I use display spectral pitch to analyze changes people´s speech (for research purposes). I need the visuals of interesting changes to the basic blue line to document my results in the articles. It is a more sophisticated way to th

Similar Questions

• The latest 33.0 firefox does not display plugin tamper data. I need the plug-in for research purposes

  I had to use data tamper plugin for my current assignment on software security. The plug-in has been successfully installed, but it is not displayed. I do everything wrong or if not is there a problem with the new firefox?

  Have you been using Tamper Data extension in an earlier version of Firefox?

  Is the problem that there is no visible way to display or configure Tamper Data? I do not use this extension myself, but in General, you can check the following locations:

  (1) menu Tools

  To display the classic menu bar temporarily, press the ALT key. To persist, after tapping Alt, use the view > toolbars > Menu bar

  (2) menu developer tools - in the case, it fits now here

  • button '3-bar' menu > developer
  • menu bar: Tools > Web Developer

  (3) buttons not used - in which case it has a button that is not on a toolbar

  Use the personalization feature to check the buttons available and made dragging to the desired location. See: Customize Firefox commands, buttons, and toolbars.

  Can you find a way to run it?

• With the help of the meter from 6525 to measure the frequency: is there a more orderly way?

  I am currently using the high speed on a module USB 6525 meter to measure the frequency of an object in rotation via a sensor hall-effect.

  I was wondering if there was a simpler way / more effective this encoding than that?

  Everything that I currently perform the current meter reading, wait a second, take another reading, and subtract one from the other. The result is the frequency in hertz.

  Is there a way to get the 6525 to return the number / change County after 1 second?

  Thank you

  

  On the 6525, you have a country of the event and you can't make a measure of frequency.

• I bought this and downloaded but it disappears when installing and just used to install at all! help I need for my course and need the work done ASAP!

  When I click to install it starts but within a few seconds it just closes and do anything I clicked on it again and same thing, it's ridiculous since just paid money for her iv

  The Adobe ID as part of the Forum is not no matter what CC placed under it, please let us know how you bought. You can cancel online only when you purchase online through the Adobe Store.

  Concerning

  Baudier

• Computer has a black screen and does not show the normal startup logo and more

  The computer that I use usually works well, until the next day, the day that I used it, ruined everything. My computer shows not the Windows 7 logo normal at startup, but instead, a bar with green lines in movement like the ones you see in older versions (Windows Vista), but now only the bar and did no logo in it and after starting does not display. It shows a completely black screen, but it makes a noise like the sound when she welcomes you to Windows 7. I tried safe mode and disabled the NVIDIA GeForce GT 220 graphics card and the screen works, but he is stuck at 800 x 600. In addition, the start screen is always the bar. How can I fix it? (Tried updating the gpu but still displayed black screen)

  Hello Rafael,.

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  What is the brand and model of your computer?

  Thank you for details on the issue.

  This problem may occur because of corrupted display driver.

  I suggest to start your computer in safe mode, uninstall the display driver, restart your computer in normal mode

  mode and update driver from the website of the manufacturer of the computer display.

  Please see this link:
  Why my screen is black when I start Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  Important notes:
  Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry#1TC=Windows-7

  When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Apex: button to add dynamic date and user for the article page

  [warning... post newbie]

  I have a simple table of questions and actions.

  users change/update records using the form on a table with the report.

  There is a comments column to record the latest updates; users must add their name and the date at the top.

  I am currently using a button that calls a dynamic action to execute javascript to insert the date and the user at the top of the text in the field comments (UPDATES_NEW_ON_TOP)

  problems:

  1 Insert date works on firefox/chrome but not IE

  2. can't seem to find the right code to insert the currently logged in user name

  extract javascript below...

  Notes:

  -After reviewing the packaged applications I see more elegant ways to do this but we are going the long way to learn stuff

  -the JavaScript below is probably very poorly formed - apologies if it upsets anyones sensitivities of coding

  -open to any means to achieve the desired result

  beer on me for any assistance that you can give

  var d = new Date();

  var monthNames = ["Jan", "Feb", "Mar", "Apr", "May", "Jun",]

  "Jul", "Aug", "Sep", "Oct", "Nov", "December"];

  document.getElementById("P3_UPDATES_NEW_ON_TOP").innerHTML =.

  d.getDate () + ' - ' +.

  monthNames [d.getMonth ()] + ' - ' +.

  "" d.getFullYear () + ": [ID] +.

  String.fromCharCode(0)) (13) + string.fromCharCode(0)) (13) + P3_UPDATES_NEW_ON_TOP.value;

  ;

  Thank you all for your contributions and redirects

• Reload the article upward at the output

  Hello

  On my folio configuration, when users scroll down an article and then across to the next article, is in any way do previous article (which I just left) scrolling back to the top, so when I scroll back, I show the first page of this article, rather than the page that I have left?

  For example, if I leave the article 1 on page c - I in article 2 on page one. If I scroll back, I currently go back to article 1 page c - but want to back by scanning in article 1 page a. Hope that makes sense - it's just be confused where I am in the document if the scroll back.

  I hope you guys can help,

  Thank you

  Simon

  There is no automatic way to do this. You can add a button on the page with a destination of "navto://relative/reset" and that will reset the folio at the beginning, but there is no automatic way to do it.

  Neil

• Change the spectral brightness of the display of pitch for quiet recordings

  Hello

  I found that for the quiet sections of records, display of spectral pitch is almost invisible. Is there a way to increase the brightness?

  Processing the audio to slap on an extra 10-30 dB of volume is my solution for now, but I am not very happy with that. This means that I have to switch between the processed version to see the spectral display and the original for the actual work. The record in question is a concert of classical music, so the difference between strong and calm passages is sometimes substantial.

  Thank you

  3 P.

  In preferences / spectral display try changing the decibel range. He normally default 132dB which is normally enough range to show the low audio level, but you can try different values.

• I use Origami as my screensaver and changing images quickly, is there a way to slow the progression from one slide to another?

  I use Origami as my screensaver and changing images quickly, is there a way to slow the progression from one slide to another?

  Check in system preferences > Desk Top & screensaver:

  

  Ciao.

• I want to use an iPod touch to play my iTunes music in my car. To do this music must be stored on the iPod. It seems more has no way to do it. Is there a solution?

  I want to use an iPod touch to play my iTunes music in my car. To do this music must be stored on the iPod. It seems more has no way to do it. Is there a solution?

  Refer to the chapter of the manual music

  9.1 iOS iPod Touch User Guide

  See also:

  I get message says: CONNECT to THE WI FI TO PLAY music.

• Computer crash xp pro have attempted to use the console to restore windows, but im not a good enough geek to type orders correctly is a more automated way to boot from the CD to reinstall the CD?

  Computer crash xp pro have attempted to use the console to restore windows, but im not a good enough geek to type orders correctly is a more automated way to boot from the CD to reinstall the CD?  There is a lot of argument about deplacerb help pages the correct process and commands to use I don't want to do more damage.

  Thank you

  Hello

  I suggest you to visit these links and check if it helps:

  How to install and use the Recovery Console in Windows XP:
  http://support.Microsoft.com/kb/307654

  Description of the Windows XP Recovery Console for advanced users:
  http://support.Microsoft.com/kb/314058

  How to perform an upgrade on the spot (reinstallation) of Windows XP:
  http://support.Microsoft.com/kb/978788

  Check if that helps.

• The easy/more faster way to change my IP address?

  Using a DSL with an Actiontec GT784. So far, I had to turn off the modem for a few seconds I don't have the password. Is there an easier way to do this?  Using a DSL connection.  Up til now I had to turn off the modem for a few seconds.  Its an Actiontec 701 d.

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you do not want to change your IP address.

  You can try the steps below and check.

  1. find your IP from the ISP.

  2 copy.

  3. open network & sharing Center

  4. open the network properties you what your IP to change. In my case, it's an EVDO modem.

  5. on the network tab, double-click TCP/IPv4, which will open a window to change the IP and DNS IP address.

  6. in this window click on "use following IP address" and paste this IP address you copied in step 2.

  7 change the last digit of the IP address to any value above him for example if its 192.168.23.123 change the last digit to something like 122 so that the IP address becomes 192.168.23.122.

  8. click on OK until that close all windows.

  9 disconnect from this network.

  10 reconnect to this network and if it goes as planned the ISP should force a dynamic IP address.

  Now, check if you have changed the IP address. If you can not browse, go to step 6, and then select "Obtain an IP address automatically" and then disconnect-> reconnect to the network.

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• BlackBerry smartphones ' you have used all your available device pin changes for your My World account.

  I recently replaced my BB Tour Sprint with Sprint, and when you try to reinstall my apps world bought for BB looks like this: "you have used all your available device pin changes for your My World account.» I'm getting this error when I try to use my BB Tour with the NEW PIN {led by privacy}, the email account used is {under the direction of privacy} a way to solve this issue? I had a few exchanges with Sprint, because Tour trackball problems. I enjoy using App World, however I can't buy something again or recover my previous purchases with this error. My previous PIN is 30BE5BD9 (I got to the list because the BB tech support link listed my new PIN invalid - as well as my old pin code). Please notify.

  PS: Crackberry App World made a PIN exchange a simple question - simply plug your new PIN and you can easily recover your purchased applications. RIM's App World support really dropped the ball on this one - there are a lot of tricks of BB exchanged and this App World problem really needs to be rectified. There were already several messages on this forum about it, and the owners are not able to submit their complaint to the BB technical support because the link would not accept their new PIN! Shame on you RIM.

  Hello!

  There is actually a fix for all your questions, but the first that needs to be fixed is the answer to bad PIN code on the RIM support site. However, this hotfix cannot be displayed publicly. Therefore, please check your private Messages on this site for a PM from me with these instructions.

  BTW - if you think also that your message has been changed by the mods to delete any personal information (pines, e-mail addresses, etc.). .. as a public forum, it is generally not a good idea to post them here. In addition, these forums are a user to channel... support not a portal user-to-RIM...

  See you soon!

• Div id changing icons: hide the article, move to the top of line... etc are disappear.

  Hi, I have change div id icons: hide the article, move to the top of line... etc are disappear.

  I also did Global mediaquery #newname, 481, and 769.

  Why and how?

  Concerning

  Tom

  You don't give enough details to understand the problem. A proposal, however, you use a fluid grid layout. For the icons to display, the element must have class = "liquid" in the opening tag.

• How can I change the page size of a pdf document so that I can check on my iphone more clearly?

  How can I change the page size of a pdf document so that I can check on my iphone more clearly?

  This is way beyond what can be done with PDF, except by copying the text and make a new document in Word or something.

  That said, Adobe Reader on Windows may display the text AS IF the PDF file has been divided. It's the text reformatting. It may be possible in Reader for iPhone, you can try the player for ios forum.