I want to display text on screen only, but does not when printed on paper. How do I do that?

Similar Questions

• My storm blackBerry smartphones comes on the screen upward, but does not show a picture!

  My storm blackberry 9530 recently fell to the ground, but nothing happened. But today its very slow and most of the time the screen turns on but does not display any image at all, just a black screen

  What can I do?

  Hi Mxgaudelli,

  Welcome to the BB Community Forum...

  There seems to be a hardware problem... have u tried a reboot of your BB battery pull, if you have not then try it once... If the problem persists, I recommend you to visit a centre of Service of BB and they have a quick glance at your question...

• I want to use the print SCREEN key, but does not work.

  Using Vista, I want to activate my key on my keyboard screenshot to capture what I have on my screen at the same time.  When I press it, nothing happens.  Is there something that I need to program to operate?

  You must stick somewhere after you press the button.

  http://www.SeoConsultants.com/Windows/print-screen/

  Often abbreviated Prt Scr, print screen key is a useful key supported by most of the PC. On the BACK, by pressing the print screen key causes the computer to send some images and text are currently on the screen to the printer. Some graphics programs and Windows, use the print screen button to get screenshots.

  Now, how to see the screenshots or maybe even send them to someone? The fastest and most effective method is to have a practical graphic editing program. If this isn't an option, you can open your favorite word processing program and create a new document. Place your cursorat the beginning of the document, or wherever you want the screenshot to appear.

  Using your keyboard, press Ctrl + V which will Paste the screenshot in your open document

  http://graphicssoft.about.com/cs/General/HT/winscreenshot.htm

  How to capture a screenshot of your desktop or window Active in Windows

  http://www.ibiblio.org/virtualcell/Tutor1/TandR/PrtScr.html

  http://www.ehow.com/how_4682072_use-print-screen-laptop.html

  How to use the print on your laptop screen

  See you soon.

  Mick Murphy - Microsoft partner

• Equium MX40-103 screens towers but does not power down

  I have the above model. The laptop works well except for the fact that the screen turns off but is still running.

  This can happen in 10 minutes or after hours, I can't find one any relationship with the problem.
  However, the laptop will beep once for a longer time, then twice for a shorter duration, then the screen turns off.

  This occurs when the computer is loaded up, is not when loading windows. Thanks for helping me

  Hello

  Have you tried updating the graphics card driver?
  What about your BIOS version? If the latest version is available on the Toshiba page that you could try to update. But be careful! Don't forget to use the good BIOS and use the right update procedure

  Anyway. I read somewhere on similar problems and it seems to be linked to the main Exchange of bad parameter between LCD and PCB.
  This can be caused by a damaged ROM chip on the LCD screen.
  But to be 100% sure, you will need to contact the service point.

• I can't open links as the screen flashes but does not allow a new intake open. It was very iffy for several weeks, but it happens more and more.

  It started several weeks ago, but now the frequency has increased to where I can't open a link in a new take. The screen flashes, but nothing happens. I've tried Google Chrome, and this problem does not occur in another browser, so I guess this isn't my CPU, or security software. I use Avast and Malware Malbytes. I won't change to Firefox! Help!

  You must do a little more troubleshooting to determine the cause; as explained in this section of this safe mode support page.

  https://support.Mozilla.org/en-us/KB/troubleshoot-Firefox-issues-using-safe-mode#w_the-problem-does-not-happen-in-safe-mode

  The problem does not occur in Mode safe

  If the problem does not occur in Mode without fail, it is likely due to an acceleration of the extension, theme or material.

  See Troubleshooting extensions and themes and problems of hardware acceleration to resolve common Firefox problems for solutions.

• Image used as background is larger than the screen resolution but does not fill the screen

  My laptop resolution is 1600 x 900, the image I want to put it under wall-paper is easily bigger than what is 1775 x 1235.   I understood the bars on each side, if the image was smaller than the resolution of my screen but the image is much larger.   Why then should I always get these black bars?

  Click with the right button on the desktop background and select Customize,

  Click the downstairs desktop background link on the left

  Use fill or adapt.

  

• Photo Gallery Windows keeps closing while the display or the setting of the photos. It is said that there may be a problem with the CODEC, but does not have an idea on how to correct or fix. Someone knows how to solve this problem, or what could be wrong?

  Ideas:

  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hello Susan4659,

  Thank you for your message.  Please see the link below, most likely you're trying to view photos taken with a camera that uses a specific format which is not standard with Photo Gallery.
  http://www.Microsoft.com/ProPhoto/downloads/codecs.aspx
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• When I import a gif animated in Windows Live Movie maker, the animation is displayed on the time line but does not play. How to use gifs animated in movie maker?

  I need help

  Windows Live Movie Maker does not support animated .gif files.

  The following article is maybe worth a visit:

  Windows Live Movie Maker - Animated GIFs

  http://papajohnvideo.WordPress.com/2009/09/23/animated-GIFs/

  If you have an older version of Movie Maker you can import the
  .gif to the file and save it as a .wmv file. Then use the .wmv in WLMM.

  And the free software IrfanView can extract the images of an animation
  file .gif and you can import them into WLMM individually.

  Open a .gif animated in IrfanView and go... Options / extract all
  Frames... Choose a destination directory, choose a format, left click
  the Start button.

• You want to display text in all the pages of the report.

  Hai,
  
  My report have lots of pages. And I want to display text (ex: report name) in all the pages of my RTF using BI-Publisher in word format. Please help me how to do the same.
  
  Thank you in advance.
  
  Kind regards
  Uraja

  create a header in rtf
  or
  create the template header and call it in the main model

• My dell optiplex 740 will not start. The screen is black, once it displays the Dell logo. It does not say that the computer is in mode 'sleep'.

  My dell optiplex 740 will not start.  The screen is black, once it displays the Dell logo.  It does not say that the computer is in mode 'sleep'.

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. You receive an error message?

  Method 1

  See the articles below and check if it helps.

  Computer stops responding with a black screen when you start Windows XP

  http://support.Microsoft.com/kb/314503

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

  http://support.Microsoft.com/kb/318027

  Method 2

  I suggest that you start the computer in the last good known Configuration mode and safe mode, post back with the result.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  How to start your computer by using last good known Windows XP Configuration

  http://support.Microsoft.com/kb/307852

  How to fix a computer that does not start

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start

  Method 3

  If the computer can boot in any mode, then I suggest that you perform the clean boot procedure and check if it helps.

  It is possible that some third-party programs installed on the computer is causing the problem.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• Any ideas how can I insert a pdf into word, by using the option object to insert. However, the pdf file that I want to insert text and annotated lines, but once inserted comments do not appear?  any help would be greatly appreciated.

  Any ideas how can I insert a pdf into word, by using the option object to insert. However, the pdf file that I want to insert text and annotated lines, but once inserted comments do not appear?  any help would be greatly appreciated.

  You will need to find a forum for MS Word, since it is the software you are trying to manipulate in the present.  If you think that the treatment/creation of the PDF file plays a role, then you should ask in the forum for the software that you use to create the PDF file.

  This forum is for a question about downloading and installing Adobe products test, so in all circumstances, your question does not fit in this forum.

• Acrobat Reader 9.2 does not view/print text in text fields

  Hello. I am a newbie of Acrobat using version 9.0 of test. My drive is 9.2.0. I'm having a problem. I cooked up a doc of forms using Acrobat 9 Pro.
  When displaying in the player, the text in my form field does not display unless I click on the field. If I click on a different field the text for that field and disappear from the field, I was at previously. Acrobat Reader 9. Reader says I can enter data and save the file.
  When I print with Reader 9, the text does not print. I use the trial version and try to work using only the online help which is not so easy to do being a newbie to the PDF Editor :-(.  I have included the original file and a couple of the capture screen.  What I'm trying to do seems to be pretty basic.
  If I'm missing something in the documentation, please point me to it.  I saw similar posts in the forum but with no resolution. Thank you
  Jake

  P.S. attached are three files:
  Pdf file of forms
  Screenshot of the form file after openeing in reader (no text displayed.jpg)

  Screenshot of the file after clicking on the text field (text displayed after clicking on text field.jpg)

  Assign a font for the text fields.

• I want to use my camcorder panasonic SC-with v720 good hdmi as a webcam how do I do that

  Subject: I want to use my camcorder panasonic SC-with v720 good hdmi as a webcam how do I do that

  I was looking for a good webcam (video camera) that I can use to spread my webinars.

  I can't find on the website of apple that works well with my macbook so I can use it in quicktime, Skype, facetime, google den, jam Webinar, goto webinar etc.

  If you know that a good webcam please let me know.

  Then I found an article on the internet how to use your own video camera as a webcam.

  But you must have some sort of converter video thunderbolt Blackmagic Design UltraStudio datalogger of 150 dollars.

  I don't understand that, my camcorder has my mac book has hdmi hdmi why isn't is possible to connect them so that I can use my camcorder as a webcam.

  My panasonic SC-720v is also compatible with imovie.

  Please who can help out me.

  Greetings

  Conrad

  The Netherlands.

  By the present the link which connect a video camera with the crush blabla UltraStudio recorder of Blackmagic Design Mini converter

  https://Ozar.me/2014/03/using-HD-camcorder-Mac-webcam/

  I think that the HDMI on your Air port was released only to screen external which is why you need the converter.

• First Watch a unexplained file to open a project dialog box but does not say what he wants or case?  Really?

  It is a common phenomenon: I opened a project in first, and instead of the interface user of first, I see a file dialog box.  Apparently first is looking for a file, since there is an option for "display only exact name match.»

  But corresponds with what?  Is nowhere on the screen there a file name, or anything to tell me first seeks.  Isn't this monumentally stupid?

  And so forth, over and over again for each file first can not find.  Your only viable solution is to hit "Skip All", since you are never given a file name.

  Once the project is in place, you can browse your timelines for any red video event.  And when you do a right-click on one of them to view its properties, first show you often inexplicably the name of an audio file.  Sometimes, you see the name of a video file.  But what is missing here, Adobe?  THE path.  You get the name of the file and nothing else.  You have still no idea where first expected to find the file, so you have no way of troubleshooting of his disappearance.

  And I thought the dialogue of media-reissue of old FCP links was bad.  Is there a solution for this?  What is the workflow expected here?

  Thank you!

  Looks like you're on Mac El Capitan (OS 10.11.x), is that correct? If Yes, some dialogs changed with 10.11 Mac and affected dialog boxes are more display the title bar, which is where this information is displayed (this affects a number of applications, not just the first one). Is a question that is being investigated because he was not a problem on Mac OS 10.10.x.

  Since CS6, it has improved to the Media link dialog box (as seen in the screenshot by shooternz).

• Clicking on menus in Muse causes screen to flicker, does not allow access

  Updated to 2014 Muse, running Windows 8.1

  By clicking on the part of the menu text font, the screen flashes and does not allow me to change the font.

  In addition, after you create a rectangle and you attempt to add a hyperlink, click the hyperlink box, causes the screen doesn't Flash and does not allow access to the text box.  A lot of similar problems and Muse is now unusable.  No other problems with far adobe products (Photoshop works very well)

  The menus seem not to be the right size because I can't see all the text in their breast.  It's like they're waiting for my monitor at a higher resolution, (change the resolution does not help)

  I tried to uninstall and reinstall.  I removed the previous version completely.  I rebooted several times.

  Help!  (Please)

  Thank you all.

  Derrick

  Go to control panel of configuration and the value Display zoom 100% or 150%. The release of 2014 of Muse is not compatible with how Windows 8 and 8.1 reach 125% zoom.