I2/I3 magnetic charger compatible with Z3C?

The Thailand just the Z3C this last week and I bought one today.  There is no true "Sony Stores", but I bought in a store licensed to Sony and asked about a magnetic charger, I can see it getting old real quick to keep flipping open the lid of the charger to the USB charger.  They said charger mag Z2 was compatible with the Z3, but not with Z3C.  They don't have one in stock, but are planning to get a few "ARS".

If I2/I3 mag charger is NOT compatible, a mag Z1C charger compatible?

In addition, there is any rubber "bumper" as for iPhones?  I am upgrading to an iPhone4 and really liked having the rubber bumper to protect the phone when he puts on a hard surface, especially if I drag and drop it.  I would have preferred a 'bumper' rather than a 'case', but a case would be Plan B.  Impossible to find all the stores with a compatible box Z3C yet, but I don't know that it won't take long.  BUT... the Z3C rubber bumpers?

DK31 cord has the orientation frames on the pins. If you inspect them closely, they are not identical. You cannot plug it otherwise even when it is used outside of the docking station.

Regarding the cable itself, it is the same cable and Connector for Z1C Z1, Z2, Z2, Z3, Z3C, Z3 Tablet tablet.

I use it for Z1C, Z1 and Z2 Tablet.

You can just buy DK31, remove the two screws from the bottom, remove the cable and use it for your Z2 and Z3C.

Tags: Sony Phones

Similar Questions

  • Apple Watch magnetic charging Dock is compatible with the adapter USB 12W power and if so, is the adaptor 12W shorten the charging time?

    Apple Watch magnetic charging Dock is compatible with the adapter USB 12W power and if so, is the adaptor 12W shorten the charging time?

    Yes and no.

  • Is the magnetic charger for Sony (DK48) compatible with the quick charger (EP881) Sony?

    Which is pretty much on the subject. Will I get the results of quick as expected charge if I connect the quick charger (EP881) with the magnetic charger for Sony (DK48)? I am currently using a double Xperia Z3, and even though I looked this up on Google and here, I couldn't get a good answer.

    I think having a magnetic charger but my decision depends on if it works with fast Charge or not.

    Yes, it will work. It should be the same result that connect the charger directly on your phone.

  • The first generation wireless charger Apple Watch will be compatible with series 2 Watch?

    Apple Watch of first-generation wireless charger won't be compatible with the new watch series 2? I just have to make sure before I buy a new charger wireless with my new watch.

    I guess it will be. There is no differentiation in store for the accessories of the watch.

  • I have problems to make my battery charged, because the cable does not have a link solid with the socket of the phone.  The problem seems compatible with a lot of cables, so I think the problem is with the phone. Can it be fixed?

    I have problems to make my battery charged, because the cable does not have a link solid with the socket of the phone.  The problem seems compatible with a lot of cables, so I think the problem is with the phone. Can it be fixed?

    Probably there is debris and dust in the decision-making of the lightning.  Serve with compressed gas canned (NEVER orally).  If this doesn't help, try electronic contact cleaner has a q - Tip.  Finally, take it to Apple.

  • is 4S charging head compatible with 6 s, but with a lightning cable

    my roommate stole my iphone 6 s loading head.

    but I have a 4's head of original charger from my old phone.

    • It will be compatible with my 6 s?, I 6 s only... its charge data cable, but I'm not sure that it can not be compatible and damge my phone.

      is it allowed to use with 4 loading head

    I don't know what you mean by "charging head"... you mean the double adapter that plugs into the wall socket? If so, then Yes, it is safe. They are two Chargers 5W, and although they were not the iPhone will not draw more power than it needs.

  • Where can I find what kind of phone charges are compatible with the CMF?

    I've recently updated one of our CME to CME v10.0 systems

    I noticed that even if CMEv10 the Firmware support page shows how compatible phone for my 7911 phones is 9-2-1TH1-13,

    My 7911 running load phone 8-4-3-16 that all seem to be save and it works very well.

    So I must conclude that 7911 phone charging 8-4-3-16 is compatible with GCE v10.0

    Where can I go to find out what kind of phone charge versions are compatible with GUY or perhaps, at least, where I can find loads what kind of phone are no longer supported by a version of the CME?

    Hi Jared,

    Specific versions of CMF are tested with the versions listed on the doc "requirements" as you mentioned (linked below), but are not limited to these versions of firmware. The phone charges/firmware is completely independent of the CME/IOS version. And it is often appropriate to upgrade or downgrade the firmware of the phone on CME levels and is fully supported :)

     

    I would look at the upgrade of the firmware 8-4-3 for the 7911 BUT you need go to an intermediate version of the midpoint as 8-5-2 at first because of the "important notes" below;

    Questions for SCCP firmware update

    Note for all the firmware updates SCCP firmware version versions prior to 8.3 (3) for version 8.5 (3) or higher, you must first upgrade your firmware to version 8.5 (2). Once you have upgraded to version 8.5 (2), you can upgrade your IP phone to version 8.5 (3) or later.

    http://www.Cisco.com/en/us/docs/voice_ip_comm/cuipph/firmware/8_5_3/English/release/notes/7900_853.html#wp57602

    See you soon!

    Rob

  • Can I use the magnetic charger shows to recharge my iPhone or it only works with the watch?

    I'm looking to see if my Watch magnetic charger will also charge my iPhone. Can someone help me understand this?

    Hello

    Non - magnetic charge cable only works for load your Apple Watch.

  • Why use my original USB cable charger for more than a year now is startig to show a sign that it is not compatible with the device? o

    I used without problem my USB cable for over a year, it is original Apple and yesterday began to show a sign that it is not compatible with the device. How can not be supported if it's Apple.

    This can occur if the cable is damaged in any way. See: recharge your iPhone, iPad and iPod touch - Apple Support for more information.

  • Are there compatible with ICD problems?

    I have an ICD implanted and would ike to buy an iWatch... is safe?

    Hello

    Apple Watch user's Guide says:

    "Device medical interference Apple Watch contains components and x-rays that emit electromagnetic fields." Apple Watch, some of the bands, the magnetic charge cable Apple Watch, the case of magnetic charge Apple Watch and the magnetic charging Dock Apple Watch contain magnets. These electromagnetic fields and magnets can interfere with defibrillators, heart pacemakers or other medical devices. Maintain a safe distance of separation between your medical device and Apple Watch, his tapes, magnetic charging cable Apple Watch, the case of magnetic charge Apple Watch and the magnetic charging Dock Apple Watch. Consult your doctor and the manufacturer of medical devices for information specific to your medical equipment. Stop using Apple Watch, his tapes, magnetic charging cable Apple Watch, the load magnetic Apple Watch and the magnetic charging Dock Apple Watch case if you suspect that they interfere with your pacemaker, defibrillator, or any other medical device".

    https://help.Apple.com/watch/#/apdcf2ff54e9

  • New 12 watts of power adapter compatible with iPad air 2?

    Is the new adapter of 12 watts of power which is delivered as an accessoriy with iPad compatible with iPad Pro 2 air or it will overheat the battery?

    Thank you

    It is very good.  I use my indiscrimantly brick power 12w with my iPad 2 Air and big-screen iPad Pro.  Output one is always in standard USB 5v and the iPad itself will regulate the current in the charging system.  http://www.Apple.com/power-adapters/ the only difference is 2. 1 out of note on the 2 and 10w. 4 a rating on the 12w, but the device regulates what current is used for billing.

  • security of Norton says that my google toolbar is infected with a virus and I can't move to a newer version, because it is not compatible with firefox 5 or newer, what should I do?

    In the menu tasks of my norton Security window, there is a place to check protection against vulnerabilities. One of the concerns that he has an infection in my toolbar on firefox. He suggests that the best way to resolve was made to upgrade to a new version og. google, because as the still there is apparently no problem for it. When I tried to upgrade to a new version of google to cancel the former an open window and told firefox or most recent is not compatible with it. They said that I should either download something from firefox to fix or connect with firefox. Ido know even where to start, not very informed on the problems of this kind. / your help would be very appreciated. What should I do?

    You can use firefox 3.6, which is old, but always taken in charge and course. However, the best solution is to renounce the use of Google Toolbar because Google no longer support this with firefox, mainly because he has little to offer.

    You can always google bookmark by copying in Firefox. Please take a look at

    I hope that the Norton report, you make reference to simply says that your system has vulnerabilities, rather that he suffers from a real infection (or that he has treated or quarantined malware).

  • Web JetAdmin 10.3.96073: HP Web JetAdmin is not compatible with Windows 10?

    The HP WebJetAdmin client is compatible with Windows 10? I start HP Web JetAdmin 10.3.96073 (10.3 SR8) on a Windows Server 2008 R2 server.

    Today, I tried for the first time load the HP Web JetAdmin console on my machine Windows 10 and to the "customer charge component: DAV supplies UI" step, I get the error "an unexpected error was encountered. The customer will be closed. »

    This happened on 10.3 SR7, I improved, so there is still. People get this to load Windows 10?

    The customer care perfectly fine on the server from localhost, but also one of my boxes of Windows 8. Just does not load on Win10.

    Hello

    The Client lightweight HP WebJetAdmin supports currently up to Windows 8.1, Windows 10 not yet supported.

    You can find the guide below, this is the last version that referred to the current Installer, version 10.3 SR8, as you can see listed on page 3:

    http://h20564.www2.HP.com/hpsc/doc/public/display?docid=c01857435

    Kind regards

    Shlomi

  • The software you are installing has not passed windows logo testing to verify that it is compatible with windows xp

    When installing Football Manager 2011, when its almost finished, he said:

    "The software you are installing is not windows logo testing to verify that it is compatible with windows XP. Please contact your system administrator.
    I guess its because I have a really old laptop, but if someone could confirm this or help it would be greatly appreciated!
    Thanks in advance

    Hello

    Not his because that the game developer has not presented the program of Microsoft
    Logo program that charges a fee to certify programs. It may very well be if he is a large
    producer of games. Also check with the developer of this game for more information.

    I hope this helps.

  • What graphics card is compatible with Hewlett - Packard 147 has?

    Hello! I have a G62-a70SQ laptop with a 512 MB card graph. Recently, I saw that my graphics card is switchable, so I ask which graphics cards are compatible with my motherboard? I want to change because it is too slow for games. Thank you.

    Hello

    Well, let's talk about this way: basically, you can, with a cost, and I think that this cost can be more expensive than buying a new computer because you have to take into account:

    • New price of the card, and WHERE you can buy it because the laptop cards are not the same office maps. You can't buy any normal store,
    • Need new card system (can be),
    • Need new system of cooling because in general more powerful card pumps out more heat (you want more powerful card don't you?).
    • May need new power supply because your current diet is not suitbale for the card. (I ordered a machine with the Nvidia card and I need to order a 90W charger at the same time, not the normal charger 65W. They rejected just my order.)
    • Cost of the work.
    • Packages a lot, a lot of aspirin.

    I hope this helps.

Maybe you are looking for

  • Create the hyperlink in outlook

    When typing email and enter the address of the web site how create hyperlink

  • BEFSX41 mgmnt

    Happending something weird to my router for 3 years. Documentation says to connect the modem cable to the WAN port and connect the PC (s) in one of ports 1-4. When I do that, I can't access the internet OR manage the router via a browser. BUT, if I c

  • of the photo preview

    I can't preview photos on your computer Windows Vista Home Basic to what I open them with a program. What happens is that when I upload photos or even existing photos that are on my computer cannot be displayed by opening with a program rather than s

  • "The print processor does not exist.

    I'm trying to install an XPS printer on windows 7-64, but get the message "Print Processor does not exist". Can someone help me please

  • On the new Interfaces to terminate VPN

    Hello I have 2 Cisco ASA connected in 2 offices who have a fully functional l2l ipsec tunnel.  A new link layer 2 has been installed on each site and I'm her leading to a firewall FE int each site with a private address.  Connenctivity is established