Satellite U500, replace the DVD RW with Blu - ray?

Hi all

Can I replace my Satellite U500 DVD RW with blu - ray or blu - ray rw? and if yes where can I get the part from? or where can I buy origenal Toshiba parts or parts?

Thank you all

Hello

I think that it should be possible, but we need to find an internal Bluray drive with compatible master/slave/c-salt settings.
Optical disc with bad settings would not be recognized by the BIOS.

As far as I know that some Toshiba laptops are equipped with an internal bluray drive.
I recommend a compatible player requesting an ASP.

Welcome them

Tags: Toshiba

Similar Questions

  • To replace the DVD drive with the second HARD drive on the Probook 6570 b as for the BIOS setting

    After you replace CD/DVD player with HARD drive in the Bay of correspondence, I had a problem with the BIOS. After starting, I received a message 'there is not a boot manager' and CTRL + ALT + DELETE. So is that posible F9 and start to use Option manually hard. Please tell me what I should do to fix this problem.

    Thanks for your advice. I remember what I had to do in the BIOS. I had to choose the Boot Option and excludes "Boot from Bay upgrade". That's all. Of course subsequently followed "save all".

    in respect

    Military

  • Satellite L500D - replacing the DVD - RW drive

    I have a model of Satellite L500D PSL T6A-015003. (portable)

    Recently I placed a CD in the DVD RW drive and the CD did not play.

    When I removed the CD, the disc of black Center that keep the CD etc up to were broken on the disk. The black disc was stuck in the CD I pulled out and a small piece and spring also fell out.

    Can I get a replacement black Center disk or do I have to buy a replacement DVD RW drive. If I have to buy a replacement drive, can someone please tell me where I can buy one, I'm in Toowoomba, Queensland, Australia.

    I have a few details to the reader, these are:

    HL data storage
    Super multi DVD re writer
    Model GT20N (7 7 ATAK)
    Serial number BOCRGTB831062

    I appreciate any help on this

    In my opinion, you should buy another ODD and of course identical. You have any important data on this piece of hardware so use Google and check if you can find an online store in your country where you can order.
    In the worst cases contact the nearest Toshiba service provider and ask if they can order it for you.

  • To replace the DVD drive with the second HARD disk on the pavilion DM4-2000

    Hello

    I would like to remove my laptop DVD drive and replace it with an SSD. It seems that the DVD player does not use the standard format of pins SATA for hard drives, rather than use a slightly smaller connection. Is it possible to connect a laptop SATA drive this in any case and if so, how?

    Any help appreciated,

    Tim

    You need a car adapter. Your laptop uses 12.7 mm optical readers and you need this card:

    https://www.jacobsparts.com/items/HDDBAY-01/

    Here is the Service Manual:

    Manual

    See Page 45 for replacement instructions.

    You place the additional hard drive inside the adapter, then swap the front to make look it good.

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • Add to MT 9010 DVD burner with Blu - Ray burner as a second burner

    I am looking for a MT 9010 with a Blu - Ray combo burner. I also want to add a DVD burner as a second burner. Sales said that the system cannot be bought like that. Is it just the way they are sold, or it's physically impossible to add a second burner? There is one external slot open, and it would seem that the motherboard could support. Can I add a DVD burner myself if I get the MT 9010 with the already installed Blu - Ray burner? Thank you.

    Hi jaman57,

    OptiPlex 9010 MT has two optical drive bays and four SATA ports on the motherboard. Yes, you can add a DVD burner yourself with the Blu - Ray burner. The image of the façade is provided below:

    Please let me know if you need more assistance.

  • How to burn videos full hd to dvd - r with Blu - ray burner for playback on a Blu - ray set top player?

    Hello

    Blu - ray media is still expensive for export small HD projects.

    If I have a Blu - ray burner,

    can I burn BD on DVD-r (4.7 GB) exports

    and play on a Blu - ray set top player?

    alias: DVD-r accepts a laser "blue"?

    (Menus at this point are not necessary)

    For the most part, I'm wanting to burn music videos for 3-4 minutes on DVD-r disks

    full HD Blu - ray without having to use expensive Blu - ray disc every time.

    Thank you

    j

    Ouch!  I don't really remember, but I think I burn with a DVD ol burner ' ordinary.  I have two; a BD - R drive and the DVD-R drive.  Once the image is made I don't think it's important.

    I would say go for it.

    If I'm wrong, I'll blame "Friday afternoon near time to quit smoking."

    Erik

  • Replace the DVD drive with lightscribe on Satellite M60

    Is it possible to buy a lightscribe for the M60 dvd drive replace a normal drive. I have a lot of videos that I made more certain that I bought and I transfer them to DVD, it would also be useful to label the disks that hold backups and plans that we use. I prefer the direct info disc rather then print the labels and stick them onto the disc printing. I can do the work myself if I get hold of the drive and the driver.
    There is still a lot more left life warranty Toshiba in the machine and I am reluctant to update. I have two other M60s in my office and they gave very good service.

    Thank you Russell.

    Hello

    If you take the risk that your warranty would be voided and you find a compatible player then do it. Sorry, but if I were you, I would buy an external USB-DVD/RW lightscribe capabilities. It s fast enough and he would support lightscribe that you need.

    It's the only option I'd choose, but I would´t screws my machine during the warranty only for some purposes "DVD-labeling"...

    Welcome them

  • I have a hp 500-164, can I replace the dvd multi with lightscribe disc drive

    I would like to install a cd/dvd lightscribe burner will of lite - was this computer?

    Hello

    Must correspond to your drive lightscribe internal perspective of CD/DVD.  Review of thisarticle How to HP.

    The issue that you might encounter is the Lightscribe software.  You can download the software from this site or this site. HP's Lightscribe software on this link.

    In addition, you will need a support Lightscribe application. Check with Roxio or Cyberlink to support the application.

  • Satellite M30 - error message after replacing the DVD drive

    Virgin, excused my English ;)
    I have a satellite m30 and I replaced the DVD-cd-rw drive in series with a SLIM NEC ND-6650 DOUBLE LAYER, DVD time bios gives me error
    0203: failure IDE #2
    Is it possible to remove this message?

    Hello

    As far as I know that this message can not be eliminated and it happens every time if you want to use the drive is not compatible. Always is it that all readers may not work with all models of laptops.

    In this case, fundamental problem is the pin assignment. It is not the same in all players.

    Good bye

  • I would replace ODD with Blu - ray on satellite C50 player

    Hello

    I would like to replace my dvd player with a bluray player. What should I do, there are several but most of them is 12.7 mm deep, that fit the slot or do I need a model more thin?

    Are there settings that I need to do to make sure it's working properly which is the master/slave settings

    Thanks in advance.

    > Are there adjustments I would need to do to make sure it's working properly which is the master/slave settings

    It is not possible on optical disc drives that are released for laptops. For most parameters are set to C - SALT (cable select) and this means that the BIOS would pick-up the slave automatically option.
    Of course, his question to the reader. You should use the one compatible.

    As far as I know, the user manual contains information about the compatible optical discs and I recommend you to check this user's manual. Information must be mentioned on it somewhere in the first pages.

  • How to replace the DVD - RW on Satellite P10?

    Hello

    I need to replace the DVD - RW (Mat * a 811 UJ) on my Satellite P10 554. What models are recommended or work without problems?

    Thank you!

    Hello
    I studied a bit and found these compatible discs:
    -The DVD-R /-RW Toshiba SD-R6112
    -DVD - ROM Toshiba SD-C2612 and Matsu drive * a SR-8177
    -The multi-lecteur Matsu DVD * a UJ - 811b
    -Player combo CD-RW/DVD-ROM Toshiba SD-R2412 and TEAC DW-224th-85

  • How to replace the DVD drive on a series of Satellite?

    Could someone give me instructions how to replace the DVD drive?
    I unscrewed a few screws in back and two under keyboard and I still can't get out.
    Any suggestions?

    Thank you
    Select this option.

    I found it!

    It's the single screw! It is under the flap of the memory.

  • Satellite L850 - 17 k - black screen with blue dots

    Satellite L850 - 17 k black screen with blue dots see photo
    It is THE video card, can't find it.

    See photos

    If you see the same on internal and external display LCD, I presume that the video card is faulty.

  • How do I replace the DVD player in a Tecra A5

    Hello

    Does anyone have the details on how to replace the DVD drive in a laptop Toshiba Tecra A5?
    I tried to find a service manual but not had any luck.
    Please can someone help?

    Thank you

    Hello

    The CD/DVD drive can be replaced easily
    The CD/DVD drive is fixed with the screw hidden under the memory module cover.

    You will need to first remove the memory slot cover the GET access to this screw.
    Remove the screw fixing the optical drive module, then use your hand to push the CD/DVD drive and then drag the STRANGE Bay.

    All that s.
    It of really not difficult, but you should always be cautious!

    Good bye

  • Replace the DVD RW Drive (Sftware)

    Hi I have a m8013w desktop pc. I have lightscribe. My DVD drive has failed and I ordered a new one that comes with the lightscribe software. My question is that I have to use the software installation disc which will come with the new drive or am I ready for departure without having to reinstall the software. I have now. I'm on the other procedure like uninstall in Device Manager and replacing the drive. I'm not sure how my software would be affected and the purpose of the disk that is shipped if I have lightscribe. Or are there other things on the installation disc. It is not mentioned in the instructions. Thank you.

    Keith

    You don't need to do anything about this either except to replace the DVD drive... do not worry about the installation of new software or uninstalling the driver from Device Manager.

Maybe you are looking for