I use nightly. My system is 64 bit. The tabs may not close. Please check.

Similar Questions

• During the closure of 2 windows (with several tabs), restore the system does restore properly the tabs in the window of the second. Is this a bug in the new update / all ideas to fix?

  I regularly use 2 windows with multiple tabs of each and session restore would work to bring them all back, but after this last updated the second window restores correctly, with the first non-visible tab on top (only in the menu drop-down) and now the button add a tab on the left (instead of right). Add a button to the tab is not really as far as concerns the other than it indicates other problems with the tabs in the 2nd window. No no not the 1st tab visible is frustrating, because I can't move or also easily navigate. Also, the tabs on the top of the 2nd window which are visible is no longer have the 'x' to close visible, except when this tab is selected. I'm assuming that it is a problem with the new version/update, since this is the first time I encountered the problem, and I closed and restored Firefox several times to make sure it was a recurring problem and not a one-time problem. Any ideas on how to fix would be welcome (except maybe cramming my tabs on a window or it suck XD).

  Thank you for your help. None of your suggested solutions worked, but having just updated to 10.0.2 seems to have solved the problem.

• How can I instill the microphone into my computer toshiba satellite, I have windows 7 32 bit, the microphone was not found in the device maneger?

  How can I instill the microphone into my computer toshiba satellite, I have windows 7 32 bit, the microphone was not found in the device maneger?

  Go to the Toshiba support site and search page of your PC/computer laptop.

  Download and then install the last set of specific drivers for W7.

  See you soon,.
  Jerry

• Error - Windows cannot read the disk in drive F:\-Assurez-vous that the disc uses a format Windows recognizes. If the drive is not formatted, you must format it before you use it

  Original title - Windows cannot read blank disc

  When I insert a blank DVD-R disc for burning, an error is indicated - "Windows cannot read the disk in drive F:\-Assurez-vous that the disc uses a format Windows recognizes." If the drive is not formatted, you must format it before you use it. "So I can't burn a DVD-R disc... But if I use the DVD-RW drive, it can be burned smoothly without any problems... Windows cannot recognize only the DVD-R disc... My DVD - RW driver is Sony Optiarc AD - 7280S. When I use Windows 7 without problem was found in the burning a DVD-R disc. But after using Windows 8, I can't burn a DVD-R disc. So please help me...

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you have a problem with the disc.

  As you mentioned that you have tried the steps of troubleshooting mentioned in this thread.

  I suggest you run the Fix-it tool and check if it helps.

  This tool diagnosis and repair CD or DVD drive issues, when you can not burn or play CD or DVD discs when a disc is not found, not available or not connected.

  See the link below.
  https://support.Microsoft.com/en-us/mats/cd_dvd_drive_problems?WA=wsignin1.0

  As we have tried most of the troubleshooting steps to resolve this problem, and if the problem persists after you run the tool fix - it also. So, I suggest to get in contact with equipment manufacturers , because they will be the best person to help you.

  Hope this information helps. Please let us know if you need additional assistance. We will be happy to help you.

• I installed Acrobat 8 Professional 32-bit version and my computer is 64-bit, the program does not run correctly and I want to uninstall the 32-bit version and re-install the 64-bit version, I can't find the download of US feed for Acrobat 8 Professional,

  I installed Acrobat 8 Professional 32-bit version and my computer is 64-bit, the program does not run correctly and I want to uninstall the 32-bit version and re-install the 64-bit version, I can't find US downloading feed for Acrobat Professional 8, any suggestions

  Hello

  Please see below the link to download: -.

  https://helpx.Adobe.com/Acrobat/KB/Acrobat-8-9-product-downloads.html

• CD is not compatible with XP, why? I can't pass the data information of my new HP with Vista professional in my other, older __Dell computers using XP iperating system. It makes the CD a bit useless.

  I don't understand why I can't pass data as a file in Quicken to my new HP computer using the CD of my old Dell computer with the XP operating system.  I have to use thumb devices to transfer data.  What is a reason that they cannot be compatible.

  Read the section on using disks of different CD players or format to ISO for older computers

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD

  If your computer is equipped with a CD or DVD burner, you can copy files to a recordable disc. This process is called burning a disc. By default, Windows Burns discs in the active file system format, but you can also choose to burn discs in ISO image format.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://Windows.Microsoft.com/en-us/Windows-Vista/disc-burning-frequently-asked-questions

  Why are there two different ways to format a disc?

  You can choose between the formats of live file system and mastered during the creation of a new recordable disc because each of these formats is used for different purposes. The default choice is the active file system because it is a more convenient way to create a disc. When you use a Live file system disc, files are copied to the disk immediately. When you use the ISO image format, the files are stored in a "transit zone" until you decide to burn the disc.

  When you use the system format active files with rewritable discs, such as CD - RW and DVD - RW, you can also erase unwanted files from a disc to recover space, which is not possible with mastered discs. On the other hand, mastered discs are more compatible with older computers, previous versions of Windows, and other devices such as CD and DVD players. For more information, see which CD or DVD format should I use?

  See you soon.

  Mick Murphy - Microsoft partner

• My system is 64 bit, but I can not get the correct version of Adobe Creative Cloud

  I always get the creative cloud of 32 bits, but my system is 64 bit, how to get the right version

  Try the installer direct download. Follow the instructions to download or access will be refused. Download the 64-bit Installer,

  Direct download links of Adobe CC 2015: 2015 creative cloud release | ProDesignTools

• After retrieving the system for a month, the tabs are recovered for a month there are too

  Furthermore, I guess, all my settings are retrieved from a month there, but I noticed that the tabs. I guess, the recovery of the system retrieves the AppData folder, there are a Firefox settings. It's okey if I have no problems with my system, but I have... many of them. In the opera, the system recovery does not crash my tabs, Favorites, or something else, even if its settings are in the AppData.
  What should I do to avoid this behaivour reset settings? Is - this deficit SQLLite?

  The extension of the Session Manager has options (1) create a backup when you exit Firefox and (2) locate in a different folder. I have not tested, but could be useful for you.

  • https://addons.Mozilla.org/firefox/addon/session-manager/
  • http://sessionManager.mozdev.org/options.html#advanced ("helps users replace the default location to store saved sessions")

• using firefox 24, yahoo toolbar disappears and the keyboard does not work on some websites

  We have installed firefox 24, yahoo toolbar sometimes disappears. On some web site when trying to enter a password, the keyboard does not work until you double click of the mouse on the registration form. This on two different systems of windows 7. Each thin seemed to work fine before the update prior to the installation of 24.

  Hello

  Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • Under Windows, you can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac, you can open Firefox 4.0 + in Safe Mode holding the key option key when starting Firefox.
  • Under Linux, you can open Firefox 4.0 + with leaving Firefox then go to your Terminal and running Safe Mode: firefox-safe-mode (you may need to specify the installation path of Firefox for example/usr/lib/firefox)
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  

  Once you get the pop-up, simply select "" boot mode safe. "

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. It might help others who have the same problem.

  I hope this helps!

  Curtis

• Tecra A2 ACPI question - systems of scaling of the CPU do not work

  Hi *.

  I have Toshiba Tecra A2. It works very well for a year and a half, but now I have some problems. Apparently in ACPI problem. I use SuSE Linux (10.1), but I also have Windows XP Pro on this machine. In both CPU scaling systems do not work.

  Also, when I try to reboot both systems can stop, but then (I thing that it is the BIOS time) just shut down. I can only hold the power button for 5 seconds and material poweroff. I update the bios to version 1.4, set default values, but noting help.

  Any idea? And not only that, is possible to ask Toshiba support center any problem by mail or telephone?

  Thank you
  Branimir Ackovic

  Hi Branimir

  I'm don't know if someone will help you because Linux is not supported for operating system. Your device has two operating systems and also start Manager and there is no standard situation after discount and supported OS is there without any other substance.

  On this path, it is not easy to make a serious diagnosis, but you can try to contact the hotline of Toshiba. Please see the official page of Toshiba Europe under http://eu.computers.toshiba-europe.com

  I put t know in which country you live, but you can also try to contact authorized partner. Addresses you will find under http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?pf=true

  Good luck!

• running MSN messenger 7.5 but sighn as 'old version' used o/s = from Vista 32-bit, stand alone Messenger to it please help

  Windows Vist 32 operating systems

  Hello

  
  You need to contact MSN Support for assistance.
  http://support.Microsoft.com/kb/940784
  
  Hope this information helps.
  
   

• Why doea the power icon disappear whenever the system is updated. The taskbar notification area, I cannot check the power.

  Taskbar icon disappears

  Hello

  1 Please reboot nothing so interfere with this process.

  Click with the right button on Taskbar - Properties - tab Notification area - check box Volume - if it is grayed out
  Then, use this link.

  How to enable or disable the Notification area system icons in Vista
  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

  If necessary: a Mr Fixit

  System icons do not appear in the notification area in Windows Vista or in Windows 7 until you
  Restart the computer
  http://support.Microsoft.com/default.aspx/KB/945011

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Delete system 32 files, now the computer does not work.

  Hi all, I received a virus there is a day of a program called Internet Security 2010 for me (I think it's an advanced antivirus remover or something a long these lines..)

  In the case, I did a scan of the system with AVG and BitDefender, nor presented with something else that the virus still persists. I took to google and then made to spybot, once you have downloaded and installed, spybot was the source of my problems and showed that helper32.dll and smss.exe in my System32 folder where the two infected. Knowing this, I deleted both of these files, but some issues (such as Mozilla blockin automatically to sites like facebook)... I advanced and downloaded malwarebytes. ... I run another scan encounted three more errors, helper.dll has been infected, still, so I tried to delete it once more, but I need permission to do so.

  In a stupid gesture, I moved into my office, almost desperately tryin to get rid of, renames, tried to remove it, permission, so now there remained
  I've renamed helper32.dll and put back into System32 filefolder. I also downloaded Microsoft Security Essentials.

  In the case, something, I think in my registry, or maybe in my services I messed up, because whenever I connect to my computer, I get a popup of the saying of the toolbar "Windows could not run services" and something to reject llimited to users to access certain things. " In addition, my internet does not connect and says "service incorporate or group does not" or something of the sort.

  I have remove the somethingI wasn't supposed to? How can I change? In addition, the system restore will not work and keeps telling me an unknown error occurred and tells me to pick another point to restore, but says that with every point, I try to restore, as well, I have no backup of windows.

  For the record, I am running Vista 32-bit Home.

  Can someone help me?

  Hi Anarchoi,

  You are able to get to a command prompt?  If so, run SFC/scannow to replace missing or damaged files.  Let us know if that helps.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Pro XI install error on Win 7 64 bit "the application could not start properly.

  I am trying to install Acrobat Pro XI, one a computer running Windows 7 64 bit

  Before I install I get the following error:

  "

  I left the facility and ran vc_red from the CD from Adobe.

  Started to install Acrobat XI and got the same error.

  I left the facility and installed vcredist_x64 (Visual C++ 2010 SP1 downloaded from the Microsoft Download Center)

  Started the installation of Adobe Pro XI and the same error came.

  Has decided to proceed with the installation.

  Once installation finished, got the following error:

  

  Closed the error by clicking on 'OK' and clicked on finish in the installation window.

  I have tried to run Acrobat and got the same error as above, except that it says error acrobat.exe - application instead of the application error - acrodist.exe.

  Restart PC-same mistake

  Used Adobe utility cleaning

  Reloaded PC

  Reinstalled Acrobat Pro XI

  Same error

  I did a reinstall of Windows 7 64 bit and installed Acrobat XI pro before I was running Windows updates. Don't know if updates were the cause of the problem before or not, but Acrobat is installed and is functioning normally.

• Windows 7 64-bit - the wallpaper is not displayed

  First: sorry for my bad English (I'm from the Germany)

  My wallpaper on my Satellite L670-11R (Windows 7 Home Premium) is not in the list. I don't see backgroundcolor I can change as I have an image set as wallpaper in the properties. When I shut down my computer, I can see the wallpaper for a while and when I switch to another user I have no problem with him and I can change my wallpaper it.
  What can be the reason for this problem? How can I solve this problem.

  I expect an answer.

  Timon

  null

  Hi timon.

  To be honest I am using Windows 7 now more a year and wallpapers, but I never noticed this problem.
  You can see the wallpaper if you change the theme of Windows or you have installed themes 3rd party?

  In my opinion there is nothing to do with Toshiba and it s a Microsoft problem. Therefore, you must contact Microsoft or a Microsoft support forum. I m that they can give you a good answer! :)