I use a simple low-pass, but the output of the filter outputs at a different frequency, even if the input frequency is the bandwidth

Similar Questions

• I use a dvd - r disc, but the movie maker says is not a recordable disc

  I use a dvd - r disc, but the movie maker says is not a recordable disc. also, when I try to publish the dvd is not the choice, her computer, a recordable cd or camer digital video...

  If you're running Vista Home Premium or Ultimate...
  the following article is perhaps worth the drive... If not...
  You'll need to publish (your Movie Maker save project)
  in the. WMV video format and the use of third-party software
  to burn your DVD.

  "Import files into Windows Movie Maker" "publish and burn a movie to a DVD.
  http://m-Lov.blogspot.com/2007/11/you-can-use-Windows-Movie-Maker-to.html
  Scroll down to: "2 to publish and burn a movie to a DVD")

  If you need DVD Authoring software... What follows
  freeware software can be worth a try:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.dvdflick.NET/Download.php
  (the download is: "dvdflick_setup_1.3.0.7.exe")

  Save the file to your desktop or a folder on your
  hard drive and install from there.

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  AVI to DVD with DVD Flick Guide
  http://www.Digital-Digest.com/articles/AVI_to_DVD_using_DVD_Flick_page1.html

  To create a video DVD base that should play in a free
  permanent drive DVD... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  Advanced Cyberlink, Nero, Roxio, software
  Ulead, etc... but at least it is a start.

  Good luck.

• Auto rigging is really slow on the Mixamo website. I rarely a rigging generate smoothly since Mixamo has been acquired by Adobe. I always use 1.3 fuse. I would use CC fuse to download, but the download seems to remain at 0%. I really hope that the Autorig

  Auto rigging is really slow on the Mixamo website. I rarely a rigging generate smoothly since Mixamo has been acquired by Adobe. I always use 1.3 fuse. I would use CC fuse to download, but the download seems to remain at 0%. I really hope that the Autorig does not go far, it helped me a lot in my career as an animation.

  Questions Severral to address here:

  • Fuse CC has a bug with the download bar that visually is stuck at 0%, but it is downloading in the background.  You can just let it run a while and it's finally finished on its own.  The bug has a fix in place who should come out with the next update to the CC Download Manager.
  • Fuse rigging 1.3 should continue to work, but there is a bug that we are exploring that blocks some.  Nothing of what you can really do for the moment that we just need time to focus on the issue.
  • Auto-greeur will not go far.

• I have to renew the admittance of covers offered by my University pass, but the product (the redemption code) code gives me error. What can I do?

  I have to renew the admittance of covers offered by my University pass, but the product (the redemption code) code gives me error. What can I do?

  Hello

  Please help us to better understand.

  What is the error you get?

  In the meantime, you can also check: -.

  -Help code them redemption

  How activate/redeem redemption Adobe CC Code

• How can I add to a list of audio messages on an existing Web page?  I used to copy and paste, but the clouds does not allow me to do.

  How can I add to an existing list on a web page, where all the information is the same, but the date?

  Well, I was in Live mode, and I had to be in design mode. Everything is

  now though.

• Why my Macbook Pro boot used place in any mode but the comments?

  My Macbook Pro almost 5 years, worked very well, then the beech ball began to come a lot and programs would take forever to load. I tried to stop him to restart in diagnostic mode, but it would not closed and just hung up for about an hour.  I hit the power button to force a power down and when I went to turn it on again, it does not start in safe mode or diagnosis.  He goes to the login screen and gives me the choice of my log in or invited, but starts if I select my journal going through the motions leading to the top of the load bar, but before he gets to the end, she stops.  I can start in guest mode and access the internet, but I can't do anything from there.  If I click on the Apple, it gives me the opportunity to go to the startup disk, and when I click it, it asks which drive I use, (only one option, HARD drive), but when I select it, there is nothing there.

  I can't really afford a new Macbook for now, and until the last few days it works very well, so I prefer to get it fixed to the top if I can, so any help is appreciated.

  See you soon,.

  Troy

  Hey there,

  I see your message that you are unable to connect to your user account, even in safe mode.  I would like that you try to start your computer in OS X Recovery and then try to repair your hard drive.  If the problem persists after that, you can reinstall OS X.

  To start your computer from recovery, restart your Mac and press the command and R keys at startup.

  

  Hold these buttons until the Apple logo appears. After your computer has finished starting upward, you should see a desk with an OS X menu bar and window OS X Utilities with the above options. If you see a login window or your own office instead of the utility window, it is possible that you do not press command + R early enough. Restart your computer and try again.

  Choose the option you want to use from the utility window or in the Utilities menu.

  OS X: on OS X Recovery

  Take care.

• Hallmark bonus software shows the latest version of Hallmark cards must be used and I did. But the Bonus software does not work.

  I bought for Hallmard Card Studio 2012 and received software bonus with most cards etc. When I tried to install the software of premium it says I have fearful to have installed the last Hallmark witn a 13. 1 something or other. I installed the latest version and I don't know what they mean. But they say that it has not been changed. What should I do?

  Hello

  What is you receive the exact error message?

  Method 1:

  I suggest you to uninstall all previous versions of the software and then reinstall the software on the computer and check if it helps.

  See the articles below:

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  http://Windows.Microsoft.com/en-us/Windows7/install-a-program

  Method 2:

  If the method above does not work, then I suggest you to contact the support of software to improve assistance.

  http://www.hallmarksoftware.com/support/support.aspx?NetID=CJ&RS=48&preflanguage=5

• Pavilion m7-1015 need simple low pass load

  I need to back MS.

  Hello

  Thanks for your quick response.

  Here are the most recent MS driver HP get on there Web site:

  http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63224.exe

• I bought the iPhone 6 model MG472J/a of the Japan. I want to use it in Bangladesh. But the sim card of Bangladesh supports my iPhone. I contacted with suggested iPhone Robi and Grameen Phone to unlock the sim card but have found no solution.

  How to unlock the lock carrier unlock where there is no service?

  amindu14 wrote:

  How to unlock the lock carrier unlock where there is no service?

  You do not have.  IF the carrier does not unlock then you can't get it unlock.

• How can I remove the mailbox Muse on a simple contact form but still have a static email address in the code of the message will send to?

  In Muse, I use a simple contact form, but I have to be able to delete the "electronic mail" box and apply a static address in the code that would send the message to. I have static e-mail accounts do, I don't just have to be displayed in the Inbox. How can I change the php code in Dreamweaver to delete the mailbox, but have always contain the static email sends the message of? Basically, I don't need the email to visually display on my site to all that the user has no need to enter the email address.

  Hello

  You cannot remove field by Muse web form email address. You can try to incorporate forms of third party like jotform.

• low pass filter in labview 7.1

  Hi all

  I would like to ask about the low pass filter.

  Is it possible to make a simple low-pass filter without any supplement on Labview 7.1.

  We strive to connect a micro-switch in a DAQmx device, but the thing is, because the switch is somehow Earth-connected to an engine step by step, each time the engine is running, it will have peaks and spikes were interpreted as logic 1 in the labview. Since we have no treatment signal Add ons in the labview, we try to do it ourselves.

  Thank you

  Although suggestions are significant

  But the solution has not been reached. So actually, we tried to change the analog to digital input in our DAQ hardware. I hope that the - top-of-10V-spike not to spoil our DAQ hardware. And it turns out OK. In the digital input, spikes has appeard not even once, and we think it does.

  @ t06afre: thanks for the material made up the suggestion, but since it is a testbox.foobar.com that we, his isn't going to be easy to put in engines and unlikely capacitors supposed to do. The cable twisted pair is not a bad idea though.

  We thought that the software solution filter would be the best (less time necessary and less messy) but is not as we have not thought of material assistance (R - C circuit, duuh) filter.

  And on the 'minimum pulse duration' setting, is not only applicable for some DAQ hardware? CMIIW

• When I use the trial license, it gives me a simple Chinese version, but I want to use the version in traditional Chinese, how to change?

  When I use the trial license, it gives me a simple Chinese version, but I want to use the version in traditional Chinese, how to change?

  Cloud creation help / solve the installation language. Creative Cloud applications. CCM-

  http://helpx.Adobe.com/creative-cloud/KB/change-installed-language.html

• Low-pass filter before the NI 5112

  Hello

  I currently use a 5112 AND measure the signal of an infrared detector in an experience of ring to the bottom of the cavity. Below are three examples of signals. My main question is how I can implement a low pass filter, passive preference, before my 5112 OR undistorted extremely my signal due to the impedance mismatch. Now a few details:

  

  

  

  Some unique captures for each wavelength are shown in color, while average 25 pulses appears offset in black. The range and offset are chosen in each case in order to minimize the noise of "scanning". In the case of 3.14um, the noise that you see is about 25 times noise from scanning. They were taken without the limitation of BW and 100 ms/s mode.

  The detector (Vigo MIPDC-F-10) has a bandwidth of 10 MHz. I think it is a low impedance and is intended to be harnessed with 50Ohms, however its documentation confuses me, and I'm waiting for a definitive answer from the provider. 2.4 part of the manual says 50Ohms recommended, however the Datasheet and our map calibration (below) seem to suggest 1 MOhm is recommended!

  

  There are a few strange oscillations with a period of almost 180ns in our signal that I thought were due to the impedance mismatch existed in the system before I changed it:

  -Detector

  -1 metre 50 Ohm SMC Cable BNC (RG-174)

  -Inline BNC connector

  -meter 5, 75 Ohm BNC to BNC cable

  -Digitizer, DC, no BW limit, 100 ms/s, 1MOhm | 30pF

  When I saw this configuration, I knew something wasn't right and I even he modeled in LTSpice and he showed the same period of oscillations. But now, the Setup is:

  -Detector

  -1 metre 50 Ohm SMC Cable BNC (RG-174)

  -BW digitizer, DC, limit, 100 ms/s, 50 Ohm

  And we still have oscillations, even if the period seems to have changed to 320ns all about. These oscillations, which remain are 99%, probably due to our drop-down ring cavity experiment, however if anyone has recommendations on possible causes or ways I can confirm it is not because of my chain of detection they would be more than welcome!

  Now, the main question. Between the 50 Ohm 1 meter cable and the scanner I would insert a low pass filter. The BW limit has helped reduce the noise, but it can certainly still be further reduced without any lose to our signal. That's because we cut the beginning of the signal and then measure just the the decay time, which is relatively long and smooth (1 to 2 times 1/e US). Thus, in the future I may even want to try to eliminate the oscillations 320ns, but I'm afraid that this much filtering will distort the signal too. Therefore, for the immediate future I'm just looking to 'replace' the filter BW 20 MHz, with something like 1 or 5 MHz.

  Of course, I would disable the BW limit on the digitizer to avoid additional confusion, but nevertheless, I'm not sure how to approach the problem. Usually I do a lot of research and try different solutions. However, I don't have access to all components to this work, so everything should be ordered, and I don't have a lot of time to experiment. Ferrites seem like a possible solution, however not sure how effective they are at this low frequency or the way they work with coaxial cables. I know that the filter passes low RC base, but the 50Ohms (or 1MOhm | 30 pF if I change it) seem to make it impossible. I guess an op-amp based one might work, however the large input impedance is the impedance of coaxial cable... etc...

  All of the recommendations of the technique or red resources wort would be welcome. Thanks for your time.

  A possible way to separate your artifacts electric and the cavity is relatively simple.  You take the data at three wavelengths.  For each of them, make a simple exponential decay (for example exponential Fit.vi) adjustment to your data, then subtract this signal.  You should have something that oscillates on an average.  Compare the residual signals for all three wavelengths, either visually or with something like a power spectrum.  Anything in the three is probably the electronic (and you could possibly model and subtract it rather than trying to eliminate it).  This could break if the rise time of the signals are different, because that will include elements of different frequency.

  I am not convinced that you need to filter your signal before taking data.  As you said, any filter will distort your final signal.  My preference would be to take the raw signal and apply a filtering in the analysis.  LabVIEW has a rich filter, so you can experiment later.  If you apply a filter before the digitization of data, you take you will never receive data.  However, if you know that your data has no component of your proposed cut filter frequency, you should be good.  An analysis of the power on your current spectrum should tell you this.  Be careful.  Your form of rise time may have information you want later.  If you filter, you will probably slow it down.

  Good luck!  Let us know if you need more information.

• Cannot download plug in for windows media player. Have used the site to download and it says it worked, but the plug-in does not appear on my list of plug-ins.

  I tried to hear an appeal of a Web conference. Received a message, necessary plug windows media. Check my plug ins, no windows media. Reading about firefox support tutorial. Clicked on download. Had a window that requires repair or change. Tried to fix it and then change. Need better guidance on how to finish download. Download the message passed, but after firefox closing and re-opening, no still no plug-in for windows media in the list of plug-ins. Go to site and could not hear Conference.
  Reading support forum. Message while using about: config. Tried, typed in on: config in Start menu, but do not see anything that looked like I could change for real like message said.
  solved by opening internet explore and go to the website and listen to the conference call on windows media player. There was a message saying: If you want to enable media player click here. Not so heard Conference.
  Tried using chrome. You have to listen to the Conference yesterday. Today, he had the same message you need to plug in when I tried to follow the instructions in connect, it was just as confusing and useless like firefox. Most is that I tried to make any statement in the suggestions forum for firefox and can not get the windown media connect to appear in my list of plug-ins and can not hear calls for conference on firefox.
  Chrome said that they worked on connect available to the chrome store.
  I agree with the comments that I was able to go to web sites and to hear the calls before firefox did an update that removed my windows media plug. The fix simple download, two from windows, does not, apparently because firefox cannot find the fix. This isn't for lack of user, and it seems that windows attempted to provide a fix, and firefox does not recognize.
  Bottom line, it is easier to use another browser, that trying to get windows connect multimedia player installed on firefox. What is a browser, if you can not hear an appeal on the Web site the browser will take you to? Please make it easy install windows media branch on firefox. Thank you..

  If you get the screen to change/repair, it means that the Setup program has detected that you have already installed the plugin.

  Do you not see the file here:

  C:\Program Files (x86)\Mozilla Firefox\Plugins
  

  Its file name is: np - mswmp.dll

  If the file is missing, I suggest to delete and then reinstall the plugin.

  Edit: By removing and then reinstalling I mean using the delete button under the modification and repair buttons in the Setup program, and then run Setup to reinstall.

  For your questions, you can either (1) open the your profile page (drop-down menu of your username along the edge very top of the page) or (2) open the "sort and filter" section the questions above and click on the link 'My Contributions' (https://support.mozilla.org/en-US/questions?filter=my-contributions).

• Loss of information on the edges of the sample of low-pass filter

  Hello

  I use a low-pass filter elliptical command to address 6 to remove trend of signal in a measure of the pressure of data sampled before, however given that the program must deal with and calculate an index in a given period of time, I can't filter and store then the data for the calculation later.

  The size of the sampe is this 1250 or 10secs data with sampling frequency value is 125 samples/s.

  In the effort to eliminate the distortion of the filtered signal, I use a technique described for tag/add a start and a value final ampitude on the beginning and end of the sample of the same length (1250), I have also run the data in the order opposite to eliminate phase effects.

  However I want to say is still a slight distortion that can be seen in the start menu of the sample; first of all, here with the loss of amplitude, but more often it's worse than that and distortion occurs at the end of time to time.

  

  

  I have some experience of the DSP (but since 20 years ago!) and remembers Windowing may be a way, but I still think that the filter should not be so difficult to implement more I don't want to lose any information amplitude.

  Any help would be appreciated.

  See you soon,.

  Kevyn

  johnsold wrote:

  ..., you may need to use different techniqoes that are not in the information stored on the previous behavior of the signal.

  Lynn

  In some cases special where information that happened before all data you have is implicit, but data yo u have, you can go out with reflecting data about initial/final data set and then run the data through the filter first forward, then backward. After that mix data accompanying your data "pretend" and just look at the part that iss associated with the actuall data set.

  Ben