I want to move a program from one hard disk to another is possible?

I want to move a program from one hard disk to another is possible? I have the original disc to the software, but it is damaged. The hard disk that contains the program barely works, so I need to transfer all the programs and data to another drive. I used the transfer Assistant, but that will not transfer this program?

Unless you make an exact copy of the installation CD, I'm not sure there is much else you can do.

You can always try using a cloth and wipe the disc from the Center outward. That might do the trick. Or you can use a program like IMGBurn and create a new CD and hope for the best. Other than that, I'm ideas.



Tags: Windows

Similar Questions

  • Transfer the profile from one hard disk to another without launching Firefox or the operating system.

    I just got a new laptop because my old card mother fried on my desk. The old master by car is very good and I have a transfer kit that I can use to transfer some files I need. I can't figure out how to transfer my Firefox profile on the new laptop computer. I can not locate where the files I need transfer and do not know what files those who would. Only article I could find here requires being able to either launch Firefox or the operating system. I can't do either so help please.

    Thank you!


    You will need to take ownership of the files if you do not have permission to copy files. You need to do when running Windows Explorer as an administrator.

  • Transfer from one hard drive to another

    I transferred all my music from one hard disk to another. I want to be able to play these files from the new location without redownloading everything iTunes game or duplication of entries for the itunes files.  At the moment Itunes shows my entire library with the icon for download next to him. If I drag and drop files from the new location to Itunes, it creates duplicate entries.  I could re - download the entire library through itunes game, but it would be a big waste of time. I wish I could tell itunes to search my library in the new location of the directory. Is this possible?

    For general information, see make a library of portable split . If the library was already divided and you have moved the content from one disk to the other you can fix things by reassigning drive letters. Otherwise if you copy the library files and place inside press it then it should be as if you moved a portable library as a unit and everything should be back in place.


  • Move the VM from one data center to another domain controller

    Hi all

    I have a machine virtual Windows 2008 R2 64-bit with 2 GB of 32 disks each and I need to migrate from one data center to another data center. Everything can agree with the approach on this movement of server? Thanks in advance.

    Summary: -.

    Source VC1-VM

    Target the VC2:-need to migrate to VC2

    Thank you


    As you move between two different vCenters, you can export the VM as OVF and then import them into the second vCenter.

  • How to copy data from one hard drive to another after the upgrade?

    I have a HP e9220y, and I recently bought a new hard drive for it. There is nothing wrong with the former, but this one has a 64 MB cache and 7200 RPM so I hope it will be a little faster. I installed it and it works fine, but I want to copy all data from the old disk to the new so I can start everything off the faster hard drive and I seem to have a bit of doing wrong. I can't just copy and paste because of the Windows system files that are used. And last night when I set up Windows backup, and went to bed, when I thought it that Windows has recovered from a stop unexpected, rebooted, and only 2 GB of data saved obtained.

    What is the best way to move all the data from the old drive to the new drive, make it the default C: drive and move partitions system and factory_image as well? Thank you!

    Please read this link to another post made by Big_Dave and myself


    (1) If your old drive and the new drive is Seagate or Western Digital, then free House with their cloning software.

    (2) before starting the clone process, I found best to perform a disk cleanup and defragmentation.

    Cloning software to copy the two partitions. Example:

    Old drive 250 GB formatted to 232 C: created 220 and 12 GB D:

    New 1000GO drive formatted to 931 GB created 919 GB C: and D: to 12 GB

    The "Seagate disc Wizard" cloning software will let create you a clone automatic or manual partition resizing.

    The two modes to offer an overview of the actions before commit you. The manual on this page of Seagate (PDF) is 68 pages.

    After the cloning process he complete, all you have to do is swap on the disks. Besure to connect your new disc on the original motherboard SATA port.

  • Transfer raw files from one hard drive to another

    Hi, my friend has had lightroom 6 v6.0 and wants to transfer its raw files on one hard drive to another and he asked me what he should do but I don't know, does anyone know how to transfer files from one disk to the other raw? Thank you!

    Hi johnboy,.

    Please see How to move your Lightroom Photos to another HDD - LensVid.comLensVid.com

    Here is another article Running Out of Space? How to move pictures to another hard drive. Lightroom training Laura shoe, tutorials and tips

    Kind regards


  • How to copy photos of LR from one hard drive to another?

    Hi, LR peut the photos to copy a hard drive to another?

    I need necessarily ...

    The first hard drive I'm a messand I would like to that If LR has copied all the pictures for the second hard drive and created a folder by date.

    Peut it?

    What would be you have me or recommended by another program?

    Thanks Tomas.B

    Tanuj Sandal said

    Please visit the following links: How to copy files to an external hard drive in Lightroom | Adobe evangelists - Julieanne Kost. Adobe TV

    Despite the title, this video explains how to MOVE pictures, not how to copy.

    There is no way to make copies of the photos using Lightroom, you can move the photos using Lightroom.

    jakubn26183962 said

    The first hard drive I'm a mess, and I would if LR has copied all the pictures for the second hdd and created a folder by date.

    Lightroom will result in no records per day, except when you import photos. If I could make a suggestion, leave your files in the same "mess" they are in now and use the keywords and other metadata to allow you to organize and search.

  • How to transfer data from one hard drive to another?

    I don't know how and has been upgraded to a new hard drive...


    Well, it may be quite simple, if you install the new OS in the new drive.

    Then you connect the older HARD drive, and you should be able to explore the contents of the HARD drive in windows and copy the data from the old disk to the new. Be careful with what is selected in the BIOS startup disk.

    But depends on the unit you have, because you might end up having several types of questions.

    You can also use any kind of external card, depends on the type of connection of HARD drive you have and for example, if its SATA, you can simply use a SATA to USB adapter.

    Let me know if this helped.

    Thank you

  • Transfer Windows 7 OS from one hard drive to another

    I think of buying a new hard drive soon, but stumbled upon this question.

    I currently have a genuine Windows 7 operating system installed on my computer. I had initially installed Windows Vista , but I had bought and installed a Windows 7 Home Premium Upgrade.
    If I haven't bought a new hard drive (in the sense of higher data transfer rate), would I be able to pass all of my files and my disk Windows 7 operating system hard current to the new hard drive?
    Or I have to buy another copy of the 'easy transfer' Windows 7 Edition Home Premium and files?

    If you move a drive hard mechanical to another mechanical disk, so long that the reader who is replaced, equal or superior in size, it must be able to back up your installation and restore it on the new drive.

    How to pass Windows 7 on a bigger hard drive - Notebooks.com

  • How can I move a program from one letter to the next?

    My drive is running out of memory & I want to spend a great program to a different drive letter. I have windows xp installed, service pk 3. How can I do this?

    Due to the unpredictable registry entries that create programs to install there where are stored other files associated with this program, the only safe way to move a large program on a different drive is to uninstall your current drive (Control Panel-> Add/Remove Programs) and reinstall it to your replacement meter.  There is no easier way to move unless the manufacturer of this program has provided a utility to do this.


  • XP version I have 2 drives bootable. I want to move the system from one to the other

    The info in the table below is of DISKPART.

    Volume 2 is on my old little drive. I share my most recent expansion and now it contains volumes 3 and 4. In my view, that the old drive is about to die. How can I get volume 3 the system volume

    Flight #.













    In good health







    In good health




    New Volume



    112 GB

    In good health


    I suggest you according to the question in this forum and check if that helps:


    It will be useful.

  • How can I move a photo library from one hard drive to another?

    How can I move my library of photos on a new hard drive?

    Make sure that the hard drive is formatted as HFS partition map + and graphics interfaces.

    Click and drag the full library to the current location on the hard drive.

  • What is the best way to copy all the files from one hard drive to another?

    Old disk 60Go new 320 GB drive.  I want to do the new replacement for the old disk drive.

    Old disk 60Go new 320 GB drive.  I want to do the new replacement for the old disk drive.

    Use disk cloning software.

    The safest way is to use an external hard drive enclosure to maintain the new disc during the cloning operation.  These come with interfaces USB or e-SATA to IDE or SATA interfaces for the drive and the computer.  Be sure to get the correct type.  If you have an available internal drive Bay, you can put the new drive it for the cloning operation, but do NOT restart with two connected drives.  After everything was settled down, you can mount the old disk of 60 GB inside, format and use it for storage of backup.

    Cloning (copy to disc) software may have been bundled with your new drive or may be accessed free of charge from the manufacturer of the new command.

    Otherwise, here are a few apps cloning that I have used myself or have been recommended by members of the community:

    Acronis True Image Home
    Paragon Drive Copy
    EASEUS Partition Master

  • Is it possible to print from Windows Explorer the folder and files from one hard disk structure?

    You want to compare the folder and organization of the files of two disks.  With the help of a visual comparison takes time.  Also want to print the subfolders and files in a folder for the purposes of comparison.


    Welcome to Microsoft Windows Vista Forums.

    You can try this:

    Create the Printdir.bat file

    To do this, follow these steps:

    1. click on start and run, type notepad, and then click OK.

    2. Paste the following text in Notepad:

    off @echo

    dir %1/-p o:gn > "% temp%\Listing".

    Start Notepad /w /p "% temp%\Listing".

    del "% temp%\Listing".


    3. on the file menu, click on exit and then click Yes to save the changes.

    4. in the Save dialog box under, type the following text, and then click Save:


    Click on the link how to add the feature print directory for folders in Windows XP and Windows Vista: http://support.microsoft.com/kb/321379


    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • How to make programs from the C: drive to another drive in Vista?

    I do not know how to move. I had never done this before.

    * original title - I need to move some programs from my c drive to another drive to make more space, I do not know how to do it please help? *


    You cannot move installed programs from one drive to another

    you will need to uninstall them and then reinstall the disk you want to install on these

    During reinstallion of programs you would have the choice of which drive you want to install them on


    but you can move your files and folders to a different drive



    and read this topic to make more free space available on C:

    see if this program helps you to determine what is take up space


    by default system restore will have up to 15% of the capacity of the hard disk

    you would like to reduce this amount



    also use disk cleanup


    The other Options tab is available when you choose to clean up the files of all users on the computer. This tab includes two additional ways to free disk space even more:

    • Programs and features. Open programs and features in Control Panel, where you can uninstall programs you no longer use. The column size in programs and features shows how much disk space each program uses.

    • System Restore and shadow copies. Guests delete you all but the most recent restore point on the disc.

    also scan for malware

    Download update and scan with the free version of malwarebytes anti-malware


    and read these information from microsoft on windows optimization


Maybe you are looking for

  • Problems with the windows 10 installation partitions

    So I try to install windows 10 via bootcamp on my macbook pro 2012. However, I still have problems when I get to the screen of partition on windows 10 installation. So I opened the USB BOOT EFI and install from there. I enter my product key, accept t

  • Is there a way to create a button for the toolbar that will display a page in "No Style"? ".

    I guess what I'm asking, it's... Is there a way to make a custom button to the toolbar which will allow me to change the view of a Web page 'No. Style' in the view menu. If so, how can I do this?

  • File error!

    Hello I am trying to program my NXT module using the LabVIEW for the NXT Toolkit. I copied exactly the table of waveform of volume to get started with the LabVIEW Toolkit for LEGO® MINDSTORMS® NXT: ftp://ftp.ni.com/evaluation/mindstorms/LabVIEW_Toolk

  • need drivers for my hp 15-d054se.

    I installed windows 8.1 and the problem is that I can't find where to download the drivers for my laptop. whenever I have Google it takes me to the printer drivers. I m frustrated by this. I have tried several ways of dufferent to obtain but could no

  • SHRINKER. ERR ~ really not a question of game but question of educational software

    I keep getting a Shrinker.err error message when you try to run my educational software on XP. It was runnning fine for months before with no problems. Now all educational software do not start. The main change that took place when the problems start