I want HP recovery Disc. But the customer does not give me any recovery disk.

Similar Questions

• Want to reinstall XP but the computer does not recognize the cd drive and does not allow for any installation.

  Accidentally deleted some system files and now the computer won't allow me to install anything. Tried to install a new cd player to replace a corrupt, but it does not recognize drive. All the driver and OS install CD. Help.

  Fix missing files:

  Try to run the checker system (CFS) files.  Press start, select run, type: SFC/scannow

  SFC will ask your installation disc (which you must have if you are going to re - install), put it in the drive when requested.  Leave the SFC to replace all missing or corrupt files.

  To resolve the startup problem:

  Check your BIOS Setup and make sure the optical drive is enabled and listed before the hard drive in the boot order.  When you start, there will be a message, "type any key to boot from the CD-ROM."  Type any key (execpt shift, shift caps lock, NumLock, etc) will cause the CD to be initialized in the installation program.  (I use the space bar, it's an easy target.)

  In addition, it would be useful to know a few more things: 1) what edition and service pack level of Windows XP you are running?  (2) what is the model and manufacturer of the optical drive, please?

• I installed photoshop cs5 on my macbook pro, but now have a desktop computer iMac, how to install the photoshop desktop too? I still have the disc but the iMac does not accept the serial code (number appears too short?) How can I fix it? also, I'm sure

  How can I install my pupil-master photoshop on my new iMac when I already installed it on my macbook pro 3 years ago? Serial number appears "too short" when it asked me to type in it.

  Hi Karina,

  Please see this link:

  Quickly find your serial number

  Let me know if it helps.

  Concerning

  Megha Rawat

• I have rebuilt my laptop Gateway MX6625, did not drive recovery, is went to the gateway web site, all the drivers have worked except the multimedia sound. The gateway was no help, they told her, but the there does not work

  I have rebuilt my laptop Gateway MX6625, did not drive recovery, is went to the gateway web site, all the drivers have worked except the multimedia sound. The gateway was no help, they told her, but the there does not work

  Hello JesusVigo,

  Thank you for visiting the Microsoft answers community.

  Have you tried to use the disk of Windows XP, or Windows Update running default drivers to search for best driver for your sound card?

  Also, I found only 1 driver on your system gateway Web site is located here.

  Hope this helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I bought indesign cc 15 and I want to download the version previous (2014), but the option does not appear in my window. Can you help me?

  !

  I bought indesign cc 15 and I want to download the version previous (2014), but the option does not appear in my window. Can you help me?

  !

  Download previous versions of Adobe Creative applications-

  http://helpx.Adobe.com/creative-cloud/kb/download-previous-versions-creative-applications. HTML

• 2000-2D02TU HP: HP 2000-2D02TU Power LED power switch but the laptop does not start.

  Someone help me.

  HP 2000-2D02TU Power LED power switch but the laptop does not start.

  What I'm doing.

  Please help me

  Model No. - HP 2000-2D02TU

  Hello @Alok_Bhai,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

  I read your post on the laptop won't start does not and wanted to help you!

  You indicate that the lights are flashing, but the laptop does not start?  If this is the case, try to review the following document and let me know how it goes:

  Computer does not start and emits a LED or beep Code

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Can Windows Media Player XP play MTS file type? I tried, but the video does not play smoothly. Is this fix really?

  I tried, but the video does not play smoothly.  Is this fix really?

  There is a possibility that Windows Media Player could
  read the file if you rename the MTS to MPG or AVI.

  And/or...the suite of freeware Media Player can be
  worth a try.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Media Player Classic Home Cinema
  http://MajorGeeks.com/Media_Player_Classic_Home_Cinema_d6213.html
  (works on XP/Vista/7)
  (The name of the file to download is: "MPC - HomeCinema.1.5.2.3456.x 86 .exe ')

  If this fails, it may be worth trying to convert the MTS file
  WMV format:

  There are many converters available on the net... some
  free... some detail.

  The following freeware converters are a few examples:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  (1) Sothink Free Video Converter
  http://www.Sothinkmedia.com/video-converter/
  (Windows XP / Vista / 7)

  You will need to unzip the file... or you could just drag
  the Setup.exe from the file out of the folder and drop it on your
  desktop and install from there.

  Once installed... Open Sothink and go to... Add the files button...
  Find and select the clips you want to convert.

  Next... in the encoding settings... Choose... Video credits.
  WMV - Windows Media Video (*.wmv).

  Choose an output folder and on the left, click on the button convert.

  You can experiment with other settings later but
  This should help you get started.

  (2) format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup270.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag FFSetup270.exe out of the folder
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

• CD player passes all tests but the computer does not start from cd player

  CD player passes all the tests, but the computer does not start from cd drive. entered the bios and it specifically indicate to boot from the cd drive. Windows 7 installation disc does not start. Win 7 disk works in another computer to start. Why is it not this cd player read the disc and from the win 7 installation process?

  I see this problem on systems having older IDE and SATA drives requiring firmware updates and assigned to the region 1 aka they boot from XP CD, but not DVD windows 7or media.

• HP dv7-3085dx power light flashes, but the laptop does not work.

  Hello! I have a HP Pavilion dv7-3085dx. It has a hard drive Bay 2.

  Recently, I bought the caddy + cable kit and an Intel SSD. The thing is, when I plug the sata cable to the motherboard for the laptop, and the SSD to it, the laptop does not light. When I press the power button, it flashes once (the power LED flashes once), but the laptop does not light. When I press again, nothing happens.

  I tried to remove the power supply plug, battery and plug it all again, but the power light flashes once (when you press the power button) and no reaction.

  Maybe it's the sata cable: when I remove the new cable and connect the SSD with the sata cable on the 1 hard drive Bay (the cable supplied with the notebook), it works fine. The laptop starts. And when I connect the former sata cable, with the SSD on the second hard drive Bay, it also works.

  I just want to now what is the flashing light means light? Why it does not work with the new cable?

  Thanks in advance! Sorry for my bad English...

  Emilio.

  It is possible that this is a problem with the kit. I would recommend to download and install the latest BIOS update for your laptop, using the download at the following link: http://goo.gl/rbHkg

  If it still doesn't work after that, I would recommend to suppress the kit for a replacement or to try another.

• After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices &amp; their very good WiFi signals. Please help me solve this terrible problem...

  After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

  (1) restart you device.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth). Channels 1, 6 or 11 are recommended for 2.4 band.

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes. Try to restore as New first and test it. If ok try to restore the backup (the backup may be corrupted).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple store for the evaluation of the material. The Wi - Fi chip or the antenna could be faulty.

  Council: https://discussions.apple.com/docs/DOC-9892

• Some records are not in my list of bookmarks; the individual bookmarks can be found in the search, but the record does not show.

  Some records are not in my list of bookmarks; individual bookmarks can be found in the search, but the folder does not appear in the list of bookmarks, and results do not indicate where the individual bookmarks.

  You can use an add-on to display add a column to the Library dialog box for the folder of the bookmark.

  https://addons.Mozilla.org/firefox/addon/show-parent-folder/

  The extension can indicate only the name of the folder or you can view the full path via the menu in the folder. This full path option is useful if a file accidentally gets you drag somewhere in order to explore the it and find it.

  To access the settings of the extension, you can use the page modules. Either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click Extensions. Then, find the Options button under the specific extension.

  A little luck?

• When a link to open another application and firefox is closed, Firefox opens but the link does not work

  I use Firefox on Mac OS 10.9.2, 29, this problem has occurred on the OS 10.8 ~ and various other versions of FF. I use 29 simply because I like it!

  The problem: Firefox is configured as the default browser in all directions it is possible to set as the default value. However, when I click on a URL from any application and Firefox is closed, Firefox opens opens, my last session of navigation tabs start, but the link does not open. I must return to the application and click the link again. This only happens on Firefox. I can put any other default browser and it will open the link in a closed state.

  This is happening to me, same, on Mac OS X 10.6.8 but only since I've upgraded to the latest version of Firefox, 32.0.1. I can click on a HTTP link in another application and Firefox becomes the active application, but it will not load a new tab for the link, as expected. Instead, it just sits there. I have to go back to the other application and click on the link a second time, during which point Firefox correctly open a new tab and load the destination URL.

• Speed dial installs, but the icon does not appear

  I used speed dial for a long time, both on my desktop and my laptop, and I really like it. Recently, I got a new office and installed the latest version of Firefox. Everything seems to be working well, but when I try to add Speed Dial, it appears to install correctly, but the icon does not appear in the menu bar. I tried several times and each time I like Speed Dial will be installed after I restarted Firefox. However, by clicking on the button will restart FF, but the icon never appears! What goes wrong, and how can I get Speed Dial to work for me, as it has always done?

  Dial manual > getting started - http://speeddial.uworks.net/gettingstarted.html (see paragraph beginning "when this extension is installed... »)

  • This is the same as the other buttons on the toolbar add - see: https://support.mozilla.org/en-US/kb/customize-firefox-controls-buttons-and-toolbars#w_how-do-i-customize-or-rearrange-toolbar-items

  Complete manual of dial - http://speeddial.uworks.net/manual.html

• My mini ipad 4 has no battery completely not discharged, called to the charger, but the system does not start. What should do?  Already a time connected to the charger, but the system does not start. I have iPad 3 months and never suffered no damage.

  My mini ipad 4 has no battery completely not discharged, called to the charger, but the system does not start. What should do? Already a time connected to the charger, but the system does not start. I have iPad 3 months and never suffered no damage.

  When connected to the charger make a forced reboot: hold the home and sleep buttons, wait for the Apple logo, release the buttons. May take a few tries.

• Re: Satellite A300-21I trying to start but the screen does not light upward

  I have a laptop Toshiba Satellite A300-21I 15.4-inch around the age of 2 months.
  He walks yesterday and received a message (very short)-initialization failed, see the event log.

  Laptop computer tries to start but the display does not illuminate.
  No prior problems.

  The indices of anyone?
  Stanley

  Hello

  You are able to access the BIOS?
  You see a Toshiba start screen that usually appears at the beginning?

  What happens if you press F8 at the beginning of the boot process?

  Please provide more details!