I updated my drivers and now my computer runs very slowly. How to solve the problem?
I've recently updated my Intel graphics driver and my drivers Nvidia because they were terribly outdated. As a result, I am able to run some games that I couldn't run before, but my computer became very slow. Now, the startup time is significantly slower, and the worst part is that the actual performance of the system is slower. I checked in the Task Manager, and my physical memory constantly rotates between 40 and 60% (I have 8 GB of RAM, Windows 7) without any game or program being open, except the web browser and Skype.
What is perhaps the reason for this problem? Is certainly the problem in the drivers? How to solve the problem?
"My graphics card is GEFORCE GTX 660 M. Is it compatible with the latest driver? »
Ah! A laptop computer. With laptops, it is generally better to download the driver from the mfg, not Nvidia.
This is because the computer laptop mfg bring changes that can make the improper generic Nvidia driver.
and while I always count should not slow down the system... You never know.
"What services I need to run.
Just to keep the correct terminology-
Services is the area where you stopped the service of bitlocker.
The start is where you keep things from loading when you start in Windows.
-Most of the time what's in Startup deactivation is something personal need, but there are some things that
I must be on the left.
I leave the Intel common user interfaceand Installshield update service, mainly because I don't bother
Discover what they are doing.
I also let anti-virus, Realtek audio, software profile keyboard and a few other things active.
I don't have Adobe Flash loading with Windows, but I don't use it a lot, and when I do the software that
uses it it launches automatically.
The bottom line here is that if you have software that you use all the time, it is more convenient to have it start with
Windows.
-Concerning the Services. This also has to do with personal preferences to a certain extent, but most things can be left alone.
I do not use the Services tab in the Configuration of the system, because I think it's only a one time adjustment.
(Clean boot, linked earlier, is the best tool for the verification of conflicts with Services)
To stop or disable a Service manually, tap - services.msc - in the run command to open
the main window of Services.
There is an Adobe Flash update in Services that should be kept, but when Adobe makes an update
I select the option notify me, but not to install it automatically.
I always preferred this with any updates, including Windows updates as there is less chance of a corrupt
Update If you're aware, it happens and do not do something intensive system while the update is being installed, particularly when an update requires a restart to complete.
-Registry. In the control run, type - regedit - and browse the registry with the file path in the
previous post and follow the instructions. You can save the key you are modify if you wish, that the use of the
backup to change the value to what is current would be faster than navigating to the key again.
-When playing around with things you are not familiar with creating a System Restore point before you
making these changes is a good insurance policy.
If you don't know how to create a system restore point - time to do some research.
In fact, all of the above is covered by tons of tutorials out there in the www.
SSD vs HDD - the specifications of the system for you the machine should be in your user manual or on the
MFG web site.
Prefetch is useful with HARD drive, because it improves performance somewhat, but read-ahead is not really necessary with SSD.
and can reduce the life expectancy SSD a bit (there is debate on gravity)
More research for more details. D
-If you use a HARD disk and that you have enabled Prefetch, the Prefetch will be rebuilt over time, if you delete the files.
-Here's another tip for when you are not sure of the impact of deleting files.
Rename file/folder. You can do something like add another couple of P to the front, or a 1a which will move
the file to the top of the window. If nothing is wrong in the next few days, you can delete the folder.
This method protects to empty the trash accidentally and lose the file/folder.
-Speaking of deleting the file. A great TEMP folder can slow things way down.
Run Windows, Disk Cleanup . This will remove many files in the Temp folder.
Or, for a full, clean, go to the - your User\AppData\Local\Temp
Open the Temp folder and delete anything that can be deleted (impossible to delete the files that are used).
-Defragment your HARD drive
-Run the Zig - zag Kit you'd use again and analyze the results.
It was a long, huh!
.
Tags: Windows
Similar Questions
-
I installed creative cloud for Lightroom 6 trial and now my computer runs like an old lady of 90 with a market framework. It is clear, he can not cope, and I need to buy a new computer. How can I transfer the case to the computer again that I did not yet?
Please click the link for photography Software Digital | Free download Adobe Photoshop Lightroom CC trial
.
I hope this helps.
-
' I need help. I updated Adobe cc and now my photoshop does not work. Here is the error message:
Problem event name: APPCRASH
Application name: Photoshop.exe
Application version: 16.0.0.88
Application timestamp: 55681d 39
The default module name: StackHash_76b2
The default module version: 0.0.0.0
The default module timestamp: 00000000
Exception code: c0000005
Exception offset: 0000000000000006
The system version: 6.1.7601.2.1.0.768.3
Locale identifier: 3084
Information extra No. 1: 76 b 2
Information extra No. 2: 76b2e5a7b24373bbe6f47563f13e47b1
Information extra No. 3: 51ff
Information extra No. 4: 51ff68a42cf4d2164e10e22e1f794f34
Hi Oscar,.
Please see the thread below:
You can also check: 2015 release of Photoshop CC: FAQ
Kind regards
Sheena
-
Got paper stuck in the printer and now will only print proofs. How to reset the printer
Got paper stuck in the printer and now will only print proofs. How to reset the printer
It looks like you may have some saved jobs in your queue that need to be removed.
Here's how:
To clear the print queue, stop the print spooler service and delete all the jobs/print pending.
You cannot delete all print jobs in the queue so that the Print Spooler Service is running.
To stop the Print Spooler Service, click Start, run and enter in the box:
services.msc
Click OK to open the Services Applet.
Locate the Print Spooler Service, right click and choose 'Properties' and then click on the "Stop" button to stop the Print Spooler Service is running.
The option "Startup Type" of Service properties print spooler is usually set to "Automatic" (which is now a good time to check it out).
If the "Startup type" is not set to "Automatic", set the "Startup type" to "Automatic" If that is your desire (which now is the time to check it out).Do not try to start or restart the Print Spooler Service immediately. You must remove all print jobs backed up first...
Then, delete all updates pending upward and forward to printing from XP. If they do not print before, you will need to send the to the printer again.
Using Windows Explorer, navigate to the following folder (assuming that Windows is installed on your C drive):
C:\WINDOWS\system32\spool\PRINTERS
Delete all the print jobs in queue (select and delete all the files) in the folder if the folder is without waiting for print jobs. The folder must be empty when you are finished.
Reboot your system and check the Print Spooler Service again to make sure the Print Spooler Service restarts automatically restart (given that the startup type is set to automatic).
After the reboot, check again the Spooler Service for printing and the 'Status' column for the print spooler must be read "started."Submit new failure of print jobs.
-
Someone broke into my computer informing me that he has been infected with malware, viruses, etc. and advising me to contact a phone number, also send me a live conversation on how to solve the problem. He claims to be an Apple / Safari servic
This kind of message is a scam. Do not meet it.
Force Quit Safari, then restart Safari while holding the SHIFT key.
-
After Reinstalling windows 7, Thunderbird (now 38.2) runs very slowly
As a result of a relocation complete Windows 7 and Thunderbird (now 38.2) runs very slowly, except for Mode without failure.
Hardware acceleration disabled by defining gfx.direct2d.disabled true and true layers.acceleration.disabled using the configuration editor has not helped. Or upgrade to the latest display driver (Nvidea GeForce 8500 GT 9.18.13.4181 17 August 2015))
I have very few messages in the Thunderbird folder.
I run Avast a / v.
Is it possible to run in permanent safe mode?
Thank you in anticipation
Simonides
Solved... Although I thought I had no addons, I got Cloudmark need the update and now it works well.
Detective Conan!
S
-
My Apple Macbook late 2009 has been upgraded to 4 GB and Mountain Lion but runs very slowly. When I check the memory system activity monitor, I see that there are 1.6 GB inactive. Is this the cause of the slowness and what I can do?
Reinstall OS X from scratch and add more RAM.
Ways to help make a slow Mac faster
17 reasons why your Mac runs slower than expected
Slow performance of Mac? This Article addresses!
Difficulty of slow start in OS X | MacFixIt - CNET Reviews
6 easy tips to speed up OS X Yosemite on your Mac.
Avoid using third-party software that claims to clean your computer. This software does more harm than good. In addition, you don't need it. Note that all computers become slower over time even in the normal conditions of use. Generally, the experienced users erasing the hard drive and do a clean install from scratch at least once a year or every time that the installation of a major upgrade of the OS. Well sure doing so also means that you need to maintain regular and several backups.
Add more RAM or reduce the number of simultaneously executed from applications and utilities. Remove unnecessary software such as anti-malware and that promises to clean your Mac. Look for the runaway process: Runaway applications can shorten the battery life, affect performance and increase the heat and fan acti... See also:
Before Mavericks
Open the activity monitor in the Utilities folder. Select all processes in the drop process . Click the % CPU column heading twice to display in descending order. If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar. Click the force quit button to kill the process. See if that helps. Don't forget to mention the name of the runaway process, so you can find the cause of the problem.
Mavericks and later versions
Open the activity monitor in the Utilities folder. Select all processes in the menu display . Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order. If you find a process that uses a large amount of CPU %, then select the process, then click on the quit icon in the toolbar. Click the force quit button to kill the process. See if that helps. Don't forget to mention the name of the runaway process, so you can find the cause of the problem.
Things you can do to solve the slow Downs
If your computer seems to run slower, here are some things you can do:
Start with tours: OS X maintenance - MacAttorney;
The X Lab: the X-frequently asked questions.
" Safe mac" Mac Performance Guide;
" Safe mac" the myth of the dirty Mac;
Start in Safe Mode , and then repair your hard disk and permissions:
Fix the hard disk and permissions before Lion
Boot from your OS X install disk. After the installer loads, choose your language and click on the button continue. When the menu bar appears select utility drive in the Utilities menu. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left. In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions. Wait until the operation is complete, then exit FROM and return to the installer.
Repair the hard drive - Lion-Lion/mountain/Mavericks
HD recovery start:
Restart the computer and after the buzzer, press on and hold down the COMMAND and R until it appears the screen of Menu utilities. Otherwise, restart the computer and after the buzzer, press on and hold down the OPTION key until the Boot Manager screen. Select recovery HD disk icon and click on the button below.
When the recovery menu appears, select disk utility. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left. In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no error is not reported, then click repair permissions. Wait until the operation is complete, then exit FROM and return to the main menu. Select restart from the Apple menu.
Restart your computer normally and see if it helped at all. Then do little maintenance:
For disk utility can't handle situations, the best third party is Disk Warriorutility; Fixed DW only for problems with the disk directory, but most disk problems are caused by the corruption of directory; Warrior drive 4.x is now compatible with Intel Mac.
Note: Alsoft ships DW on a bootable DVD that will boot Mac running Snow Leopard or earlier. He cannot start Mac that came with Lion or later preinstalled, however, DW will work on these models.
Suggestions for OS X maintenance
OS X performs certain maintenance functions that are supposed to take place on a daily, weekly, or monthly period. Maintenance scripts that are run at the beginning AM only if the computer is turned on 24/7 (no sleep). If this isn't the case, then a great solution is to download and install a shareware like Macaroni, JAW PseudoAnacronor Anacron utility that will automate the maintenance regardless of whether activity if the computer is off or asleep. Dependence on third-party utilities to run periodic maintenance scripts has been significantly reduced since Tiger. These utilities have little or no functionality with Snow Leopard or later version, and must not be installed.
OS X automatically defrags files smaller than 20 MB in size, so unless you have a disk full of very large files it little need to defragment the hard drive.
Under no circumstances should you install operating MacPaw or ZeoBit software (CleanMyMac/CleanMyDrive or Mac Keeper, respectively.) You don't need special software to keep your computer.
Useful links about malware Protection
"If you have an immediate problem with ads popping up see the Mac without danger" Adware removal Guide and AdwareMedic.
Open Safari, select Preferences from the Safari menu. Click the Extensions icon in the toolbar. Disable all Extensions. If it stops your problem, then re-enable one by one until the problem returns. Now remove this extension as it is the origin of the problem.
The following comes from user stevejobsfan0123. I made minor changes to adapt to this presentation.
Difficulty a few pop ups browser that supported Safari
Common pop - ups include a message saying that the Government has taken over your computer and you pay release (often called "Moneypak"), or a false message saying that your computer has been infected and you need to call a number of tech support (sometimes claiming to be Apple) to get it to be resolved. First of all, understand that these pop-ups are not caused by a virus and that your computer has not been assigned. This "hack" is limited to your web browser. Also understand that these messages are scams, so don't pay not money, call number, or provide personal information. This article will give an overview of the solution to remove the pop-up window.
Quit Safari
Usually, these pop-ups will not go by clicking 'OK' or 'Cancel '. In addition, several menus in the menu bar may become disabled and show in grey, including the option to leave Safari. You'll probably force quit Safari. To do this, press command + option + ESC, select Safari, press on force quit.
Relaunch Safari
If you restart Safari, the page will reopen. To avoid this, hold the "Shift" key when opening Safari. This will prevent windows since the last time that Safari was running since the reopening.
It will not work in all cases. The SHIFT key must be maintained at the right time, and in some cases, even if done correctly, the window is displayed again. In these circumstances, after force quit Safari, turn off Wi - Fi or disconnect Ethernet, depending on how you connect to the Internet. Then restart Safari normally. He'll try to reload the malicious Web page, but without a connection, it will not be able to. Leave this page by entering a different URL, i.e. www.apple.com and try to load it. Now you can reconnect to the Internet and the page that you entered is displayed rather than the malicious.
An excellent link to read is Tom Reed Mac Guide of malicious programs.
Also, visit the FAQ XLab and read of detection and avoid malicious software and spyware.
Check out these articles from Apple:
Mac OS X Snow Leopard and malware detection
OS X Lion-Protect your Mac against malicious software
OS X Lion mountain - protect your Mac against malicious software
OS X Mavericks-Protect your Mac against malicious software
On the quarantine of file under OS X
If you need antivirus protection Thomas Reed recommends to use ClamXAV. (Thanks to Thomas Reed to this recommendation.)
The user Joe Bailey comes this equally useful advice:
The facts are:
1. There is no anti-malware software can detect 100% of malware out there.
2. There is no anti-malware that can detect all targeting the Mac.
3. the best way to prevent breaches the most is for you as the user is aware that
the most successful malware attacks rely on sophisticated social engineering
techniques preying on human greed, * and fear.
4 Internet pop-up windows telling the FBI, NSA, Microsoft, your ISP has detected malware on
your computer is designed to trick you into installing their malware thinking it's a
protection against malware.
5. some of the anti-malware market products are worse than malware
go where they are supposed to protect you.
6. be careful where you go on the internet.
7. don't download anything from sites, you know are safe.
8 avoid links that you receive in email, always be wary, even if you get something
you think a friend is, but that you did not expect.
9. If there is any question in your mind, then assume that it is malware.
Troubleshooting Applications
I recommend that you download a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaneror hiding a Cocktail that you can use to delete the former newspapers and archives, cleaning, etc. Corrupted cache, logs or temporary files can slow down the application or OS X crashes and panics of the kernel.
If you have leopard snow or leopard, then for similar repairs install Applejackfreeware utility. If you do not start in OS X, you can boot into single-user mode , where you can run Applejack to make a set of routines for repair and maintenance of the command line. Note that it takes 1.5 AppleJack for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later versions.
Basic backup
For some people, Time Machine will be more than enough. Time Machine is part of Mac OS X. There are two components:
1. a panel of Time Machine preferences as part of the system of preferences;
2. a request for Time Machine, located in the Applications folder. It's
used to manage backups and restore backups. Time Machine
requires a backup drive that is at least twice the capacity of the
drive being backed up.
You can also get an external drive at least equal to the size hard disk internal and make (and maintain) a bootable clone/backup. You can make a bootable clone using the disk utility's restore option. You can also create and maintain clones with good backup software. My personal recommendations are (the order is not significant):
2. get backup
5. Synk Pro
6. Tri-Backup
Visit The FAQ XLab and read the FAQ on the backup and restore. Also read How to back up and restore your files. For using Time Machine, visit FAQ Time Machine of Pondini for help with all this time Machine.
Referenced software can be found at MacUpdate .
Additional tips
Make sure you have a sufficient amount of RAM installed for the number of applications you run simultaneously. Make sure to leave a minimum of 10% of the capacity of the hard disk as free space.
Add more RAM. If your computer less than 2 GB of RAM and you use OS X Leopard or later, then you can do it with more RAM. Snow Leopard and Lion works much better with 4 GB of RAM that is their system. Most concurrent applications, that you tend to use the more RAM you should have.
Always have at least 15 GB, or 10% of the capacity of your hard disk as free space, the largest. OS X frequently accesses your hard disk, so offering enough free space will keep things slow down.
Check for applications that may be hogging the CPU:
Before Mavericks
Open the activity monitor in the Utilities folder. Select all processes in the drop process . Click the % CPU column heading twice to display in descending order. If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar. Click the force quit button to kill the process. See if that helps. Don't forget to mention the name of the runaway process, so you can find the cause of the problem.
Mavericks and later versions
Open the activity monitor in the Utilities folder. Select all processes in the menu display . Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order. If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar. Click the force quit button to kill the process. See if that helps. Don't forget to mention the name of the runaway process, so you can find the cause of the problem.
This problem occurs often because of a corrupted cache or the preferences file or an attempt to write in a corrupted log file.
-
my computer runs very slowly what can I do to inprove this
my computer runs very slowly what can I do to inprove this
Uninstall all toolbars for Internet Explorer. These include Bing, Google, Yahoo, Foxit etc, anything that presents itself as a toolbar to the browser...
Also uninstall anything as to MyWebSearch or any other unwanted search engine...
Run Malwarebytes... http://www.Malwarebytes.org/
When finally, it shows the list of infections, "select all" and take the option to remove
Minimum memory required for Windows 7 32-bit is 1 GB and the minimum for Windows 7 64-bit is 2 GB.
Note that they are minimums for Windows, NOT Windows as well as a bunch of other things. If you have bits and bobs like Weatherbug, Speedfan, Networx or anything that takes place in the region of notiification, you need of MORE memory.
You need to more memory, especially when running invasive sulutions anti-virus like AVG, Norton and McAfee, Kapersky. In fact, you better a any of them works not as there are more effective and less morose autour AV solutions...
ESET NOD32 is good if you don't mind paying, and Microsoft Security Essentials is good if you prefer free...
Get the above done and then report back telling us how it happened... :-)
-
How to solve the problem with the wacom tablet and the polygonal lasso tool. It does not work with a pen. I have install windows 10 and fresh, new drivers for wacom bamboo, could he makes problems or there is a problem of photoshop?
It should do. You use one of the buttons of pen maybe? Just touching wheels with the pen with no buttons or modifier keys. Press ENTER to close the selection.
Personally I never use the lasso, Polygonal, but rather just the Lasso tool by using the ALT (Opt) to operate the Polygonal tool. I also use the mouse instead of the Tablet for the selection of cutting edge. It is a little too uncertain where the point will go when hovering the stylus above the image.
-
you just bought LR6 DVD that I tried to install Adobe says that the installation is not possible because I am running Vista, even if I run Win7 Home Premium on my computer. Any ideas how to solve this problem?
Right click on the file Setup.exe and choose Properties option.
Then click on the Compatibility tab.
The value of the Windows 7 operating system and check.
See the link below:
-
My messages send and receive txt messages not iMessage on my iPhone and I don't know how to solve the problem to send and receive messages as iMessage
Settings > messages > iMessage turn off then turn it back on...
If it does not sign of your apple under messages ID. Settings > General > reset > reset all settings (will not erase data).
Then log in messages
-
My computer has Windows Vista Home Premium 64 - bit operating system. When I try to get updates, there is an Error Message Code 8000 ffff. How fix/resolve this problem?
Error when you download updates using Windows Update or Microsoft Update: 8000FFFF
http://support.Microsoft.com/kb/946414How to reset the Windows Update components?
[Launch the difficulty mode by default and aggressive , if necessary]
http://support.Microsoft.com/kb/971058
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft -
used dell replaced 86oo HDD following bad advice from dell forum CPP is invited as unavailable Dcom service does not start because of the RPC dcom just made out time visit many Web sites followed the procedure for reset pressure by entering my properties tunneling TCP/IP top computer and removing SPX protocol entered services to start both. rebooted computer unavailable rest RPC and Dcom continues to time-out and does not start. with experince please help me solve this problem. as stated IV ' e resherched it I put services according to the dependencies all 9 helpppppppppp... as a result, I can't complete chipset driver facilities, networking ect...
Hello
I suggest you to send your query in TechNet forum for better support.
Link: http://social.technet.microsoft.com/Forums/en-US/itproxpsp/threads
-
How to solve the problem with the update code o646
E-mail address is removed from the privacy *.
Hello
Please remove your email address, because it will attract spammers.
Try this 1st to see if it helps, and it should:
Description of the Patch registration cleanup tool
http://support.Microsoft.com/kb/976220/------------------------------------------------------
If necessary :
Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
or the update itself - double click a view more information (or click top then discovers on the right)Those who will take you to a page where you can download the update.
Or go here and the KBxxxxxx number to download it.
Download Center - mount the KBxxxxxx.
Microsoft Download Center
http://www.Microsoft.com/downloads/en/default.aspxDownload - SAVE - go to where you put them - click on - RUN AS ADMIN
Then you can right click on the update in the updates Windows and HIDE.
If you get an error Installer install this version:
Windows install 4.5 Redistributable
http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en----------------------------------------------------
Then run this:
How to reset the Windows Update components? -a Mr Fixit
http://support.Microsoft.com/kb/971058Description of the system for Windows Vista, Windows Server 2008, update tool and
for Windows 7
http://support.Microsoft.com/kb/947821------------------------------------------------------------
Because these are all Office updates you might get more information if necessary in the Agency of those groups that
may have experienced the same problem.Office newsgroups
http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspxMicrosoft.public.office.misc discussions
http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us------------------------------------------------------------
If necessary you can incident free get reports however the above should take care of it for you.
Windows updates - free Incident report
Go here and click on-> Windows Update fails while searching, downloading or installation of updates
http://support.Microsoft.com/GP/wusupport#tab3The security updates, you can get free support Incident report
http://www.Microsoft.com/protect/resources/support.aspxI hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
Computer runs very slowly - base\wcp\sil\merged\ntu\ntsystem.cpp
Original title: WindowsWcpOtherFailure3...
My computer practically does not - it works sporadically and only VERY VERY slowly. When I look at the error reports problem that I see that it has more than 300 problems WindowsWcpOtherFailure3
It says file - base\wcp\sil\merged\ntu\ntsystem.cpp
function windows::Rtl:SystemImplementation:DirectFileSystemProvider:SysCreateFile
1849 line
Any suggestions on how to fix
Follow the steps below:
Method 1: Restore the system
Start your computer in safe mode and perform the System Restore to a restore point before the show and check if this solves the problem.
See also System Restore: frequently asked questions
Method 2:
Do the Startup Repair and check if this solves the problem.
See Startup Repair: frequently asked questions for instructions.
Gokul - Microsoft Support
[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
Maybe you are looking for
-
Please, let me know if Apple will release a 17 inch macbook pro or macbook air. I want to buy a new one, but I see that Apple does not offer such a model at the moment. Thank you
-
You cannot change the location of the Web site folder
Greetings, When I change the location of the Web sites folder in the server application by changing ' Store Site Files In: ", the files in the default location of continue to load and not those of the location, I've specified. The location, I put is
-
Over a period of several weeks, this 5 year laptop has developed a failure intermittent startup. I went through all the suggstions found on various forms (running the diagnostics of F2 and F10 etc.; replacement of battery) and found yesterday when ev
-
Hello I have HP Photosmart C3150 all-in-One Printer, which hangs at startup each time after switching to the new machine (I used Migration Assistant to transfer all the data from the old machine. Looks like I need to re - install the HP software, bu
-
G7-1237dx: Bios Code Reset
At the start of my laptop gives me the opportunity to enter an administrator password. Because the way that I've never been one, I about gave a message indicating that I am oquee on high-profile by the code: 60879036. What should I do now with this n