I use an IEEE-488 GPIB connection to a keithley 2400

Similar Questions

• Connection problem-NOR-488 GPIB: connection to the driver or device error

  Hello

  I am trying to connect with my tunable laser "Santec" by GPIB-USB-HS. I received the file VI Labview (instrument driver) for my model of tunable laser STL-210 http://sine.ni.com/apps/utf8/niid_web_display.model_page?p_model_id=2791 . When I run any VI, for example the "laser_on_off.vi" file I received the error message "NOR-488: connection to the driver or a device error. I checked the 'measurement and automation explorer' and Communicator of NOR-488. 2 gives me the following message appears when I send "interrogate" send string * IDN?

  ----------------

  It is meaningless.

  You have to step way back. The Setup instructions for the GPIB-USB-HS shows you first run diagnostics. Finally, you have done this and got a failure. That's why you get "NOR-488: connection to the driver or a device error. Until the diagnostics pass, you lose everything just your time with anything else. Please provide details on the failure when you run the diagnostic tests.

• Keithley 2400 and 2000 to Windows 7 computer connection

  I have a Keithley 2400 sourcemeter and a 200 Keithley DMM connected to my computer via IEEE-488/GPIB KUSB of Keithley. When I plug the USB in my computer it does not recognize the connection, and in fact my program OR measurement and Automation does not recognize that they are connected at all. Using the help function in LABVIEW I also installed the drivers appropriate for the 2400 and 2000, but without effect. Someone has advice on how I could get these to connect to my computer? I intend to use for a test of Van der Pauw.

  Tried to contact Keithley?

  It is their equipment and I know from past experience, that they are familiar with the software NOR.

  You will get results much more quickly.

  Many people here use software and hardware. I have no personal experience with the KUSB.

• Information required to communicate with the instrument of the IEEE-488 Interface.

  Dear all,

  I have an instrument that has interface CEI-488. I would like to connect to my laptop using the GPIB-USB connector of NOR.

  In order to communicate with the data of this device and the manual, I have a licensed version of LABVIEW. But when I made contact with seller OR I learned the connector would cost me Rs. 40000 /-including software as described in the web.

  Is question 1 - necessary to buy the software with connector? or can I manage to read through LABVIEW?

  Question 2 - I read the manual of the instrument and it can be programmed using the interface IEEE 488.2 measure of LABVIEW and automation Explorer can do this by using the existing LABVIEW.

  Looking forward for a response.

  Kind regards

  Srini

  Hello

  If you have any material of LabVIEW and NI GPIB software VISA is free.

  What instrument (model and seller) you are trying to contact?

• Watlow F4 with GPIB connection

  Hello

  I have a room that uses the Watlow F4 controller with GPIB connection. I want to control it by sending a recipe of Labview. I found this driver on the Web site OR:

  http://sine.NI.com/apps/UTF8/niid_web_display.download_page?p_id_guid=0150785855373A2DE0440003BA7CCD...

  Not 100% sure it's the correct driver

  I intend to use a GPIB to USB converter. If anyone has a model of VI I could begin that would be great.

  Thank you very much

  LabView Newbie

  That looks like the correct driver.  Since it uses VISA, you should be able to use the serial or GPIB without having to change anything.  It should be an example in this driver as well as you could use as a starting point.

• Error OR 488 GPIB

  Whenever I'm trying to close my VI by using the stop button I get an error GPIB "NI 488 GPIB controller must be in charge. Can someone help me with this?

  Hi Nitzy,

  you get an error number 1, which gives 2 possible explanations!

  Perhaps an input parameter is incorrect (the first reason of error 1)? Do not see errors in your vi? How to stop the vi?

• Beginner question absolute to the Labview with GPIB connection device

  Hi all

  Firstly, sorry if my question is already posted, but I tried searching with nothing doesn't.

  My situation: I have a HP digital osciloscope, a HP 54602 B using the GPIB and trial version of labview 8.6. Now, I want to communicate with her from labview. The big question is: how? Before that I used only labview with NI DAQ card and serial port for communications of the instrument.

  the detailed question

  1 is it important (to programming in labview later) what GPIB interface that I use in my computer? Must be of OR? I still have no interface right now.

  2. I ran a search on the osciloscope Web site of NOR and find an instrument driver in:

  http://sine.NI.com/apps/UTF8/niid_web_display.download_page?p_id_guid=E3B19B3E93F7659CE034080020E748...

  . How do they come?

  3. I know there are a few examples for the GPIB, but since I do not have the interface, I can't try it. Is it possible to simulate instruments GPIB?

  Thanks for all your help and assistance

  Hi opiq;

  Welcome to the world of instrument in LabVIEW Control!  I'll try and answer your questions one-at-a-time:

  1. N ° from a point of view of LabVIEW, you can use any interface supported by VISA and your instrument bus.  This includes (but is not limited to) boards of NOR-GPIB, 3rd-party GPIB, USB, LAN, LXI, VXI, PXI, etc..  Of course, if you do not have a GPIB interface, I would recommend a NEITHER - this is the safest way to get the experience 'it works '.  I tend to use an adapter USB GPIB (DISCLAIMER - I work for the OR).
  2. You have two options for installing the device driver.  "" The simplest is in LabVIEW to select Tools "Instrumentation" instrument Drivers find... and use our instrument driver search tool which will be step helps you locate, by downloading and installing the driver.  The other option is to download the zip file, unzip it in \National Instruments\LabVIEW 8.6\instr.lib and restart LabVIEW.  So if you look in your palette of instrumentation, you should see the driver listed under instrument drivers.  The pilot will include some examples of the use of the driver (are all certified instrument drivers).

     In fact, I would recommend this driver rather than that you connected.  It is a more modern design and install examples in the viewfinder of the example ("Help" find examples...).

     Here's a video of the above process (for a different instrument, but the process is the same)

  3. Unfortunately, there is not an easy way to simulate this instrument.  I would just recommend familiarizing yourself with the examples before acquiring a GPIB interface.

• I do not use sync and am not connected? Why my favorites are synchronization?

  My desktop computer has a series of bookmarks that I use at work. My home PC has another, different set of bookmarks that I use at home. I do not use sync and am not connected to sync on each PC. Why my favorites are the synchronization between two PCs? For example, I noticed several bookmarks near the top of my bookmark menu over a line of separation that I do not have to work. I deleted them. I come home and find those missing same bookmarks from my PC at home. I do not want to synchronize anything between the two computers, why what is happening?

  Maybe an add-on is the sync these for you.

  Refresh (called "Reset" in older versions of Firefox) can solve a lot of problems in restaurant Firefox as his default factory while saving your bookmarks, history, passwords, cookies, and other essential information.

  Note: When you use this feature, you will lose all the extensions, toolbar customizations, and certain preferences. See article Firefox Refresh - reset modules and parameters for more information.

  Refresh for Firefox:

  1. Open the troubleshooting information page using one of the following methods:
     • Click the menu button

       

       click Help

       

       and select troubleshooting information. Should open a new tab containing your troubleshooting information.

     • If you are unable to access the Help menu, type Subject: support in your address bar to bring up the troubleshooting information page.
  2. At the top right of the page, you should see a button that says 'Refresh Firefox' ('reset Firefox' in older versions of Firefox). Click on it.
  3. Firefox closes. Once the update process is complete, Firefox will display a window with the imported information.
  4. Click Finish and reopen Firefox.

  This corrects the problem? Please report to us!

  Thank you.

• Using Apple ID them to connect to Macbook Pro

  Hello

  I used to be able to connect to my macbook pro with my apple ID and password. However, recently I had to restore my macbook and pure install El Capitan, and since I see no possibility to use my apple ID to sign in my macbook pro. I must necessarily use the local user name and password to connect.

  Can someone please explain the steps to activate the connection to my macbook pro using my apple id?

  This option has been drained in El Capitan. If you went to El Capitan, he would still continue but with a clean install of El Capitan, you cannot configure with your Apple ID.

• I have reset firefox because of the slow, now it says firefox is configured to use a proxy server refusing connections, what a waste! r

  I am using windows 7 Home premium. Button Firefox connected if slow to get on the internet, so I used the reset button. Now, firefox is configured to use the proxy server refusing connections, unreal... I hope you can help soon... Thank you, Donna

  you are the very welcome!

  It should be possible to select what happens when you click on an e-mail link in the applications Panel in the firefox options. For more information, see change the program used to open e-mail links

• On the screen that it says "the proxy server refuses connections" Firefox is configured to use a proxy server refusing connections. The result is no internet.

  the proxy server refuses connections"Firefox is configured to use a proxy server refusing connections. The result is no internet

  You are welcome

• I can't access my hotmail account or book a hotel since the upgrade to 3.6.8. I get the following message: "the proxy server refuses connections. Firefox is configured to use a proxy server refusing connections. Check the proxy settings for

  I can't access my hotmail account among some other sites since the upgrade to 3.6.8 on my macbook. I get the following message: "the proxy server refuses connections. Firefox is configured to use a proxy server refusing connections. Check the proxy settings to make sure they are correct. Contact your network administrator to make sure that the proxy server is running. "I can not even find the proxy settings more.

  Windows: Tools > Options > advanced > network > settings
  OSX: Firefox > Preferences > advanced > network > settings
  Linux: edition > Preferences > advanced > network > settings
  Set your settings to connect to the 'No proxy', if you are not using a proxy.

  Firefox 3.6.6 added a new preference for connection settings, use proxy Panel"system settings", and the default value is the point. " This new preference does not affect most users, because they probably do not have a proxy set in place in their operating system. Therefore, most users should use the setting "no proxy".

• My IPad 2 Air is mad, he gets on its own, and it freezes. Not to mention it locks me. Didn't this iPad for 2 days. Have not been able to use it! I tried connecting to ITunes and will not work!

  My IPad 2 Air is mad, he gets on its own, and it freezes. Not to mention it locks me. Didn't this iPad for 2 days. Have not been able to use it! I tried connecting to ITunes and will not work!

  Hi Kareyfabela,

  For this kind of problem, I strongly recommended opening a pension with Apple iPad case will probably require inspection by an Apple engineer. You can open a file on this site: https://www.apple.com/support/contact/

  I hope this helps!

  Jonty

• How old, a driver can be used with the USB-GPIB controller?

  Hello, I have a litter of Nicolet who I'm trying to control using an NI USB-GPIB controller and a Nicolet provided the program. The software were made in 1995 and told me it was made to work with the NI AT-gpib cards and I would need to use a pilot more OLD, BUT I don't have access to one of these cards for a purchased a USB-GPIB, hoping that it would work. A pilot more FORMER will support the GPIB-USB?

  Sorry for you, but not

  This is a really old software and works only on the driver to the gpib.

  Written in LabVIEW software would go from before this date.

• How can I connect to my server (which runs on windows server 2008 rc2) via IP REAL using rdp, while the VPN connection is active?

  Hello

  How can I connect to my sServer (which runs on windows server 2008 rc2) via IP REAL using rdp, while the VPN connection is active?
  

  Hello Marie Smith.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the link below.

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads/

  Hope this information helps.