record and playback

Similar Questions

• audio interruptions every 30 seconds on WAV recording AND playback - computer laptop Dell 1545, Windows 7

  Recently (the last couple of weeks), my laptop Dell 1545 with Windows 7 started having a problem: when I record or reading any WAV file (or a file MPG or WMV video too by the way) with any application (I tried several), there is a stuttering or interruption every 30 seconds like clockwork.  I have tried everything and can't seem to fix it.  During playback, it causes a split second buzz or silent, on the record, missing just a fraction of a second of audio, leaving a 'leap' in the best stuff WAV audio recording.  The only changes that I made in the system in the past month have been a few updates to Windows 7.  It ruins any recording or playback, I try to do, and is very frustrating.  It does the same thing on the files that are years old and new files (reading).  If I burn these files to a CD or DVD, they play very well in the CD drive or DVD, is not a problem in the files (except those currently record during breaks).

  What I tried:

  Much, restart several times.

  Reinstall the driver for my audio interface, even if she did the same on the native sound card too.

  Download the new driver from the audio interface and install it.

  Back to the old driver, then again to the new.

  Tried to record from multiple sources, ditto.

  I tried recording through the native as well as audio interface sound card.

  Deleted 40 GB from my hard drive.

  Defragged my hard drive

  Off my anti-virus program

  Close all other programs other than playback of the file.

  All USB disconnected elements.

  Tried to plugged the charger and entirely on batteries.

  RAM tested.

  Tested CPU.

  Nothing has worked so far.

  Any ideas?

  DWasnich: I had the same problem as you yesterday after restoring my Dell Inspiron 1545 to factory image. Through process of elimination (as mentioned Gokul T) I was able to determine that one of the services was originally the audio and video to jump to 30-second intervals. I disabled the 'Intel Matrix Storage Monitor' service and solved the problem. Why this service was installed and running after the factory reload is confusing. This is one portable hard drive without needing a RAID System. I hope this has solved your problem too! Joe

• Monitor, recorder and playback using ddns program

  Maybe I'm missing something, but I can't install the WVC54GCA monitor program to find a camera remotely using the URL given (via TZO).  Configuration features only a place for IP address, no URL.   If I find the current (dynamic) IP address for the camera remotely and plug in, everything works fine, but when the IP address is changed, I'll have to re - enter the new address.  A little defeated the purpose of the use of TZO.

  I called technical support and after 1/2 hour, I realized that they had no idea what I was talking about.  A specialist has promised to call back me, but it didn't happen.  I think that Linksys, which also makes good products, should reconsider support overseas.  It never works!   Just blowin' - blow off steam here...

  Anyone have an idea how I can fix this or what I am doing wrong?

  Thank you

  Anthony

  Thank you!

  I could find (not at all easy to find) a link in the Linksys forum, where the appropriate utility program was published by download.

  http://forums.linksysbycisco.com/Linksys/board/message?board.ID=cameras&thread.ID=9041

  This seems to access the camera via the net, using the TZO URL...   Good stuff and thanks again.

  Anthony

• Hearing CC randomly loses functionlity record and playback

  Any contributions to this issue would be great. I use Adobe Audition CC and after a few minutes reading and registration function lock. I am still able to edit and save as normal, but that's all. When I hit 'play' icon lights up as if it plays but does not move the playhead.

  If I click and let the program a few minutes of running in the background, sometimes feature returns,.

  So, I submitted a ticket with blue, the manufacturer of microphones and after a few emails back with them, it seems as if it was a question of power. the USB port that I had plugged in was not providing enough power to the yeti. I went to a different USB port and Bank and everything has been resolved. Thanks for all the help.

• Recording and audio playback problem

  I have windows 7 and I have problems with the audio recording and playback.  If I record something myself, or just play something on the internet, the "stretch" sound in places as the person talking is now on a particular letter; for example, they might say, "" Hi, theeeeeeeeeere. "» or "I'm nnnnnnnot a joke." How to return to nice, audio cleanup?

  Hello

  Welcome to the Microsoft Community Forum.

  I understand that you have a problem with the playback of the sounds and audio recording in Windows 7. I appreciate your efforts to solve this problem, I'll probably help you with that.

  To solve your problem, I'll give you some troubleshooting steps.

  Method 1

  Run the tool of Windows troubleshooting audio in your Windows 7.

  See the following Microsoft Help article and run the Audio troubleshooter and check if it helps. This is a built-in convenience store that helps you solve common problems with Audio.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  Method 2

  Try installing the latest audio drivers and check if the problem persists. This is to check if the problem is caused due to not install the drivers the most recent or not.

  http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN

  You can also view the following Microsoft Help article below:

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-7&V1H=win8tab1&V2H=win7tab4&V3H=winvistatab1&v4h=winxptab1

  Try the above steps and get back to us if the problem persists.

  Thank you

• ULaw and alaw record and play G711

  I want to be able to capture and play directly to the a - law and u - law format.  I have read several posts on how to put the reader (capture in my case) in amr and pcm mode.

  Capture of AMR and PCM is not a problem, but the correct string of capture to capture the u - law data is unknown to me.

  for the record:

  capture://audio? Encoding = PCM works, also tried something like:

  capture://audio? Encoding = PCMU (does not), also tried to replace with pcmu, ulaw, audio/x-ulaw

  capture://audio? Encoding = AMR (works)

  When I exit the capture I get supported types:

  Device supports capture Type: audio / amr
  Device supports capture Type: audio / basic
  Device supports capture Type: audio / x - gsm
  Device supports capture Type: image / jpeg

  To play, I think that I should put the x - wav player and provide good wav header, will try later, but my first concern registers directly as G711.

  I'm running on Simulator and device (BB Torch v6) which should be able to support the u-law/a-law.

  someone at - there more information on this? It is not possible or should I put the recorder in pcm mode and convert my data on the fly?

  Hi James!

  Registration is only linear PCM.  The reading can be linear, G711 uLaw and alaw for PCM.  On a BlackBerry audio/basic = audio/pcm.

  If you are interested, GSM is GSM6.10 of recording and playback, AMR's locker AMR - NB 12.2 Kb/s (unless you specify voipMode = true in your locator, but I will not go into these details, you can search the forums if you need more information on this) and any mode of AMR - NB valid for playback (only three units I know can also playback AMR - WB and AMR - WB +).

  Finally, to save some time there is code attached to this question (if you can connect, related to this thread) who has code to generate headers wav on the Blackberry platform for you.

• Record and play variable a string will not copy

  I have a variable of string - serialization of an xml variable result - in a process.

  It has a length of 'unlimited '.

  When I opened the recording and playback, there is text indicating the beginning of sequenced xml:

  < node_x

  That's all that I can see.

  Unfortunately, the option 'copy value' in the menu contextual is dimmed, just at the moment where I most need!

  This is normal behavior for a scenario like this?

  Is there anyway that I can get to copy...

  Thanks in advance!

  At least try to open and close the variable perspective.

• TCS recorded video playback using video endpoint

  Hello

  I've deployed a Telepresence from Cisco Content Server (TCS 5.3) and met with problem regarding on how to play videos recorded by video endpoint.

  Under modify records, I don't see an option or the option 'Make check-in available for play on the endpoints '.

  Referring on the Administrator's guide TCS it is said that "If this box is not on the page of registration of amendment, a site Content Server Manager has not configured the prefixes necessary to an alias of reading E.164 and H.323 reading ID to communicate with a site manager for more information. What does that mean?

  And where I can configure the reading reading alias/H323 ID?

  The TCS is registered as SIP and H323 (E.164) on the control of VCS.

  Recorded content have been updated with the recording of "publish".

  Thank you very much for the help.

  Best regards

  Acevirgil

  You must do the following:

  Key 'Premium résolution' option must be installed.

  Record configuration, see the Site settings, such as 'Bridge', not 'Terminal '.

  

  Enter the prefixes to use for recording, and also for playback, it may not be the same.

  Note that prefix of reading options will be unavailable unless the resolution option key Premium is installed.

  Also note the playback using the SIP is not supported at this stage.

  /Jens

  Please rate the answers and question 'Answered' mark as appropriate.

• My PC crashed. Restored on a new record and a new installation of FireFox. I can still access all the files. How do I take the old bookmarks if there is no backup?

  My PC crashed. Restored on a new record and a new installation of FireFox. I can still access all the files on the old drive. How do I take the old bookmarks if no backup exists, or has been completed? Does not save bookmarks of FireFox auto? If, then what is the file name and where is normally stored by FireFox?

  In fact, it can be easier...

  If you have the old drive connected as, say, drive E, go to:

  E:\Users\username
  

  Then click in the address bar and paste it after this and press ENTER to open it:

  \AppData\Roaming\Mozilla\Firefox\Profiles
  

  Normally, you have only one file, which has a random string followed by "default." In this case, click on this file and find the subfolder bookmarkbackups.

  If you find multiple profile folders, look inside to find the most recently updated backups.

  To restore the backup files, see: restore bookmarks from a backup or move them to another computer

• I have recorded and saved my favorites using Foxfire. It save the Favorites-2011-04 - 03.json. Now how export them in my current Foxfire?

  I have recorded and saved my favorites using Foxfire. It save the Favorites-2011-04 - 03.json. Now how I import them into my current Foxfire?

  See the section on restoring bookmarks in this link - https://support.mozilla.com/kb/Backing+up+and+restoring+bookmarks

• Records and their possible content to automatically sort in alphabetical order?

  Records and their possible content to automatically sort in alphabetical order? I'm tired of having to resort each folder and it's content when I add something new.

  The add-on SortPlaces may interest you.

• Any external device to record and store the video?

  I need an external device (card reader, USB dongle, no matter) allows me to directly record and store video on this subject. My iPhone is already full, so I can't use something like an ordinary lightning flash drive, because he always would force me to record videos in my iPhone and then move it from there.

  Any ideas?

  An external device that can record and store video? Look like a video camera for me.

• record and play clicks using LabVIEW

  I want to LabVIEW to save the my mouse click and then it reads. Now, the mouse clicks are not in LabVIEW. For example I am google.com and then I click on maps, then on images and then the books. I want to labview to record and play back like a TI open google and click on the maps and images and so on. Is this possible with LabVIEW or is there another software OR who done it.

  Thanks in advance

  ; Lab

  Hey Lab.

  As mentioned above, you can do this by using the functions of the library windows. Attached you will find two screws Record cursor Position.vi will record the position of the mouse cursor. You need to change the Clicks.vi of mouse clicks to simulate in the reading order. I hope this helps.

  See you soon

  NOR-khil

• Someone advise me on how to record and remember the actual information from a group of combo boxes?

  I have a set of combo boxes save a devices status information. I would like to record and remind all selections. I know there are properties to access the selected items, but the research on, I do not know the technique to do so. I want to save/recall in XML format. I made an attempt, and he saved the combo box data, but not the selections. Thanks for any help.

  
  

• I cut a record and stuck to a usb device. I want to restore the folder on my computer

  I cut a record and stuck to a usb device. When I tried to open it, he couldn't. I want to restore the folder on my computer. I know there is a way to restore your computer in the last days, but can't remember how. Does anyone know how to do this? This is a very important video of my children.

  System Restore does NOT monitor and restore user data.  You cannot use the system restore to recover a folder deleted from videos created by the user.

  What is the error message you get when you try to open the file on the USB flash drive?  Please do not paraphrase.

  What version of Windows you have, including the service pack?  Do right click my computer and select Properties, if you are not sure.

  In the future, copy and paste files to and from USB devices rather cut and paste or 'move '.  Only delete the original after that you know that the copy is used.