I want to make a bluray with different frame rates, 23.976 and 25 frames per second.

Similar Questions

• Problems with 24 frames per second in final cut Pro7

  Capture of the source - Canon 70 d - PAL - 1080/24 VPS

  Apple Pro Res-converted and imported in FCP7

  Clip fell in a sequence and choose 'change sequence with clip parameters.

  Sequence is then 23.98 FPS (NTSC friendly) rather than 24 p

  Ask yourself if this is the reason why the audio goes slightly out of sync with separate Zoom audio recording (never had this problem in the choice of the sizes of 25 or 50 on the camera)

  In addition, not a huge problem, but PAL DVDSP project sees the video as NTSC conversion to Mpeg Compressor 3 - only option to choose 25 fps to keep the project as PAL (that I have to keep the project as PAL)

  Also I was wondering if Final Cut X includes a setting sequence for 24 fps instead of 23.98

  24 fps straight up is very rare. Only used for feature films and cameras of late superior (such as RED).  24 p video works at 23.98.  The cameras of Canon should really default 23.98 during the filming of 24 p.  I can't even see a right setting 24 fps.

  What also confuses me is "PAL 24 fps." PAL is not 24 fps... 25 fps and 50 fps PAL frame rates. Watch raw H.264 launches... and the camera open in QT and see what the pace. He he 24 fps?  Even deposit directly into FCP and see what says the pace.  Just to see what the pace... FCP can show a lot. And as said FCP is the pace of the film converted?

• It's going to be another canon 7 d with ten frames per second?

  I'm about to buy another one. I thought a seven d. I was told to wait because canon replaces the d seven with a newer 7 d is true?

  Rumor is that it will be only a 7 d Mk II published some time in 2013. There is no official announcement from Canon, and there is only speculation of the specifications list.

  If I had to guess, it will have a price tag of $2000-$2200.

  I'd probably buy a 7 d now because the price is very good and by the time of a 7 d Mk II gets actually released, it could be Christmas.

• It's my first Siu of this system, so I want to make some friends from different countries, how do?

  Original title: help

  It's my first Siu of this system, so I want to make some friends from different countries, how do?

  Hi hangfenge,

  The purpose of these forums to answer is to help people having problems with their computers and the various products we cover here - it is not a place for personal conversations in order to make friends.

  To do this, I would say something like Facebook: http://www.facebook.com/ or among the multitude of alll chat rooms available on the web.  Here's a search that can help you find a: http://www.bing.com/search?q=chat%20rooms%20online&PQ=chat%20rooms&SP=2&QS=AS&SK=AS1&sc=8-10&form=BB07SS&pc=BB07.

  If you have problems with your computer or software, can find here appropriate forum and ask your question and someone will be happy to help you.

  I hope this helps.

  Good luck!

• acquisition of data with different sampling rates high

  I have a few questions on the use of the OMB-DAQ-3005 with different sampling rates high.

  For our application, we have 8 analog inputs. Which two are a quick response and should be sampled frequently.  We have an encoder quadrature (CPR 1000 running at 1800 rpm).  We plan to sample X 4 encoder.  For the analog inputs for the quick response, we want to trigger a sample of each pulse or each a few pulses, thus creating a timestamp with the position of the encoder with respect to position index as well as two fast analog inputs.  We have data correlating the analog inputs with the position of the encoder.   Other analog inputs, we want to measure relatively slowly (for example once every 5 dry or similar).

  How can I go on the configuration of the two (or more) sampling rates different wherein I can taste entered at different frequencies?  Also, is there a way to reset the encoder count after outbreak of the index as I have the position of the encoder with respect to the index?

  Maybe you'll find someone here who uses the OMB-DAQ-3005, but this forum is really more designed for LabVIEW programming issues.

  I've never used the OMB-DAQ-3005, but out of curiosity, I took a glance at the Manual of OMB-DAQ-3005.  The answer to both your questions are:

  1. you cannot run a hardware DQA Multiplex (like this one) at independent rates by channel.

  2. the OMB-DAQ-3005 supports an Index Z feature to reset the counter - look for documentation on how to configure any software interface you are using.  If you get stuck, you can try to discover media appropriate for instrument channel.

  Best regards

• I want to make a CD with the picture of my brother in the order of his life.

  My brother just died. I want to make a cd of photos of him in the order when he was a baby, and through his life. I have created a folder for this and entered the order the photos I wish, but as I put the pictures in, file fix them out of use. How to display in the order and also to go on the cd and to display in the order?

  It seems that this could be the right answer. The only question I have is that several times I tried to rename the files and a message came to say he could make my unstable file, so I've renamed never all., because I didn't want to spoil my pictures.

  In addition, can I keep the image names and add numbers before or after the title... I'll make the cd for other people to view, and it will cover a period of 70 years. I wish that people who consult to understand on what date, and perhaps where they were taken.

  Thank you for your information, I appreciate it

  =======================================================
  The dialog box that you received when you rename was probably something like...

  "If you change the file name extension may become unusable.

  "Are you sure you want to change it?

  This dialog box if you are unable to keep the file extension that indicates
  the format of the file. For example. JPG and even if rename you it with a.
  the extension you could replace it and the file would be nice.

  If you do not see the file extensions on your file names... you can go
  TO... Button start / Control Panel / folder Options / View tab and Clear
  (uncheck)..., the checkbox "Hide extensions of known file types" / apply / OK.

  If you have reservations about your photos, that it may be interesting to try
  create a copy of the file of the photo to experiment project. So if
  you are not happy with the result rename you can just delete it
  and while maintaining the current photo project folder.

  As for retaining the current file names. Yes, you can keep them if you
  numbers of the photos manually and place the first number. Do not close the
  file once you have manually converted files or they will come back
  for the original order. After that your numbering is done... they will remain in
  order.

  As follows:

  10001 dinner with friends.jpg
  10002 to the beach.jpg
  Picnic 10003 time.jpg
  10004 ocean waves.jpg

  Good luck...

• I want to make a donation, but not to give my name and address

  I want to make a donation, but you askoing for my name, address, etc. I don't distribute these unless there is a direct need (deliveries, etc.). I can not just give? I have an account of Firefox and I am connected.

  Thank you

  Nick

  Try using askjoin [at]mozilla.org as indicated on the FAQ page.

  Sorry, most of us is voluntary and is not directly involved with the donation procedures.

  I imagine that, unless you use some sort of secure terminal and are present in person the number of transactions; or postal donations require the address of the cardholder for security reasons. Otherwise perhaps fraudsters could clone and use your card or change the billing address without realizing you it.

• How to make a picture with my webcam to use facebook and other Web sites

  Please tell me how to take pictures with my webcam [toshiba laptop sateliteL755] and keep them to use sites like FACEBOOK, SKYPE soceal media!

  Contact support staff who made the webcam.

• How to extract the same song, several times using different bit rates or formats and store all the digital music files in WMP 12 default on the same HDD music library

  Using Windows Media Player 12 (w/under Windows 7), "can I ripping the same song, several times, using different bitrates & and/or formats and store all the digital music files in the music library by default WMP - 12, on the same hard drive?

  1.) #1 goal: tear up the same song repeatedly, w / "different rates" as a WMA file.

  2.) #2 goal: tear up the same song repeatedly, w / "different rates" as an mp3 file.

  3.) #3 objective: NOT to each subsequent copy (version) of the song, deleted & and/or replaced by the previous version of the song [even].

  4.) question Bottom Line Up Front--> is Windows Media Player 12 (included with the Windows 7 operating system) are able to achieve '#1 objectives; #2; & #3 above?

  5.) details/example: I want to tear the piece "Maria Maria by Carlos Santana" to my laptop as a Windows Media Audio [WMA] file.  In addition, I would like to rip the song 'Maria Maria' three several times with 3 different bitrates in format WMA; and, as an MP3 file.  Therefore, my final result wished (after the extraction process), will take place the four 4 audio files split up as follows: (a) 'Maria Maria by Carlos Santana'--> Format: file WMA; Ripped @128 Kbps bitrate.  (b) ' Maria Maria by Carlos Santana'--> Format: file WMA; Ripped to the "Variable bit rate; (c) ' Maria Maria by Carlos Santana'--> Format: file WMA; Ripped commissioning "Lossless." and (d). 'Maria Maria by Carlos Santana'--> Format: MP3 file. Ripped @256 Kbps bitrate.

  6.) my preference: I do NOT want to rename the file (s). {for example, 'Maria Maria by Carlos Santana' renamed/changed for--> "Maria_Maria_by_Carlos_Santana_128kbps.wma",...} 'Maria_Maria_by_Carlos_Santana_256kbps.mp3 '; etc.}.  In addition, I am not concerned about the additional disk space that will be consumed after multiple copies of the same song with different speeds of transmission and different formats.

  7.) my experience w / Windows Media Player 10 (w / the operating system of Windows XP): using WMP - 10, my goal (s) described above is not a problem at all.  Simply insert the CD purchased by Carlos Santana, containing the song "Maria Maria"... Select the desired Format (WMA; WMA VBR; WMA Lossless; or mp3)... Select the desired flow rate (WMA... 128/160/192kbps_mp3: 128/192/256/320 kbit / s; etc.) ; and click on the "RIP" button to start the copy process on the hard disk of of Carlos Santana's "Maria Maria".  This process (w / WMP-10) would result in having the same song, copied on the hard disk, with levels of quality different "audio" (via the different bit rate settings); regardless of the format (MP3/WMA) which was chosen.

  8.) my experience w / Windows Media Player 11 (w / the operating system of Windows XP): using WMP 11, to described above of my objective (s) could not be reached e-a-s-i-l-y.  The problem with WMP - 11 - in short - which was after the desired selection "Rip settings" tab 'Options' of WMP - 11 (i.e., Format & Bit Rate) and heart-wrenching piece wanted to {'Maria Maria by Carlos Santana'} a moment later/second, WMP11 remove / would crush the previous version of the song [even].  Therefore, the program would NOT allow the user to have multiple copies of the same song on the hard drive of the PC; which obviously restricts a user to have the freedom to choose what level of quality digital audio, they prefer to listen to.

  9.) the ability to have multiple copies [at my descretion] of the same song (on my hard drive) with different bitrates and formats in my music library, is important for me because it has a direct impact on "how I enjoy MY music ', and in what form (audio quality), I choose to listen to my music.  {For example, when I exercise and listening to my camera, digital audio player (Zune), a song ('Maria Maria by Carlos Santana'), will usually be torn off at a lower rate due to the unit of capacity reduction of storage - compared to the storage capacity of notebook PCs/desktop/external hard drives PC.}  However, when I listen to my music through my home cinema or entertainment system (which contains a hard disk dedicated with a large storage capacity), I prefer to load the entertainment system with digital music files that have been ripped to WMA... with the bit being rate-setting is for the: settings "WMA Variable Bit Rate" or "WMA Lossless.

  10.) there you have it.  This is my first post in this forum.  I hope that [detailed] explanations, will be sufficient to encourage these "with knowledge & the hands on experience" using Windows Media Player 12 (as well as with WMP-10/WMP-11 respectively), by providing a [step] "How-to"... "solution to my situation.  It would be highly appreciated.  I'm looking forward-'the solution' - and relevant suggestions & and/or community feedback regarding my request for assistance.

  * Thank 'All' (that would) in advance... For your time & Assistance *.

  Certainly, you can, but I would say that they be in different folders, for your convenience as well as Windows.  You can create one for each debit/format, then you will know who is who.

  In Windows Media Player, on the toolbar, select Tools, Options, Rip, and then select the flow you want first, rip music, then change the folder (higher on the same tab) and rip again... and so on and so forth.

  When you are at home on your home theater, you can use the 320 bitrate folder, when you transfer to the Zune, you can use one of the lower bitrate files (although I personally tear it up to 320 and let the Zune reduce as he wants, even with the iPhone via iTunes, hard drive space is not really a problem here) my server has several hard drives, and I can always add more if and when space is low!

• How to make 2 screens with different information about them, in Microsoft Vista

  I have a laptop with Windows Vista on it. I want to use another screen and have different information about them. How can I do.

  Follow the procedures on the titles below links:

  On the new display settings, choose the option 'Extended '.
  Set up multiple monitors
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-multiple-monitors

  Then, you can move your program windows to the second monitor.
  Move windows between multiple monitors
  http://Windows.Microsoft.com/en-us/Windows-Vista/move-Windows-between-multiple-monitors

  Others that you need to read:

  Multiple monitors: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/multiple-monitors-frequently-asked-questions

  The problems of multiple monitors
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-multiple-monitor-problems

• Want 5530: Install 5530 want twice on same PC with different printer profiles

  Running Windows 7 Pro.  I want to install my 5530 printer like the first time with the name of the printer that includes 1 side printed and it default profile 1 side printed.   I would then like to install this same printer a second time, but with a name that indicates 2-sided with his descriptive default on 2 sides.  The first install the Panel very well.  However, the software will let me install a second time.  It stops in the process where I tell it to connect via USB.

  I can install it using the Win7 "Add a printer", but nothing will be printed on it.  It seems to use a port USB, for example USB006, where the printer software creates a "printer virtual port xxxx".

  1. How can I install the 5530 desire a second time on the same PC with this own printer profile?

  2. in the "Devices and printers" Win7, it sort of just "copy" the first instance/profile of the printer to a second instance if I can just change the profile?

  Hello

  Devices and printers, click Add printer and select a local printer.

  Select the LPT1 port, and then click Next.

  Select HP or Hewlett-Packard in the manufacturer list, then the HP Envy 5530 in the printer list, and then complete the wizard.

  Once you have finished, right-click the existing copy of the 5530 (the one created by the HP software) and select printer properties.

  The tab of Ports to take note of the selected channel and close the window.

  Right-click the newly added copy and select printer properties, select the same port as configured for the original printer and press OK.

  You can set each printer as required and name it accordingly.

  Kind regards

  Shlomi

• Want to combine two tables with different numbers of lines 2d

  I'm out data in a file in 2d tables, then adding more as it goes, and I run into issues when the size changes.

  2D arrays must be of rectangular shape, so those empty space you have it will be filled with the default value of any data type you are using. See attachment for the concatenation of tables:

• Using clips with different frame aspects and pixel in the same project

  Hello

  I have two clips:

  clip1: AVCHD 1440 x 1080 and the rationing of 1.3333 pixel aspect (the ratio of the image is 4:3)

  Clip2: AVI 720 x 576 pixel aspect ratio of 1.0940 (the ratio of the image is 5:4)

  I want to use the two clips on the same project.

  I chose a project suited to the preset clip1. (in this case most of my images will be of this format).

  If I do not make any changes to the elongation of pixel (using the Interpret Footage) the result is that the letter boxing serves around clip2. It is acceptable but not ideal.

  Can I change the format of clip2 pixels so that it is the same proportions as clip1? If I do this but I don't eventually clip2 distortion? What would be a worse result than the current situation with letter-boxing.

  Can someone advise; is it possible to merge these elements from two sources into a single output seamless file?

  With our thanks

  -Justin Wyllie

  Justin,

  If the IRON Clip 2 (size of pixels) is correct, i.e. the film doesn't look like stretched or squeezed, I wouldn't do any adjustment to that.

  To reduce or completely remove the black borders around it, you can adjust the fixed effect > Motion > scale, to fill the large size of the frame. Note: due to the difference in image format, to fill the full scope of the project, you will be actually reframe some of top and bottom. Using the fixed effect > Motion > Position, you can adjust exactly where culture goes, say all high, or to all of the background, or by a different ratio of high & low. This choice must be based by the framing of the topic in Clip 2. This choice is yours.

  Note: when scale upwards, quality will decrease, but maybe not too difficult to use only images, but the decision is yours also. There are several programs, and some that are plug-ins, this top-floor a little better than the Motion > pre scale. I would investigate those. One Magic Bullet Instant HD Red Giant, was used by many, even if some users were not enough to buy the pleasure. Just something to consider.

  Good luck

  Hunt

• Go to the local site, even with different versions of DreamWeaver (CS3 and CC2016)

  I have a need to occasionally change a site with DW CS3 because of a plugin used to LASSO programming. But I would do most of the work in the last DW2016. Is there a problem with access to the same site (local on my Mac) with two different versions of DW? I would like to only access and edit pages with the old version. I know that I could get some weird previews in the old version, but are there other issues should I be aware of?

  No problem I can think of, apart from one slightly different code entry than the other. CS3 will use outdated html attributes for things that later versions use CSS to accomplish (centering text and other). It's still going to work in all major browsers, but the CS3 code won't be to modern standards, if you use it for more than the old extension.

• Paragraph style with different key on the 1st and 2nd lines

  Hello

  I want to do a paragraph for a caption style. The font size is 5. the first line must have 5 pt leader and the second line must have 6 main points. Is it possible to select this as a paragraph style or I have to put the different leading to each line manually each time?

  Adrian

  Could be done, I suppose, using a style of character as a nested line Style, but why do you need to do this? The leading of the first line value does not actually affect the first base line in a block of text. Would probably be a better way to fix the first line of base to 5.