP address of the laptop.

  I can access the printer directly using Internet Explorer and entering the printer IP address - and I can print a test page with success.

  I have Norton Security and I turned off the firewall.

  I can't get the installation software to see the IP address of the printer.

  Don't you think that there is a problem with Norton blocking the IP (if so, how unlock) or something to the BT Hub?

  Can you help or give ideas I can try before I bring her to the store.

  Steve

  Hello Steveargy,

  you have the tray to run the network diagnostic utility? If this is not the case, can you please do?

  I hope this helps

  Best regards
  F.

• I want to send a gift to a friend, but the system refused and asked me to contact support. Why can't I make a gift to him?

  Today, I send a gift to a friend with $ 25 and I tried to send another 100 dollars but the system refused and asked me as a result of the support

  If you try to pay with a credit of the iTunes Store, you can't. If not, click here and ask.

  (143307)

• Trying to connect to a homegroup, but I need to activate IPv6.

  Trying to connect to a homegroup, but I need to activate IPv6.

  Hi SteinarDahle,

  Do any error message when you try to active IPV6?

  Method 1:

  a. right click on the network icon

  b. Select Open the network and sharing Center.

  (c) in the window that appears, select "change the map settings.

  d. in the network connections window, select the 'connection to the Local network' for the interface NETWORK integrated (or whatever it's called), then "change settings of this connection" or file > properties.
  e. in connection properties page, check the box 'Protocol Version 6 (TCP/IPv6) Internet'.

  Method 2:

  Click Start and type this command in the start search box:
  NCPA.cpl [Enter]
  Right click on the Ethernet connection or wireless you are troubleshooting.
  Select properties and acknowledge the UAC quick.
  Verify IPv6, and then click OK.

  Hope this information helps you.

• Hi im trying to media share with my ps3 and have two devices see each other, but my wmp allow me to click the allow for the sony device what can I do

  Hi im trying to media share with my ps3 and have two devices see each other, but my wmp allow me to click the allow for the sony device what can I do

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?

  Take a look at the following article that may help you.

  http://community.us.PlayStation.com/message/2371488

  I recommend you contact Sony support teamfor further assistance.

• on windows xp, my system restore to a previous restore point. have you tried many restore points & creating new ones but the system does not restore. all the solutions out there?

  on windows xp that my system restore to a previous restore point, I tried many restore points & created new ones but the system displays "could not be restored", any help out there.

  Let see... What do we know about your system environment:

  It's windows xp.

  If we knew more, you would probably now.

  What is the problem that you are experiencing this thing you System Restore will be remedied?  System Restore is not a time machine.

  The system restore already worked successfully in the past?

  Thank you MS Answers, allowing the resolution of simple problems like frustrating and a lot of time as possible by asking only not for any information system when a new question is asked.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  If the system works, what do you think might have changed since the last time it did not work properly?

  Some tools Anti Virus 'protect' your system so that they will not allow a restore of the system work properly.
  For example, if you use Norton/Symantec products, you will see a message like this:
  Restoration incomplete. Your computer cannot be restored...
  It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:
  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013
  According to what you use for malware protection, you may need to disable the product temporarily, do the system restore and then turn the products light up again when the system restore is complete.
  Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore.  Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore.  It works for some configurations.
  System Restore is sometimes so afflicted or Restore Points are suspicious, the best solution is to reinstall your system restore.  This will remove the old Restore Points, but sometimes it's the only way to fix a broken system restore.  You don't have to reinstall XP, only the part of system restore.
  That can leave you with your problem of unspecified origin that you hope the system restore will fix (using a system restore is usually not equivalent to fixing the problem though).
  Give these ideas some consideration if they apply to you.
  Sometimes malicious will afflict your system restore to prevent you to find and remove malware.  It would much rather you trick into thinking that you need to repair or reinstall your XP when it is not necessary.
  No matter what you use for protection against malware, I do so and then only begin to solve any problems:
  Download, install, update and do a full scan with these free malware detection programs can solve any problems:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  It can be uninstalled later if you wish.
  The scans by operating clean, reboot, test and we can fix any other issues.

• Windows found driver software for your device but encountered an error trying to install it. The system cannot find the specified file.

  Original title: Windows encountered a problem installing the software driver for your device...

  Arrrrgh!  Had a terrible time trying to get the scanner function works on my Epson Stylus CX7000F.

  I get the too common but seemingly irreparable "Windows has encountered a problem installing the software driver for your device...". Windows found driver software for your device but encountered an error trying to intall it. The system cannot find the file specified. "

  The job of printer/copier/fax end but not go on the scanner.

  I tried the 'fixes' to epson.com repeatedly with no luck.  This includes their reccomendation uninstall/install several times, trying even to this process in safe mode and clean boot the.

  I ran the program to 'fix' Microsoft ATS with no luck.  It has detected the error and said that the problem has been resolved, but guess what?  No, it isn't.

  I clicked on install update driver/driver from Device Manager.

  I tried the work around, eliminating the "LowerFilters" of the registry.  Guess what?  You have it, no luck.

  So, before I go and buy a new printer/scanner, with no guarantee that they will work.  Does anyone have another suggestion?

  I am running Vista, 32-bit.

  You can also try and replace or install the ntprint.inf file.

  I had a similar problem on a Windows 7 PC and noticed that this file was not present.  I just copied the file from a different PC Win7.  The printer, I tried to install was a Brother MFC-J410w.

  The file can be found here C:\Windows\inf

  Hope this helps someone.

• I tried to buy adobe first pro, but the payment information page does not load

  tried to buy adobe first pro but the payment information page does not load, I left open for a while, given market and nothing.  Anyone else having this problem?

  [transferred to The Adobe Creative cloud of mod]

  Hello

  Please try to change the browser, or clear the cache, and then try again.

  Kind regards

  Shelly

• I had to change my computer (too slow), I'm trying to reinstall Adobe Acrobat 9 Pro. I have a serial number that is not an upgrade, but the system ask me a previus serial number which I don't have

  I had to change my computer (too slow), I'm trying to reinstall Adobe Acrobat 9 Pro. I have a serial number that is not an upgrade, but the system ask me a serial number previus wicht I did not

  Acrobat 9 pro serial number you use is an upgrade by also the installer would not be asked to select the previous (for example, acrobat 8) version.

  If you are allowed to choose acrobat 7 as the upgrade, you may be able to use the serial number, error: "Activation Server unavailable". CS2, Acrobat 7, pass a hearing 3

• I was converting pdf to word. I tried to download multiple documents, but the system froze.  I closed the Acrobat Reader. Now, I see no export tools more.  I even tried to restart the computer.  I am currently with my account.

  I was converting pdf to word. I tried to download multiple documents, but the system froze.  I closed the Acrobat Reader. Now, I see no export tools more.  I even tried to restart the computer.  I am currently with my account.

  Hi bulldogcl1,

  Please perform this cleanup tool to uninstall the reader Download Adobe Reader and Acrobat cleaning - Adobe Labs tool, reboot your system & install the latest Adobe Acrobat Reader DC Acrobat Reader DC Learn & support , sing with your Adobe ID to use the export to service PDF format using Acrobat Reader. Export PDF to Acrobat Reader DC.

  You can also use this online https://cloud.acrobat.com/exportpdf service

  Let me know if it solves your problem.

  Kind regards
  Nicos

• I have a new computer with Windows 7 Professional, Office 2007, Adobe XI. I just created a word document and tried save it in PDF format, but the PDF option does not appear in the menu dropdown. Any ideas please? Thank you.

  I have a new computer with Windows 7 Professional, Office 2007, Adobe XI. I just created a word document and tried save it in PDF format, but the PDF option does not appear in the menu dropdown. Any ideas please? Thank you.

  What is "Adobe XI" - Reader or Acrobat?

  But, "Save as Adobe PDF" is a function of Word, independent of this Adobe software, you have installed.

  

• Installation ok on iMac OSX 10.9.5 seemed elements 13. The IMac is restarted. Tried to open items. Open but the splash screen does not open. There was only 1 menu 'Photoshop Elements' no other drop downs appeared

  Installation ok on iMac OSX 10.9.5 seemed elements 13. The IMac is restarted. Tried to open items. Open but the splash screen does not open. There was only 1 menu 'Photoshop Elements' no other drop downs appeared

  If you go into the applications folder, can you open Adobe organizer of 13 elements, or the Editor directly? The editor is well hidden. It is located in the support files folder in the Adobe Photoshop elements 13 folder: