Why can't start my computer in safe mode to do a system restore?
When I try to go to eyetem restore in safe mode, it will not go. I think I get
Registration errors can help with this problem?
It is somewhat similar to the following Technet problem:
"SP3 hangs at agpCPQ.sys during startup"
who offers this article as a solution:
"Problems when Windows XP tries to load the Agp440.sys service.
< > >http://support.Microsoft.com/kb/324764 >
That may help your problem.
HTH,
JW
Tags: Windows
Similar Questions
-
I can only start my computer in safe mode, what can I do?
Hello
I can only start my computer in safe mode and my security settings are turned off, what do I do?
I tried to download an anti virus scan, but it does not work?
Hello
1. what happens when you start your computer in normal mode?
2. what version of Windows is installed on your computer?
3 are you aware of any changes made to the computer, before the show?
Assuming you have Windows Vista or Windows 7 is installed on the computer,
Method 1:
Perform a clean boot and check for the issue.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: once you are done with the boot, follow step 7 of article to put your computer to normal startup.
Method 2:
Check if your computer is configured to start only in safe mode.
a. Click Start, type msconfig and press ENTER.
b. click on the Startup tab.
c. under Start Options, uncheck safe startup.
d. click on apply and OK.
I hope this helps.
-
I can only start my computer in Safe Mode - system hangs on startup after installation of updates
Original title: UPDATES DOWNLOADED PROBLEMS to START NORMAL, MUST LOAD IN SAFE MODE - LOST AFTER 30-40 SECONDS VIDEO
After the download and installation of updates on my desktop Gateway (FX7020) the computer freezes on me and was forced to shut down hard. After a few attempts to start the computer, I was able to get into safe mode. After some time in the exploration of the event viewer I tried out and re-start of normal BONE. I was unable to make it through the boot sequence and had to shut down hard again. I waited a while and it made back in safe mode, but this time after 25-40 sec. I lost the video, the mouse, the keyboard. Everything was running. I've read a few articles and I hope that I don't have a F... THE OS.
Thanks any help will be graciously appreciated... RA
Hello
Method 1:
You can try restoring the system to safe mode and check:
Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
You can consult the links for:
System restore
http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restoreSystem Restore: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
Method 2:
If the problem persists, you can refer startup Repair in Windows Vista, which is a recovery tool that can fix certain problems. You can check the link:
http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions
http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista -
I can't get my computer in safe mode. The custom of menu f8 "Let me pick something other than the normal mode. My keyboard works perfectly fine (obviously since I could press f8), but it won't let me choose Safe mode. I have a Trojan horse on my computer so I'll try to get it in safe mode.
Hello
Start - type in the search-> MSCONFIG box find top - make a right click on - RUN AS ADMIN
Control - Section Boot - Safe Boot Startup tab and check the boxes below if necessary - APPLY / OK - REBOOT.
===========================================================
It can be made repeatedly in Mode safe - F8 tap that you start, however you must also run them
the Windows when you can.Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Malwarebytes - free
http://www.Malwarebytes.org/Run the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can download it here.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMicrosoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=enalso install Prevx to be sure that it is all gone.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp <-->-->Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.asp--------------------------------------------------------
If necessary here are some free online scanners to help the
http://www.eset.com/onlinescan/
http://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1--------------------------------------------------------
Also do to the General corruption of cleaning and repair/replace damaged/missing system files.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
I hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
I can't start firefox even in safe mode.
I can't start firefox. It is said that it can not load the profile. The profile files are there, I believer.
I can't start firefox even in safe mode, by holding down the SHIFT key.
I stopped firefox when he tried to do a refresh (it took a long time).
So there is a record of old data that I copied the default profile folder.Hmm, also:
arlener said
.. There's a data folder I copied the default profile folder.
If you want to use the content of the profile that you copied return, make sure that they don't are not 'nested' a layer down in the profile folder.
-
Can't start at a fixed point to the password screen. Goes to a blue screen and try to restart automatically. When you run safe mode cannot use the system restore, have no security of windows, so does not automatically restart when the change is made impossible to read. Norton 360 found two viruses at the origin and the fixed, no viruses detected in recent failure.
Hello
You can use the full version of Windows Vista installation disc and try to perform a restore of the system, the Windows recovery environment and check.
For more information, you can consult the following article ot.
-
I can't start my pc in safe mode
Can any one help I have a windows XP when I boot my computer I want to run in safe mode, to start, it ran windows normally or the safe mode options, but I can't move the selecter until safe mode, I think that the keyboard does not work on startup so I can't choose Safe mode no matter what knowledge is there another way to start in safe mode?
http://bertk.MVPs.org/html/SafeMode.html
(Scroll down to the "Alternative method to using the F8 key"... "But you should understand why you don't have a keyboard at that time). -
Why can I see cookies only in safe mode?
[FF 3.6.10] I can read, and delete cookies in safe mode, but in full mode, the list of cookies will appear only as the small triangular icons; If I click on one of these, I see the cookies from this site. But why am I not able to see the name of the site in full mode? This behavior startwed tonight, just after I had recorded a password with a new sit4e I was visiting. THX eda
If this does not work in safe mode and then disable all your extensions and then try to find out who is causing by allowing both the problem reappears.
You can use "Disable all add-ons" window the startup of Firefox to solve the issues in Safe Mode to disable all extensions.
You will need to close and restart Firefox after each change via "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ') -
Found the answer... the text bar is still gray but I was able to unlick
in the toolbar and I was able to add text. Not sure, maybe "text".
the button was grey all along? I don't think, but I can choose only three of
the four options that allow a check mark in the view menu: toolbar, color and the State. The text
has a check, but it is gray, cannot be enabled or disabled. Maybe I just never noticed it before. Could
Add text by clicking on the toolbar tools, then reclicking thereon. Odd. It works and that's all that I needed.
Hi Gail Harris,
Safe mode is an option of troubleshooting for Windows that starts your computer in a limited State. In safe mode only basic files and drivers needed to run Windows are started.
For more information, please visit the links.
-
Windows 7 Build 7600 this copy of Windows is not genuine - I can only run the computer in safe mode
My son - under Windows 7 Home Premium - Dec 2010 laptop, purchased at Future Shop
It has worked well for the past 2 years. Suddenly, on Saturday, he stopped doing anything.
That's happened?
I don't know, but when I started upwards, normally, all I get is the 'black screen of death", with the words"Windows 7 Build 7600 this copy of Windows is not genuine ".
I CAN'T DO anything HERE - can't make a right click, left click, CTRL ALT DEL, menu button - nothing worksSo I rebooted in SafeMode with networking - everything works fine.
I have tried many fixes - when I read the topics - but NONE OF THEIR WORK in safe MODE
slui.exe 4? Does not work in safe mode
Run? Does not work in safe mode
Start - computer - properties - activate windows now? Does not come to the top, in safe mode
However, he won't come to the top with a status or product ID
Starter - activate windows? does not work in safe mode
I tried to download the windows / microsoft / genuine / validate the tool - but guess what, that didn't work either - update installation failed - error information 0x8007043C - probably does not work in safe mode - but that's all I have As
I did a system restore - it 'worked' but ran very slow - and then when I restarted, the problem came back.
and many othersI ran Avast free on it - and anti-octets Malware - nothing - but I can only run in safe mode.
Avast has some programs that run on the system re - start - but it does not start in normal mode - if none of them workI read a lot of topics on this - and I'm VERY FRUSTRATED
I used another laptop - does the slui.exe 4 - and he asks me the activation key? I can't that - not in safe mode
I called the phone number - and talked to anyone - they told me to go through the www.howtotell.com - and report a counterfeit copy. But it's NOT a COUNTERFEIT copy.
OK - it's perhaps - but why it worked for 1.5 years? And I bought from FutureShop, so should be reliable. And I have the certificate of Authenticity on the backDon't forget - I can't do anything either in normal mode - but the Safemode with network works perfectly well.
So, I don't know what to do.
I don't think that's my problem - I bought a genuine copy, a reliable retailer.
Anything you can do to help, would be greatly appreciated.I agree with this assessment.
Hard drives come with a large number of spare sectors 'invisible' - it's only when they all well used by repair mechanisms built-in to the reader that the number of bad sectors Windows begins to increase from zero (in your case, it is a sector) means that there is already a significant degradation of the drive, and you can expect the count to start sooner or later back.
-
Cannot defragment the hard drive AND cannot start the computer in safe mode
I have been unable to defragment my hard drive because it tells me that chkdsk /f planned. I tried manually works in command mode nothing works. I was advised to try to start up in safe mode, but when I do that all I get is a screen of command lines, and my computer freezes there. What I'm doing wrong and what I can do differently?
If you try to defragment a volume and see a message like this:
Disk Defragmenter has detected that Chkdsk is scheduled to run on the volume: (c :))
Please run Chkdsk /f.This means that the volume (disk) that you want to defragment was marked 'dirty' XP.
The question was preceded by a loss of power, aborted reboot or abnormal termination? (this includes the plug pulling, buttons power, remove the battery, etc.)
The afflicted system has a working CD/DVD (internal or external) drive?
You have a genuine XP installation CD bootable, which is the same Service as your installed Service Pack (this is not the same as any recovery CD provided with your system)?
You can check the status of your bit of impurity from a command prompt window.
To do this, click Start, run and enter in the box:
cmd
Click OK to open a command prompt window.
For example, to query the bit of impurity on drive C, type:
fsutil dirty query C:
The sample output:
Volume c is dirty
Volume C: is dirtyIs the volume of your sale or it is not dirty?
The only way to disable the on a volume's dirty bit is to run chkdsk with error correction.
You can click on start, run and enter in the box:
Chkdsk /r
Click OK and answer Yes to schedule the chkdsk next time XP restarts, restart your system and keep your fingers crossed that the chkdsk /r clears the dirty bit (you may need to run once or twice).
If who disobeys, then you will need to start in the XP Recovery Console and run the chkdsk /r from there.
-
I can't start my computer in normal mode
I have a big problem with my computer. When it starts, I see a blue screen for abpout a second, and then it restarts.
It will only work in safe mode and I canoe do a system restore. Also when I tried to restore settings that he asks a different user login and password... I've never used one, sign in again.
He gave me an error code of 2000-0148... whatever it is!
I have the installation CD, but it won't let me run it in SafeMode... help please...
In Safe Mode, you can configure the computer to "clean boot" - follow the step 1 to clean boot:
http://support.Microsoft.com/kb/929135
Then see if you can boot into Normal Mode.
In addition, it can help to look at the files minidump against accidents with a debugger.
Can you zip the minidump in the C:\Windows\Minidump folder files and (provide link) available via Windows Live SkyDrive or similar site?
The following link has information about the use of Windows Live SkyDrive:
If you have problems to compress the minidump files copy the minidump files to another location such as a folder on the desktop
In addition, you do not necessarily have compress the minidump files, you can download one at a time.
-
start the computer in safe mode
hard drive detected problem iminent failure press F1 key to continue... After pressing F1 computer won't start in safe mode
so I check apparently I solve the problem. I run a system check and all is fine... I reboot my computer and I get: problem hard drive detected iminent failure press F1 to continue... boots up in safe mode only... the changes ive made did nothing because when the computer reboots, it starts again in SafeMode only. but with the networking and database drivers and the DCs as startup options. nothing seems to stick to restart the computer for the changes to take effect.
Hello
'problem detected hard disk iminent failure '.
The hard drive is faulty
Back up your data > buy a new hard drive > reinstall the operating system.
To be sure, this is the problem do the following:
Go to the website of your computer manufacturer > find specifications of hardware in your computer (hard drive) > access the Web Hard Drive from the manufacturer site > download their diagnostic software > make a Bootable disc > test your hard drive.
See you soon.
-
start the computer in safe mode and appearing automatically jump to the top of websites
Original title: appearing automatically jump to the top of websites and to hear the mouse click as sounds radomlyMicrosoft community.I have essentially two problems in my computer.(1) since almost a month my computer automatically goes into safe mode when I pass it on or restart. So, I have to change the user account to come to normal mode.(2) in addition to this since 5 days I noticed pop-up program (exactly which is the site web news.net ) in the right corner of my computer screen and it comes with random noise (similar to a mouse-click) that I mentioned earlier.I guess this program automatically installed when I tried to download another program almost a week back.I tried to remove the program using Control Panel, but it is not in the Panel.Then I ran a Kaspersky internet security scan (license and currently updated version) that was installed in my computer and then I ran Microsoft security scanner and none of them could picked up a problem.So I ran computer more secure mood.When I tried to clean the boot. I noticed only with safe mode even if the clean boot dialog box appeared options such as ok or cancel orders are not visible or they are absent (or damaged). Here, because I couldn't do the clean boot function properly.And I always get that previously mentioned his pop-up at random.So I am worrying because this could be the virus and it can harm my computer or your identity. I really appreciate if you can help me in this regard.Thank youKind regards.CharefPlease keep us updated on the issue.
Glad to know that the issue of pop-up got sorted.
I suggest you try the steps mentioned in http://answers.microsoft.com/en-us/windows/forum/windows_7-system/computer-randomly-goes-into-safe-mode/15444b39-38f5-4f2c-ae2f-a87501ee72ab?msgId=a2eefafd-93c5-4d13-b63b-0fdad30ea2a5
Let us know the results after trying the steps mentioned in the link.
-
How can I restart my computer in safe mode?
Need to put the computer in Mode safe to uninstall a program
1. reboot the computer.
2. tap on the F8 key several times when he lights everything first before entering Windows.
3. Select the Safe Mode option
Maybe you are looking for
-
I have updated to ioS 9.3.2 and now my phone won't open.
I've just updated to iOs 9.3.2. My laptop does not open. Its as if the phone crashed after the update. This happened to someone else? I was hoping that this new update would fix my Bluetooth problem and my problem of date and hour now, it seems t
-
im not able to watch movies insofar as it says install dvd set and I do not know how?
A few days ago I got this laptop, my brother sent and I tried a lot for watching movies via my laptop but it is not working at all. It is said the media player can't play cause decoder compatible DVD is not installed.
-
I have avast and not bad after a scan.
-
Use Outlook Express 6.00 to manage e-mail. Worked fine until this last week when it is able to receive emails, but sending is less error - unknown error - Protocol: SMTP Server Response: 550 your hose. 66.117242.170 is in our database of RBL. Port:
-
of Ethernet interface input queue size/81/80 (max)
Hello Anyone have the problem that the C1140 - K9W7 (or C1135) Gigabit interface sometimes "blockages" due to problems of queue (from what I understood it was the problems of queue)? I got this AP, C1140-K9W7 with IOS 12.4 (21a) JA1 and noticed that