I wish I had the filter of CC oil painting

Similar Questions

• How can I customize the navigation bar in Firefox 29? I wish I had the back refresh/stop button in front of the navigation bar!

  How can I customize the navigation bar in Firefox 29? I wish I had the back refresh/stop button in front of the navigation bar!

  One of the developers has been around the forum recently try to answer some of these questions then I quote the developer

  For the entire quote and useful links for corrections and explanations please see

  • Why did you change your design to new Firefox 29,0? /questions/998084 #answer - 566525

  Each setting you see in a computer program you use requires work; when a developer wants to build something new or improve something, he or she has to go through each related (hidden) setting and test if it still works like before and do that on each platform Firefox runs on. That's Apple's Mac OSX, various flavours of Linux and various flavours of Windows, including Windows XP. This costs time, lots of it, and that amount grows exponentially with each setting that's added. This comes on top of our work to continuously fix, improve and innovate Firefox.
  

• I created mega menu in adobe muse (master page) but the thing is when I saw the menu in other pages stuff I alreahy had created the will overlap the menu. Can I do to fix this problem. I wish I had the menu overlap the things I

  I created mega menu in adobe muse (master page), but the thing is when I spotted this menu in other contents pages I had already created will overlap the menu. Y at - it options that may correct this problem. I wish I had the menu overlap content. This did not happen on the master page (master page looks good) thank you very much.

  Place the menu on its own layer above the rest of the page content.

• I just find the hidden admin profile, now I wish I had access to all the files in my other profile. How do I do that?

  I just had this puter abut a year ago and she never I would like to be admin. I just find how to access it and shoot profile up.it was hidden, I found a post on how to pull up through back comand. so now I have 2 log in options. mine or admin.

  now how to open the admin access to my profile?

  I wish I had the easyest and fastest way to unlock my profile so that my admin profile can be accessed freely.

  DO NOT DELETE THE HIDDEN ADMINISTRATOR PROFILE!  Just disable it is is no longer available for use (using the same procedures in reverse you used to activate it).   Then if your active Admiinistrator profile becomes corrupt, you can always turn it on again to restore the Administrator profile - otherwise, you're in trouble without an administrator account on the system (you might be forced to do a clean boot to get a new account of qualification and you don't want that to happen).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I wish I had my day starts at 08:30, 12: 00 no, but that change in the options does not seem to affect the appearance of my calendar, how can I change this?

  I just started to use Windows Calendar.  I wish I had my day starts at 08:30, 12: 00 no, but that change in 'options' does not seem to affect the appearance of my calendar, how can I change this?

  Hello
   
   
  Exactly why you want to change the start time of day?
   
  If the part highlighted changes in the calendar view, which means that the option is selected.
   
  I suggest you to see the link and check if this is useful:
   
  Customize windows Calendar
  http://Windows.Microsoft.com/en-us/Windows-Vista/customize-Windows-Calendar
   
  I hope this helps.

• We had to show the filter selection

  Hi gurus,
  
  I recently started working on WebAnalysis.
  I have the following requirement:
  
  We had to show the filter selection in tag which I have been using < filter, 0 > in the label.
  But the problem is when the user selects another table or data grid, these filters value is changed accordingly.
  
  I need to show a graph or grid only filters.
  
  Help, please
  
  Thank you

  Hello

  Usually the datasource WA threads are named as "ReportDataSrc", so if your first grid or chart uses ReportDataSrc1 as a data source and then the filter should consult this grid using this thread to data source name is
  >,

  This will give you the name of the first name of Member of dimension filter as a label.
  For any procedure, please visit the WA user guide.

  Thank you
  YSP

• Keep the filter for a game/folder

  Hello

  In early versions of LR, it was possible to keep search filter settings. I wish I had it back.

  Scenario:

  I work on all marked green in a set X I have spend to set Y, and you want to see all the images that are rated 4 stars or higher.

  This used to work and I got a solution to make it work in new versions of LR as well, but I had to reset my preferences and now he's gone. Maybe it was a preference that must be defined via a command line.

  Any help is very apprechiated!

  Thank you very much

  Stefan

  Follow the instructions below in the order:

  1. make sure that the file > library Filters > filters Lock is enabled.

  2. make sure the > library Filters > filters separately to remember each Source is checked.

• How to initialize the State of the filter?

  Hello

  In a VI I have continually acquire and filter several different signals (with for example the Butterworth filter or the Butterworth filter point by point). The problem is that whenever I call the filter vi ti eithers begins from a State 0 or state that he had when parsing the previous signal (depending on the Boolean control).

  What I need to do is to read the final State of the filter when it finishes a piece of 'signal' A filtering. Then, the next time I need to filter a piece of the signal, I could feed these values as the initial state to the filter.

  In fact, I opened the VI of Butterworth filter, then inside, I opened the cascade IIR filter inside, and there is shift registers giving access to initial and final of the filter States. But since it's in the Labview libraries, I can't edit them.

  I have also noticed that if I in independent bodies VI of VI for each signal, then each keeps track of its own States. But I have more than 25 different signals (and the number changes all the time) so it's not a viable solution.

  Was the answer, but post here in case someone else has a similar question.

  VI's like filter Cascade IIR with I.C. (initial condition instead of the initial state, that is why I did not before), allow you to initialize the filter and save its State for later. The only thing is you need to do your own coefficients with something like Butterworth Coefficients VI or more. But it is also an advantage, since you do not need to use each iteration time recalculate the.

• After having my computer up to date, it does not find the printer. It indicates that the filter of the keyboard does not have a pilot.

  After I had my computer cleaned and updated, I can't print.  A message says that the filter of the keyboard lacks a driver.

  Hello

  (1) what is the number of brand and model of your printer?

  (2) what operating system is installed on your computer?

  (3) the printer is not detected in Device Manager?

  I suggest you to try the steps below and check if it helps.

  Printer in Windows problems: http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Hope this information is useful.

• How to track a condition physical sql not in the filter

  Hello

  I created a simple analysis based on finance - GL balance sheet with columns like company, fiscal year, Fiscal Quarter and Cash (Fact - check). When I run the analysis, I had these physical conditions of SQL not in the filter at all. How to track where these conditions are defined as TRANSLATED_FLAG = ' not ?

  Thank you

  New kid in bi

  Select T111515.ORG_NUM as c3,

  trim (both ' ' of T146058.) LEDGER_CATEGORY_CODE) as c4.

  T156337. MCAL_PERIOD_NAME like c5,

  T156337. MCAL_PERIOD as c6,

  T156337. MCAL_PERIOD_WID in c7,

  sum (case when T102174.) GROUP_ACCOUNT_NUM = '110' then T134466. End BALANCE_LOC_AMT) as c8.

  sum (case when T102174.) GROUP_ACCOUNT_NUM = '300' so T134466. End BALANCE_LOC_AMT) as c9.

  T156337. ROW_WID in c10

  Of

  W_MCAL_DAY_D T156337 / * Dim_W_MCAL_DAY_D_Fiscal_Day * /,.

  W_LEDGER_D T146058 / * Dim_W_LEDGER_D * /,.

  W_GL_GROUP_ACCOUNT_D T102174 / * Dim_W_GL_GROUP_ACCOUNT_D * /,.

  W_INT_ORG_D T111515 / * Dim_W_INT_ORG_D_Company * /,.

  W_GL_BALANCE_A T134466 / * Fact_Agg_W_GL_BALANCE_A * /.

  where (T102174. ROW_WID = T134466. GROUP_ACCT_WID

  and T111515. ROW_WID = T134466.COMPANY_ORG_WID

  and T134466. BALANCE_DT_WID = T156337. ROW_WID

  and T111515.COMPANY_FLG = 'Y '.

  and T134466. TRANSLATED_FLAG = ' no

  and T134466. LEDGER_WID = T146058. ROW_WID

  and (T102174. GROUP_ACCOUNT_NUM in ('110 ', ' 300')))

  Group

  T111515.ORG_NUM, T156337. ROW_WID,

  T156337. MCAL_PERIOD_WID,

  T156337. MCAL_PERIOD_NAME,

  T156337. MCAL_PERIOD, trim (both ' ' of T146058.) LEDGER_CATEGORY_CODE)

  Check in the layer of MDB, properties of the respective table source.

  Thank you

  Srini vieren

• Filter oil painting works is not in Photoshop CC2015.1 update [was: the filter oil painting]

  I have a NVIDIA GeForce GTX graphics card of 775M 2048 MB running on an iMac OS X El Capitan, which is not listed as supported for the use of the filter of painting in oil. Is there a work around for this or I have to get a different graphics card to make this filter work?

  I had the same problem!

  I have Nvidia experience in my PC, so I do my graphic card updated her!

  Today I have re-updated drivers my directly from the Nvidia site! So its all is ok now! Oil painting works!

  After driver installation, you can enable OpenCL in preferences > performance > advance settings > use OpenCL

• I had the previous version of the Adobe Reader software, and I put in the comments of the editor. As reove, replace text, etc. And now with the new version of Adobe reader, they seem to have disappeared all of them, except perhaps the reminder.

  I had the previous version of the Adobe Reader software, and I put in the comments of the editor. As reove, replace text, etc. And now with the new version of Adobe reader, they seem to have disappeared all of them, except perhaps the reminder.

  Hi Mariam,

  Please try this:-with your PDF document open, click on the "comment section" on the side right of your document, under "list of comments", click the "Filter comments" icon and choose "View all comments" or "hide all comments.

  

  I would like to know if it works.

  Kind regards

  Nicos

• How do you remove the filter by the attributes of the Conrefs, but still conrefs display

  We use the FM8 Tech Comm suite 1 in a Windows XP environment.

  We have created a number of conrefs, and they do not display unless we had a filter by attribute > show all.

  Synopsis of the problem:

  We have created a conref, as we normally do and placed in the same directory as the map and the concept (target). In my case, the conref is a concept that contains a table.  We inserted the conref in the doc of the target and it appears correctly. However, when we save, it does not, unless we select special > filter by attribute > show all. We can save and reopen the doc, and it is still displayed. If she does not have the attribute filter > show all selected, all what we see at the beginning of the document is a marker of conditional text.

  When we created the conref, four attribute expressions are available. We tried to remove all of these expressions of the conref.

  In the target document where the conref is inserted, we choose special > conditional text > show/hide conditional text selected DITA Conref show. The conrefs are then displayed.  However, when we close the document and reopen it, we lost the conrefs, and the DITA Conref is more selected.

  Any ideas?

  Hi Mary...

  Modify application heading (and book) patterns structured and set the condition of DITA Conref to display by default. I don't know why that would have been defined to hide (hmm... maybe you have created your own applications and do not add these conditions?) ... but when you open a file DITA conditional parameters in the template are applied to replace those that the file has been saved with. Here are the typical location of the subject model...

  C:\Program Files\Adobe\\Structure\xml\DITA\app\DITA-Topic-FM\topic.template.fm

  I think that this * should * solve your problem.

  See you soon,.

  .. .Scott

  Scott Prentice

  Leximation, Inc..

  www.leximation.com

• results on the query with filter, but no results when the filter removed

  I was handed the query below and I may be missing something blinding here but if I run it I get no results
  
  SELECT lipqoh
  OF f41021 a, b f0006
  WHERE b.mcmcu = a.limcu AND
  b.mcstyl = "W";
  
  If I add the filter a.liitm = 105900 as data below is returned (although the inputs are 0 as expected at the moment, this isn't always the case)
  
  SELECT lipqoh
  OF f41021 a, b f0006
  WHERE b.mcmcu = a.limcu AND
  b.mcstyl = 'W '.
  a.liitm = 105900;
  
  the fields for each of the tables mentioned in the motion have the following features
  
  lipqoh number NULLABLE
  mcmcu Char(12 BYTE) NOT NULLABLE
  mcstyl tank (2 BYTE) NULLABLE
  liitm number NO NULLABLE
  
  Any guidance would be greatly appreciated

  Thank you for providing feedback. The only difference seems to come from the mcstyl columns.
  The following snipplet perhaps explain how this expression may be true or not true according to the data types.

  select * from dual
  where 'W ' = cast('W' as char(2 byte));
  
  DUMMY
  -----
  X
  
  select *  from dual
  where cast('W ' as varchar2(2 byte)) =  'W';
  
  no rows found
  

  This statement returns all rows?

  SELECT lipqoh
  FROM f41021 a , f0006 b
  WHERE b.mcmcu = a.limcu
  AND   b.mcstyl = 'W '; /* blank added */
  

  I expect so. I still don't understand why oracle treats differently the two queries. However I do not have an adequate control environment. Your version is simply a bit outdated (no longer supported). And I know that some of the type conversion rules had been changed between 9i and 10g.

  Published by: Sven w. on March 30, 2010 15:15

• AF:table with the search query present bindvariable name in the filter text field

  I created a simple display with a criterion of the view object. The criteriy defines a group with 4 criteria. Each element of the criteria has a STARTSWITH operator and compare a column to a binding parameter. The binding variable is marked as optional.
  Then I move the data control named on my page and selected criteria "Read - Only ADF filtered table"
  
  When the page is displayed to the user, I had the table containing the search field in the header.
  Unfortunately, the entry to the filter of the table fields are not empty, but containing the name of the connection variable.
  
  text in a filter for GebeCode: VarGebeCode *.
  text in a filter for NiedCode: VarNiedCode *.
  ...
  
  When the user just wants to filter on a property, for example GebeCode, the user must
  (1) type in the GebeCode
  (2) delete the input for other filter box filter: NiedCode,...
  Step 2 is heavy, but if the user does not specify an empty text in the filter, no lines are selected in the query.
  
  1 question
  How can I get the boxes of entry filter empty the first time the page is loaded?
  
  2 question
  As see you in the criteria listed below, I put the box "Ignoe box" (-> UpperColumns = '1') to make my case insensitive search.
  How ever, it does not work: it is always case sensitive.
  
  How can I get the framework to do things?
  
  
  It is the resuling query where clause:

   ( ( ( UPPER(MITA_NAME_VORNAME_CODE) LIKE UPPER( :VarMitaNameVornameCode || '%')  )  OR  ( :VarMitaNameVornameCode IS NULL ) ) 
  AND ( ( UPPER(MITA_CODE) LIKE UPPER( :VarMitaCode || '%')  )  OR  ( :VarMitaCode IS NULL ) ) 
  AND ( ( UPPER(GEBE_CODE) LIKE UPPER( :VarGebeCode || '%')  )  OR  ( :VarGebeCode IS NULL ) ) 
  AND ( ( UPPER(NIED_CODE) LIKE UPPER( :VarNiedCode || '%')  )  OR  ( :VarNiedCode IS NULL ) ) ) 

  Code MitarbeiterViewRVOCriteria

    <ViewCriteria
      Name="MitarbeiterViewRVOCriteria"
      ViewObjectName="model.mitarbeiterDetails.view.MitarbeiterViewRVO"
      Conjunction="AND">
      <Properties>
        <CustomProperties>
          <Property
            Name="displayOperators"
            Value="InAdvancedMode"/>
          <Property
            Name="autoExecute"
            Value="false"/>
          <Property
            Name="allowConjunctionOverride"
            Value="true"/>
          <Property
            Name="showInList"
            Value="true"/>
          <Property
            Name="mode"
            Value="Basic"/>
        </CustomProperties>
      </Properties>
      <ViewCriteriaRow
        Name="vcrow12"
        UpperColumns="1">
        <ViewCriteriaItem
          Name="MitaNameVornameCode"
          ViewAttribute="MitaNameVornameCode"
          Operator="STARTSWITH"
          Conjunction="AND"
          Value=":VarMitaNameVornameCode"
          IsBindVarValue="true"
          Required="Optional"
          UpperColumns="1"/>
        <ViewCriteriaItem
          Name="MitarbeiterViewRVOCriteria_vcrow12_MitaCode"
          ViewAttribute="MitaCode"
          Operator="STARTSWITH"
          Conjunction="AND"
          Value=":VarMitaCode"
          IsBindVarValue="true"
          Required="Optional"
          UpperColumns="1"/>
        <ViewCriteriaItem
          Name="MitarbeiterViewRVOCriteria_vcrow12_GebeCode"
          ViewAttribute="GebeCode"
          Operator="STARTSWITH"
          Conjunction="AND"
          Value=":VarGebeCode"
          IsBindVarValue="true"
          Required="Optional"
          UpperColumns="1"/>
        <ViewCriteriaItem
          Name="NiedCode"
          ViewAttribute="NiedCode"
          Operator="STARTSWITH"
          Conjunction="AND"
          Value=":VarNiedCode"
          IsBindVarValue="true"
          Required="Optional"
          UpperColumns="1"/>
      </ViewCriteriaRow>
    </ViewCriteria>

  Edited by: Stefan1979 the 06.11.2009 20:45

  Hello

  the case sensitive search is controlled by the 'filterFeatures' on the af: column. Due to a bug that is fixed in the next Patch set 1 of JDeveloper 11 g R1, that the search is always case-sensitive.

  Frank