I want to connect my speakers to my surround sound system Brookstone wireless

Similar Questions

• I want to connect to multiple wifi networks, but with a unique wireless adapter?

  After much research on the internet I found a Virtual Wifi software that makes virtual adapters wireless with a single physical card. I download and installed this software but I don't know how to use it. There is no desktop icon or anything to change in my laptop.

  Can you please tell me some solution.

  I suggest you contact the software manufacturer for instructions on how to put up with your system.

  It should not be necessary buy additional routers.

  Eddieb

• How to connect external speakers to Satellite A100-451

  Hello

  I have a Satellite A100-451 (UK) running Vista. I want to connect external speakers. There is a "headphone" Jack on the front (3.5 mm jack I think), can I connect external speakers here? The speakers are "PC Line" with their own power supply and also have a 3.5 mm jack plug).

  Thank you

  KK

  You need the audio Line out put and the headset jack provides this output.
  In other words, you can use this Jack to connect external speakers

• New engine audio speakers are volume levels asymmetrical, even if I double checked all the connections and checked through balances of speaker system preferences. Help, please?

  I have an old desktop iMac to less than 1 year, I've upgraded to El captain of Yosemite.  Just fine, except the quality of the internal speakers.  Yesterday, I received speakers brand new engine audio 5 +.  Hooked by instructions.  Between the speakers volume levels are completely unbalanced. His active in Preferences system - balanced in the Middle, 50-50.  Verified in applications/utilities-audio MIDI output, everything is correctly set.  I can get pay only by the reduction in volume of the speaker on the right to almost nothing, but then I have no more volume than offer the internal speakers.  Any solution would be greatly appreciated.

  You use the audio output from your Mac an entry in your speakers or you cross an external DAC first?

  I also have the A5 speakers +, and I also use their USB D1 DAC which then audio output runs to the speakers.  Yosemite was a constant headache with my setup, but appears to have been eliminated with El Capitan.  I installed OSX to El Capitan, as well as later make a clean-install of El Capitan purely for my wanting a clean and in both cases, the sound system was very good.  Those who speak of fantastic, better that I have owned yet.

  Can you be more specific with how your output of iMac is done?  As usually, always check, then check your connections in your speakers and make sure that the audio cables are intact and not frayed.  If you use the headset, ensure that the headphone cable is robust and doesn't look like not to is damaged/twisted.

  You can consider getting the audio DAC AudioEngine to manage your Mac, as it is much better than one built-in that comes in your iMac.  I use it on my new iMac 5K that I received a few weeks ago.

  http://audioengineusa.com/store/digital-audio-converters/D1-24-bit-DAC

• Cannot locate the entries (or jack) to connect external speakers in Optiplex 760

  I want to connect external speakers to my Optiplex 760, but can't find the place to do it.

  I tried to connect to the headset port, but it will not work for external speakers.

  Thank you

  Rob in Arizona

  ESP Audio does not work when the OEM driver is not installed with WINDOWS 7 or 8 or 10.

  Description	Download
  Analog Devices ADI 198 x integrated HD Audio driver This package provides the Analog Devices ADI 198 x integrated High Definition Audio Driver and is based on the precision and OptiPlex running the Windows operating system at the following address: Windows 7. More details
  Analog Devices ADI 198 x integrated HD Audio Driver This package provides the Analog Devices ADI 198 x integrated HD Audio Driver and is available on Precision, OptiPlex, and Latitude models that run the Windows operating system at the following address: Windows 7. More details

  ESP AUDIO Control Panel Soundmax Applet which 'sees' the speakers and the headphones etc plugged into the audio codec or NOT.

  

  The problem is that by default, windows 7 or 8 or 8.1 10 will use a generic HD Audio driver and therefore things like the internal affairs speaker will not work and soundmax Audio ESP does not exist.

  

  The solution is to install the Dell driver and let windows update to decide if the driver needs to update whql.

  It is a common problem.   The function Audio ESP asking you what is attached to the port is not enabled in generic win7, win8, pilot win10.  You will also need to install DOTNET 4.0 and Directx June 2010

  Before installing this driver.  You must also add the feature back for legacy Live Show on Control Panel.  If you do all the right things in the right order, it will work.  Control Panel, all the elements of the Control Panel, programs and features, windows features, turning on and outside

  Then do the check boxes.  You MUST BE online when you do this, because he lament not find features and who need to download them from windows update.

  

• Want to 750-209: how to connect an old sound system to a new computer

  I wanted a new 750-209 and a former speaker of Cambridge Soundworks PCWorks 19th Point Surround 4 + under low voltage. There are 2 connector; Left and right who are article 3 (each take manages 3 drivers). The envy has 1 output. It seems that I need a derivation ending in female connectors.

  My question? How to connect the two? Is it still possible? I'd hate to have a decent sound system of junk. My needs are basic - just to be able to listen on AOL or YouTube.

  Any ideas on how to accomplsh my goal.

  Just to close this debate; unfortunaely the quick response has not responded to the problem. BestBuy has suggested that I try a composed of derivation of a shot and 2 containers. Finally, I got the system works 'after' discovery that the enormous power brick disliked the new arrangement of power when I replaced the old computer with the desire. I had to replace an adapter 3 - wat and consolidate the brick. A lot of noise to get her old system to work but now I have the choice of speakers or headphones driven by a hold on a HDMI monitor. All's well that ends well. Thanks for the interest.

• Internal speakers work but no sound when the headphones are connected.

  Internal speakers work, but no sound when the headset is connected Mr. fix gives a clean and level flight controlpannel indicator report / sound show sounds present but no sound on 3.5 mm jack audio 6.0 vista Home Basic travel mate acer 2480 laptop.

  Ive seen to be a common problem and have tried everything short of putting my computer or the cabel in the freezer for this problem, although I had an old pair of computer speakers that the power of the headphone plug in my garage-30 and a jack 3.5 cold didn't help.

  Most recent driver realtek audio and Manager running audio acer, everything seems fine all levels on and not cut anything off
  Lists of control pannel/sound/speakerproperties
  control information
  Realtek High Denifnition
  Reatek'a

  Jack information
  LR ATAPI internal ATAPI
  LR 3.5 mm Jack (will disappear if not plugged headphones\auxcabel)

  some levels are muted
  Advance tab default settings
  quality of studio 24 bit 48000 Hz

  boxes of exclusive mode checked (when it is disabled, that no sound was heard)

  Information appears a jack was pluged into and when unplugged.

  the computer knows its their and it shows his work but ive tried several pairs of headphones, including the new ipod with the remote, I tried an old pair of speakers that have no other energy source that 3.5 mm cord all work witch on my i pod, I also tried pluging in a splitter first and also an adapter to use a guitar cord pluged amp in an another apapter back down to 3.5 mm a little stupid and redundant but I didn't lie when I said I TRIED EVERYTHING I could think maximum\ read forums\ many watch on youtube.

  computer repair guy told me that fault call manufacturing equipment but guaranteed was 2 weeks upwards.
   
  I do not think it is a matter of hardwear tho and am convinced that it can be resolved is so close to work, I'm sure there must be a setting or patch or codec sumthing that will correct the problem, but it's my first (LIRA) ask for help.

  With frequent this problem or other similar appear from what my research has shown that I don't know that it can be resolved, or millions of laptops with drivers realtek audio hd are all defective.

  My next try is an external usb sound card. I tried already but no stores in my area have them (Wal-Mart, the source, Staples), all had never heard what I was talking about. I saw on the web less than 5 dollars but have no confidence in the sites offering the devices. Has anyone bought from a trusted site.  could talk to the teak of microsoft but they wanted to charge me $ $50 so decided to save money to buy a card usb sound, if I can't solve the problem.

  Sorry for any ignorance or typos and long reading but I hope someone can help with this problem

  Check with the manufacturer of your system's support and their forums (if any).

  Have you checked on the website of the manufacturer of the device for the latest drivers?

  Realtek - HD Audio Codec Driver right side
  http://www.Realtek.com.tw/

  Download - SAVE - will click with the button straight on and RUN AS ADMIN

  NOTE: Often restore audio drivers to check the version after installing and restarting is
  see if the version you have installed is there, otherwise repeat the installation - restart until it is. This may take
  several tests according to the recommitments how much he makes.
  Rob - bicycle - Mark Twain said it is good.

• Pavilion 23tm - connect the speakers but connection problem

  I have a Pavilion 23tm connected to an Asus S550C laptop. I did not like speakers of the flag so I wanted to connect a pair of Bose multimedia speakers.

  To use the speakers, I can't use the HDMI cable to connect the monitor to the laptop but would need to use DVI monitor. The problem is that the laptop is not a DVI input (it has VGA) and the monitor does not have a VGA input.

  Is it possible to bypass the monitor speakers by using the HDMI connection?

  Or what should I do?

  DOH! Figured it out. Is there an easy way to disable the speakers to the monitor using the software.

• I want to connect my Macbook Air (IOS 10.9.5) with my amp stereo House (TEAC I-501DA), which has a USB connection. I followed the steps described in the manual TEAC to install the driver and my Mac says it is installed correctly, but it does not appear I

  I want to connect my Macbook Air (IOS X 10.9.5) with my amp stereo House (TEAC I-501DA), which has a USB connection. I followed the steps described in the manual TEAC to install the driver and my Mac says it is installed correctly, but it does not appear as an option in the preferences/system sounds.

  Version 1.1.2.2 El Capitan driver support, then why don't upgrade you your MacBook Air to El Capitan?

• My I pad want to connect to itunes

  ive tried to connect my iPad to my pc Itunes but it want to connect

  Make sure that iTunes is updated on your PC.

  1. Open iTunes.
  2. In the MenuBar at the top of the iTunes window, choose Help > check for updates. Learn what to do If you see not the menu bar.
  3. Follow the prompts to install the latest version.

• want to connect Apple TV but HDMI port is already in use.  Y at - it a triangle connector I can buy or?

  want to connect Apple TV but HDMI port is already in use.  Y at - it a triangle connector I can buy or?

  Sorry but no.

  Apple TV requires an HDMI cable and a HDMI port.

• How disable pop-up master password when I don't want to connect?

  When I visit some sites like stores the master password prompt appears. But I'm just browsing, I don't want to connect at this time. But mp appears on pages again and again, so I have to click on cancel every time, it's madness! Help, please.

  You will need to disable the Manager of temporary password to prevent a pop master password - up if you visit a web page with a log-shaped and you have already registered a name and a password in the password manager.

  • Tools > Options > Security: passwords: "remember passwords for sites".

• I want to connect to my existing to a new router Airport extreme

  I want to connect my extreme from the airport in a new router upgraded.  What should I do?

  Consult this manual.

  https://manuals.info.Apple.com/manuals/1000/MA1644/en_US/airport_extreme_80211ac _setup.pdf

• Hello everyone. I have a DVR installed at home and I want to connect to work to see the camera.

  Hello everyone. I have a DVR installed at home and I want to connect to work to see the camera. If I connect to my home network, Firefox will load the page but not the images because I'm missing a plugin. If I install explore this work because I have to install Hiactivex.cab. Y at - it a plugin to watch images from the camera DVR on Firefox?

  The place to inquire a plugin for Firefox is the manufacturer of this recorder.

• I have a macbook pro mid 2012 and I want to connect two monitors

  I have a macbook mid 2012 pro and I want to connect two monitors.

  as you know, I have a firewire port, port a thunderbolt and two usb ports.

  You can connect in series two screens Thunderbolt to your MacBook Pro.