I used up to the allocation for the region 1 & 2 DVD for help. stuck on region 1 now. I need to use the two regions for my DVD. Help, please. Beryl

Similar Questions

• Get the DLL string (memory allocated for DLL)

  Hi, I'm aware there are a lot of discussions around this topic, but there are a lot of variations and I've never used before LabVIEW, and I seem to have a hard time at a very basic level, so I hope someone can help me with the below simple specific test case to put me on the right track before I pull my hair remaining.

  I've created a DLL with a single function "GenerateGreeting". When it is called, it allocates enough memory for the string "Hello World!" \0"at the pGreeting of pointer, copy this string to the pointer and sets the GreetingLength parameter to the number of allocated bytes (in the DLL in the end, I want to use, there is a DLL function to free the memory allocated for this way).

  I created a header file to go with the DLL containing the following line.

  extern __declspec(dllimport) int __stdcall GenerateGreeting(char* &pGreeting, int &GreetingLength);
  

  I then imported the LabVIEW file using the import Shared Library Wizard. That created a "generate Greeting.vi' and everything seems somewhat sensitive for me (although this does not mean a lot right now). When I run the vi, the ' GreetingLength on ' display correctly '13', the length of the string, but "pGreeting out" shows only three or four characters (which vary in each race), place of the string that is expected of junk.

  The pGreeting parameter is set to the 'String' type, the string "String pointer C" format, size currently Minimum of 4095. I think the problem is that the DLL wants to allocate memory for pGreeting; the caller is supposed to pass a unallocated pointer and let the DLL allocates memory for the string the right amount, but LabVIEW expected the DLL to write in its buffer préallouée. How to with LabVIEW? Most of the functions in the DLL in the end, I want to use work this way, so I hope that's possible. Or I have to rewrite all my DLL functions to use buffers allocated by the appellant?

  The vi , header and the DLL are atteched, tips appreciated. Edit - cannot attach the dll or the headers.

  tony_si wrote:

  extern __declspec(dllimport) int __stdcall GenerateGreeting(char* &pGreeting, int &GreetingLength);
  

  Although char * & pGreeting is actually a thing of C++ (no C compiler I know would accept it) and this basically means that the char pointer is passed as a reference. So, technically, it's a double referenced pointer, however nothing in C++ Specifies that reference parameters should be implemented as a pointer at the hardware level. So free to decide to use some other possible MECHANISM that takes the target CPU architecture support a C compiler constructor. However, for the C++ compilers, I know it's really just syntactic sugar and is implemented internally as a pointer.

  LabVIEW has no type of data that allows to configure this directly. You will have to configure it as a whole size pointer passed as a pointer value and then use a call MoveBlock() or the support VI GetValuePtr() to copy the data on the pointer in a string of LabVIEW.

  AND: You need to know how the DLL allocates the pointer so that you can deallocate it correctly after each call to this function. Otherwise you probably create a leak memory, since you say that the first 4 bytes in the returned buffer always change, this feature seems to assign to each run of a new buffer that you want to deallocate correctly. Unless the DLL uses a Windows such as HeapAlloc() API function for this, it should also export a function according to deallocate the buffer. Functions like malloc() and free() from the C runtime cannot always be applied in the same version between the caller and callee, so that calling free() by calling on a buffer that has been allocated with malloc() in the DLL may not work on the same segment of memory and result in undefined behavior.

• You will need to download the quicktime plugin to use the Blackboard for the school site. can not find the plug-in but downloaded real quick time. help please, thank you!

  Hello

  I need to download the quicktime plug-in to use certain features on the site, Blackboard, for school. Plugin cannot be found and I downloaded quicktime. Help, please.

  Thank you

  Kirsten

  The QuickTime plugin is part of the QuickTime multimedia player.

  See:

  • https://support.Mozilla.org/KB/using+the+QuickTime+plugin+with+Firefox

• I got an iphone 4 to a friend in the Canada. I want to use it here in the Philippines as a regular iPad reserved for wifi, how can I use it without sim card? It does not pass the activation page. Help please?

  I got an iphone 4 to a friend in the Canada. I want to use it here in the Philippines as a regular iPad reserved for wifi, how can I use it without sim card? It does not pass the activation page. Help please?

  You can activate it without a SIM card. If it is locked, it takes a SIM card by the carrier, for it is locked. The SIM card should not be linked to an active line of service, but it must be present to activate it.

• Satellite A660-k17: can I remove the two primary partitions used for restoration?

  Hello
  I have 3 questions :) #.

  1. I burned a copy dvd recovery media, on a laptop A660 k17. There are two partitions on the disk that I think are there for the recovery. The first is 1.46 GB and it's for the recovery and another partition hidden 8.29 GB... and I think that the first contains the Recovery Wizard and the whole environment in which we will get through the repair of the system and the hidden disk contains the actuall with windows data, drivers and so on. Can I remove these two? I ask mainly on the first, if it is not necessary for the system to boot or something after that I have to recover the laptop to the factory setting.

  2 and I also want to leave my partitions so that I don't have to partition the whole drive from C 600 GB again. I have a D drive created but there is this response to a topic already in the forum http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=64754&tstart=90
  who says that when I leave the partitions I created myself, that the recovery will be not available. I have a copy on dvd, but only to make sure no kidding something upward.

  3. when I want a clean system without some software which are preloaded on the oem recovery disk... I have to use windows recovery? or it will be the same as the toshiba one?
  Thanks for the reply possible :)
  Beautiful day :)

  > Can I remove the two primary partitions used for restoration?
  First not, but you can remove the Toshiba recovery partition if you created the recovery DVDs. One day, if you want to install the recovery image once again you can use created the recovery disc.

• I use Photos to make a schedule, and when I add national holidays and have a personal calendar already selected for the import, national holidays replace a personal date when the two entries in conflict.  Any suggestions?

  I use Photos to make a schedule, and when I import two calendars of Mac, I can't play well together.  By example, if I add the national holiday calendar to a personal calendar already selected for the import, national holidays replacement a date personal when the two entries in conflict.  Users are allowed to several elements to show on a given date (I can add an article manually; and if I have two elements in a personal calendar, they both matter very well).  Does not seem serious if I import successively or simultaneously, the holidays always seem to prevail on personal items.  I am proud of my country, but want to avoid adding those who back in manually (and avoid having to check everything so closely).

  Any suggestions?  Thank you

  John

  (running Yosemite on a mini 2015)

  

  There is no way to have both separate schedules added and share a date.  Tell Apple what missing features you want restored or new features added in Photos via https://www.apple.com/feedback/photos.html.

  You could create a new calendar with personal anniversaries and holidays.  I think that would be the case with the exception of those holidays that might change the date to when if fell, which is Memorial Day for one.

  

• the use of two meters: one for the generation of regenerable impulses, one as a counter

  I'm new on use the counters. I use an NI PCI-6110 multifunction data acquisition card. I want to count a digital input (on the connector of the PFI 2) pulse and also using the entrance to trigger another counter to generate impulses. So I configured the first counter (task 1) to generate digital pulses with PFI2 as a source of relaxation and redeclenchables award; and set up the other counter (task 2) to count the number of edges of the digital signal with.... But after the two tasks began, the first task was an error 50103 (or the possible reasons: NI Platform Services: the specified resource is reserved.) The operation could not be performed as indicated.) The block diagram is attached. Thank you.

  Your Board uses very-old-in-electronic-standards-DAQ - STC a smart meter that requires a little secretly * two * counters work together to make a finite pulse train.  He is not actually secret if you read the right parts to the right documentation, but it's not hard to miss if you are unsure you should look.  It has been a while since I've done a lot with these counters, but I have this nagging thought that they may not support redeclenchables finishes pulse train generation at all.  I would caution you to at least check this.

  In any case, it is the reason for the error.  The finite impulse generation task uses only the counter that you specify, but there was also this one to help.  A couple of new generations of smart meter (NOR-TIO, DAQ-STC2) continues to have this limitation, but the * more * recent it is no longer made.

  X series boards use the chip "NOR-STC3" that give you 4 programmable counters by the user instead of 2 * AND * everyone can generate pulse trains finish without using a help desk.  You may want a pair of them upward with your 6110, assuming that you need simultaneous sampling analog 6110's capabilities.

  -Kevin P

• Pavilion DV2700: HP Pavilion DV2700 - how to reduce the amout of memory live allocated for video card

  Hello

  Is there a way to reduce the amout of RAM allocated for video card? I don't play games so only 16-32 MB should be more than enough

  I have 4 GB of RAM and only 2.99 are available. I know that 6 GB for a 32 bit OS only 3, 4-3, are available.

  Thank you

  Adrian

  It is actually more like 3 - 3.5 GB so 2.99 is just where you expect to be with a 32 bit OS. There is no way to manually set the memory allocation.

• "Error: the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.

  I have QQ (an international chat program) installed on the laptop. Then my hard drive crashed. Now when I try to reinstall it on my new hard drive I get the following message:

  "Error: the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for details" -how can I solve this problem? I have Windows 7.

  Hello

  Thanks for choosing Microsoft Community to post your question.

  It seems that you can not install application QQ, you get an error: "the application could not start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.

  We're here to help and guide you in the right direction. This problem could be caused when the computer is missing the correct C++ run time for your type of system components. (x 86 or x 64).

  Here are a few troubleshooting steps that you can try to solve this problem.

  Method 1: we will install Microsoft Visual C++ for your computer package.

  Note: If you use the 32-bit operating system, download and install 32-bit edition(X86).

  If you use the 64-bit operating system, download and install edition(X64) 64-bit.

  Microsoft Visual C++ 2008 SP1 Redistributable Package (x 86)
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=A5C84275-3B97-4AB7-A40D-3802B2AF5FC2&displaylang=en

  Microsoft Visual C++ 2008 SP1 Redistributable Package (x 64)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=BA9257CA-337F-4B40-8C14-157CFDFFEE4E&displaylang=en

  Package redistributable Microsoft Visual C++ 2010 (x 86)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=a7b7a05e-6de6-4D3A-A423-37bf0912db84

  Package redistributable Microsoft Visual C++ 2010 (x 64)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=bd512d9e-43c8-4655-81bf-9350143d5867

  Method 2: Run the fixit available at the following link.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Also, check the event log using Event Viewer.

  Please see the link below for more information on how to use Event Viewer to check the error message or information,

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  If you have additional problems, please reply to this post and we will be happy to help you further.

• WINDOWS 7 error the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.

  «WINDOWS 7 error the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.»

  This cams almost for all the applications that I try to open. I read all kinds of things to solve problems, but I can't install anything because it is constantly on the screen.

  I think it's like that because my computer shuts off when I was doing the system restore, because he has not started.

  I don't know what to do.

  Hello

   
  You can view the event log by using Event Viewer. See the link below for more information about how to use Event Viewer to check the error message or information,
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer
   
  Please check the information in Event Viewer and let us know the problem more briefly for a better solution.
   
  
  Method 1:
  However, try the SFC (System File Checker) scan on the computer. Check out the following link to do the same thing:
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833
   
  Method 2:
  You try to run the fixit given in the following link and check if it works:
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

   

  Method 3:

  You have recently updated with Microsoft Visual C++?

  http://social.technet.Microsoft.com/forums/en/itprovistaact/thread/5491a46a-57f4-444D-a1fd-2600fa6d587e

  I hope this helps!

• I deleted the creative cloud of the trial and the DM Dream weaver of the trial, after only using it for about 6 days, I tried to re-download the two tests and nothing happens. Anyone know how I can get this done. Please advise, your help will be greatly a

  Hello

  I deleted the creative cloud of the trial and the DM Dream weaver of the trial, after only using it for about 6 days, I tried to re-download the two tests and nothing happens. Anyone know how I can get this done. Please advise, your help will be greatly appreciated.

  Hello

  Also see also software Adobe to trial has expired at the beginning

  Hope that helps!

  Kind regards

  Sheena

• Hi I have a current plan of photography for £8.87 per month which is paid and up-to-date, it allows me to use PSCC and LR. I've updated the two about a week ago and now LR is ok but PS says it's now a trial and I want to buy it and my trial runs out soon?

  Hi I have a current plan of photography for £8.87 per month which is paid and up-to-date, it allows me to use PSCC and LR. I've updated the two about a week ago and now LR is ok but PS says it's now a trial and I want to buy it and my trial runs out soon? How can I get to the scene, I was up front with the full version of PS?

  Hello

  Please follow the steps below.

  Solution 1: -.

  1 sign out and sign back for creative cloud.

  https://helpx.Adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

  Solution 2: -.

  Check the "hosts" adobe entered into file. (If you don't see all the entries of adobe, go to solution 3)

  1. go to the location of the file "Hosts".

  WIN: C:\Windows\System32\drivers\etc

  MAC: Go to the menu finder on top > go to files > type '/ etc', press return.

  2. move the file hosts on the desktop.

  3. open.

  WIN: Open it with Notepad.

  MAC: double click on it.

  4 remove all entries of adobe, that it does not obstruct your machine to connect to the Adobe's Activation Server.

  5. rear move "/ etc" folder.

  Solution 3: -.

  1. check if you are using any kind of firewall (network/system) / proxy.

  2. turn off firewall / proxy.

  I hope this helps.

  Kind regards

  Vivet

• Necessary payment we're sorry, the billing on file information may not be used for this payment. Please update your information

  The warning "necessary payment we're sorry, the billing to the folder information could not be used for this payment." Please update your information' but if I click on update, it shows "we are currently processing your order. Please try again later. If it continues to fail, please contact Customer Support. ». We paid for a year of license there is this half of the year. Now all our licenses have expired on CC customer, we cannot use CC to work on the project for 2 days! Number of cases: 0215980350

  Hi there, please try to disconnect from the creative cloud and reconnect.

  You can check: https://helpx.adobe.com/manage-account-membership/cc-reverts-to-trial.html

• Im running ADOBE CC 2015 on an iMac and Illustrator plant all the time when I try to use the save for web. I need to use this feature, all day and am frustrated of all accidents. Help, please.

  Im running ADOBE CC 2015 on an iMac and Illustrator plant all the time when I try to use the save for web. I need to use this feature, all day and am frustrated of all accidents. Help, please.

  Hello

  We have published a 19.0.1 hotfix that resolves this problem in discussion on this topic. Please apply the patch to your creative cloud application. The creative cloud application checks the update once a day, so you may see the update immediately.  If you want to force the check for an update at the beginning please logout and log back into the creative Cloud application.

  Link to 19.0.1 release notes: https://helpx.adobe.com/illustrator/kb/illustrator-cc-2015-crash-bug-fixes-19-0-1.html

  If you continue to see any questions send us an e-mail to [email protected]

  Kind regards

  Ashutosh

  The name of the Illustrator team engineering

• I have a site published under a recent URL, I used for a personal site and the site displayed the URl needs to be removed, but I can't take it down because I do not know the account info that it is under please help! Thank you!

  I have a site published under a recent URL, I used for a personal site and the site displayed the URl needs to be removed, but I can't take it down because I do not know the account info that it is under please help! Thank you!

  If it is hosted with Adobe Business Catalyst Adobe Support can help you.

  If it is hosted elsewhere the only people who can help you with that is where it is hosted.