I want to compare the 'brightness' of two images using a template image and an image acquired
For the most part looking for suggestions on the best way to go about it. Im trying to run a test that will allow me to compare the brightness of an LCD screen using a webcam. Essentially, I let power on the screen, and from time to time, the screen will be incredibly dim. IM thinking I should be able to use the functionality of the subtraction with both images and if I have a normal screen it should produce a closure to 0 results, while the dark screen should give a non zero value (pixel wise) but have so far not been successful.
http://zone.NI.com/reference/en-XX/help/370281AA-01/imaqvision/imaq_light_meter__point/ I used the rectangle version but this block instead of going with a subtraction! Being new on and auto teaching labview I often oversteps these easy solutions
Tags: NI Software
Similar Questions
-
On the same worksheet, I want a spreadsheet to compare spending 2015 totals by month in several categories to 2016 expenses when they occur. What is the best way to implement this worksheet? It is essentially a budget, but wants to see how the category spending increase or decrease all the months for 2016.
Thanks for any help.
Hi Bruddah,
I would like to start by rearranging your table so that the amounts from here to 2015 and 2016 switch not in the column, as implied in your question.
Vocabulary of the numbers:
worksheet not sentence numbers
Worksheet: A spreadsheet. Usually abbreviated to 'Document '.
Leaf: a blank canvas on which are placed the tables and other objects. A Document has at least one and maybe more than one.
Table: an object consisting of one or more cells, arranged in rows and columns.
Take a look at the personal Budget template (file > new form model...), specifically the summary in the table of categories.
It uses the formula: = SUMIF (Transactions::Category, A2, Amount)
Since you want to compare the volumes in several CATEGORIES at the specific two-year MONTH, you will need SUMIFS, using three test values, pairs of condition.
Syntax: = SUMIFS (sum of the values,test values,condition,test values,condition,test values,condition)
I would like to know if it is enough information. If this isn't the case, I'll be later in the day to enter more specific details. In the meantime, a screenshot of your table and the lines of (at least) your transactions table header would be probably useful.
Kind regards
Barry
-
Compare the content of two equal nested tables
I'm working on a black box test where I compare the contents of two structurally equal tables before and after executing a script of some. My two tables, MDQ_OLD and MDQ_NEW, are filled with the data in two separate operations.
The two tables, I'll compare are nested, as you can see in the CREATE TABLE scripts below.
I tried to use the less-operator sign, but without success.
I also tried to select data in a type that is % ROWTYPE to my nested tables, but it does not work as well (see the below script in this post).
Can you please help me on this problem on how to compare the content of two nested tables?
Run the scripts below to reproduce the problem and be sure to update this post if more information is required.
-The scripts below-
Select * from version of v$.
Oracle Database 11 g Enterprise Edition Release 11.2.0.4.0 - 64 bit Production
PL/SQL Release 11.2.0.4.0 - Production
CORE Production 11.2.0.4.0
AMT for Linux: Version 11.2.0.4.0 - Production
NLSRTL Version 11.2.0.4.0 - Production
-First of all, I create my types
CREATE OR REPLACE TYPE FORCE AS OBJECT MDQ_DETAIL (NUMBER OF MDQ_DETAIL_ID, MDQ_DETAIL_DESC VARCHAR2 (100));
CREATE OR REPLACE TYPE T_MDQ_DETAIL AS TABLE MDQ_DETAIL;
-Note that this type contains the table T_MDQ_DETAIL type:
CREATE OR REPLACE TYPE MDQ_PARENT FORCE AS OBJECT (NUMBER MDQ_ID, MDQ_DETAILS T_MDQ_DETAIL);
- Then I create two equal nested tables
CREATE THE NESTED TABLE AS MDQ_PR_OLD STORE MDQ_DETAILS MDQ_PARENT MDQ_OLD TABLE.
CREATE THE NESTED TABLE AS MDQ_PR_NEW STORE MDQ_DETAILS MDQ_PARENT MDQ_NEW TABLE.
-Insert test data in the nested tables
Insert into MDQ_OLD (MDQ_ID, MDQ_DETAILS) Values (1, T_MDQ_DETAIL (MDQ_DETAIL(1,'desc1')));
Insert into MDQ_NEW (MDQ_ID, MDQ_DETAILS) Values (2, T_MDQ_DETAIL (MDQ_DETAIL(1,'desc1')));
-Try to use the negative operator to compare the contents of the trailer of the nested tables, but it gives this error:
-ORA-00932: inconsistent data types: expected - got DISPATCH. T_MDQ_DETAIL
Select * from MDQ_NEW
less
Select * from MDQ_OLD;
-Try to select in a ROWTYPE, but it fails
declare
myTypeOld MDQ_OLD % ROWTYPE;
myTypeNew MDQ_New % ROWTYPE;
myTypeDiff MDQ_New % ROWTYPE;
Start
-Select gives: PLS-00497: do not mix between row and several rows (in BULK) list
Select * bulk collect into mdq_old myTypeOld;
Select * bulk collect into mdq_new myTypeNew;
-Need a 'compare the function of membership card' on the types of multiset except to work, but as far as I
-I'm not able to bulk collect into myTypeOld or myTypeNew, this won't help out me.
myTypeDiff: = multiset myTypeOld except myTypeNew.
end;
-Cleaning:
drop table MDQ_OLD;
drop table MDQ_NEW;
type of projection MDQ_PARENT;
type of projection T_MDQ_DETAIL;
type of projection MDQ_DETAIL;
> queries you provided intercepts not who.
You asked how to compare the content of nested tables.
I knew that you didn't ask for what you actually want, that's why I asked you to specify the comparison more in detail.
> Do you have a query that grabs this difference as well?
SELECT o.mdq_id, od.*
OF mdq_old o, TABLE (o.mdq_details) od
LESS
SELECT n.mdq_id, nd.*
OF mdq_new n, TABLE (n.mdq_details) nd;> Also, if possible, do you have a sample of a statement to COLLECT LOOSE, please?
Actually, you raise an interesting point on using % ROWTYPE, in my view, that should be. This make...
DECLARE
TYPE rt_mdq_new () IS RENDERING
mdq_id NUMBER,
mdq_details t_mdq_detail);
TYPE tt_mdq_new IS TABLE OF THE rt_mdq_new;
t_mdq_new tt_mdq_new;
BEGIN
SELECT mdq_id, mdq_details
LOOSE COLLECTION t_mdq_new
OF mdq_new min.;
END;
/DECLARE
CURSOR c_mdq_new
IS
SELECT mn.*
OF mdq_new min.;
TYPE tt_mdq_new IS TABLE OF c_mdq_new % ROWTYPE;
t_mdq_new tt_mdq_new;
BEGIN
OPEN c_mdq_new.
Get the c_mdq_new COLLECT in BULK IN t_mdq_new;
CLOSE C_mdq_new;
END;
/ -
How to compare the value of two combo
I have two Combo Box (cbFirst & cbSecond). I want to compare the value that has been selected by the user and according to the result, the output is displayed. In the two combo box, I have provided the value.
Here is my code:
var a: number;
var b:Number;function First(evt:Event):void {}
a = evt.target.value;
trace (a);
}
cbFirst.addEventListener (Event.CHANGE, first);function Second(evt:Event):void {}
b = evt.target.value;
trace (b);
}
cbSecond.addEventListener (Event.CHANGE, second);If (a > b) {}
trace ("more")
on the other
trace (b is higher);
Trace the statement inside the functions work very well and the value correct a & b is printed. But the comparison in the if statement does not seem to work. Could you please help me.
There is a typing error. Fix it or delete it:
var a: number;
var b:Number;function First(evt:Event):void {}
a = evt.target.value;trace (a);
compareF();
}
cbFirst.addEventListener (Event.CHANGE, first);function Second(evt:Event):void {}
b = evt.target.value;
trace (b);compareF()
}
cbSecond.addEventListener (Event.CHANGE, second);function compareF() {}
If (a > b) {}
trace ("more")
on the other
trace (b is higher);
}
-
Cannot find view in the Application settings. You want to control the brightness.
"Control the brightness of the screen on Firefox OS
How can I control brightness manually or automatically?Adjust the brightness of the display using the display function in the settings app.
Tap the Settings app and choose Display."
Above are instructions for controlling the brightness in Foxfire. The settings application appears under Options and does ' t have display. I looking in the wrong place?
Hi TheWeav, the article you mentioned is for the new phones of filed. Is your question about one of those or Firefox on your Windows XP system?
Versions of Firefox for desktop computers do not have a brightness adjustment. You can adjust the brightness of your display using the global setting for Windows, which may include some special on your keyboard function keys or a Windows Control Panel.
If you want only to adjust the brightness of the pages in Firefox - to moderate the white backgrounds, for example - you could try an add-on.
- In this thread, the NoSquint extension suggested: How to change the brightness.
- Several independently developed modules are marked with the keyword 'brightness' and might be worth a review: https://addons.mozilla.org/firefox/tag/brightness?platform=windows
You can find a good solution?
-
How to compare the content of two files so I can delete duplicate records
I'm trying to clean up several subfolders with duplicates without looking at the details of each record. Is it possible in Windows XP to compare the content of two files whether they are an exact replica.
Hi rav42010,
Follow the steps in the article.
Description of the tool in Windows XP disk cleanup
http://support.Microsoft.com/kb/310312
You can also use third-party app to perform the task using your favorite search engine.
Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
-
How to compare the content of two Wordpad / documents notebook without reading them line by line?
Hello
Without this feature is included in the operating system.
However, you can use your favorite search engine to look for software that needs to perform these tasks.
WARNING of THIRD PARTY SOFTWARE: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
Hope this information helps.
-
compare the fields of two queries
I need to compare the fields of two queries.
I went through many articles to asktom help operator less. but I'm not convinced by this method.
Comaprisons are for about 10 fields.
So I'm planing to do using sliders and nested loops. performance can be a problem.
Please give your suggestions or solutions.OK, using the data you provided, I get this:
with map_test_fac as (select 100 idid, 789 ifid, 300 edid, 741 efid from dual union all select 100 idid, 123 ifid, 300 edid, 963 efid from dual union all select 100 idid, 456 ifid, 300 edid, 258 efid from dual), test_fac as (select 741 facid, 'ETY' type, 'EUR' ccy, 'Ext' src, 300 did from dual union all select 789 facid, 'WE' type, 'EUR' ccy, 'Int' src, 100 did from dual union all select 123 facid, 'VPR' type, 'EUR' ccy, 'Int' src, 100 did from dual union all select 456 facid, 'ETY' type, 'USD' ccy, 'Int' src, 100 did from dual union all select 963 facid, 'WE' type, 'EUR' ccy, 'Ext' src, 300 did from dual union all select 258 facid, 'VPR' type, 'EUR' ccy, 'Ext' src, 300 did from dual) -- end of mimicking your data: USE SQL below: select tfi.facid int_facid, tfi.type int_type, tfi.ccy int_ccy, tfi.src int_src, tfi.did int_did, tfe.facid ext_facid, tfe.type ext_type, tfe.ccy ext_ccy, tfe.src ext_src, tfe.did ext_did from test_fac tfi, test_fac tfe, map_test_fac mtf where mtf.ifid = tfi.facid and mtf.efid = tfe.facid and mtf.idid = tfi.did and mtf.edid = tfe.did and (tfi.type != tfe.type or tfi.ccy != tfe.ccy) INT_FACID INT INT INT INT_DID EXT_FACID EXT EXT EXT EXT_DID ---------- --- --- --- ---------- ---------- --- --- --- ---------- 789 WE EUR Int 100 741 ETY EUR Ext 300 123 VPR EUR Int 100 963 WE EUR Ext 300 456 ETY USD Int 100 258 VPR EUR Ext 300
However, I think that your mapping data is incorrect, so with keys of information:
with map_test_fac as (select 100 idid, 789 ifid, 300 edid, 963 efid from dual union all select 100 idid, 123 ifid, 300 edid, 258 efid from dual union all select 100 idid, 456 ifid, 300 edid, 741 efid from dual), test_fac as (select 741 facid, 'ETY' type, 'EUR' ccy, 'Ext' src, 300 did from dual union all select 789 facid, 'WE' type, 'EUR' ccy, 'Int' src, 100 did from dual union all select 123 facid, 'VPR' type, 'EUR' ccy, 'Int' src, 100 did from dual union all select 456 facid, 'ETY' type, 'USD' ccy, 'Int' src, 100 did from dual union all select 963 facid, 'WE' type, 'EUR' ccy, 'Ext' src, 300 did from dual union all select 258 facid, 'VPR' type, 'EUR' ccy, 'Ext' src, 300 did from dual) -- end of mimicking your data: USE SQL below: select tfi.facid int_facid, tfi.type int_type, tfi.ccy int_ccy, tfi.src int_src, tfi.did int_did, tfe.facid ext_facid, tfe.type ext_type, tfe.ccy ext_ccy, tfe.src ext_src, tfe.did ext_did from test_fac tfi, test_fac tfe, map_test_fac mtf where mtf.ifid = tfi.facid and mtf.efid = tfe.facid and mtf.idid = tfi.did and mtf.edid = tfe.did and (tfi.type != tfe.type or tfi.ccy != tfe.ccy) INT_FACID INT INT INT INT_DID EXT_FACID EXT EXT EXT EXT_DID ---------- --- --- --- ---------- ---------- --- --- --- ---------- 456 ETY USD Int 100 741 ETY EUR Ext 300
That's more like what you're looking for?
-
What is the best way to adjust the brightness in multiple files using elements 13?
I have about 100 JPEGs that I need to cheer up. I need to adjust the brightness in "100" on each; is there a quick way? "Treat multiple files" does not...
Thank you!
john_oc wrote:
I have about 100 JPEGs that I need to cheer up. I need to adjust the brightness in "100" on each; is there a quick way? "Treat multiple files" does not...
Thank you!
Simple and powerful: use the ACR (Camera raw).
Depending on the power and the amount of RAM on your computer, you can now open and edit multiple files at the same time in the ACR module.
Use the menu file/open in camera raw.Select a batch of files (say 20 to begin by)
Select all the files in the camera roll on the left.
When they are highlighted, you will notice that the ACR module shows its AutoCorrect settings. Generally the brightness of your images will already be improved.
The changes you apply to the sliders will change all the images highlighted.
Take advantage of the opportunity to refine all the other sliders made highlights/shadows, clarity, vibrance, sharpening or noise reduction...
Tip:
What you do in the ACR module do not alter the original jpeg pixels. Only the parameters are saved, which is called parametric edition. So after this editing session, when you save the changes ('Done' button), you are able to reopen the jpeg (it will open automatically in ACR, even from the Organizer). You will be able to start editing with either:
1 - the values of the original jpeg (turn all the sliders to zero, auto or custom in the right panel).
2 - the AutoCorrect default CAB
3 - your latest changes (settings file)
4 - the session settings of most recent edition (which is useful to apply to several image consecutively).These settings are saved in the jpeg metadata section. No need to create a version set at this stage.
Important: even if you are happy with the automatic settings default to ACR, apply a little change of your choice so that the settings are saved in the metadata section when you click on 'Done '.
You have now edited your first batch. If you use the orgnizer, you might want to "update thumbnails', which show the improvement of brightness in thumbnails. You are ready to make the necessary changes to individual files, such as cropping or sharpening in ACR. Instead of clicking "Done", you can click on 'Open' to open the file in the Editor (you can change in 8 or 16-bit). You must go into the editor to apply other changes as layers, local adjustments. you use the editor to register in any other format file or print.
For the next batch, the mounting parameters are available in the dropdown to the right (previous conversion). Open files, highlight all, select previous conversion, click 'Done '. Wait for the settings to be saved in jpeg files.
In a situation where you have 100 files JPEG, the workflow that the above is by far the fastest and most flexible you can use. Imagine you have a white balance bad setting of your camera, you can imagine the time you need by editing individual files in the editor?
-
Print the computer name on each page using a network printing
Dear all,
Help on this issue. I want to print the username in each page using the network printer. To identify which print this page.As much as I know that you can't do this with every printed page, but you can use the separation pages (* .sep) and have this printed on a single page at the beginning of each print job.
Tip: Put the separator page in the folder % WINDIR%\System32.
See here: http://support.microsoft.com/kb/102712
.Sep file is just a text document, the following prints only the user name:
Name $LUser $N
$EJohn
-
Automate the exchange of two images in the document.
Good afternoon! A friend here can direct me to a nice script to automate the exchange of two images in the document, E.g.: when you select two layers A and B would look like this: picture A to picture B by changing the image B for the "Inversion of images' image and, if possible, keep the same report. Thank you!
I found an old version that I changed and now it works with CS5 and CS6 lets hope it work in CC.
-
I'm new to Mac. I want to reset the preferences in Lightroom CC using a MacBook Pro
I'm new to Mac. I want to reset the preferences in Lightroom CC using a MacBook Pro
This link provides additional information to what I want to know exactly which file to delete
6 https://helpx.adobe.com/Lightroom/KB/preference-file-and-other-file-locations---Lightroom-html
Have you tried pressing O or unchecking it in the toolbar (T)?
-
I had the deparquement cloud testversion and now I want to buy it in the monthly OBA for 59.99 euros. I have an Adobe ID, but when I want to pay the abo it says payment system is not available and it is also the telephone hotline adobe! I really need the software of any emergency! No idea why I can't pay online? That's what he says in tiny letters below: USER_STORE_COUNTRY_MISMATCH?
Hi Frederic,.
The country store & the Adobe ID, payment details must be same.
For tax reasons, it is not possible to change the country associated with an existing Adobe ID. To work around the problem, you can create a new Adobe ID to the e-mail address associated with your existing Adobe ID see the link for instructions:
Change the country associated with your Adobe ID
Guinot
-
Two tables provided, how you retrieve the values in two columns using values in a column (the pass get values. If col. A is not null values and get the pass. B if col. A is null)?
Guessing
Select nvl (x.col_a, y.col_b) the_column
from table_1 x,.
table_2 y
where x.pk = y.pk
Concerning
Etbin
-
Calculating the distance between two images... ?
Hello
I'm trying to calculate the distance between two images (A and F - there are other images between A and F), but I can't seem to understand how to make good sense.
Image A.x is "(stage/2)-(A.width/2)" and the image of F.x is "provable - imgSpace" which is a negative value (all images x is a negative value for image A.x). "
In my view, the calculation is F.x - A.x, and although it could be good I still ned the value to be non-negative.
Does anyone know how to do this?
Thanks in advanse...
I think you can find out the distance with this equation,
var len:Numer = Math.abs (A.x - F.x);
Maybe you are looking for
-
Mail - now completely destroyed me, help appreciated!
My SSD on MBAir became full so I decided to make a few mailboxes, export to an external drive and then delete it. During this process, which was fine, something was wrong to export a large box and mail crashed. When I tried to re-opening, he came for
-
Some random got my apple id and all my contacts have been deleted and I have their pictures on my phone, really need help
-
Equium U400-146 begins to turn off randomly
I bought a new Toshiba Equium from PC World, and everything worked perfectly well on... But a month later it starts then turn off randomly (that is not caused by overheating), and I have to take out it and put again to start again. He has not been ab
-
test of the structure of the case
Hi all I use the Structure of the event in a tab control. On page 1, there is a Table control and when the mouse is clicked on it, it returns the value of the cell. The event is ablsolutely very well work, but the problem is that I have no idea how t
-
which is the last driver for a Canon PowerShot G3 camera
Plug in the cam and even putting the CD installation does not detect my pc I