I want to do a cleanup/consolidation/archiving of files - Organizer will always keep the data of the catalogue?

Similar Questions

• Mediathek photo: A way to keep the Photos on Photos.app when you want to remove them on the iPhone?

  I understand the concept of the Mediathek Photo.

  The goal is to keep the Photos on different places for example iPhone, iCloud and synchronized Macbook.

  Automatically.

  Because the volume of data on my iPhone is not very large, sometimes I have to delete the photos.

  Is it possible to prevent these pictures from beeing deleted on the Macbook?

  Or do I have to completely give up the automatic transfer of photos only?

  In my mind, I think of a kind of function of archive for Photos.app.

  A flag that prevents pictures archived the synchronization beeing part.

  Can you give me an opinion please?

  Thank you.

  Because the volume of data on my iPhone is not very large, sometimes I have to delete the photos.

  Is it possible to prevent these pictures from beeing deleted on the Macbook?

  Photo library of iCloud will synchronize the full library of Photos.   If you remove a photo from the library on a device, it will be removed from all libraries in snced on other devices.

  One way to synchronize on a selective basis would be to have more than one library of Photos on the MacBook. A library of synchronization iCloud Wavec with only the photos you want on your iPhone.  And a library with other photos that you don't want in iCloud.  See this help page on the use of several libraries: https://help.apple.com/photos/mac/1.0/?lang=en#/pht6d60b524

  Another approach would be to use "Optimize storage" on the iPhone.  Then the photos will be optimized smaller photos on the iPhone store and more pictures will be fit.

• OE6 compacting emails, three months have disappeared. How to open the archive.pst file?

  Using Windows XP and OE6. I want to open the folder to archive and get the messages back to my Inbox.

  Not use Outlook Express dbx, pst files.
   
   
  Two reasons the most common for what you describe is disruption of the compacting process, (never touch anything until it's finished), or bloated folders. More about that below.
   
  Why OE insists on compacting folders when I close it? :
  http://www.insideoe.com/FAQs/why.htm#compact
   
  Why mail disappears:
  http://www.insideoe.com/problems/bugs.htm#mailgone
   
  Recovery methods:
   
  If you are running XP/SP3, then you should have a backup of your dbx files in the Recycle Bin (or possibly the message store), copied as bak files.
   
  To restore a folder bak on the message store folder, first find the location of the message store.
   
  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.
   
  In Windows XP, the .dbx files are by default marked as hidden. To view these files in the Solution Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder options | View.
   
  Close OE and in Windows Explorer, click on the dbx to the file missing or empty file, then drag it to the desktop. It can be deleted later once you have successfully restored the bak file. Minimize the message store.
   
  Open OE and, if the folder is missing, create a folder with the * exact * same name as the bak file you want to restore but without the .bak. For example: If the file is Saved.bak, the new folder should be named saved. Open the new folder, and then close OE. If the folder is there, but just empty, continue to the next step.
   
  First of all, check if there is a bak file already in the message. If there is, and you have removed the dbx file, go ahead and rename it in dbx.
   
  If it is not already in the message, open the trash and do a right-click on the file bak for the folder in question and click on restore. Open the message store up and replace the .bak by .dbx file extension. Close the message store and open OE. Messages must be in the folder.
   
  If messages are restored successfully, you can go ahead and delete the old dbx file that you moved to the desktop.
   
  If you have not then bak copies of your dbx files in the Recycle Bin:
   
  DBXpress run in extract disc Mode is the best chance to recover messages:
  http://www.oehelp.com/DBXpress/default.aspx
   
  And see:
  http://www.oehelp.com/OETips.aspx#4
   
  A general warning to help avoid this in the future:
   
  Do not archive mail in default OE folders. They finally are damaged. Create your own folders defined by the user for mail storage and move your mail to them. Empty the deleted items folder regularly. Keep user created folders under 300 MB, and also empty as is possible to default folders.
   
  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  
  http://www.oehelp.com/OETips.aspx#3 
   
  And backup often.
   
  Outlook Express Quick Backup (OEQB Freeware)
  http://www.oehelp.com/OEBackup/default.aspx  

• Under XP, while doing a disk cleanup, get a message "files required for windows runs properly have been replaced by unrecognized versions.

  While doing a disk cleanup, I received a message "files which are required for windows to run properly have been replaced by unrecognized versions.» To maintain system stability, Windows must restore the original versions of these files. Insert your CD-ROM in Windows XP Home Edition now. "and I did not... I can restore it online?

  * original title - windows file protection *.

  Maybe someday the dialog box 'ask a question' forums XP will ask these questions automatically when a new thread is started so I don't have to ask every time.  It might even be possible to solve a problem in a single response when enough information is provided.

  Please provide additional information on your system:

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  If you have a genuine XP installation CD bootable which corresponds to your currently installed Service Pack, you won't get away with instructions to run sfc/scannow.

  Windows file protection wants to replace a file of the backup copy he keeps in the dllcache folder and WFP found that the backup copy of the file on your system is not look right, so he complains (there is a list of 3498 files PAM knows).

  When you see the original message, if you click Cancel, then choose 'keep' the file afflicted, you will see a warning message, and then a message like this in the case where the system log viewer:

  Event type: Information
  Event source: Windows File Protection
  Event category: no
  Event ID: 64005
  Description:
  The protected system file taskmgr.exe had not been restored in its original, valid version because the Windows File Protection restoration process was cancelled by user interaction, user name is Jose.  The file version of the bad file is unknown.

  As you can see, the file that WFP is concerned is clearly stated in the paper, so now you know what is the file.

  For the above example, I used my (taskmgr.exe) Task Manager file to reproduce the problem.  You need to see what your event viewer message says.

  When you know what the file is, you can decide what to do about it.  There are probably other copies of the files on your system, or you can get the files from another source.

  A shortcut to the event viewer is to click on start, run and enter in the box:

  eventvwr.msc

  Click OK to launch the event viewer.

  Check your event observer system log and look for a proposed Windows file protection event.

  If you double-click on an event, it will open a window of properties with more information.  On the right are black up and down arrow keys to scroll through the open events. The third button that looks like two overlapping pages is used to copy the details of the event in your Windows Clipboard.

  When you find an interesting event that occurred at the time of your question, click on the third button at the top and arrows to copy the details and then you can paste the details (right click, paste or CTRL-V) the text in detail here for analysis.  Remove personal information from your information
  After having stuck if you are forced to do so.

  Do, or do not. There is no test.

  I decided to implement the points for a new puppy instead of a pony!

• What files can I delete during the disk cleanup?

  Cleaning disc in Windows 7 wonder tick boxes to indicate which files I want deleted.  I want all the boxes or is there some files I need to keep?

  All about disk cleanup...
   
  http://www.theeldergeek.com/disk_cleanup_utility.htm

  -Mike Hall MVP Windows: consumer http://msmvps.com/blogs/mikehall/ Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/

• How to make consolidation operator (~) instead of (+) by placing it in the rules of the load.

  Because by default it will make my child (+) values after build in the cube. I don't want one by one change the operator of consolidation in the values of the child to (~) in the outline. It must therefore be made in the rules of the load. For your information, for my build parameter dimension, I have defined this reference generation and in the dimension of the generation properties, I put as a generation like the field and field number 2. I can't find the setting to make all my child operator of consolidation so that it takes (~) in the rules of the load. Thank you

  What I have in my .txt file. that is open in the loading rules that have columns.

  Value1

  Value2

  Value3

  What I did after having built the loading rules in the cube.

  Stored MyDimensionName # Default # (3)

  Value1 (+)

  Value2 (+)

  Value3 (+)

  What I want to achieve.

  Stored MyDimensionName # Default # (3)

  Value1 (~)

  Value2 (~)

  Value3 (~)

  Hello, I did it before I saw your reply. I add a first column to help to create a field using text, and I type in ~. So total I now have two columns

  Field1 Field2

  Value1 ~.

  Value2 ~.

  Value3 ~.

  After that, for my dimension build setting, I put it as a reference of generation. In the generation of dimension properties, I put it Field1 as generation for the field and field2 as a property for the field. I have set as number2 Field1 and field2 as number2. I need to change my stored MyDimensionName # Default # (3) stored MyDimensionName # Default # (3) (Label only) If no, it will not work. That's how I did it. Haven yet tried your method. That means that u create using a field using text that is gen1 for column1, and ~ to Column3? In total it is therefore 3 columns?

• Purge logs archiving on things primary and Standby and for Data Guard RMAN

  
  Hi, I saw a couple of orders in regard to the purge archive records in a Data Guard configuration.

  Set UP the STRATEGY of SUPPRESSION of ARCHIVE to SHIPPED to All RELIEF;

  Set UP the STRATEGY of ARCHIVELOG DELETION to APPLIED on All RELIEF;

  Q1. The above only removes logs archiving to the primary or primary and Standby?

  Q2. If deletions above archive logs on the primary, is it really remove them (immediately) or does the FRA to delete if space is needed?

  I also saw

  CONFIGURE ARCHIVELOG DELETION POLICY TO SAVED;

  Q3. That what precedes, and once again it is something that you re primary side?

  I saw the following advice in the manual of Concepts of data protection & Admin

  Configure the DB_UNIQUE_NAME in RMAN for each database (primary and Standby) so RMAN can connect remotely to him

  Q4. Why would I want my primary ro connect to the RMAN Repository (I use the local control file) of the standby? (is this for me to say define RMAN configuration settings in the Standby) manual

  Q5. Should I only work with the RMAN Repository on the primary or should I be also in things in the deposits of RMAN (i.e. control files) of the standby?

  Q6. If I am (usually mounted but not open) Physics, of standby I able to connect to its own local repository for RMAN (i.e. control based on files) while sleep mode is just mounted?

  Q7. Similiarly if I have an old lofgical (i.e. effectively read-only), to even connect to the local RMAN Repository of Eve?

  Q8. What is the most common way to schedule a RMAN backup to such an environment? example cron, planner of the OEM, DBMS_SCHEDULER? MY instinct is cron script as Planner OEM requires running the OEM service and DBMS_SCHEDULER requires the data runs?

  Any idea greatly appreciated,

  Jim

  The above only removes logs archiving to the primary or primary and Standby?

  When CONFIGURE you a deletion policy, the configuration applies to all destinations archive

  including the flash recovery area. BACKUP - ENTRY DELETE and DELETE - ARCHIVELOG obey this configuration, like the flash recovery area.

  You can also CONFIGURE an archived redo log political suppression that newspapers are eligible for deletion only after being applied to or transferred to database backup destinations.

  If deletions above archive logs on the primary, is it really remove them (immediately) or does the FRA to delete if space is needed?

  Its a configuration, it will not erase by itself.

  If you want to use FRA for the automatic removal of the archivelogs on a database of physical before you do this:

  1. make sure that DB_RECOVERY_FILE_DEST is set to FRA - view parameter DB_RECOVERY_FILE_DEST - and - setting DB_RECOVERY_FILE_DEST_SIZE

  2. do you have political RMAN primary and Standby set - CONFIGURE ARCHIVELOG DELETION POLICY to APPLY ON ALL STANDBY;

  If you want to keep archives more you can control how long keep logs by adjusting the size of the FRA

  Great example:

  http://emrebaransel.blogspot.com/2009/03/delete-applied-archivelogs-on-standby.html

  All Oracle is worth a peek here:

  http://emrebaransel.blogspot.com/

  That what precedes, and once again it is something that you re primary side?

  I would never use it. I always had it put it this way:

  CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON ALL STANDBY;

  I would use only 'BACKED UP' for the data protection system. Usually it tell oracle how many times to back up before removing.

  Why would I want my primary ro connect to the RMAN Repository?

  Because if you break down, you want to be able to backup there, too.

  Also if it remains idle for awhile you want.

  Should I only work with the RMAN Repository on the primary or should I be also in things in the deposits of RMAN (i.e. control files) of the standby?

  Always use a database of catalog RMAN with Data Guard.

  If I am (usually mounted but not open) Physics, of standby I able to connect to its own local repository for RMAN (i.e. control based on files) while sleep mode is just mounted?

  Same answer as 5, use a catalog database.

  Similiarly if I have an old lofgical (i.e. effectively read-only), to even connect to the local RMAN Repository of Eve?

  Same answer as 5, use a catalog database.

  What is the most common way to schedule a RMAN backup to such an environment? example cron, planner of the OEM, DBMS_SCHEDULER? MY instinct is cron script as Planner OEM requires running the OEM service and DBMS_SCHEDULER requires the data runs?

  I think cron is still, but they all work. I like cron because the database has a problem at work always reports its results.

  Best regards

  mseberg

  Summary

  Always use a database with RMAN catalog.

  Always use CRF with RMAN.

  Always set the deletion «To APPLY ON ALL STANDBY» policy

  DB_RECOVERY_FILE_DEST_SIZE determines how long to keep the archives with this configuration.

  Post edited by: mseberg

• Arc1: 19504 error creating archive log file... after the NFS configuration

  I use an Oracle 11.2.0.3 on RHEL 5.7 (no ASM or RAC) database
  
  We have our archiving logs off copied to a backup location external via a cron job and rsync command, and I want to switch to NFS.
  

  NAME                         TYPE      VALUE
  ------------------------------------ ----------- ------------------------------
  log_archive_format               string      RCAT_%t_%s_%r.arc
  log_archive_dest_1               string      location=USE_DB_RECOVERY_FILE_DEST
  
  SQL> !df -h
  Filesystem                 Size  Used Avail Use% Mounted on
  ...
  ...
  backups:/ARCHLOG/rman       12T  7.8T  3.5T  70% /mnt/nfs_archlog
  
  SQL> alter system set log_archive_dest_2='LOCATION=/mnt/nfs_archlog optional' scope=both;
  
  System altered.

  When I run 'alter system archive log current', I see the error message archiver in the alert below log...
  

  Wed Aug 29 14:42:08 2012
  ALTER SYSTEM ARCHIVE LOG
  Wed Aug 29 14:42:08 2012
  Thread 1 advanced to log sequence 23044 (LGWR switch)
    Current log# 4 seq# 23044 mem# 0: /u01/oradata/RCAT/redo_4a.dbf
    Current log# 4 seq# 23044 mem# 1: /u02/oradata/RCAT/redo_4b.dbf
  Wed Aug 29 14:42:14 2012
  ARC1: Error 19504 Creating archive log file to '/mnt/nfs_archlog/RCAT_1_23043_602355789.arc'
  Archived Log entry 24282 added for thread 1 sequence 23043 ID 0x165341cd dest 1:

  However, when I check the NFS location I see that the file is there.

  [oracle@rman nfs_archlog]$ ls -la
  total 72
  drwxr-x--- 14 oracle oinstall   4096 Aug 29 14:42 .
  drwxr-xr-x  3 root   root       4096 Aug 29 14:16 ..
  -rw-r-----  1 oracle oinstall 204288 Aug 29 14:42 RCAT_1_23043_602355789.arc

  On the NFS host, I see

  [root@backups archivelog]# ls -la
  total 68
  drwxr-x---. 14 500 500   4096 Aug 29 14:42 .
  drwxrwxr--.  3 500 500   4096 May  8 13:54 ..
  -rw-r-----.  1 500 500 204288 Aug 29 14:42 RCAT_1_23043_602355789.arc

  The/etc/exports on NFS host has the permissions set to read/write, no_root_squash.
  
  Is there something obvious that I'm missing?

  the folder is created by newspaper archive must have atleat authorisation from 770.

• Archive log deletion with no backup of the archive logs

  I suffer from enormous size archive of the newspaper. In my previous post, I asked for help. I almost 480 GB archive log every day in our database of 11 2 under redhat linux 5.8 GR. Now, if you please help me in another case.
  
  If I take backup of archive logs and run delete archivelog everything until ' sysdate-1' with each backup database of day how it affects. " In my opinion there should be no problem in that I have the last incremental backup and recovery 1 days archive log in archivelog destination. If I do not archive log backups to how it will be different. Help, please.

  >

  Hello

  Sir, I know how to remove. But in my opinion delete up to sysdate-1 and taking no backup of the Archives of newspapers will
  no effect. Is in my opinion is right or wrong, that is the question.

  What I read in your original post, is that you take a daily incremental backup - Yes? I'm assuming that you also take
  a full backup on a regular basis (Sunday?).

  I was working on the assumption that the foregoing is available? I worked on a project where installation has been similar. We
  tested regularly backups - I hope that you do the same thing?

  What we used to do was FTP (script Unix - cron job - if you Google you will find Python or Perl to do the same thing - that is)
  what I wanted to, but was cancelled - very 1980, anyway) the archived redo logs on to a specific computer that holds only these files.
  After FTP "d - they have been removed from the server, freeing up space.

  Now, you say you have TB 0.5 per day - while more than a week, you will need a machine with ~ 3 TB of disk - if you can get a kind
  the scenario as this place and running, then you will have both your incremental backup and your archived redo logs for the last
  24 hours and the full backup with recovery archived records dating back to this full backup. You can also always archive on tape if
  suits. So, you will have redundant coverage - 'belt and braces' as the Americans say.

  But, to answer your question directly, "take no backup of archive logs have no effect" - that is true - it
  will not affect the operation of the database server, but if I were you, I would hang on to enough archived redo log to return to the
  last backup. That's just my humble OPINION.

  HTH,

  Paul...

  Published by: Paulie July 21, 2012 19:28

• RMAN-20242: specification does not match any newspaper archive in the catalogue

  Dear Experts,
  My rman script is as follows:
  4 > run
  5 > {}
  6 > allocate channel dev1 "Z:\Rbackup\DMP\db_t%t_s%s_p%p" type disc format
  7 > affect the format of disc type channel dev2 'Z:\Rbackup\DMP\db_t%t_s%s_p%p ';
  8 > backup database FILESPERSET 20;
  9 > archivelog backup until time ' sysdate-1' remove all entries;
  10 > release channel dev1;
  11 > output channel dev2.
  {12 >}
  
  The above script is executed every day at 14:00.
  Today accidentally I ran this script twice. The second round, wiped out the created first dmp. Indeed, I've lost the newspaper archive of sysdate-2 to sysdate-1. After that, I did a full backup.
  Now, if I have a full back, I lost 1 days newspaper Archives.
  Please tell me what are the consequences of this?
  
  Concerning
  Renjith Malet

  Renjith Madhavan wrote:

  if already backed up and those archives not exist in OS.... there is no worries on business requirements..because it is already in RMAN repositry
  

  What happens if I want to perform a recovery until a specified... time? Can't be a requirement of the company?

  Published by: Renjith Malet 5 December 2010 21:52

  If you want to perform incomplete recovery until the specified time (time base), then in this case, you must be have full backup taken before this time and backup all archivelogs this time full until your desired time.

• How can I replace the mime types of server, always get the mp3, rar, sid, bin files directly in the dialog box "where do you want to save this file?"

  I used to be able to click on MP3 files, the way back when, and Firefox asks where I wanted to save. Nowadays, it opens a new tab with a flash drive.
  By clicking on the "unknown" files, like .sid, .prg, .zip, .rar is ' this is a BIN file. [Cancel] [Save] ». It does not give me a check box for "always do this".
  I would like that option to edit so that certain types of files, such as PDF, regardless of mimetype, always get opened in a new tab if you click. Also some types of files, based on the extension, always go directly to the dialog box "Where you want to save the file?", without worrying if there is a viewer or a builtin player or not. In my Firefox (41.0.1 14.04LTS 32-bit Ubuntu) I have never the choice "do this for these files always" more.
  Googling led me to delete my file mimeTypes.rdf and since file extensions can even "well known", such as .zip, are treated as BIN files and I get the box Cancel-or-Save for those too - again without the choice of "always save the BIN files.

  These files are send as Content-Type: application/octet-stream and Content-Disposition: attachment;
  To send files in this way, you cannot save an automatic action.
  You can see that in network monitor.

  • https://developer.Mozilla.org/Tools/Network_Monitor

  Content-Disposition: attachment; filename="TURRICAN_AMIGA_PORT.sid";
  Content-Type: application/octet-stream
  

• Downloading a file, application/octet-stream mime type, I always get the dialog box "do you want to save to save this file?" Cancel or save.

  A number of us use a private site where run us an application in offline mode. The application offers a download button so that we can take a snapshot of our progress in offline mode, a sort of backup. When we'll be back online you can either download the information from the application or we can load the backup files.

  The problem is that every time we hit the download button, we always get the additional dialog box asking if we want to save or cancel the download of the file. It may sound a little silly, but we really do not want to have to move the mouse to the new dialog box and click on the "Save" button.

  The mime type of the file is application/octet-stream, there is no file extension.

  Is there a way to change the configuration of Firefox so that this dialog box does not appear?

  Thank you.

  My apologies, but I deleted all system information collected automatically because I am not in a position to submit this application for machines where the problem occurs.

  These system are:
  14:04.3 Ubuntu LTS
  Firefox 40.0.3

  Content of type "application/octet-stream" will cause always Firefox show the 'open with' Download dialogue.
  To avoid this download, you must configure the server to send another type of content and possibly change the file extension.

  • https://developer.Mozilla.org/Properly_Configuring_Server_MIME_Types
  • https://developer.Mozilla.org/How_Mozilla_determines_MIME_Types

• When you type a query in the bar always double the third letter, for example, research, if I want to write a 'youtube' written "youutube" what to do, help

  When you type a query in the bar always double the third letter, for example, research, if I want to write a 'youtube' written "youutube" what to do, help

  Hello chilli.willi, try Firefox Safe Mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click the menu button

    

    click Help

    

    then select restart with disabled modules.

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• I use google search. When I click on a suggestion contained in the results tab of the search, I want it to open in a new tab and keep the search results in the original tab. How?

  For example, when I enter the search term "cabinets" and get a page/tab search results with suggestions such as Sears, JCPenney, or Amazon, I want to be able to click on Sears and open the Sears page in a new tab/page. I want to be able to close the tab to Sears and use the search results tab.

  Google offers a framework for this. What it does, it adds a HTML (target = "blank") statement to every result link, which causes Firefox to open in a new tab. If you uncheck the preference to divert new windows in new tabs, Firefox will then open the result in a new separate window.

  This preference is stored in a cookie, if you clear your Google cookies often, so you'll need to reset every time. You can do so here:

  https://www.Google.com/preferences

  (On this page, Google refers to a new window.)

• I want to open a new tab, but keep the cursor in the adressbar. Right not every time I open a new tab, I come to a page with google search and the firefox logo.

  Everytime I open a new tab, I'm greeted by this page

  http://blog.Mozilla.org/UX/files/2012/05/Firefox-beta-13-redesigned-About_Home-Page1.PNG?128c42

  Is a small problem for me, because when I want the cursor at the beginning in the adressbar. So, if for example, I opened a new page, I type in imdb.com I receive directly on imdb.

  Today, however, with the Home tab firefox screen. I have to do a google search for imdb.

  A small problem perhaps, but enough to be annoying.

  Is there a way to move the settings or something similar, and keep the cursor in the address bar after you open a new tab?

  Hello

  If you only want the new tabs do not have home page, you can change it by going in your Subject: config page and replacing "browser.newtab.url" Subject: vacuum. For me at least, if I open a new tab on a white page, the cursor remains the address bar.

  In order to change your Firefox Configuration please follow the following steps:

  1. In the address bar, type Subject: config

  and press enter. The subject: config "this might void your warranty!" warning page may appear.

  1. Click on I'll be careful, I promise! to keep the comments: config page.

  If you also want to change your home page to a blank page, you can do so in virtue:

  • (on Windows) Tools > Options > general, or
  • Menu

    

    > Options (preferences on Mac and Linux) > general

  Then change the dropdown to "when Firefox starts:"so that it is set to 'Show a blank page'.»

  Note that you can continue to do research on the awesome bar and search bar where you want to do a Google search.

  Does this solve the problem? Let us know.