I want to make a donation, but not to give my name and address

Similar Questions

• Machine Vista "frequently", but not always, ask user name and password to access the public folders on the XP machine.

  Location:

  4 x Vista computers
  1 x XP computer acting as a server file, all the data in the "shared folders".

  All 4 Vista computers were to access shared data on the XP machine for two years without problem. All of a sudden this week one of the Vista computers "Frequently" but not always ask for a username and password to access the machine XP - not only shared folders, but still a list of shared resources on the machine XP via my network places is the result in the box of "connect to" request credentials to appear. All 3 other Vista machines have no problem to access the XP machine, so the problem must be with the a Vista machine.

  To put a spanner in the works as I have said in this case "Frequently" and by that I mean probably 9 of the 10 connection attempts. Let's say, you can see the name of the computer in my network places, you double click it and have asked for credentials, cancel the attempt and to repeat 4 or 5 times and then you could get display shared resources without going into the details of connection. For a few minutes, you might be able to access all the shared data and to navigate through the folders, but then all of a sudden have asked you credentials and can not access to anything, even the files accessed you seconds before.

  Lets say you are able to access the shared folders, you navigate to the Parent folder, then under A folder, then a subfolder B, go back to A notebook, then try to access folder B even once and you get guest credentials, quit out of the network completely locations, navigate back to the XP via Network Places and this machine you not even be able to display all the shared resources on the XP machine.

  I've also set up a shared folder on a Vista machine with matching username and password on the machines and the Vista machine with the get the problem exactly the same problem so this definatley Vista machine with the question and not sharing files on the XP machine.

  Someone at - he met before or have any suggestions?

  Hi MikeBarnes,

  You can check in the Analyzer for performance and reliability.

  Step 1:

  To start reliability monitor and performance monitor

  a. Click Start, right-click computer and click on manage.

  b. in the Microsoft Management Console navigation tree, click on performance and reliability.

  Step 2:

  You can also try a system restore to a point before the problem started.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I have an internal modem on my pc that is running windows server 2008, and I want to make a connection. Not a connection to an Internet service provider

  Hello

  I have an internal modem on my pc that is running windows server 2008, and I want to make a connection. Not a connection to an ISP, but to a mac. I want to transfer data via phone ports, have two computers without being connected to the outside world.

  Thank you

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• I want to make a donation to a charity, a desktop pc.

  I want to make a donation to a charity, a desktop pc but don't want it registered for my more. Can I re - install Vista without activating it?  A clean installation, following the instructions on the support site for Windows is recommended to clean all traces of me in the system, but I don't want to be identified with the pc any longer after that he gave to someone else.  Any ideas?

  Mike

  All activation methods used by Microsoft are designed to help protect the privacy of the users. In cases where information is sent during activation, it is used to confirm that the customer has a legally licensed copy of the software, and then the information is aggregated for statistical analysis. At this point, no data goes back to an individual customer. At no point in the process, Microsoft uses this information to identify or contact customers. For more information about privacy policies, please visit the Microsoft Web site, the privacy .

  http://www.Microsoft.com/piracy/MPA.aspx

  Even if you reinstall Windows, the traces of your files may remain on the hard disk. You must use a program to overwrite free space on the disk. You can use these programs

  • SDelete http://technet.microsoft.com/en-us/sysinternals/bb897443
  • CCleaner, http://www.filehippo.com/download_ccleaner/ drive wiper tool

• Want to download 10 W but not able to do that, during installation, a problem arises and the previous operating system is restored.

  My laptop is preinstalled with Windows 7 Home Basic.  At the free launch Windows 10 I downloaded the same and after 2 months, the hard drive crashed.  The repair shop trying to fix formatting, but could not revive.  This is why I bought a new hard drive and repair charge shot Windows 7 Ultimate edition.

  Now, I want to download 10 W but not able to do that, during installation, a problem arises and the previous operating system has been restored.  When I posted the question about how to solve this problem, I was told to try the download by way of USB/ISO file.

  Now my question is that

  one) can I reload Windows 7 Home basic as I have the product key?

  (b) I can then download Windows 10 according to the normal procedure?

  I'm not tech savvy, afraid to download files in USB and then load into the laptop, so this question.

  Concerning

  S Subramanian

  Original title: Windows 7 Home basic

  You can directly download Windows 10. Windows 7 complete edition currently installed is not genuine.

  When you upgraded from a previous version of Windows, what happened is that (your PC) hardware will get a digital right, a unique signature of the computer which is stored on the Microsoft Activation servers. The real Windows 7 or Windows 8 license you were using previously will be exchanged with a key to the diagnosis.

  Whenever you need to reinstall Windows 10 on this machine, go just to reinstall Windows 10. It automatically reactivates.

  Therefore, there is no need to know or get a product key, if you must reinstall Windows 10, you can use your Windows 7 or Windows 8 product key or use the reset function in Windows 10.

  Step 1: How to download official Windows 10 ISO files

  Step 2: how: perform a clean installation of Windows 10

• Hi all, I have 5 LR I purchased with a serial number and a week ago I got the message about a new update, I want to get LR 6 but not the creative cloud, LR4 LR5 to last time it was just an update without having to buy the creative cloud ,

  Hi all, I have 5 LR I purchased with a serial number and a week ago I got the message about a new update, I want to get LR 6 but not the creative cloud, LR4 LR5 to last time it was just an update without having to buy the creative cloud is it possible to LR5 LR6 to? Thank you very much.

  Jeffrey

  Yes, you can buy Lightroom without subscribing to Adobe Creative Cloud.

  To purchase an upgrade to Lightroom 6 from a previous version, please see this link: products .  Scroll to lightroom and click 'buy '. Then click on the selectable text next to "I want to:" and select "upgrade". In the drop-down list, select the version that you are upgrading.  I hope that help.

  Best regards

  Guinot

• Whenever Adobe reader tries to update it is said that the documents is not a valid file name and he ceases to make the update

  Original title: update problems, installation, uninstall, even adobe reader...

  Whenever trying to update my adobe reader it says that documents is not a valid file name and he continues to do the update and says update failed. I can not uninstall. What is happening and how to fix it?

  Hi SMHaney,

  1. What is the full error message you get?

  You can read the following article and try the steps and check:

  How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer

  You can also check out the following link and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/error-1325-documents-is-not-a-valid-short-file/2d9db4a9-25F3-4563-BDDA-ef71e31f7573

  Important: The above article contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  Back up the registry

  You can also try to create a new user account and check.

  Create a user account

  Hope this information is useful.

• Want to disable in IOM, but not in the target's resources

  Hello
  
  As part of the workflow of the exception we want to disable user in IOM but do not want to disable to target resources [AD, Notes and ACF2]
  Please let me know how we can control more to disable by default of the IOM that invokes the task of the target user Disable systems.
  
  Thank you
  
  Published by: without fear 6 on November 11, 2010 12:28 AM

  Go to RACF, process definition AD user, Notes, etc.

  The open user Disbale
  Remove the type of shutter inside (disable the Application *)

  Create a user task check
  Added a trigger Type to disable the Application Access etc.
  Plug your adapter that will check if you want to disable the user or not based on the checkbox in the user profile.
  Send the answer YES or NO
  If so, call turn off the task of the user of the AD Notes, RACF etc.

  For NO answer, do not call any task.

• How can I make a second copy so I can make some changes, but not to lose the original document?

  How can I make a copy of my new convert pdf word document without losing the original document?

  Hi mariponce,

  Please see my reply to your post duplicate on this topic: How can I make a second copy so I can make some changes, but lose the original document?

  Best,

  Sara

• Gamepad Xbox 360 as seen in "Device Manager", but not recognized as "Game controller" and will not be installed all the drivers

  My problem is very similar to the one raised here:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-gaming/Xbox-360-controller-seen-in-Device-Manager-but-not/fcf52151-604e-4BF3-BF55-2fa4930bc415
  However, the OP in this question unfortunately never had answer to his question.
  When I plug my Xbox 360 controller on my laptop, my computer recognizes it as a device, but does not recognize it as a game controller. Instead, my device is listed under a category called "Other devices", and the drivers are not installed (he gets the little warning sign yellow after the icon).
  I tried to install the correct 'Microsoft Xbox 360 accessories' (http://www.microsoft.com/hardware/en-us/d/xbox-360-controller-for-windows (Windows 7 64-bit)) and direct the machine to install its drivers from there, but nothing helps.
  I've tried right-clicking on the device, by clicking 'Uninstall', out in him plugging, uninstalling and reinstalling Microsoft Xbox 360 accessories, restarted my computer and each unique combination of these things.
  I tried to talk to an Ambassador of Microsoft, who told me to update the driver and manually make a 'human interaction device', but unfortunately it did not work.
  I called Support of Windows games, who gave me information from these links:
  support.Microsoft.com/kb/908888
  support.Microsoft.com/kb/906347
  Outside of download the drivers manually in the form of 'Microsoft Xbox 360 accessories' (which I already have), I wasn't able to try all of the hotfixes listed in the guides, because my camera is not listed as a joypad or human interface device. It is simply listed as "Xbox 360 Joypad" and it is listed under the heading "other devices."
  It seems that there is just something wrong with my USB and it's just is not installing drivers properly, but this isn't the case. I plugged many other devices, including an iPod, a mouse and an external HARD drive, which all had their drivers properly installed and works great.
  I also know that it is not a problem with the xbox controller, that I plugged into another laptop (also Windows 7 64-bit), as well as pilots very well on the other laptop.
  I'm really puzzled by this situation. Any help would be greatly appreciated, but please do not repeat the information or links I listed here, or who was in the last question which I quoted above. Thank you for your help.

  UPDATE: I finally got to work. Everything is beautifully detailed in this video from Youtube:

  http://www.YouTube.com/watch?v=kxa5CJsDzwQ
  Here's what you do:
  1. plug your device and go to Device Manager
  2 right click on everything that your computer recognizes your device as (for me, it was listed under 'Other devices' and had a yellow warning sign on this subject) and click on "Uninstall".
  3. disconnect your device
  4. If you have not already done so, download and install the appropriate for your device 'Microsoft Xbox 360 accessories' program
  5. plug your device back on and go back to Device Manager
  6 right-click on everything that your computer recognizes your device as (for me, it was listed under 'Other devices' and had a yellow warning sign on this subject), but this time click on "update driver software".
  7. click on "browse computer driver software.
  8. click on "Let Me pick from a list of drivers for devices on my computer.
  9. Select "Microsoft Common Controller" and then select your device. Have it install this driver. From there on, it should work on.
  If you have any questions, my email is * address email is removed from the privacy *.

• How to view, but not to give the possibility to download?

  Hello

  I registered today to use adobe send and I did a few test.

  My only problem at the moment: is it possible that my correspondents can see the pdf I send them, but early not able to download it?

  For my this is important: I will give people the ability to view my files, but not to be able to download and send them to others.

  TNX!

  No, it is not possible to limit your recipients to view, but not download, the files that you send with Adobe send.

• Job is planned but not for County running increases and failure

  Hello
  
  I have 3 scheduled tasks to be run immediately.
  
  I have last_date dba_jobs as NULL. So I guess he has not returned for the race.
  I see the number of failure increases at regular intervals, and it shows currently only 5.
  
  The work queue parameter has a value of 130.
  I have about 40 jobs (including these 3) with broken dba_jobs as 'n'.
  
  I want to troubleshoot why these 3 jobs are still pending?
  Could you please provide me with some tips to identify the problem and fixing?
  
  Let me know if you need more information.
  
  P.S. I'm not a DBA, I can ask DBA for more details if necessary.
  
  Thanks for you answers.
  
  Published by: amri on November 15, 2011 13:30

  You will find in the document Oracle 9 how DBMS_JOB failures are handled http://download.oracle.com/docs/cd/B10501_01/server.920/a96521/jobq.htm:

  >
  When a job fails, failure information are saved in a trace file and log alerts. Written Oracle number of message ORA-12012 and includes the number of workstation failed.

  The following may prevent the proper performance of work queue:

  The failure of network or instance
  An exception when executing the task

  If a job returns an error as Oracle tries to execute it, Oracle tries to run it again. The first attempt after a minute, the second attempt, after two minutes, 04:03 minutes and so on, with double the interval between each attempt. If the job fails 16 times, Oracle brand automatically task as incorrect and is no longer trying to run it. However, between two attempts, you have the opportunity to correct the problem that prevents the job to run. This will not disrupt the retry cycle, and Oracle will eventually try the task again.

• update of installed firefox 38.0.3. Now all connections App does not currently erasing data name and p/w on "logout".

  I just loaded the update of Firefox 38.0.3 on my MacBook Pro. Now none of the log in and password information are cleared in the box account log, when I connect. When I call the box connection even once again, my username and password are ALREADY FILLED in. I then access account (s) with out enter the login name and password.//Tried several logins and all respond the same. Once I get the connection info, that remains in the connection entry box. I tried to delete the connection and closing the application info. When I called the application the login box was always full with my user name and password. Help! PLEASE FIX THIS BUG! All other operations of firefox seem okay / / Note: I restarted my Mac, but nothing has changed.

  If you subscribe to the wide then you turn off the cookie that authenticates you and you must log in again.
  If you visit the page, sign in then Firefox will normally fill out the name and the password automatically except if the site uses autocomplete = off (not sure if this is always respected in 38 Fx).

  You can set the pref signon.autofillForms false on the topic: config page to prevent Firefox to automatically fill in the name and the password.

  You can open the topic: config page via the address bar.
  You can accept the warning and click on "I'll be careful" to continue.

  • http://KB.mozillazine.org/about:config

• my new version of firefox will not save my user name and passwords - why?

  My version before I updated to 4 saved all my usernames and passwords. Since the update to version 4, it records only a few. I checked that I'm not running in privacy mode and have checked remember passwords and have a master password in the Security section. I have a laptop with Windows Vista.

  Some sites like PayPal, Yahoo, Windows Live, and bank sites use autocomplete = "off" to prevent Firefox to save and fill in the name and the password.

  If a site uses autocomplete = "off" then look at this article for a bookmarklet to remove the attribute autocomplete and Firefox will provide store name and password.

  • http://KB.mozillazine.org/User_name_and_password_not_remembered (bookmarklet)

  If a Web site creates the login via JavaScript form then the password manager does not offer to store both passwords (Bug 518516).

• At the start of webcenter field, how not to enter user name and password?

  Dear all,
  
  I followed this link from http://yonaweb.be/start_webcenter_domain in my field webcenter installation and I managed to put my own webcenter and explore the busy webcenter spaces.
  
  My only concern is that when I start my webcenter field he always asks for the user id and password for the weblogic.
  
  I created a small batch for this file.
  

  call C:\Oracle\Middleware\user_projects\domains\webcenter_domain\bin\startManagedWebLogic.cmd WC_Spaces http://localhost:7001

  But how do I get away from type the user id and password?
  
  Thank you

  >

  Otherwise, you can specify the user name and password in the properties of your domain's initialization file.

  \user_projects\domains\dryrun_domain\servers\AdminServer\security\boot. Properties.

  # Generated by SCW on sea
  user name = {ESA} dbjKVafUpVLPvTG04tGl12RJRCaYmU5dmv2Yw =
  password = {ESA} 5WHBgndS2Fq2uoiIKKWI + rM2uwTPAYQ0I =

  Replace the username and password with your credentials.

  There's a tutorial with screenshots that describes how to do this here:

  http://St-curriculum.Oracle.com/OBE/FMW/WLS/10G/R3/installconfig/enable_auto_login/boot_identity_file.htm#T4