I use the backup that had the 5 c in my old iPhone 4?

Similar Questions

• Waiting for redo log file missing when restore main database using RMAN backup that was taken on the database physical standby

  Here's my question after tons of research and test without have the right solutions.

  Target:

  (1) I have a 12.1.0.2 database unique main enterprise 'testdb' as database instance running on the server "node1".

  (2) I created physical standby database "stbydb" on the server "node2".

  (3) DataGuard running on the mode of MaxAvailability (SYNC) with roll forward in real time 12 default c apply.

  (4) primary database has 3 groups of one-man redo. (/oraredo/testdb/redo01.log redo02.log redo03.log)

  (5) I've created 4 standby redo logfiles (/oraredo/testdb/stby01.log stby02.log stby03.log stby04.log)

  (6) I do RMAN backup (database and archivelog) on the site of relief only.

  (7) I want to use this backup for full restore of the database on the primary database.

  He is a DR test to simulate the scenario that has lost every primary & Eve total servers.

  Here is how to save, on the database pending:

  (1) performance 'alter database recover managed standby database Cancel' to ensure that compatible data files

  (2) RMAN > backup database;

  (3) RMAN > backup archivelog all;

  I got elements of backup and copied to primary db Server something like:

  /Home/Oracle/backupset/o1_mf_nnndf_TAG20151002T133329_c0xq099p_.BKP (data files)

  /Home/Oracle/backupset/o1_mf_ncsnf_TAG20151002T133329_c0xq0sgz_.BKP (spfile & controlfile)

  /Home/Oracle/backupset/o1_mf_annnn_TAG20151002T133357_c0xq15xf_.BKP (archivelogs)

  So here's how to restore, on the main site:

  I clean all the files (data files, controlfiles oder all gone).

  (1) restore spfile from pfile

  RMAN > startup nomount

  RMAN > restore spfile from pfile ' / home/oracle/pfile.txt' to ' / home/oracle/backupset/o1_mf_ncsnf_TAG20151002T133329_c0xq0sgz_.bkp';

  (2) modify pfile to convert to db primary content. pFile shows below

  *.audit_file_dest='/opt/Oracle/DB/admin/testdb/adump '

  * .audit_trail = "db".

  * full = '12.1.0.2.0'

  *.control_files='/oradata/testdb/control01.ctl','/orafra/testdb/control02.ctl'

  * .db_block_size = 8192

  * .db_domain = "

  *.db_file_name_convert='/testdb/','/testdb /'

  * .db_name = "testdb".

  * .db_recovery_file_dest ='/ orafra'

  * .db_recovery_file_dest_size = 10737418240

  * .db_unique_name = "testdb".

  *.diagnostic_dest='/opt/Oracle/DB '

  * .fal_server = "stbydb".

  * .log_archive_config = 'dg_config = (testdb, stbydb)'

  * .log_archive_dest_2 = "service = stbydb SYNC valid_for = (ONLINE_LOGFILE, PRIMARY_ROLE) db_unique_name = stbydb'"

  * .log_archive_dest_state_2 = 'ENABLE '.

  *.log_file_name_convert='/testdb/','/testdb /'

  * .memory_target = 1800 m

  * .open_cursors = 300

  * runoff = 300

  * .remote_login_passwordfile = "EXCLUSIVE."

  * .standby_file_management = "AUTO".

  * .undo_tablespace = "UNDOTBS1.

  (3) restart db with updated file pfile

  SQLPLUS > create spfile from pfile='/home/oracle/pfile.txt'

  SQLPLUS > the judgment

  SQLPLUS > startup nomount

  (4) restore controlfile

  RMAN > restore primary controlfile to ' / home/oracle/backupset/o1_mf_ncsnf_TAG20151002T133329_c0xq0sgz_.bkp';

  RMAN > change the editing of the database

  (5) all elements of backup catalog

  RMAN > catalog starts by ' / home/oracle/backupset / '.

  (6) restore and recover the database

  RMAN > restore database;

  RMAN > recover database until the SNA XXXXXX; (this YVERT is the maximum in archivelog backups that extends beyond the scn of the backup of the data file)

  (7) open resetlogs

  RMAN > alter database open resetlogs;

  Everything seems perfect, except one of the file log roll forward pending is not generated

  SQL > select * from v$ standby_log;

  ERROR:

  ORA-00308: cannot open archived log ' / oraredo/testdb/stby01.log'

  ORA-27037: unable to get file status

  Linux-x86_64 error: 2: no such file or directory

  Additional information: 3

  no selected line

  I intended to use the same backup to restore primary basic & helps record traffic and the downtime between them in the world of real output.

  So I have exactly the same steps (except STANDBY restore CONTROLFILE and not recover after database restore) to restore the database pending.

  And I got the same missing log file.

  The problem is:

  (1) complete alert.log filled with this error, not the concern here

  (2) now repeat it in real time apply won't work since the Party shall LGWR shows always "WAITING_FOR_LOG."

  (3) I can't delete and re-create this log file

  Then I tried several and found:

  The missing standby logfile was still 'ACTIVE' at present RMAN backup was made.

  For example, on db standby, under Group #4 (stby01.log) would be lost after the restoration.

  SQL > select GROUP #, SEQUENCE #, USE (s), the STATUS from v$ standby_log;

  GROUP # SEQUENCE # USED STATUS

  ---------- ---------- ---------- ----------

  4 19 ACTIVE 133632

  5 0 0 UNASSIGNED

  6 0 0 not ASSIGNED

  7 0 0 UNASSIGNED

  So until I take the backup, I tried on the primary database:

  SQL > alter system set log_archive_dest_state_2 = delay;

  This was the Group of standby_log side Eve #4 was released:

  SQL > select GROUP #, SEQUENCE #, USE (s), the STATUS from v$ standby_log;

  GROUP # SEQUENCE # USED STATUS

  ---------- ---------- ---------- ----------

  4 0 0 UNASSIGNED

  5 0 0 UNASSIGNED

  6 0 0 not ASSIGNED

  7 0 0 UNASSIGNED

  Then, the backup has been restored correctly without missing standby logfile.

  However, to change this primary database means break DataGuard protection when you perform the backup. It's not accept on the production environment.

  Finally, my real questions come:

  (1) what I do may not do on parameter change?

  (2) I know I can re-create the control file to redo before delete and then recreate after. Is there any simple/fast to avoid the standby logfile lost or recreate the lost one?

  I understand that there are a number of ways to circumvent this. Something to keep a copy of the log file waiting restoration progress and copy up one missing, etc, etc...

  And yes I always have done no real-time applies "to the aid of archived logfile" but is also not accept mode of protection of production.

  I just want proof that the design (which is displayed in a few oracle doc Doc ID 602299.1 is one of those) that backs up data backup works effectively and can be used to restore the two site. And it may be without spending more time to resume backups or put the load on the primary database to create the database before.

  Your idea is very much appreciated.

  Thank you!

  Hello

  1--> when I take via RMAN backup, RMAN does not redo log (ORL or SRL) file, so we cannot expect ORLs or SRL would be restored.

  2nd--> when we opened the ORL database should be deleted and created

  3rd--> Expecting, SRL should not be an issue.we should be able to do away with the fall.

  DR sys@cdb01 SQL > select THREAD #, SEQUENCE #, GROUP #, STATUS from v$ standby_log;

  THREAD # SEQUENCE # GROUP # STATUS

  ---------- ---------- ---------- ----------

  1 233 4 ACTIVE

  1 238 5 ACTIVE

  DR sys@cdb01 SQL > select * from v$ logfile;

  GROUP # STATUS TYPE MEMBER IS_ CON_ID

  ---------- ------- ------- ------------------------------ --- ----------

  3 /u03/cdb01/cdb01/redo03.log no. 0 online

  /U03/cdb01/cdb01/redo02.log no. 0 2 online

  1 /u03/cdb01/cdb01/redo01.log no. 0 online

  4 /u03/cdb01/cdb01/stdredo01.log WATCH No. 0

  /U03/cdb01/cdb01/stdredo02.log EVE 5 No. 0

  DR sys@cdb01 SQL > ! ls - ltr /u03/cdb01/cdb01/stdredo01.log

  method: cannot access the /u03/cdb01/cdb01/stdredo01.log: no such file or directory

  DR sys@cdb01 SQL >! ls - ltr /u03/cdb01/cdb01/stdredo02.log

  -rw - r-. 1 oracle oinstall 52429312 17 Oct 15:32 /u03/cdb01/cdb01/stdredo02.log

  DR sys@cdb01 SQL > alter database force claire logfile 4;

  change the database group claire logfile 4

  *

  ERROR on line 1:

  ORA-01156: recovery or current flashback may need access to files

  DR sys@cdb01 SQL > alter database recover managed standby database cancel;

  Database altered.

  DR sys@cdb01 SQL > change the database group claire logfile 4;

  Database altered.

  DR sys@cdb01 SQL > ! ls - ltr /u03/cdb01/cdb01/stdredo01.log

  -rw - r-. 1 oracle oinstall 52429312 17 Oct 15:33 /u03/cdb01/cdb01/stdredo01.log

  DR sys@cdb01 SQL >

  If you do, you can recreate the controlfile without waiting for redo log entry...

  If you still think it's something is not acceptable, you must have SR with support to analyze why he does not abandon SRL when controlfile_type is "underway".

  Thank you

• I have adapters and a power converter, but has been told by someone who travels internationally that the block performs the conversion of power for me.  I want to assure that I do not blow on my phone.  Use the power converter to charge my iphone and appl

  I have adapters and converter of power for international travel.  I was told by someone who often visits that the converter is not necessary for apple products.  I don't want to ruin my phone or watch - can I use my power converter?

  If you use the Apple adapter supplied, you will simply need an adapter to use in other countries. The adapter can be used with voltages between 100-240 v AC 50-60 Hz

• I can't activate my real Vista on 'New' material by using the hard drive of my old hardware

  OK, I got a laptop comes pre-loaded with windows Vista and it has got water damage and shorted, the hard drive however is in good working condition. I bought a laptop replacement because I didn't want to be on another computer that someone else would break anyway.

  so I bought this used the laptop from a friend that he would use to intnet and games, she had similar specs as my old laptop except the proccessor was different but similar speed and what not. what I want to do is to install the hard drive from my old with Vista genuine in this 'new' computer that has a hard drive in a way smaller and is loaded with XP.

  compatible sound and I have already, but it asks me for my product key that I have but it says its wrong (I guess as its headquarters in the old hardware) so is there a way to unregister the old hardware or upgrade my hardware information in order to use my old hard drive and keep my status as a true?

  not only is a HDD larger but its quicker and there all my files ive been without for more than a year now and frankly I need it back so bad at this point

  Thank you thank you

  Sorry, but versions OEM of Windows Vista cannot be transferred to another computer.  The license is permanently tied to the original computer, it has been installed and activated on. Carey Frisch

• How to use the headphones cable and load on iphone 7?

  I am very interested in th new IPhone but I'm not clear on how couldn't I maintain the main use that I have now with it.

  In many cases, I use my headset while I load the Iphone:

  -audio conversation at the end of the day when the battery is low and he needs to reload

  -When chat or listen to music while using my phone as a modem, with usb cable (otherwise as this function drains the battery quickly impossible)

  Also, I tried to use a Bluetooth headset but frankly I prefer questions from the cable to the battery ones (always unloaded when you have an important conference call) and the sound quality not so good

  So the question is simple: Apple will offer, for a reasonable price, a lightweight port Doubler ? It's the only solution I see, even if painful compared to the current iPhone (risk of losing the adapter, may not be comfortable in a Pocket / may damage the Iphone port...)

  Ulysse311 wrote:

  .. So the question is simple: Apple will offer, for a reasonable price, a lightweight port Doubler ?...

  Hello

  It is a community of support based on the user.

  If you wish to submit comments or suggestions to Apple, you can do it here:

  https://www.Apple.com/feedback/iPhone.html

• How can I use the USB OTG key with my iphone more than 6 s?

  Hello dear,

  Unfortunately, IPhone is not support OTG flash drive with is very important to me and I want to know if there is a way to make it active or not at all!

  Would you please place a comment on that?

  Thank you

  Adel

  The iPhone does not support cables flash drives that you have discovered, but there are a variety of wireless readers that can be used with it in a similar way, this one for example:

  http://www.Amazon.com/SanDisk-wireless-smartphones-computers-SDWS4-064G-G46/DP/B 00ZCFYF2W/ref = sr_1_1? s = pc & ie = UTF8 & qid = 1458322490 & sr = 1-1 & keywords = wireless + flash + drive

• I come from components to build a new computer. Try to use the Windows XP Pro computer old version but after BIOS and XP installation I get the error "file not found \i386\ntkrnlmp.exe. The error code is 7. "What should I do?

  New components is a new computer.
  Inserted the XP Pro CD in the drive but get the error "file not found \i386\ntkrnlmp.exe. The error code is 7. »
  Rebooted comp 5 times with the same problem after BIOS.

  Hi Milkshake83,

  Thanks for posting. Proceed as follows for this error.

  Method 1: Restore the default settings of the BIOS WARNING: this procedure may involve changing the semiconductor (CMOS) settings of the computer's complementary metal oxide and by changing the BIOS of the computer. Incorrect changes to the BIOS of your computer can result in serious problems. Change the CMOS settings of the computer at your own risk.

  To resolve this issue, restore the BIOS of the computer to its default settings. For more information about the correct settings of the BIOS of the computer and how to check and change these settings, see the computer documentation or contact the manufacturer of the computer.

  In addition, to confirm that the computer's BIOS is current, contact the computer manufacturer to inquire about the last update of the BIOS available for the computer.

  Back to top

  Method 2: Remove the faulty RAM to resolve this issue, remove the memory modules installed in the computer.

  NOTE: you must leave enough RAM for the computer to start and run Windows.

  For more information on the amount of RAM that is required to run Windows, click on the number below to view the article in the Microsoft Knowledge Base:

  304297 configuration (http://support.microsoft.com/kb/304297/) System requirements for Microsoft Windows 2000 operating systems

  If the error message described in the "Symptoms" section of this article appears again after removing the memory module, remove a different memory module. This procedure may ask you to restart your computer several times to identify the specific memory module that is not working properly.

  For more information about how to add and remove RAM to the computer, contact the manufacturer of your computer or see the documentation that came with your computer.

  http://support.Microsoft.com/kb/318729

  I hope this helps!
  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• MY laptop was stolen, all I have is a copy of its operating system on 3 cds, I have no record of the computer serial numbers. No number at all, can I use the operating system on an old pc?

  I don't have the product key, the operating system has been pre-installed, ASUS X54C series

  If windows 7 is pre-installed it is OEM and cannot be transferred to another computer

• Play the Spider Solitaire Vista using the keyboard

  Hi, I have recently acquired a new computer with windows vista. Also, my old computer has windows vista. I am a big fan of Spider :) solitaire However, I don't like that play SS with my keyboard... I hate using the mouse. On my old computer, I had no problem using only the keyboard. Now, with this new version of vista (?), I can only use the keyboard to show me the clues... Shortcut keys changed? or y at - it no hotkeys on this new version? Thanks for your help!

  Hello Darcrista.

  I don't think that Spider had functional changes between Windows Vista and Windows 7.  The arrow keys and enter still work here.

  Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

• Can I take the nano sim card in my iPhone and use it in my iPad

  Can I use the nano sim card in my iPhone in my mini iPad?

  As long as your account has data on it. Will not, however, be able to make phone calls with him.

• does "set up as new iphone" prevent later restore the data from the old iphone (iphone 4)

  refurb Iphone 4: if I use the option "set up as new iphone", I can retrieve later data from the old iphone from itunes? (macbook 10.6.8 don't dl latest version of itunes @ this time)

  You would be able to restore an old backup him later, but doing so will wipe everything that is currently on the phone. There is no way to combine.

• I can control my Apple music through the Apple Remote app on my iPhone and iPad?

  I can control my reading of Apple's music using the Apple Remote app on my iPhone and iPad?

  Yes, read this article on the basis of knowledge of Apple on how to do...

  12 iTunes for Mac: use the Remote app to control your iTunes library

• I had to do a full (out of the box) system restore. Before that, I did a complete backup of dvd by using Windows backup center and restore...

  Windows Vista 64-bit
  I had to do a full (out of the box) system restore. Before that, I did a complete backup of dvd by using Windows backup center and restore. I'm now trying to restore my files however, I get an error message that says the missing user account... "files that you are restoring have security permissions to a user account that is not found on this computer. The missing account is shown below... Dad-PC\ADMIN."the problem is, that a user account name cannot contain the"------"what to do? Thanks in advance!

  Hello

  at the end of my 1st response is a link to the appropriate forum for these questions

  If you have problems, it's in here is a forum for microsoft at the link specifically for backup questions below

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• After that I restored the backup Thunderbird using Mozilla Backup, any of my accounts table. I checked that they are in need of backup, lift the mail.

  I backed up my 24 Thunderbird using Mozilla Backup. I did what I had to change one of my accounts. After making the changes, I decided to restore the backup I took. Restore seems to work and I checked the profile is correct and e-mail accounts are in the mail folder. However, when I run Thunderbird, only the Local folder is displayed, any of my email accounts. I really need to get this working I have very important data in the email. Thanks for your help.

  Did you change the path where the mail files?

  And, you use local folders in the GUI of TB to store messages?
  Did not have that clearly in your post.

  According to what you actually did Re: evolution of the accounts, & if the backup has been restored in the way (profile) accounts (and the profiles.ini file) think they are in. if the profile is now in a different path, you will need to change the path in the file profiles.ini to reflect the correct path.

  Also, sometimes after restore or do other work, the *.msf files in e-mail files get damaged or simply confused. The .msf files are in the same folder as the Inbox, sent, etc.. They are the index files - not electronic mail storage files. (the mail storage files do not have extensions).

  Often, when the email that actually exist in the mail files does not show in the accounts, remove only files *.msf in each acct mail storage file will correct it. This is the easiest step to try, but again - it depends on actions leading to the question.

  They will be recreated when TB restarts & apparently can "fix" themselves, to redisplay stored messages. Unless something on current storage files is corrupted.

  http://KB.mozillazine.org/Disappearing_mail

• I used to be able to see all the cookies that had been installed, and now I can't.

  I am irritated beyond belief. Why should you change a good thing and make stupid?
  In the part of privacy options, I used to be able to see ALL the cookies that have been installed in a window, and I could choose those to whom I want to delete. I guess it was just too much control to give to us, if you had to remove this feature, right?
  I would go back to a previous version of Firefox. I'm sick and tired of your stupid updates that screw things for everyone.
  How can I revert to a previous version?

  • IF you use the parameter "Remember history" (as described in this article-> story to remember), click Delete the Cookies to view all cookies
  • IF you use the parameter "use custom settings for history" (as described in this article-> use the custom settings for history), click View the Cookies to view all cookies

  Check and tell if its working.