Is it possible to synchronize audio and video with H.264 output?

Similar Questions

• SYNCHRONIZATION PROBLEM TRYING TO RECORD AUDIO AND VIDEO WITH THE LIFECAM VX-3000

  I use Windows 7 and have 2 GB of RAM, but when I record on my hard drive with the LIFECAM VX-3000 reading is slightly, but apparently out of sync.  Does anyone know why?

  Thank you

  Tony Cash

  Hi Anthony,.

  Although that do not know what could be the cause, here are a few things you can try.

  1 see if turning off the background tension or lowlights helps solve the problem of synchronization. See the webcam of the help manual.

  2. lower the screen resolution. Reference: change your screen resolution

  3. install the latest version of the software of the webcam.

  You can get the software here:http://www.microsoft.com/hardware/download/DownloadResult.aspx?category=ICE&type=LifeCam&name=68A-00001&os=Win7_3264&lang=en

   

  For more information, see:

   

  http://www.Microsoft.com/hardware/digitalcommunication/LifeCam/Readme/en-us/default.mspx

  4. make sure that you have installed the latest drivers for your video card and sound card. See the documentation for your hardware manufacturer or a web site for more information on how to update the video card and sound card drivers.

  For updates of the driver, see this link:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• audio and video synchronization on a file in the library media player Windows 7 Home Premium 64-bit

  How can I synchronize audio and video on a file in the library media player Windows 7 Home Premium 64-bit
  video play about a second faster than the audio, the download is good, cause it works on another computer on a flash drive...
  

  How can I synchronize audio and video on a file in the library media player Windows 7 Home Premium 64-bit
  video play about a second faster than the audio, the download is good, cause it works on another computer on a flash drive...
  

  Set up a device to sync in Windows Media Player

  Sync manually in Windows Media Player

  Windows Media Player sync: frequently asked questions

• Audio and video synchronization minus 1 frame?

  Hey everybody,

  I have a problem, I don't perform to synchronize audio and video. There is a difference between the voice and video on less 1 frame. How to synchronize the least 1 frame?

  Thx for your back,

  Clément

  Select 'Audio-units of time' in your timeline. It contains the definition is located in one of the boxes of your timeline - depends on what version or PrPro you use.

• Play audio and video in a player?

  Hello

  Is it possible to play audio and video is the same player?

  If I give the video url video will play and even sound?

  I think you can do a work arround as follows-

  In both cases, you create the plyaer in same way-

  A player = Manager.createPlayer (urlToPla);
  Player.Realize ();

  But in the case of video, we get the VideoControl and get the associated display field.

  VideoControl videoControl is player.getControl("VideoControl") (alarm);.
  Field videoField = (videoControl.initDisplayMode) (field)
  VideoControl.USE_GUI_PRIMITIVE,
  "net.rim.device.api.ui.Field");

  and then we add this field to the display Manager.

  Then first check to see if you get the field correctly prior to adding(as in case of audio this may be null)-

  If (videoField! = null) {}

  Add (videoField);

  }

  I have not tried, but give it a try, it may be useful.

• You can embed audio and video in a captivate file?

  I was wondering if it is possible to incorporate audio and video into a captivate slideshow files somehow so that no sidecar files are needed?

  or do I always have to keep separate files mp3 and flv related the long side of the captivate file?

  Thank you!

  Hello

  It's a pleasure. Thanks to the development of the issue.

  You don't have to get the audio files or viseo everywhere. Once you have inserted the files in Captivate, you need only to take the rest of the file .cptx files will remain in the project.

  I hope this helps!

  Thank you!

• Fusion audio and video, all clips / takes both

  Hello

  I am looking for a possibility to synchronize all my video clips with audio recorded external at the same time. Audio of a video have the same TC to synchronize.

  Selection of all media, the merge clips option is grayed out. Select a video and audio file, which works fine, but I don't like to do it manually for each clip.

  I just got the trail from the eyes of the plural, but here it does not work.

  Thank you

  Johannes

  I found a nearly quick workaround that works if audio and video have the same TC:

  1. Select all audio and video clips

  2. choose Create sequence multicam

  -> which puts each correspondent audio and video in a clean sequence

  3. Select all the new sequences a sequence open right click in the timeline.

  4 drag and drop the audio and video of the timeline in a tray

  -> which creates the merged clips

  5 remove all sequences of blocking

  It takes about 5 s by video footage and a bit of media management.

  But this should not be a big deal to implement this feature in first. So lets make a feature request!

• Binder/sync Audio and video

  I think I'm right on the right edge if this can work:

  I have a rough cut of a few clips using audio on the device. I also recorded with a separate audio recorder. I want to sort a secondary audio link to the primary audio and video clips from the source, so that the secondary audio will be added for the first mounting without having me to go and re - synchronize each change with the corresponding secondary audio. Is it possible to sync the audio added in a source file and have a reflection in an edited sequence?

  Aligning each camera with audio clip associated with its own sequence, then changing using these sequences rather than the original clips is one of the best ways to proceed in the light of your starting point.

  Audio drift should not be apparent on reasonable periods of clip (for example, up to 10 or 20 minutes) depending on the stability of the clock in the audio device.  Many reports were due some manufacturers using audio rates slightly non-standard who first then supposed to be correct and therefore generated out-of-sync issues for about 30 minutes or more.  Not your problem here.

  If, when you check the sync audio on a full clip, you know it's OK at first but in the end, then setting a marker for both video and audio at the end and using the rate stretch on the audio to change its length by a small amount to align the markers should give good enough sync for the clip.

• PE3 is possible to synchronize two sources video post edit AB Roll?

  In PE3, is it possible to synchronize two digital video files (AVI) to create an AB roller type post edit.  My two captured video files seem to have different speeds or od frame.  How do I align and frame corresponds to 2 video sources?  The situation is a 2 photo shoot.  How to best create a roll of AB edict of sources 2 videos with audio of a video file as a common element?

  Wes,

  Armed with Steve's article, you should be able to do what you want.

  I have a question and maybe a suggestion to fix the problem of pace from the start, to help solve this problem without a lot of fiddeling. What are the two frame rates? G-Spot will tell you exactly, if you can't find it in the properties. If the source files are DV - AVI, they must be of the exact same rate initially, but if you're a little off, I would like to convert it the DVD specifications do not support a correspondent. First place I would try this would be to simply interpret footage in the project Panel. If this does not work, then Windows Movie Maker can do for you, or you can use other conversion tools to match. I use DigitalMedia converter, but it's not freeware. Get the two sources in perfect sync at the beginning will go very far to the success.

  Good luck

  Hunt

  [Warning] I don't have PE3, PE4 only, but I think that applies to your version.

  [Edit] After reading the article by Steve, the only thing I would do (after the sync property) to help me in the multi-cam editing would be to set the video track display to show all the "frames" and the expansion of the height of each video track two (VT), so that they occupy the largest part of the vertical real estate in the timeline. Then, I would zoom in on the horizontal of the timeline display, so that I could see quite clearly, each image. Basically, this makes the timeline as a line of detailed scene, but you can stay in Timeline Mode. Because you do not have Mode multicamera PrPro, you won't get anything your video footage track higher in the program monitor. You will be viewing the images on the Timeline. This will require a lot of horizontal scrolling on the Timeline, but it is doable. Then, when you want to use the images of VT1, you will cut (scissors tool) VT2 overlay images. Personally, I work out my main sequence (such as the master in the article Steve Audio track) on VT1 and images from my camera "cutaway" on the VT2 console. Like prescedence VT1, VT2 you can leave VT1 footage almost alone and just cut the images on VT2. I would use the Cross-dissolves on the head and the tail of the "Cup" Clips to VT2. Remember that if you use these, you want to make sure that the cutting came where you want the scene on VT2 absolutely start or end. The duration of the cross-dissolves will determine when the stage becomes either visible at 100% (head), 100% invisible (tail). Also, don't forget that Dip - to-black on VT2 takes the image on VT1 to black, where my use of Cross-dissolves.

  Using this method, can also do some repositioning of the (cut from the original) Clips to VT2, to offset any loss of synchronization. But you can possibly use it to set the framerate differences, I'll try again to get the images as accurate, as it is possible to start - a lot less work in this way. Also, once the 'holes' were cut into the images on VT2, you can start using the program monitor much more.

  As Steve points out, PrPro facilitates locking securities and a double multiple camera monitor, multicamera mode.

  This is exactly how we did with film, except that we had to splice in black leader, where cuts were made and could not hold our intact VT1 sequences, we can with an NLE and video. Because we were dealing with sprocket holes, we had doped (sprocket) gears on a 'sync' block, and once we'd get right alignment, would physically renversible by a guide, who would 'lock' the film to these two rolls of film for the sync block. Although it may seem difficult, when you read it, it's really not and so very easy, as it was with the film.

• Satellite A80: How to restore the audio and video codecs?

  How to restore the audio and video codecs that are installed by default on my Satellite A80 with XP Home edition?
  I removed the safe mode, due to a problem with the Pinnacle Codec installed by Pinnacle Studio 10.
  Now, I need to put the video standard in audio codecs.
  I already downloaded the Microsoft Mediaplayer codec package and video sound new fr in Media Player.
  Unfortunately I have always its program to diagnose Toshiba during the test of its Midi and Wave.
  System Restore came with the message that the restoration was not possible because no changes had been made.

  Post edited by: roel

  Hello

  Try to use the tool "system restore."
  This application restores the operating system to the beginning.
  Maybe it will work.

• How to make a streaming audio and video on BlackBerry.

  Hi all

  Please someone help me.

  I must be a 3rd part java application that can stream audio and video server and can play only audio/video on my phone from BB.

  Please share me your ideas or related links to do the same as soon as POSSIBLE.

  Thanks in advance.

  Thanks Peter.

  It's really useful links

• Audio and video out of sync after rendering

  Hey!

  I already asked a fairly identical question like this, but I have some news:

  First of all, my problem is that after the export of the audio and video is not synchronized as in the scenario. Well, many have told me that he deals with variable frame rates, because I have images is 25 frames per second and sequences with 29.97 fps. But normally first would have changed directly each element in my sequence (25 fps, 1920x1080p) settings. And later when I add the clip in MediaInfo, he also tells me that the frame rate is 25 fps constant, not Variable. So I think that this is not yet the problem more.

  But now, here's a little 'story': when I open the video after the return of his perfectly synchronized WITH the VLC Media Player (and not Windows Media Player).

  And my question is: how is this possible? Couldn't, I now just change the Standart to VLC Player and then upload it to Youtube with the normal sync? What is the difference between windows media and VLC media player in this case player? Maybe it's because I have a few Quicktime footage in my sequence, which can be read with VLC Media player and not with windows media player?

  If you have any ideas, let me know!

  Thank you

  You basically answered your own question. VLC has proved to be more versatile and superior then the WMP.

• Audio and video of the iPhone, do not sync in Premiere Pro

  Good afternoon! I'm having a problem with the synchronization of audio and video when I change the first adobe, recorded two videos for my iphone 6s and edited first by using sound effects, png and JPEG images and includes texts by the Prime Minister himself, but half of the video with impatience I lose audio sync with video I thought I had done something wrong, has remade the editing and even once, there was this error how can I solve this problem? Recognizing!

  
  

  Title edited by Kevin Monahan
  

  Hello

  The 6s iPhone uses the camera application which does not reliably draw a constant cadence, he shoots at a variable rate. You can buy apps that take on a constant pace, however.

  To fix your issue, you need to transcode into something like the hand brake. Then import it back to Premiere Pro. Next time use a better application.

  See you soon,.
  Kevin

• Fusion audio and video clip

  Will be the first evidence of fusion audio and video clips so that I can then change them as a clip?

  richardb

  So that we keep in sync, I just wanted to clarify something... it is, your question is not out of sync audio before or after export. Ask not how to synchronize audio in Premiere Elements. Using the tools of Premiere Elements, you have been able to successfully replace the sound of the iPad with another audio source and synchronize the new audio source to component video without much trouble with Premiere Elements. I think that is correct based on what you wrote

  I found that I can synchronize the two audios and then delete one of the iPad and then link other audio and video. It seems that I can then edit the video and keep the linked video and audio.

  What did you use as your tools of Premiere Elements for the audio synchronization - Alt and arrow key (left or right) faucet to shift the audio 1 frame left or right or the SHIFT + ALT and arrow (left or right) tap to push 5 audio images left or right? These are details of Windows... for your Mac, did you use Option Alt and shift + Option for Shift + Alt? I'm strictly a Windows of the elements user.

  I hope that your future posts will clarify the following to make sure that we are clear about what your goals and make sure you have the information you need to work on your project.

  Is there a reason why you couldn't do all in a project and an export - create your Timeline with iPad video and audio special for it but also make additions to the project timeline prior to export of this timeline to a final product of Premiere Elements?

  If everything goes well and there is no problem that you have not mentioned, I would try to avoid re-encoding involved in the export and import of export in another project where the only issue is another exporting.

  Please consider.

  Looking forward to hear your progress as your schedule allows.

  RTA

• Unlink the Audio and video in gray in the first 13 items (Windows 8.1) [new user]

  I posted (or at least I thought the post worked) this Mar.27th question, but I can not find it or that the answers I have gotten so if anyone knows his comings and goings, I would appreciate you tell me how to see while I have 2 threads running for the same question. My question is: why is the ability to separate audio and video tracks greyed when I am trying to replace the part of an audio clip (without ruining the synchronization between audio and video existing). I work with a saved file "projectX.prel". I noticed when I opened a new project that the option to break the LINK is active. This seems contrary logic is to say action to break the link would be more likely to be needed when you are working on an existing file as opposed to when you are working on a new file? How can we separate the 2 components (audio & video) so I can just edit the audio clip without the work of procedure to break the LINK? Would appreciate any help anyone can offer with the foregoing. Thank you.

  garryw

  First broadcast 13 elements 8.1 on windows 64-bit. Have you updated to the 13 to 13.1 yet? If this isn't the case, please do so using Help Menu/updates to date of an open project.

  But for the immediate question...

  I don't see any sign of a previous post you so I'm not sure what happened to your prior shipment.

  When you import a file that contains the video and audio, they come into Premiere Elements project related - party video presenting the

  Video of track 1 and the audio portion on the Audio 1 track.

  If you want to unlink the audio of the video

  a. Select/highlight the chronology of the record and go to video Menu/unlink Audio and video and click it. It does not work.

  or

  b. right click on the file of chronology, and in the drop-down menu, find and click on remove the Audio and video link.

  or

  c. hold down the ALT of the main keyboard to the computer and click drag the audio from the video.

  Please consult the bulletin and review, and then let us know the result.

  If any questions or need any clarification, do not hesitate to ask.

  Thank you.

  RTA