ICM 7.0 loggerb configlogger service termination

SGIA recorder ends with the database of messages obsolete.

any solution for this error? I have icm 7.0 sr3.

Use ICMDBA to synchronize the Pb from A to B (if the b-side is obsolete)

Tags: Cisco Support

Similar Questions

  • Services Terminal Server under Small Business Server 2008

    I have small Business Server 2008 Standard and you bought 5 client access licenses. I'm unable to use the client access licenses - will they work with Small Business Server 2008 Standard? I'm not an expert in this area

    Hello

    Your linked windows question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.

    Please post your question in the Remote Desktop Services TechNet Forum:

    (Services Terminal Server) remote desktop services:
    http://social.technet.Microsoft.com/forums/en/winserverTS/threads/

    Hope the information is useful.

  • I am not able to browse the network. The workstation services and control of browser will not start. The event log shows the workstation service terminated with error code 2250.

    Internet, not able to browse computers on the network

    The computer has internet access, but I am not able to browse the network. The workstation services and control of browser will not start. The event log shows the workstation service terminated with error code 2250. Also in the event log Workstation reports: could not load RDR device driver. Cannot run the sfc in safemode, gives the 0x000006ba error, the rpc server is unavailable. Runs under normal windows, noticed in the registry last run: 0x000003e3 error code (try adding c:\windows\system32\drivesr\i81xnt5.sys to the dllcache)

    I'm puzzled.

    Hello

    I suggest you to send your request in the below link.

    http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

  • is a busy schedule the Services Terminal Server on Vista Home premiun default OS?

    Everything I've read seems to indicate that it is NOT a program on the default Vista operating system

    But my Vista OS seems to have it. Could it have been installed as part of remote support by microsoft staff a few years back?

    If yes how to remove? Or should it be on my system? I don't want to more remote help any or be able to remote access my desktop

    Services Terminal Server service is a standard component of Windows Vista, and it is enabled by default on all my Vista computers.  What have you read that says otherwise?  Can you provide a link?

    To disable:

    1. Press the Windows key + R , type services.msc in the box, and then click OK .
    2. Double-click Terminal Server Services .
    3. Set the Startup type to disabled .
    4. Click OK .
    5. Restart the computer.

    Boulder computer Maven
    Most Microsoft Valuable Professional

  • Windows must now restart because the print spooler service terminated unexpectedly

    I have a PC running on Windows Vista professional that I had for about a year with two printers that have also been all this time, a HP LaserJet 1000 and an Epson SX105.

    This morning, amid a series of PDFs (separate files) printing on LaserJet printers, I suddenly had the following pop-up message:

    "Spooler SubSystem App stopped working and was closed".

    On the Control Panel, I found that my two printers have apparently disappeared.  My first reaction was just close and restart the computer, often kind of seeds.

    To restart, I tried to print again, but I was told that I had to install a printer.  Trying to install a printer, I learned that I could not because of a problem with the spooler.  I looked online to find a solution and one that suits (without touching the registry) seemed to be to check the operation of via Control Panel's print spooler, and then restart.  Oh dear.  What a mistake!  I did this and found that the printers have reappeared, but then about 30 seconds later, I got the following pop-up message:

    "Windows must now restart because the print spooler service terminated unexpectedly.

    Each time it restarts the message comes back after less than a minute and restarts on another 30 seconds later, so I have a chance to try a system restore (I installed the last service pack Vista a couple of days), or something else... it's just in a loop of perpetual reboot, I can't stop restarting Windows.

    How the hell do I?  (I send this message using my Vista laptop and pray the same problem occur here, too, so I don't have to print anything).

    Hello

    Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
    the latest driver).

    Check the Mr Fixit here and if you use the other methods go back and try again later.

    Problems printing and printing errors
    http://support.Microsoft.com/GP/printing_problems

    ------------------------------------------------------
    Logon as administrator

    Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

    You can copy and paste each line except those brackets and press ENTER after each.

    net stop Spooler

    (echo suppression of all print jobs)<-- you="" should="" see="" this="">

    ping localhost n 4 > zero

    del/q %SystemRoot%\system32\spool\printers\*.*

    net start Spooler

    (sound Done!)<-- you="" should="" see="" this="">

    ping localhost n 4 > zero

    Another way
    http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

    Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
    http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

    If you use Control Panel - Classic - printers

    Try after unplugging your printer if necessary.
    ------------------------------------------------------------

    Check this thread if necessary - to stop and erase the spooler

    http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

    ------------------------------------------------------
    Clean the General corruption and replace all the lost files.

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    CheckDisk (chkdsk) runs at startup.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • Host process for Windows Services stopped working and was closed & Windows must now restart because the DCOM Server process Launcher service terminated unexpectely

    my computer keeps stopping and restarting itself. I get the same messages of 2 error: host process for Windows Services stopped working and was closed and; Windows must now restart because the DCOM Server process Launcher service terminated unexpectely. How can I fix? I used the norton support, run analyses of many, nothing has helped.

    None of the above works though... I didn't know by another forum to download Hitman 3.5 http://www.surfright.nl/en/downloads/home that he got rid of a virus that norton, Norton 360 and Malwarebytes antivirus support could not. I had no problem since :)

  • Services Terminal Server lack how can I add?

    Services Terminal Server is absent and an external Seagate replica can prevent from functioning correctly. I have 7 and everything works fine.  To correct an error with the drive, I found this missing according to their help.  How can I add?

    That seems odd... but anyway: Terminal Server Services is actually a full version of Windows Sever (or a Windows Server service), is not a feature that can be added to a client OS.

    The forces of the Terminal Services are now called "Remote Desktop connection", which can be run by typing the command following in the "Run" box of Windows 2000, XP, Vista and 7: mstsc

    Cool fact: Although the program is now called Remote Desktop, the command is always mstsc , because means micrometric Msoft Terminal SServer Cbinding, because it is used to connect to a Terminal Server.
    So, in summary, Terminal Server Services cannot be installed in the OS.

    If it was useful, you can vote by clicking on the green triangle. If it solves the problem, click on propose as answer. Thank you!

  • Services Terminal Server Windows Server 2008 R2 improved Configuration Error IE

    We have a Windows Server 2008 R2 with enhanced IE configuration set to off for all users on the Server Terminal Server services only.  The sessions of the Terminal services Server running Windows XP.  Whenever an end user clicks on Microsoft Outlook in a session, it executes an error from IE Configuration improved mentioning that the site needs to be added to the zone of confidence (subject: internet.)  Unfortunately, I do not know what url he speaks out.  I would like to know what precisely needs to be disabled in order to avoid the mistake of filling.  We have already defined group policy to disable this, but apparently not take after or gpupdate/force runs a logoff of connection occurred.  Of alternatives that anyone can give would be great.  Thank you very much.

    Nick

    This issue is beyond the scope of this site which is for the consumer to related issues.
    To ensure that you get a proper answer, ask either on the Technet site, if it is a type of Pro problem, or MSDN if it's related to the developer
    *

  • Strange behavior NumLock Services Terminal Server

    Hi all

    Hi have a strange problem with each user on my server for Terminal Server Services (W2012, R2)

    When they connect they have NumLock on and he works and then suddenly in the middle of all the work they do with numeric keypad it stops working.

    The strange thing is that the light on the keyboard is always but it does not work, if you put NumLock OFF with the keyboard, then it starts working again.

    The problem repeatedly every day, and because they are most of the accounts of the Department of accounts with this problem is serious because they may think that they write som number and in reallity, they are not.

    I put 2 registry values to always have the keypad locking on, but like I said before that happens in the middle of all that they do.

    I put the registry values are:

    To change the currently registered in user behavior:
    Hkey_Current_User\Control Panel\Keyboard

    To change the behavior of all users:
    HKEY_USERS\. Default\Control Panel\Keyboard

    Hello

    I suggest you to post your query on our Forums TechNet social as this question should be better there.

    Please refer to the reference to the link below to send your request:

    https://social.technet.Microsoft.com/forums/Windows/en-us/home

    Hope this information helps.

    Please get back to us with an update on the issue, we will be happy to help you.

  • Can't remote to my computer via the server that hosts the Services Terminal Server

    Hello

    Can someone give me some indication as to why I wouldn't able to remote into my computer via a work using the Terminal Services server. Version of Windows server, we use currently is SBS 2011. Your help would be much appreciated.

    Kind regards

    RocknRollTim

    Hi Tim,.

    Welcome to the Microsoft Community Forum.

    The question you posted would be better suited to the TechNet community.

    Please visit the link below to find a community that will support what ask you:

    Microsoft TechNet
    http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

    Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

    Thank you

  • Manager remote desktop services / Terminal Server Services Manager

    I've upgraded to Windows 7 Enterprise to Windows XP SP3. I'm used to use the "reset" Terminal Services Manager a 'Down' RDP - TCP or ICA - TCP port. In remote desktop Services Manager, the ability to 'Reset' a 'Down' port is "grayed out". I can't "Reset" of the port. I checked in Windows features and parts under Remote Server administrative tools have been checked. I don't want to create another port. I want to 'Reset' current 'Down' port. I'm a little frustrated that I have to connect to a XP workstation to get this accomplished. Am I missing something? Something is not properly configured? Do I need to install an additional application?

    >"... Any other suggestions? "

    Hey, welcome back.

    Please, go to: Microsoft Support - "XP and Windows Windows Server 2003 servers are not advertised as Terminal Services" at http://support.microsoft.com/kb/281307 and to have your better question, go to the TechNet Forums of MS and place your question here for not more at:http://social.technet.microsoft.com/Forums/en-us/categories.

    Best regards.

    itconcerned

  • Not enough memory RAM for EDU-ICM-1301 - VMware - SAMPLE Training Services - on request in the system class: vSphere install, configure, manage course 5.5

    Hello

    I'm looking for the laboratory "EDU-ICM-1301 - VMware education Services - SAMPLE - in class on request: vSphere install, configure, manage course 5.5" but trying to follow the instructions

    LabFiles\vCenter GA Installer

    1. Double-click autorun.exe , click run.
    2. If the security warning dialog boxes appear, click run to continue.

    the installation does not work with because the memory is not enough.

    Have you ever tried this workshop?

    You have a solution for this problem?

    Thank you

    Hello

    Yes we have seen several times.

    The simple solution is to install ONLY the Client vSphere and not all vCenter Server.  Specified in the manual, but it is up to the user that installation of the client is the option left on the halfway point in the Setup user interface.

    Thank you.

  • Treo 800w and Services Terminal Server

    The user guide available online for the 800w, he said it includes software for Terminal services, aka Remote Desktop. I don't find this software anywhere on the phone or on the supplied CD.

    I found the problem. I got the program installed on the storage card and the program does not support that. Here is a link to the program in case people need in the future.

    http://pdaphonehome.com/forums/attachments/PPC-6700-XV6700/10303d1171200207-wm6_rdp-mobile-remote-desktop-client-WM6-RDP-Finster.zip

    Message is about: Treo 800w (Sprint)

  • Message-"plug-and-play service terminated unexpectedly and needs to close."

    HP laptop, vista, 3 GB of memory, a lot of free space on the disk.  Reading random and unannounced and Possible associated with gaming service failures, Service pack 2 installation fails on the first blue screen "do not shut off...» "98%, seems eventually to restore.  No other obvious symptoms except card ethernet does not start after failure of service pack not installed (code 10).  This seems to be a sick puppy.  A swept of malware. running events logs current Norton Internet Security 2010, for the most part clean.

    https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

    Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until February 26, 2010.

    Microsoft free support for Vista SP2 at the link above.

    See you soon.

    Mick Murphy - Microsoft partner

  • Yes my computer keep blocking down with a messiage errow DCOM SERVICE TERMINATED UNEXPECTEDLY

    THE COMPUTER KEEP BLOCKING DOWN WITH THIS ERROW MESSAGE DCOM SERVICE ENDED IN UNEXPECTED WAYS WHICH COULD DO TO CHANGE THIS PROBLEM

    Hi Frazier834,

    Let us try the following methods.

    Method 1

    Do a virus scan online on your computer. You can do a scan of PC security by clicking on the link http://onecare.live.com/site/en-us/default.htm and clicking on the analysis of a complete Service and accept the contract of

    Method 2

    Try to check if the DCOM Server process Launcher service is running on the computer.

    You must be logged on as administrator to perform these steps.

    1. open administrative tools by clicking the Start button, then Control Panel. In the search box, type Administrative Tools, and then click Administrative Tools.
    2. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    3 right-click the DCOM server process Launcher serviceand then click Properties.
    4. on the general tab, next to Startup type, make sure that Automatic is selected.
    5. If the service is not already running, under Service status, click Start and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
     
    If fails it step above, I suggest you check the event viewer to determine the cause and after return with accuracy of event viewer.

    1. open Event Viewer by clicking the Start button, click Control Panel, clicking system and Maintenance, clicking Administrative Tools, and then double-click Event Viewer. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    2. click on Journal of the events in the left pane.
    3. double-click on an event to view the details of the event.

    What are the information in event logs? (Event Viewer)
    http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer
    Reference:
    http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/aa3373fa-836D-43f2-BCFC-6e566553c818

    I hope this helps.

    Bindu S - Microsoft Support
    Visit our Microsoft answers feedback Forum and let us know what you think

    [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

Maybe you are looking for