I would replace ODD with Blu - ray on satellite C50 player

Similar Questions

• Satellite U500, replace the DVD RW with Blu - ray?

  Hi all

  Can I replace my Satellite U500 DVD RW with blu - ray or blu - ray rw? and if yes where can I get the part from? or where can I buy origenal Toshiba parts or parts?

  Thank you all

  Hello

  I think that it should be possible, but we need to find an internal Bluray drive with compatible master/slave/c-salt settings.
  Optical disc with bad settings would not be recognized by the BIOS.

  As far as I know that some Toshiba laptops are equipped with an internal bluray drive.
  I recommend a compatible player requesting an ASP.

  Welcome them

• CS5 will still support the MCE Blu - ray on Mac Pro Player?

  It's basically my question:

  CS5 will still support the MCE Blu - ray on Mac Pro Player?

  It is y harly any info the hardware on the web site of Adobe support more. It's just all hype sales!  They used to tell you which disks have been supported, but now that still seems to just be an afterthought in CS5, there is not ehardware in detail everything that is taken in charge and what is not...

  This new MCE Blu - ray player looks like a wonderful solution, but only if Encore CS5 on Mac would support it.

  Thank you!

  I am positive that your Mac Pro has the connectors. The SATA cable it can be somewhat difficult if you're not comfortable deleting some parts with a screwdriver, but I found it very easy.

  Cables SATA sitting around, I had had a little long boxes on the ends of the connector forcing me to have to remove a small amount of plastic from the piece of fan housing. I think that if you buy a kit from OWC cable they include cables that are lower profile but whatever it is, it's not too bad. I just use a dremel to remove a small piece about 1 "x 1" directly above the ports. "

  Here are some instructions I found: http://www.newertech.com/downloads/nwtmpqxe32.pdf (Note: the pages in this guide are all mixed!) These guys here sell a kit that delivers these unused ports of SATA to eSATA ports.

  You will see that they have low profile cable I was referring to that and so they didn't need to cut the case fan at all. I would say just OWC (www.macsales.com), because they know what you are looking for and you can sell a kit that has the cables you need, including 4-pin-power to SATA power. I recommend you to install the two cables while you're here, so if you later decide to add another SATA drive or an SSD, you will not need to take off again. BTW, add an OCZ Vertex 2 60 GB SSd drive as my boot drive for the OS and applications has been the single most visible upgrade I did and makes the Mac Pro just smoke! Same value as I just pasted the small SSD up there in the optical Bay without a mounting kit, and it works great!

  In all honesty, theough, the external enclosure for Blu - Ray works well and is easier to access the drive, because it is now located on my desktop. If you're uncomfortable to disassemble your machine just get quadruple housing interface with the chip set Oxford 934DSB that I can guarantee you that it works out of the box. It cost $140 for the whole machine, not bad compared to the alternatives.

  The reader is this: LG WH10LS30. Looks like it's still on sale for Newegg $79 until the end of the year.

  Housing I have is the following: BYTECC ME535-Limited-BK. Another $60. The OWC, looks a lot prettier in a Mac environment but costs $40 more for the same features all in brushed aluminium.

  I've been creating and burning with yet but Roxio Toast 10 Titanium burns and the authors of the Blu - Ray just wanted to make a CD/DVD

  Good luck!

• replace dvd player SL400 with blue ray player...

  I noticed that there is no lock or lever to remove the dvd on the SL400 player. So if another thinkpad series can have the disk removed with one touch of a latch, how can I remove my DVD from my SL400 so I can replace it with a nice blueray player?

  You unscrew the Central screw under your laptop.

  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-71457

• Qosmio G50-129 - can I have it with Blu - ray?

  I was looking for a laptop for a few weeks now and I fell on the Toshiba Qosmio G50-129. I had already seen the X 300 range, which had the quad processor, I prefer, but I did not like the colors of this laptop "boy racer".

  I thought that the G50 was a reasonable compromise - the high-end core 2 duo processor 800 GB of disk space and lots of features. Only two issues I have with this machine is the 32-bit version of Vista (why don't they provide 64-bit - I'll never understand this) and the lack of Blu - ray.

  Now, I'm not a fanatic of DVD or something else that I appreciate that the Blu - ray is the format that is there to stay. To this end, I have a small collection of DVD Blu - ray that I can play on my PS3 and my DVD Blu - ray player hooked up to my surround sound system.

  Can someone please explain to me why Toshiba produced this stunning notebook G50 - 129, but for A £1 499 it does not include a Blu - ray player? Are they crazy? I don't like that they have lost the race format by backing the wrong horse, I expect to get the Blu - ray on A £1. 5K laptop!

  Unfortunately, Toshiba you lost my business as a result of this omission. Too bad you didn't just accept that Blu - ray is here to stay and accept him as most of the other manufacturers.

  Hello

  As you know different notebooks from different manufacturers have different material combination.
  Is that Qosmio G50 doesn't support Blu - Ray player, but this machine has other benefits.

  It was equipped with the Toshiba Quad Core HD processor, that can turn ordinary DVDs in HD quality.
  So you can play DVDs using the internal player and you will get an almost the same quality as a Bluray drive.
  In this case you don't need to buy a new BluRay drive, but you can watch the DVD movies in HD quality!

  However, I searched here in the forum for similar and found issues these topics:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=39557
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=139719

  It might be interesting for you.

  Finally, I must say that I would not buy a laptop just because of the Blu - Ray player.
  For me it s more interesting a CPU, graphics card, RAM, because these are the parts that are needed for games, multimedia, etc.
  Of course, the blue ray player would be a nice extra but I have a PS3 too and it was already fitted blue ray player

  If this player is not really necessary for me

  Welcome them
  Jimi

• Blu - ray DVD don't play on my laptop when says that it comes with blue-ray program. Windows Vista Aspire 5520 G. Acer Arcade deluxe or windows media player

  When I put in the dvd it happens on arcade deluxe acer appointed as if its going to play then returns to the page of game film and said "an essential element of the player requires periodic updates. new employees may not play if the critical component is not treated quickly. you want to update now? "Yes... not" I would then click on Yes, then, it makes my screen off for a few seconds then returns to game film I try to play the movie and he asks to the page again. What should I do I don't want to buy a new program like winDVD or powerDVD

  If you just got the computer (and it sounds like that) contact the technical assistance service of the manufacturer of the computer (preferably by phone) -http://support.acer.com/ for Aspire 5520.  You may be able to get more details with the serial number of your system.  They will be happy to explain what's on your system, whether or not it can really handle discs Blu - Ray, this software to use to do (they will be able to see what they have installed on your system) and, if necessary, and even how to do because the system is almost new and certainly still under warranty.  I think you need special drivers for the drive (not to mention a disc that can play Blu - Ray discs) and the software may be special to deal with them, even if I am not sure (I don't think that Windows Media Player only is sufficient).  Arcade Delixe might do the trick (although it seems to be only an extension for WMP and unrelated to Blu - Ray), but you need to ask, because it is their software, their training and their computer.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Add to MT 9010 DVD burner with Blu - Ray burner as a second burner

  I am looking for a MT 9010 with a Blu - Ray combo burner. I also want to add a DVD burner as a second burner. Sales said that the system cannot be bought like that. Is it just the way they are sold, or it's physically impossible to add a second burner? There is one external slot open, and it would seem that the motherboard could support. Can I add a DVD burner myself if I get the MT 9010 with the already installed Blu - Ray burner? Thank you.

  Hi jaman57,

  OptiPlex 9010 MT has two optical drive bays and four SATA ports on the motherboard. Yes, you can add a DVD burner yourself with the Blu - Ray burner. The image of the façade is provided below:

  

  Please let me know if you need more assistance.

• How to burn videos full hd to dvd - r with Blu - ray burner for playback on a Blu - ray set top player?

  Hello

  Blu - ray media is still expensive for export small HD projects.

  If I have a Blu - ray burner,

  can I burn BD on DVD-r (4.7 GB) exports

  and play on a Blu - ray set top player?

  alias: DVD-r accepts a laser "blue"?

  (Menus at this point are not necessary)

  For the most part, I'm wanting to burn music videos for 3-4 minutes on DVD-r disks

  full HD Blu - ray without having to use expensive Blu - ray disc every time.

  Thank you

  j

  Ouch!  I don't really remember, but I think I burn with a DVD ol burner ' ordinary.  I have two; a BD - R drive and the DVD-R drive.  Once the image is made I don't think it's important.

  I would say go for it.

  If I'm wrong, I'll blame "Friday afternoon near time to quit smoking."

  Erik

• 2 issues with Blu - ray authoring on CS5

  so first of all, how to make a menu animated seamless? just to get my feet wet on this first draft, I just want a song plays in the background, it goes through each of the pages of the chapter menu. I have not tested on a real player again, because I'm still tweaking menus, but in the still emulator box magazine, on every page the song starts again. isn't this part of the specification of blu - ray? animated seamless menus? Basically what I did I just put the song as audio from the menu query in the first main menu. and supported (you know what that makes me) who who would set the menu motion seamless... not so much... so is anyway to remedy this situation?

  one last thing. I have not yet create the context menu (probably will get to those this weekend), but I'm just brainstorming this and I was wondering if it can be done by specifying blu - ray (or even more precise by specifying EnCS5). the function has 43 chapters, then I put it in place where the pop-up is about 11340 px wide by 75-100 px of height, and scroll the menu off screen? or is the pop-up menu must be contained in the size of the screen? I was just consider make a pop-up menu that have a link to each chapter and was 43 links in all, and once you say the link 6 or so and press the right arrow, it is simply feed more options on the screen. or if I do just like 7 menu of basic text transparent in PS 1620 x 100, with 6 links per menu and have an arrow clickable at the end of each pop-up at the pop-up link depending on whether you press on enter (examply formulated like this:)
  Main menu Chapter 1 Chapter 2 Chapter 3 Chapter 4--> | < - Chapter 5 Chapter 6 Chapter 7 Chapter 8 - > | < - Chapter 9 Chapter 10 chapter 11 Chapter 12 - > | etc., ect. )
  I would prefer that it to be just a long menu continuous, you can fly seamlessly through the (photo 'iPod cover flow' of the iPhone/iPod Touch app iPod), but if not in the specification, OR if its only compatible with BD - J, then is the second scenario (th one listed above) possible with yet?

  BTW: destination project is a BD - R DL because of how much I have pictures, I had to succumb to the DL, so menu size should not be a problem at all with regard to storage problems.

  I guess that's all for now.
  -andrew

  function() {return A.apply (null, [this] .concat ($A (arguments)))}

  I just want a song plays in the background, it goes through each of the pages of the chapter menu. I have not tested on a real player again, because I'm still tweaking menus, but in the still emulator box magazine, on every page the song starts again. isn't this part of the specification of blu - ray? animated seamless menus?

  You must have a menu of several page for seamless playback.

  Steps to follow:

  1. import your menu and open it in the Editor menu

  2. menu-> add new Page

  3. Add all the chapter buttons

  4 Cretae a previous button and the link on the page to home page

  (repeat step 2-4, if you want more chapter menus, you must add the following button and should be linked to the next page)

  4. now add your audio files in the menu

  -> You can download a reading without welding. Reminder Simulator does not support support overview of several pages, so you have to check this on any drive of BD only.

  function() {return A.apply (null, [this] .concat ($A (arguments)))}

  one last thing. I have not yet create the context menu (probably will get to those this weekend), but I'm just brainstorming this and I was wondering if it can be done by specifying blu - ray (or even more precise by specifying EnCS5). the function has 43 chapters, then I put it in place where the pop-up is about 11340 px wide by 75-100 px of height, and scroll the menu off screen? or is the pop-up menu must be contained in the size of the screen?

  Again, you can achieve this by using several page menu.

• help with blu ray

  Hello

  I'm new on blu ray and would like some info please, I have a project edited with premiere cs4, export, I have 2 choices for blu ray-h264 bluray & mpeg 2-Blu-Ray, what are the main differences. Also will be present also transcode the project ready to be burned in yet? I'm looking for the fastest workflow, as I will be hopefully move to HD for most of my editing.

  other assistance would be good.

  concerning

  Baz

  Is there not a "do not transcode" or do you see it but you can not click on it? (not highlighted)

  If any of these questions should be your trouble, well, Yes, I would try a re-install.

  Not sure you will be able to uninstall yet only, I'm afraid you will have to re - install and first and SOUL... also.

  If it will be your decision follow these steps:

  (1) uninstall

  (2) run the uninstall program Adobe CS4 (sometimes you have to install a program to uninstall windows too, but it will ask you if necessary)

  (3) run the uninstall program Adobe CS4

  (4) performance Adobe CS4 uninstaller (points 3 and 4 are not an error)

  (5) disable all security software you have installed and disconnect from the internet (if you have a few sw relative could be a serious problem)

  (6) run the installation (better if it is full) the admin RIGHTS

  (7) go for dinner with the main actress of the film XDCAM (ops, no, you have to insert more than one disc) (in any way later...)

  (8) install the updates (I prefer download them and install as ADMINISTRATOR).

  Save updates will be useful for future resettlement (crossing fingers)

  I hope that did not fail all

  Ciao

  Giorgio

• problem with blu ray player playing

  My computer has played a blu - ray player before and now it will not. It is said that a program is running that is not compatible with what I want to do. I can't find the program. I downloaded an update, she needed and I was in everything I do. It is my first computer and have self taught myself, that's the biggest problem I've had so far. For 4 can hours, I tried to fix it, you please help? Thank you.

  My computer has played a blu - ray player before and now it will not. It is said that a program is running that is not compatible with what I want to do. I can't find the program. I downloaded an update, she needed and I was in everything I do. It is my first computer and have self taught myself, that's the biggest problem I've had so far. For 4 can hours, I tried to fix it, you please help? Thank you.

  =========================================
  The following link might be worth a visit:

  Windows 7 - open the reading and burning CDs, DVDS,
  and the resolution of the problems of Blu - ray discs
  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-and-burning-CDs-DVDs-and-BluRay-discs-Troubleshooter

• Problems with Blu Ray

  I have files on my computer that are 1280 x 720 @ 29 FPS and I am trying to create a reader blu ray quality without loss for the past two weeks. After that I moved on the 29 1920x1080i layout to encode (target 22 Bit Rate, Max 30 sampling rate), the video jump images when I watch on my PS3. I lived at least 15 Blu Ray discs, trying to figure out how to get rid of the skip/delay frames to get a picture smooth and have not been able to understand.

  I create the Blu - Ray in again and everything is going smoothly with that... I really need to know how to get the best quality. I tried all kinds of combinations of bit rate/codecs/etc... Help, please.

  Very well. So I think I have discovered a problem. I was re-encoding M4V files and not the original MP4 to create the blu ray.

  I coded @ 1920 x 1080 30 fps (MPEG Blu Ray, 30 target Bit, 35 Max) with the original MP4 file and the result was great when I played it on my PS3.

• Problem with Blu Ray DVD in Encore without Menus or subtitles

  Hey guys.  I have successfully converted my video and audio for my blu ray project, and I have an English subtitle track, and three menu pages.

  When I saw the project in Encore, the menus and subtitles appear perfectly.

  However, when I export the project to a folder of Blu Ray or Blu Ray picture (I don't have a Blu Ray burner) and play the movie from there, only the audio and the video are there.  There is no options to change the subtitles, and no menu is displayed, even if I put the first piece to be the main menu and not the timeline.

  Can someone help me with this please?  Thank you.

  It is upto the Player how he handles the navigation for the Blu - ray controls. Try using TMT or player software PowerDVD from Cyberlink.

  -Riou.

• My blu - ray willn't play blu - ray player, but I can play regular DVDs how do I play them I paid a lot of money for this window7 with blu - ray for this reason

  can u help me to get the blu - ray to play

  He plays regular DVDs but not blu-rays and I paid for and it says on my hp blu - ray
  Windows7

  See if there are clues in these links.  Perhaps there is an update of the Firmware available for your DVD player?

  Resolution of the DVD and Blu - ray movie problems (Windows 7)
  http://h10025.www1.HP.com/ewfrf/wc/document?CC=au&LC=en&DLC=en&docName=c01897830

  Have you tried this troubleshooting?

  Control Panel\All Control Panel Items\Troubleshooting\Hardware and sound

  Playing discs Blu ray on Windows 7

  http://forums.mydigitallife.info/threads/25240-playing-Blu-ray-discs-on-Windows-7

  http://www.Google.com.au/search?q=problem+playing+Blu+ray+DVD+Windows+7&SourceID=IE7&RLS=com.Microsoft:-to THE: IE-address & ie = & oe = & redir_esc = & ei = 3XwtUZ36EYWkiAeQioG4CA

• Can I put Blu - ray on Qosmio G30 player?

  Hi all

  I have a Qosmio G30-163 with a HD DVD Drive (MATSU * A G8CC00031720) and I am currently trying to upgrade.

  I recently bought a kit to upgrade to 4 GB of RAM from Crucial (CT2KIT25664AC667) and am looking in more upgrades.

  Anyone know if it is possible to replace the HD DVD player with a Blu - ray player?

  My research was led to the Sony Optiarc BC-5500 which I found has the same height dimension (12.7 mm) and also the same interface at the rear (E-IDE) connector.

  I read in the forums that someone has managed to use a similar disc on a Qosmio and that the player may need to be configured for the slave instead of master mode.

  If anyone knows if it would work or that there more information I would be very happy!

  Kind regards

  Luke {color}

  Hello

  I didn't upgrade my Toshiba laptop with a Blue-ray player, but I also read in the forum that some people have managed to replace the drive internal with a blue-ray player.
  I think you should have a good chance to get the blue-ray player working on this Qosmio since the GPU and the interface are compatible.

  Anyway, please post some results after the upgrade.