I used Microsoft Producer to synchronize audio and the slides in a presentation, power point, the question is to know how to put it in the form of a PowerPoint presentation file and burn a cd.

Similar Questions

• Why I get this error message: error while trying to synchronize audio and midi?

  I just updated Logic Pro and all of a sudden my lexicon alpha interface does not work correctly.  I get this error message: error while trying to synchronize audio and midi. Check for conflicts between Logic Pro and the external device. Help

  Start by making sure that the project in logic settings are set correctly - I think that the lexicon only supports 44.1 or 48.

  If it is software used to Setup place the lexicon make sure you that the sampling frequency is set to the same logic.

  Sometimes that power and the lexicon solves the problem...

  If none of the help above - make sure you use a multi-out or comprehensive audio device (OS X)

  

• Hi, I have an acer 7739G and I want to use the construction in camera, but I don't know how to put on... help please!

  Hi, I have an acer 7739G and I want to use the construction in camera, but I don't know how to put on... help please!

  Hello

  Search for information to Acer.

  http://support.Acer.com/us/en/default.aspx

  See you soon.

• help my screen is sideways and do not know how to put it back lol

  My son, I have on my pc and did something that every thing is now on the side and I don't know how to put it back please help

  Hello

  Right-click on an empty area of the desktop - graphics Options - Rotation

  CTRL + ALT + arrow key it also runs.

  CTRL + Alt + (up arrow), Ctrl + Alt + arrow (pointing down), Ctrl + Alt + arrow (left) and also Ctrl + Alt + arrow (right)

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• instead of the lower left corner and I don't know how to put it back on the bottom

  Somehow, my son moved my taskbar to the bottom of the screen of my laptop on the left side of the screen. My STARTUP icon is now in the upper left corner instead of the bottom left corner and I don't know how to put it back on the bottom. How do come back on the bottom where it goes?

  Right-click on thew start button | Properties | Tab taskbar | Location of the taskbar on the screen. Back at bottom.
   
   

• Microsoft movie maker play audio of the 3rd song

  Read some threads here, but not sure the results you obtained.

  I make a dvd with only 147 photos picture. I can get audio on the front, I get 2 songs to play and can not get the 3rd song to play. Have checked and unchecked the button to synchronize data.

  Preview is fine when checked the 4 songs play but when I burn only 3 - HELP or I give up and leave the last unaudioed of 2 minutes for mental health reasons! . PS have tried all sorts of songs

  First of all, make sure that all your songs are one of the following formats:
  MP3, wav and wma. It doesn't matter what items you have read. Stick to these 3 formats.

  Inserts your 4 songs as you wish. Read the overview. If it plays in Movie Maker, he plays in DVD creation.
  If any problem, then publish > DVD. I guess you know the rest of burn DVD procedures.

  t-4-2

• my screen on my home page is real big and I don't know how to put it back to regular size

  I need help to put my homepage down to regular size

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not fix it:

  Go to the Web site of the manufacturer of your laptop computer-graphics/computer card > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  Then:

  http://Windows.Microsoft.com/en-AU/Windows-Vista/change-screen-resolution

  Change the screen resolution

  Screen resolution refers to the clarity of the text and images on your screen. At higher resolutions, items appear sharper. They appear also smaller, so more items adapted to the screen. At lower resolutions, fewer items adapted to the screen, but they are larger and easier to see. At very low resolutions, however, images may have serrated edges.

  See you soon.

  Mick Murphy - Microsoft partner

• bought a new Imac 21 and want to know how to put in place and transfer files from old imac

  I just bought an imac 21 "new operating system El Capitan. I would like to plug in and start but would like to migrate some files from my old imac under Snow Leopard 10.6.8. I'm new to this procedure and would like to help to do this. I watched a few videos, but not sure what to do on the withdrawal of some things from the old imac before you start. Delete files from the finder, I'm not sure about the emails, contacts and all that sort of thing. Could someone suggest a good tutorial to help me.

  Thank you

  Get an external drive, you can connect to your old computer via the USB port. Clone the old disk on the external drive:

  Clone using disk utility Restore Option

  1. open utility disk from the Applications\utilitaires folder.

  2. Select the destination volume in the list on the left.

  3. click on the tab restore in the main window of THE.

  4. Select the destination volume in the left list and then drag

  him the Destination entry field.

  5. Select the volume of the source of the list on the left and drag it to

  the Source field.

  6. check understood you, and then click Restore.

  Destination means that the external backup drive. Source means that the boot disk internal.

  You now have a backup of the old computer. Move the external drive to a USB port on the computer where you are restoring files at your leisure, manually. If you want to migrate your account to full user (folder), etc., then you can use the Migration Wizard to migrate the data from the external hard drive.

  How to use the Migration Assistant to transfer files from another Mac

  Migrating data from an other Mac OS X Manually

  How to use the Migration Assistant to transfer files from another Mac

  
  

• the former admin account controlling many files how to remove this unknown account I have only one account and can not delete or move files.

  Impossible to delete or move some files because of the property with Administrator removed after upgrade to vista
  I tried to upgrade to Windows 7 & and pc crashed couldn't reload so went for new install this left an unknown error account.

  Hi all

  I was having the same problems and this message is used to solve this problem

  (1) the correct syntax for the activation of the Administrator's

  NET user administrator / Active: Yes

  Notice, there is no space after the slash

  (2) that works, I logged as administrator.

  I could just go in the folder, click on security, to change users, to remove the

  (3) now, I did run in which inherit permissions errors, here's what I did to get around that
  In the Security tab, select ADVANCED security features, find the user to EDIT the PERMISSIONS
  Highlight all users, EDIT, all DENY options to checked, will APPLY, you receive a warning about using the DENY option, just OK, OK OK, return to the Security tab.   NOW, come on in, user of the IDE and you should be able to remove this

  (4) another thing, make sure that the is not owner on any of the folders.  I've changed them all to someone else, but be careful, that could spoil you

  Hope this helps

  Happy holidays from cold, wet PHX, who would have thunk it!

  Lost_N_Arizona

• Key broke and I don't know how to put back on!

  I noticed that my left key was difficult press then I cracked it to other computers can snap them on.
  I pulled out the dirt, but the key will not go back. What should I do?

  Hello

  It is a bit complicated and I don't know how to describe it, it is possible to...
  It is not only to press its place again, you need to move a little at the top

  More delicate are the keys to the big (I needed half an hour to do with the BACKSPACE key)
  They have a certain fragile mechanics on the negative side, you have to explore to find
  a way to put them back on the keyboard.

  When I have crumbs under the keys now, I first try blow them with a blade of straw.

  Good luck!

• Can I use ACR to open the former Canon's RAW .tif files?

  I have been using my trusty Canon EOS 5 d with the. CR2 extension without any problem, but recently got a GREAT buy on a 1Ds used but mint condition.  These older cameras use a raw with the extension .tif file, I use a card reader to put them on my Mac.  Usually with the CR2 file it automatically opens them in ACR.  This will be the same with a file with a .tif extension?

  I know I could probably use a Canon software that comes with the camera, but I've always found ACR to be better.

  Thank you!

  Michael

  Yes, ACR reads most of the RAW (pass the path, the path of the return) files.

  Controls of the cab. TIF files to see if they are FIRST and opens them in ACR instead of using the normal TIFF code path.

• Why used to traction to scan documents from the form loader?

  I have a brother multi function printer/scanner.  I try to scan several documents and can not get the scanner to remove the documents from the charger of the form.  Instead, he wants to scan from the tray.  Any suggestions?

  Hello

  May I have the Acrobat version and OS you are working?

  Please, try the following:

  Open Acrobat.

  Go to file > create > PDF from Scanner > Custom Scan...

  In the custom scan dialog, select TWAIN drivers

  Click on the 'Options' button next to him

  Select the User Interface as Show the Scanner's Native Interface

  Click Ok & Scan

  This will bring the native interface of the Scanner window and select document as a source feeder.

  Thank you

  Abhishek

• Error trying to synchronize Audio and MIDI...

  43 087 recognition of the sample rate.

  Check for conflicts between Logic Pro X and the external device.

  I have a MacBook Pro from early 2011
  Quad Core 2.2 GHz with 8 GB of RAM

  I have a fairly new 2i2 Focusrite Scarlett, which I was happy to discover is class compliant should so no driver.

  Everything was fine until the last update of logic.

  Now, I get the above error sometimes after only a few seconds of reading.

  I get a similar error message in GarageBand.

  I checked the rate of sampling in the logic is the same as that defined in the Audio MIDI Setup.

  I sent Focusrite who suggested the rampage preferably several files which made no difference.

  Then they suggested re-installing logic that will be my next move unless anyone has any other ideas?

  And OS (OSX) as well updated, or only the logic?  If the operating system has changed to a degree, you also look at this. In the past, there were several problems between logic and the operating system that sometimes requires an update of the operating system to fix the problem.

  That said... Make sure that you have removed these two files, but first, shut down the computer and unplug the Focusrite.

  Restart the computer.

  Then:

  In the Finder, choose go > go to folder from the menu.

  Type ~/Library/Preferences in the field 'go to folder '. (Note: type exactly)---> ~/Library/Preferences

  Press the Go button.

  Delete the file com.apple.logic10.plist from the Preferences folder. Note that if you set custom shortcuts, it will reset to the default values. You can export your custom key as a preset before performing this step. See the user manual Pro Logic for more details on how to do it. If you are having problems with a with Logic Pro control surface.

  then delete the file com.apple.logic.pro.cs from the Preferences folder. Note: be sure and delete the two files.

  If you do not use any custom key commands do not worry on this part, preferably the files will be rebuilt next logical start.

  Then, restart the computer (there is a reason for that) leaves settle, plug the Focusrite, wait a minute, logical to start and go to preferences audio logic, adjust the peripheral input and output on the Focusrite, set the buffer to 256 I/o.   Go into settings of synchronization/MIDI tab and disable all sync to MIDI clock .

  You can disable the automatic update to OSX system preferences, under ideal conditions, the operating system does not have to be updated with a USB or Firewire device connected.

• Using Microsoft SQL Server SP2 2012 and update KB2793634

  I'm in control of several servers that are running Microsoft SQL Server SP1 2012. One of these servers is broken to cause the same symptoms as KB2793634 ( http://www.microsoft.com/en-us/download/details.aspx?id=36215 ) fixes. This error is due to the installation of SP1 (which has been done on all servers) and will come into action later. I'm afraid that the other servers will be in shortly.

  Prior to this fix, I applied 2012 SP2 of Microsoft SQL Server on the server with the issue in the hope of resolving this. KB2793634 is now unable to run on this server because it is compatible with the SQL SP1. So my question is:

  SP2 includes KB2793634? I want this problem to be addressed before the other servers are affected as this first, then should I install SP2 or just install KB2793634 on other servers?

  Thank you very much, I hope that all the senses. If it's in the wrong place, can you please direct me to where I can ask SQL related questions?

  Ask the question in the SQL Server forums:
  http://social.msdn.Microsoft.com/forums/SQLServer/en-us/home?category=SQLServer

• Is it possible to synchronize audio and video with H.264 output?

  Get them this output module. Any ideas? How can we overcome this? I import png and audio/video directly from a DSLR camera in .mov format.

  Thank you

  
  Adam

  Thank you come back to me, it seems that H.264 does not accept less than 23.976 frame rate, I went from 20 to 25 and problem solved.