I was using a pirate... windows and I decided to change and buy the original... So I used the pirates to buy the original, which is legal?

Similar Questions

• I had installed windows 8.1 with bootcamp, it was a c drive and I tried to do a second drive d with management of the disks, but when I shrink c drive and format the partition which was made by the management of the disks to d ' training, it destroyed my

  I use macbook pro.

  I had installed Windows 8.1 with bootcamp, that there was a c drive, then I tried to do the second drive with disk management d when I shrink the c drive and format the partition which was made by the management of the disks to d ' training, it destroyed my mac osx.

  Please help solve this problem.

  This partitioning is not supported. Please download GPT Fdisk from http://sourceforge.net/projects/gptfdisk/ and install it on the Windows side. Once it is installed, thanks for posting the output as indicated in the CMD window.

  

• Is to reinstall windows and reformatting the same windows? How can I reformat windows? TQ.

  Is to reinstall windows and reformatting the same windows? How can I reformat windows? TQ.

  There are essentially two different methods to "install Windows":

  1. a clean install (which is basically all wipes) imply the shape of the disk (or partition).

  2. a repair install (which is supposed to leave all your programs and data intact) does not imply the formatting.

  Here are some useful guides:

  http://michaelstevenstech.com/cleanxpinstall.html

  http://michaelstevenstech.com/XPrepairinstall.htm

• I want to restore switch between windows and display the desktop icon

  a few days before these two icons was actually on the task bar and now I have deleted how restore it back
  (switch between windows and display the desktop icon)

  Hello

  Copy the new:

  C:\Users\Default\AppData\Roaming\Microsoft\Internet Explorer\Quick Launch

  To your user account to:

  C:\Users\launch of \AppData\Roaming\Microsoft\Internet Explorer\Quick

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Since the update of my pc based system with 10 windows and install the last Prime Minister CC when I drag a clip on the timeline audio does not come with it. I can hear audio playback in the preview window of small file so the audio is there, but it's not

  Since the update of my pc based system with 10 windows and install the last Prime Minister CC when I drag a clip on the timeline audio does not come with it. I can hear audio playback in the preview window of small file so the audio is there, but it does not appear or play on the timeline. I can drag an audio file of Ms on the timeline, but I need audio from my original file to synchronize my audio file recorded independently - used to be no problem... any ideas what I can not edit now?

  Hi Neil,

  Drag / drop may not work if you don't have any enabl; e source patch or did not target the track for the same thing.

  https://helpx.Adobe.com/Premiere-Pro/using/source-patching-track-targetting.html

  Vinay

• I reciently reinstalled windows and now the fence, restore down and minimize buttons are not mixed together.

  I reciently reinstalled windows and now the fence, restore down and minimize buttons are not mixed together. they are indervidual buttons. Have all the updates and service pack installed.

  I saw the screen shot, I think that Aero is disabled, or the Desktop Window Manager Session Manager service is disabled or stopped. Try to run the troubleshooter 'display the Aero effects. " And when firstly, you had the drivers that do NOT support Aero and then updates, Windows does NOT automatically update the settings. You must recaulculate the computer for Aero Performance Index is enabled.

  Or you can see more help on this page, which contains explanations of the Aero and a link to a Web page for downlading an application which solves the problems.

  Hope that helps!

  Marko Calasan.

• Hi all, I want to know what can I complie forms in windows and run the file met in the other operating system

  Hi all, I want to know what can I complie forms in windows and run the file met in the other operating system

  3177349 wrote:

  Hi all, I want to know what can I complie forms in windows and run the file met in the other operating system

  It depends only on the BONE of the application server.

  If your OS development and OS is different, you have to compile the fmb in the server again.

  Hamid

• I realized that I had a message to update for a while then when I checked, I found that the app CC was missing. I downloaded and installed the application, but it will not update of software. In the creative cloud Panel, the only options I get are the Hom

  I realized that I had a message to update for a while then when I checked, I found that the app CC was missing. I downloaded and installed the application, but it will not update of software. In the creative cloud Panel, the only options I get are the Home tab to check the activity and the Stock tab. The applications tab is missing. How can I get that back so I can update photoshop and lightroom?

  Please, try the steps mentioned here https://helpx.adobe.com/creative-cloud/kb/apps-panel-reflect-creative-cloud.html

  Let me know if it works!

• When my Captivate project is published on my LMS, course opens a new window.  You are able to copy the URL of this window and access the course without logging into the LMS.  How can I avoid this?

  When my Captivate project is published on my LMS, course opens a new window.  You are able to copy the URL of this window and access the course without logging into the LMS.  How can I avoid this?

  Return to your LMS administrator and ask them why they have not put in place more firmly. The scenario you mention should not occur if the LMS is well attached.

  Some LMS have the contents of the course are in a folder outside the web space so that users can access the course URL directly.  For example, Moodle t - it this way and then shot the course content in a temporary folder when the learner clicks on the link ask a module.  No matter how your LMS is supposed to do, it is currently not configured correctly.

• Open a new window and displays the record using JavaScript information

  I would be very grateful if someone could help with the following query. I produced a simple database using APEX, a page that displays all the records that are currently (in the form of tables). However, due to the amount of information and the resolution of the screen, not all columns are displayed on the resulting web page.
  
  I would like to change by making the information contained in a hyperlink column, which, once pressed will open a new window containing most (if not all) of the information for the particular record.
  
  I think that this requires JavaScript and, possibly, SQL, however, I do not know where to start.
  
  Can anyone provide any assistance will be appreciated.
  
  If you need additional information, let me know.

  You can start with this:

  http://Apex.Oracle.com/pls/OTN/f?p=31517:23

  Denes Kubicek
  -------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Opal-consulting.de/training
  http://Apex.Oracle.com/pls/OTN/f?p=31517:1
  -------------------------------------------------------------------

• Zoom window and minimizing the quirks

  I just discovered this message that solves a problem that concerns me for a long time

  More precisely: some applications of the mine should run maximized so I use SetPanelAttribute (hparent, ATTR_WINDOW_ZOOM, VAL_MAXIMIZE); to show directly the main table in full screen. According to the help of the function, the definition of the ATTR_WINDOW_ZOOM attribute still makes visible the Panel so I is not required (and do not in fact) DisplayPanel to display the window. So far so good.

  A problem arises when the user tries to minimize the main window, as in certain conditions, it is not able to restore the window more, leaving kill the program as the only solution to control again. The program, however, always runs in the background even if reduced.

  This only happens if the window is reduced by using the 'Show desktop' button in the taskbar: by using the window minimize button allows you to restore all the time.

  Just to add a little salt if the window is minimized to reduce at least once with the help of the button, the following uses the button show desktop does not prevent restore normally!

  Now, according to Yves post, if I first call DisplayPanel, then SetPanelAttribute to maximise this problem do not appear more. The first tests I did seem to comply with this statement.

  This is the expected behavior? Can someone explain why it's happening?

  If it's the expected behavior, in my opinion, at least a note should be added to aid stating that risk.

  Yes, that is what I had in mind. The idea was to try to avoid, as much as possible, showing the Panel between the DisplayPanel and call that maximizes then it (to avoid foil) and do this without permanently change the original boundaries, not optimized in terms of it, so that when the user restores his more later, it restores the correct position.

  Something like this:

  Placement of WINDOWPLACEMENT;
  intptr_t windowHandle;
  Rect oldPos.

  errChk (panelHandle = LoadPanel (0, "Application.uir of User Interface", PANEL));

  bounds of array not optimized in terms of save
  GetPanelAttribute (panelHandle, ATTR_TOP, & oldPos.top);
  GetPanelAttribute (panelHandle, ATTR_LEFT, & oldPos.left);
  GetPanelAttribute (panelHandle, ATTR_WIDTH, & oldPos.width);
  GetPanelAttribute (panelHandle, ATTR_HEIGHT, & oldPos.height);

  Override not optimized in terms of limits in order to try to avoid to display the front panel it is maximized.
  If, as a result, he eventually be enlarged to one monitor other than that desired,
  You may need to experiment with a different top/left position (or, Alternatively, not even trying to change the)

  Haut/Gauche and we hope that change the height/width will suffice)
  SetPanelPos (panelHandle,-10000,-10000);
  SetPanelSize (panelHandle, 1, 1);

  Panel before optimisation in order to bypass the CVI display bug
  errChk (DisplayPanel (panelHandle));
  SetPanelAttribute (panelHandle, ATTR_WINDOW_ZOOM, VAL_MAXIMIZE);

  We cannot use CVI function to restore the limits not optimized in terms, since it would have the side effect of
  -maximize the Panel. Therefore, we will use SetWindowPlacement to accomplish the same thing.
  Get the current location of the window and update its rcNormalPosition only.
  GetPanelAttribute (panelHandle, ATTR_SYSTEM_WINDOW_HANDLE, (intptr_t *) & windowHandle);
  placement. Length = sizeof (WINDOWPLACEMENT);

  GetWindowPlacement (windowHandle (HWND), & placement);
  placement.rcNormalPosition.top = oldPos.top;
  placement.rcNormalPosition.left = oldPos.left;
  placement.rcNormalPosition.right = placement.rcNormalPosition.left + oldPos.width;
  placement.rcNormalPosition.bottom = placement.rcNormalPosition.top + oldPos.height;

  SetWindowPlacement (windowHandle (HWND), & placement);

• I submitted a problem (the No. URL window) and in the response email, I clicked on the link that says "no, this does not solve my problem" but when I tried to put the actions that I took (which were unsuccessful) I get error "Must choose the subject line"

  I did the "Restore Default Toolbar" without success. I've updated my Java without success. I uninstalled HP Gizmo web printing which the Add box it says incompatible with Firefox 3.6.6 - and I still have no back arrow or window URL. I guess I'll have to go to the Chrome browser because I refuse to use MS Explorer. I enjoyed Firefox while IT WORKED, but if there is no window to the URL, it is useless.

  This has happened

  Each time Firefox opened

  today

  User Agent

  Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152 .NET CLR 3.5.30729;. InfoPath.2; .NET CLR 1.1.4322; OfficeLiveConnector.1.4; OfficeLivePatch.1.3)

  The URL/address bar and previous/next buttons are both on the Navigation toolbar; See below.

  Don't see the menu bar not (File, Edit, View, history, Favorites, tools, help)?
  Turn on/off the menu bar is a new feature in version 3.6.
  (~ ~ Red: Linux and OSX see ~ ~: what happened to the file, edit and view menus? )
  Windows Method 1. Press and hold the key and press the letters of the following in this exact order: V T M
  Windows method 2 Press and release the button. The Menu bar is displayed; then choose ~ ~ red: V ~ ~ iew > ~ ~ red: T ~ ~ oolbars and click on ~ ~ Red: M ~ ~ enu Bar.
  The menu bar should now be displayed permanently, unless you turn it off again using view > toolbars. Check = not displayed, NO check mark is not displayed.
  See: http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
  Navigation, bar toolbar bookmarks and other toolbars under view > toolbars. By clicking on one of them will place a check mark (display) or remove the check mark (not shown).
  To display the status bar, view, and then click status bar to place a check mark (display) or remove the check mark (not shown).
  Mode full screen
  http://KB.mozillazine.org/netbooks#Full_screen

  See also:
  Back and front toolbar buttons or others are missing
  Customize controls, buttons, and Firefox toolbars
  How to customize the toolbar

• How to: diagnose hardware - freezes in windows and in the BIOS

  Original title: material and gel

  I have a computer that restarts and freezes frequently. Sometimes, when it freezes, the fan will go up to 4000 rpm and I have to hold the power for 5 seconds and switch it off. I don't know what could be the problem. RAM checks see the rise of nothing and the power supply is not that old. There are a few times where I would turn it on and the bios does not appear or the bios screen is frozen and incomplete. More likely, it may be material, but I don't know how I can check. I also had blue screen with kernel errors do you know what it can be?

  HP AMD Athlon (TM) 64 X 2 Dual Core Processor 6000 + 3.00 GHz

  3 GB Ram

  Windows Vista 64-bit

  I think I found the problem.

  I removed a piece of memory sharp and rebooted the computer with a normal startup. After waiting about 10-15 minutes between boots, I would restart the computer. I did about 5 boots hard to ensure that the problem not would not recur. I found that the problem was one of my RAM sticks.

  No ram shortage just like that or it could have the heat from the computer? The fan is often times at 4000 rpm and there are about 4 hard drives working there.

• My monitor 23 '' will play only in low resolution and windows won't let me change it in the control panel

  New dell XPS 8500 but when I plugged my monitor on the screen was all swollen supersized and I can't increase the resolution of 640 x 489 that windows 7 has that option grayed out help someone?

  Go to the Dell website and download and install the latest graphics drivers for Windows 7 to your computer, then try selecting a higher resolution.

• Reinstalled Windows and not the product key is not accepted.

  Error of liscense

  I have had problems with Printer Spooler and because System Restore my computer 3 times in the last 2 days.  Now that we have decided that I must clear Windows and start on it, all of a sudden don't like my product key. What happened and can it be fixed?

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us