I want to create a C: drive of my hard drive external mirror

Similar Questions

• Create the logical drive using the disk manager

  I want to create a partition for logical disk on an external hard drive using disk management

  Hello

  Disk management will create primary partitions until you create the 4th one, it is not customizable. If you want more options, you must use the diskpart command line, see: http://technet.microsoft.com/en-us/library/cc766465 (WS.10) .aspx Best of Luck, Rick Rogers, aka "Nutcase" - Microsoft MVP Windows help-www.rickrogers.org-http://mvp.support.microsoft.com

• Cannot create the new drive and impossible to reduce c drive I want...

  My laptop disk management displays the following information...

  (1) healthy OEM 14.75 GB partition

  (2) 200 MB Healthy (System, active, primary partition) (containing the system files)

  (3) c: in good health (start-up, swap files, dump, primary) (which contains Windows) total 421 GB, free 400 GB (which contains Windows)

  (4) D: sound logic GB 29 disc

  I want to shrink the C drive in 30 GB and want to do at least 3 drives more. I also have linux in the D drive.

  so when I want to shrink C drive, then it shows the size of available shrink space in MB 212653 and total size after shrink 219284MB. This means that my C drive will at least 219284MB. but I don't want that.

  Another problem, when I tried to create a new simple volume the following error comes.    You cannot create a new volume in this unallocated space because the disk already contains the maximum number of partitions.  What can I do?

  The existence of files across the disk will limit the amount by which you can reduce the volume.  You can defragment to reduce this, but there will always be property files that will create a limit for you.  I had to do a full install in a 70 GB partition for Windows CE - with my first attempt to install, I could not it less than 250 GB even if I tried to partition when installing Win7 had finished.

  I think you'll have to decide a complete reinstall to resolve the issues, but that's just my opinion.  During installation, choose the option to partition the drive & set it to create a partition that is not less than 70 GB and Windows will install fortunately in this.  You can then use the rest for a partition of data user files.

  You don't mention your brand of PC, but even once, as Palcouk said, you will have some facility in order to safeguard the partition image factory of the manufacturer of the PC in DVD or USB [Dells certainly have the USB option for this].  Fix this before whatever it is that you will destroy this partition when reinstalling and might also do so just try to move partitions.

• I want to create a Web site where people can choose a date and time and click on search, and it will find the photo of my HARD drive and show them on the page, is that poosible? If so could somone tell me how I will pay?

  I want to create a Web site where people can choose a date and time and click on search, and it will find the photo of my HARD drive and show them on the page, is that poosible? If so could somone tell me how I will pay?

  On your local HARD drive? N ° on your web server? Course

  How do you know php? There are exif function that can read EXIF headers on your images. You can use it in conjunction with the functions of file system scanning of the images on your web server. If you have thousands of images, you want to index the results in a database rather than search the real-time file system.

• I want to create a restore disk system on another HDD without having to back up the entire computer?

  I have Windows XP Professional, and I do a back up of all the windows files that I need to run windows (I hope) on a second hard drive. I want to create a file recovery from windows on this drive, but when I go in the options backup, I have to pick up the entire computer in order to get this recovery file created. But I don't want to back up all my personal files and programs because that would take in charge the secondary hard drive together.  How to create this recovery file without saving the entire hard drive? Thank you.

  I have Windows XP Professional, and I do a back up of all the windows files that I need to run windows (I hope) on a second hard drive. I want to create a file recovery from windows on this drive, but when I go in the options backup, I have to pick up the entire computer in order to get this recovery file created. But I don't want to back up all my personal files and programs because that would take in charge the secondary hard drive together.  How to create this recovery file without saving the entire hard drive? Thank you.

  If you do any type of backup - only circuit, dat, or all - on a second internal bank or a second partition, you are just kidding yourself. It is the lowest form of backup doesn't exist, and is barely better than no backup at all. He let losses likely to be simultaneous to the original and backup for many common dangers: serious power, near the lightning seeds, failures of hard disk (if it's a second partition), virus attacks, even the theft of the laptop.

  In my view, secure backup must be on a media removable and not stored in the computer. For backup really secure (necessary, for example, if your company depends on your data), you should have several generations of backup, and at least one of these generations should be stored off-site.

  You can read this article on the backup that I wrote: 'Return to top your computer regularly and reliable' to http://www.computorcompanion.com/LPMArticle.asp?ID=314

• I want to remove/erase/print driver to Windows 7 and can't find any documentation.

  New DELL Windows 7 computer (within 30 days) and want to remove persistent / printer driver.

  Could not find any documentation on the issue, and neither DELL nor Microsoft are willing to provide any type of support, unless its paid for a product or service that is less than 30 days old.

  OK, I found the solution to this problem... the info above is correct as it goes, but in my case, there was no option to erase the print on both printers 'ghost' queue because they were disconnected and (b) it has been shared on the network unavailable, so no option to the print queue was posted and had a printer assigned to TCP/IP port.

  Here's how I did, step by step:

  1. right click on desktop, create a new shortcut with the target under 'cmd.exe '.
  2. right click on the shortcut, "Run as Administrator".
  3. run the tool printui: printui/s/T2
  4. try to remove printers. If this does not work...
  5. click on start > run > Services.msc
  6 locate the print spooler service and right click > properties > stop him.
  7. open my computer and go to c:\Windows\System32\spool\Printers
  (you will need to say 'oK' to access the file).
  8 REMOVE the contents of this folder.
  9 restart the print spooler service.
  10. go back into the printui utillity (might need to restart using the same method as above) and try to delete printers again. This time it should work. If necessary, see the "Ports" tab and delete all TCP/IP ports that are associated with the old printer.
  11 Last but not least, I checked the other computers on my home network to see if any of these was located at the old printer and I removed these mappings, as the date of the spooling documents suggest it was printed in time once it has been deleted physically.

• want to create virtual hot spot WiFi

  Original title:

  virtual hotspot

  Hi, I have windows 7 home basic.i want to create virtual hot point for wifi but the program is not there.it is to windows 8. until he's I do? Please answer my question

  In fact, Windows 7 includes Microsoft virtual wifi miniport map - which can be used to create a "virtual hotspot.

  First of all, make sure that you have the current driver for your wireless card.  If you have a computer of 'brand', go to the computer manufacturer's web site, enter the information requested on your model and find the correct driver.  Download and install the driver if it is newer than the one currently installed.

  Then follow the directions here--> http://www.wikihow.com/Enable-a-Virtual-WiFi-in-Windows

• I do my job to the computer on a MAC computer. I want to create a document using Pages and then convert the document to PDF and send a group email. I want to send the PDF using the pdf for each receiver icon must click the icon to open t

  I do my job to the computer on a MAC book PRO. I want to create a document using Pages and then convert the document to PDF and send a group email. I want to send the PDF using the pdf for each receiver icon must click the icon to open the document. My problem is the document does not show the icon, but rather the document is already open. I spoke with 2 Apple. 'Experts' care and can help me. Can someone tell me what to do?

  It's a question of how the recipients e-mail programs deal with attachments. Many e-mail programs will open all the files they can handle, including files jpg and PDF, by default, and if the recipient has not changed that there is nothing you can do about it. The only solution is to the compress first, then it will be delivered as an attachment, allowing the recipient to decompress and open it.

• you want to create the white list. How to do?

  I want a white list, but cannot find a place for it. I see < block sender >, but I want to create a list < allow >. Thank you.

  From any of your address books, you can just whitelist people. Go to Hamburger-> Options-> account-> [account] settings-> junk e-mail settings, to enable adaptive junk mail for this account controls and check address books you want from a whitelisted addresses.

• I have a distribution list large email I want to create, BUT I don't necessarily want to put in my Contacts and all this My Contact list of people synchronized upward with my iPhone. Can I create a group without their input in my Contacts?

  I have a distribution list large email I want to create, BUT I don't necessarily want to put in my Contacts and all this My Contact list of people synchronized upward with my iPhone. Can I create a group without their input in my Contacts?

  You can create another account on your mac.

  You can open an account with mailchimp.

  There may be a limit on the number of emails you can send per day. No idea about the number, but I've heard as low as 200 per day.

  R

• I want to create a 2 cells in demand for numbers, the 1st cell is a dropdown menu with items of text, when choosing an item, that it would be represented by a numeric value in the other cell. How can I do?

  I want to create a 2 cells in demand for numbers, the 1st cell is a dropdown menu with items of text, when choosing an item, that it would be represented by a numeric value in the other cell. How can I do?

  You can use vlookup() like this:

  (1) crate a table like this:

  the first line is a heading row

  the first column contains the same list of items in the context menu

  the second column contains the corresponding values

  name of the table 'value '.

  

  In another table (where the pop-up menu), you can use the table of choice of 'Value' like this:

  

  create a drop-down list in cell B1

  Select cell C1 and type (or copy and paste) the formula:

  = VLOOKUP (B1, Value::A:B, 2, 0)

  short hand for this is:

  C1 = VLOOKUP (B1, Value::A:B, 2, 0)

  now change the pop-up to display the value in the change of cell C1

• I want to create new files every 2 seconds of "write in a measurement file.

  I am a beginner of LabVIEW; I want to create new files (with similar names like test_01.txt, test_02.txt...) to 2 seconds interval using "write to a measurement file.

  In fact, it should be a question. Join the program that you have problems with. The subject was discussed several times as you should have found examples when you did your research.

• I want to create a completely blank copper on a plane in copper.

  I want to create a completely blank copper on a plane in copper.

  / When I create a copper box and then select fill 'none' there is always a small ring of copper around the perimeter which I can't delete regardless of what settings I use.

  Hello

  There are two ways to do:

  (1) after having placed your aircraft in copper, put you on the layer 'keepin allowed/forbidden zone '.

  go it to 'Place' "Keepin-forbidden zone" and draw the shape you want.

  Then the area will be cut off from your plane.

  You can get errors in DRC with parts and titles in another layer.

  This can be avoided, but takes a lot of settings... so I never have that

  (2) instead of having a plan in copper, use copper areas to build your airplane.

  You might need to put two or more overlapping region,

  So just don't put any copper where you don't want everything.

  This solution is somewhat more difficult, but you get errors of DRC on other layers/parts

  Success!

• I want to create the user in the direct areas but I found thi message: the requested account name is already in use.

  Over the period of re - use the account in the domains.live

  I want to create the user in the direct areas but I found thi message

  The requested account name is already in use or has been used in the past and has not been through the waiting period required of re - use.

  Can you help me

  Hi, Ahmed.

  It seems that the domain name you have selected is not available (or has already been used and it is found that the previous owner of the domain has used the same user name as an account).  In any case we can not help you here.  You need help from domain.live.

  Please go to http://help.live.com/help.aspx?project=domains&market=en-us&querytype=keyword&query=SNIAMODTUOBA&tmt=&domain=domains.live.com&format=b1 and down, click on support and follow the prompts to get help.  Although it is technically to the implementation of the field, I'm sure that your application will be either still answered or they will direct you to the proper location for assistance.

  In addition, you can try http://windowslivehelp.com/product.aspx?productid=25 for help Windows Live Administration.  If you can not find help with solutions validated or by performing a search, try posting in the forums.  I suggest the following for the problem that you specified: http://windowslivehelp.com/forums.aspx?forumid=7e6f04c0-6a48-4719-98f4-a9729d34c76e.

  I hope this helps.

  Good luck!

• BGInfo warning cannot find the configuration file 'default.bgi' do you want to create a new file, do I?

  laptop, appears on the desktop whenever I log on windows

  Of course, it won't hurt anything.  BGInfo is a program that displays information about your computer in the background, when you start, and he wants to create its default settings file.  Let him and the message will disappear.